RESUMO
Modulating the coordination environment of the metal active center is an effective method to boost the catalytic performances of metal-organic frameworks (MOFs) for oxygen evolution reaction (OER). However, little attention has been paid to the halogen effects on the ligands engineering. Herein, a series of MOFs XâFeNi-MOFs (X = Br, Cl, and F) is constructed with different coordination microenvironments to optimize OER activity. Theoretical calculations reveal that with the increase in electronegativity of halogen ions in terephthalic acid molecular (TPA), the Bader charge of Ni atoms gets larger and the Ni-3d band center and O-2p bands move closer to the Fermi level. This indicates that an increase in ligand negativity of halogen ions in TPA can promote the adsorption ability of catalytic sites to oxygen-containing intermediates and reduce the activation barrier for OER. Experimental also demonstrates that FâFeNi-MOFs exhibit the highest catalytic activity with an ultralow overpotential of 218 mV at 10 mA cm-2, outperforming most otate-of-the-art Fe/Co/Ni-based MOFs catalysts, and the enhanced mass activity by seven times compared with that for the sample before ligands engineering. This work opens a new avenue for the realization of the modulation of NiFeâO bonding by halogen ion in TPA and improves the OER performance of MOFs.
RESUMO
In recent years, catalysts based on transition metal sulfides have garnered extensive attention due to their low cost and excellent electrocatalytic activity in the alkaline oxygen evolution reaction. Here, the preparation of Fe-doped Ni3S2 via a one-step hydrothermal approach is reported by utilizing inexpensive transition metals Ni and Fe. In an alkaline medium, Fe-Ni3S2 exhibits outstanding electrocatalytic activity and stability for the OER, and the current density can reach 10 mA cm-2 with an overpotential of 163 mV. In addition, Pt/C||Fe-Ni3S2 is used as the membrane electrode of the anion exchange membrane water electrolyzer, which is capable of providing a current density of 650 mA cm-2 at a cell voltage of 2.0 V, outperforming the benchmark Ir/C. The principle is revealed that the doping of Fe enhances the electrocatalytic water decomposition ability of Ni3S2 by in situ Raman and in situ X-ray absorption fine structure. The results indicate that the doping of Fe decreases the charge density near Ni atoms, which renders Fe-Ni3S2 more favorable for the adsorption of OH- and the formation of *OO- intermediates. This work puts forward an effective strategy to significantly improve both the alkaline OER activity and stability of low-cost electrocatalysts.
RESUMO
Cobalt (Co)-based materials have been widely investigated as hopeful noble-metal-free alternatives for the oxygen evolution reaction (OER) in alkaline electrolytes, which is crucial for generating hydrogen by water electrolysis. Herein, cobalt-based telluride particles with good electronic conductivity as anodic electrocatalysts were prepared under vacuum by the solid-state strategy, which display remarkable activities toward the OER. Nickel (Ni) and iron (Fe) codoped cobalt telluride (NiFe-CoTe) exhibits an overpotential of 321 mV to achieve a current density of 10 mA cm-2 and a Tafel slope of 51.8 mV dec-1, outperforming the performances of CoTe, CoTe2, and IrO2. According to the DFT calculation, the adsorbed hydroxyl-assisted adsorbate evolution mechanism was proposed for the OER process of NiFe-CoTe, which reveals the synergetic effect toward OER induced by codoping of the Ni and Fe atoms. This work proposes a rational strategy to prepare cobalt-based tellurides as efficient OER catalysts in alkaline electrolytes, providing a new strategy to prepare and regulate metal-based tellurides for catalysis and beyond.
RESUMO
Objective: Ultrasound diagnosis and treatment is easy to perform and takes little time. It is widely used in clinical practice thanks to its non-invasive, real-time, and dynamic characteristics. In the process of ultrasound diagnosis and treatment, the probe may come into contact with the skin, the mucous membranes, and even the sterile parts of the body. However, it is difficult to achieve effective real-time disinfection of the probes after use and the probes are often reused, leading to the possibility of the probes carrying multiple pathogenic bacteria. At present, the processing methods for probes at home and abroad mainly include probe cleaning, probe disinfection, and physical isolation (using probe covers or sheaths). Yet, each approach has its limitations and cannot completely prevent probe contamination and infections caused by ultrasound diagnosis and treatment. For example, when condoms are used as the probe sheath, the rate of condom breakage is relatively high. The cutting and fixing of cling film or freezer bags involves complicated procedures and is difficult to perform. Disposable plastic gloves are prone to falling off and causing contamination and are hence not in compliance with the principles of sterility. Furthermore, the imaging effect of disposable plastic gloves is poor. Therefore, there is an urgent need to explore new materials to make probe covers that can not only wrap tightly around the ultrasound probe, but also help achieve effective protection and rapid reuse. Based on the concept of physical barriers, we developed in this study a heat sealing system for the rapid reuse of ultrasound probes. The system uses a heat sealing device to shrink the protective film so that it wraps tightly against the surface of the ultrasound probe, allowing for the rapid reuse of the probe while reducing the risk of nosocomial infections. The purpose of this study is to design a heat sealing system for the rapid reuse of ultrasound probes and to verify its application effect on the rapid reuse of ultrasound probes. Methods: 1) The heat sealing system for the rapid reuse of ultrasound probes was designed and tested by integrating medical and engineering methods. The system included a protective film (a multilayer co-extruded polyolefin thermal shrinkable film) and a heat sealing device, which included heating wire components, a blower, a photoelectric switch, temperature sensors, a control and drive circuit board, etc. According to the principle of thermal shrinkage, the ultrasound probe equipped with thermal shrinkable film was rapidly heated and the film would wrap closely around the ultrasound probe placed on the top of the heat sealing machine. The ultrasound probe was ready for use after the thermal shrinkage process finished. Temperature sensors were installed on the surface of the probe to test the thermal insulation performance of the system. The operation procedures of the system are as follows: placing the ultrasound probe covered with the protective film in a certain space above the protective air vent, which is detected by the photoelectric switch; the heating device heats the thermal shrinkable film with a constant flow of hot air at a set temperature value. Then, the probe is rotated so that the thermal shrinkable film will quickly wrap around the ultrasound probe. After the heat shrinking is completed, the probe can be used directly. 2) Using the convenience sampling method, 90 patients from the Department of Anesthesiology and Perioperative Medicine, the First Affiliated Hospital of Xi'an Jiaotong University were included as the research subjects. All patients were going to undergo arterial puncture under ultrasound guidance. The subjects were divided into 3 groups, with 30 patients in each group. Three measures commonly applied in clinical practice were used to process the probes in the three groups and water-soluble fluorescent labeling was applied around the puncture site before use. In the experimental group, the probes were processed with the heat sealing system. The standard operating procedures of the heat sealing system for rapid reuse of ultrasonic probes were performed to cover the ultrasonic probe and form a physical barrier to prevent probe contamination. There were two control groups. In control group 1, disinfection wipes containing double-chain quaternary ammonium salt were used to repeatedly wipe the surface of the probe for 10-15 times, and then the probe was ready for use once it dried up. In the control group 2, a disposable protective sheath was used to cover the front end of the probe and the handle end of the sheath was tied up with threads. Comparison of the water-soluble fluorescent labeling on the surface of the probe (which reflected the colony residues on the surface of the probe) before and after use and the reuse time (i.e., the lapse of time from the end of the first use to the beginning of the second use) were made between the experimental group and the two control groups. Results: 1) The temperature inside the ultrasound probe was below 40 â and the heat sealing system for rapid reuse did not affect the performance of the ultrasound probe. 2) The reuse time in the heat sealing system group, as represented by (median [P25, P75]), was (8.00 [7.00, 10.00]) s, which was significantly lower than those of the disinfection wipe group at (95.50 [8.00, 214.00]) s and the protective sleeve group at (25.00 [8.00, 51.00]) s, with the differences being statistically significant (P<0.05). No fluorescence residue was found on the probe in either the heat sealing system group or the protective sheath group after use. The fluorescence residue in the heat sealing system group was significantly lower than that in the disinfection wipes group, showing statistically significant differences (χ 2=45.882, P<0.05). Conclusion: The thermal shrinkable film designed and developed in this study can be cut and trimmed according to the size of the equipment. When the film is heated, it shrinks and wraps tightly around the equipment, forming a sturdy protective layer. With the heat sealing system for rapid reuse of ultrasonic probes, we have realized the semi-automatic connection between the thermal shrinkable film and the heating device, reducing the amount of time-consuming and complicated manual operation. Furthermore, the average reuse time is shortened and the system is easy to use, which contributes to improvements in the reuse and operation efficiency of ultrasound probes. The heat sealing system reduces colony residues on the surface of the probe and forms an effective physical barrier on the probe. No probes were damaged in the study. The heat sealing system for rapid reuse of ultrasonic probes can be used as a new method to process the ultrasonic probes.
Assuntos
Ultrassonografia , Ultrassonografia/instrumentação , Ultrassonografia/métodos , Temperatura Alta , Reutilização de Equipamento , Humanos , Desinfecção/métodos , Desinfecção/instrumentação , Desenho de Equipamento , Contaminação de Equipamentos/prevenção & controleRESUMO
Developing non-platinum group metal catalysts for the sluggish hydrogen oxidation reaction (HOR) is critical for alkaline fuel cells. To date, Ni-based materials are the most promising candidates but still suffer from insufficient performance. Herein, we report an unconventional hcp/fcc Ni (u-hcp/fcc Ni) heteronanocrystal with multiple epitaxial hcp/fcc heterointerfaces and coherent twin boundaries, generating rugged surfaces with plenty of asymmetric convex sites. Systematic analyses discover that such convex sites enable the adsorption of *H in unusual bridge positions with weakened binding energy, circumventing the over-strong *H adsorption on traditional hollow positions, and simultaneously stabilizing interfacial *H2O. It thus synergistically optimizes the HOR thermodynamic process as well as reduces the kinetic barrier of the rate-determining Volmer step. Consequently, the developed u-hcp/fcc Ni exhibits the top-rank alkaline HOR activity with a mass activity of 40.6â mA mgNi -1 (6.3â times higher than fcc Ni control) together with superior stability and high CO-tolerance. These results provide a paradigm for designing high-performance catalysts by shifting the adsorption state of intermediates through configuring surface sites.
RESUMO
Molecular catalysts have been receiving increasingly attention in the electrochemical CO2 reduction reaction (CO2 RR) with attractive features such as precise catalytic sites and tunable ligands. However, the insufficient activity and low selectivity of deep reduction products restrain the utilization of molecular catalysts in CO2 RR. Herein, a donor-acceptor modified Cu porphyrin (CuTAPP) is developed, in which amino groups are linked to donate electrons toward the central CuN4 site to enhance the CO2 RR activity. The CuTAPP catalyst exhibited an excellent CO2 -to-CH4 electroreduction performance, including a high CH4 partial current density of 290.5 mA cm-2 and a corresponding Faradaic efficiency of 54.8% at -1.63 V versus reversible hydrogen electrode in flow cells. Density functional theory calculations indicated that CuTAPP presented a much lower energy gap in the pathway of producing *CHO than Cu porphyrin without amino group modification. This work suggests a useful strategy of introducing designed donor-acceptor structures into molecular catalysts for enhancing electrochemical CO2 conversion toward deep reduction products.
RESUMO
The design and screening of electrocatalysts for gas evolution reactions suffer from little understanding of multiphase processes at the electrode-electrolyte interface. Due to the complexity of the multiphase interface, it is still a great challenge to capture gas evolution dynamics under operando conditions to precisely portray the intrinsic catalytic performance of the interface. Here, we establish a single particle imaging method to real-time monitor a potential-dependent vertical motion or hopping of electrocatalysts induced by electrogenerated gas nanobubbles. The hopping feature of a single particle is closely correlated with intrinsic activities of electrocatalysts and thus is developed as an indicator to evaluate gas evolution performance of various electrocatalysts. This optical indicator diminishes interference from heterogeneous morphologies, non-Faradaic processes, and parasitic side reactions that are unavoidable in conventional electrochemical measurements, therefore enabling precise evaluation and high-throughput screening of catalysts for gas evolution systems.
Assuntos
Eletrodos , CatáliseRESUMO
Tandem catalysis provides an economical and energy-efficient process for the production of fine chemicals. In this work, we demonstrate that a rationally synthesized carbon-based catalyst with atomically dispersed dual Fe-Al sites (ADD-Fe-Al) achieves superior catalytic activity for the one-pot oxidative carboxylation of olefins (conversion â¼97%, selectivity â¼91%), where the yield of target product over ADD-Fe-Al is at least 62% higher than that of monometallic counterparts. The kinetic results reveal that the excellent catalytic performance arises from the synergistic effect between Fe (oxidation site) and Al sites (cycloaddition site), where the efficient CO2 cycloaddition with epoxides in the presence of Al sites (3.91 wt %) positively shifts the oxidation equilibrium to olefin epoxidation over Fe sites (0.89 wt %). This work not only offers an advanced catalyst for oxidative carboxylation of olefins but also opens up an avenue for the rational design of multifunctional catalysts for tandem catalytic reactions in the future.
RESUMO
The electrocatalytic carbon dioxide (CO2 ) reduction is a promising approach for converting this greenhouse gas into value-added chemicals, while the capability of producing products with longer carbon chains (Cn >3) is limited. Herein, we demonstrate the Br-assisted electrocatalytic oxidation of ethylene (C2 H4 ), a major CO2 electroreduction product, into 2-bromoethanol by electro-generated bromine on metal phthalocyanine catalysts. Due to the preferential formation of Br2 over *O or Cl2 to activate the C=C bond, a high partial current density of producing 2-bromoethanol (46.6â mAâ cm-2 ) was obtained with 87.2 % Faradaic efficiency. Further coupling with the electrocatalytic nitrite reduction to ammonia at the cathode allowed the production of triethanolamine with six carbon atoms. Moreover, by coupling a CO2 electrolysis cell for in situ C2 H4 generation and a C2 H4 oxidation/nitrite reduction cell, the capability of upgrading of CO2 and nitrite into triethanolamine was demonstrated.
RESUMO
Electronic structure modulation among multiple metal sites is key to the design of efficient catalysts. Most studies have focused on regulating 3d transition-metal active ions through other d-block metals, while few have utilized f-block metals. Herein, we report a new class of catalyst, namely, UCoO4 with alternative CoO6 and 5f-related UO6 octahedra, as a unique example of a 5f-covalent compound that exhibits enhanced electrocatalytic oxygen evolution reaction (OER) activity because of the presence of the U 5f-O 2p-Co 3d network. UCoO4 exhibits a low overpotential of 250 mV at 10 mA cm-2, surpassing other unitary cobalt-based catalysts ever reported. X-ray absorption spectroscopy revealed that the Co2+ ion in pristine UCoO4 was converted to high-valence Co3+/4+, while U6+ remained unchanged during the OER, indicating that only Co was the active site. Density functional theory calculations demonstrated that the OER activity of Co3+/4+ was synergistically enhanced by the covalent bonding of U6+-5f in the U 5f-O 2p-Co 3d network. This study opens new avenues for the realization of electronic structure manipulation via unique 5f involvement.
RESUMO
As potential nuclear waste host matrices, two series of uranium-doped Nd2Zr2O7 nanoparticles were successfully synthesized using an optimized molten salt method in an air atmosphere. Our combined X-ray diffraction, Raman and X-ray absorption fine-structure (XAFS) spectroscopy studies reveal that uranium ions can precisely substitute the Nd site to form an Nd2-xUxZr2O7+δ (0 ≤ x ≤ 0.2) system and the Zr site to form an Nd2Zr2-yUyO7+δ (0 ≤ y ≤ 0.4) system without any impurity phase. With increasing U concentration, there is a phase transition from pyrochlore (Fd3m) to defect fluorite (Fm3m) structures in both series of U-doped Nd2Zr2O7. The XAFS analysis indicates that uranium exists in the form of high-valent U6+ in all samples. To balance the extra charge for substituting Nd3+ or Zr4+ by U6+, additional oxygen is introduced accompanied by a large structural distortion; however, the Nd2Zr1.6U0.4O7+δ sample with high U loading (20â mol%) still maintains a regular fluorite structure, indicating the good solubility of the Nd2Zr2O7 host for uranium. This study is, to the best of our knowledge, the first systematic study on U-incorporated Nd2Zr2O7 synthesized via the molten salt method and provides convincing evidence for the feasibility of accurately immobilizing U at specific sites.
RESUMO
The development of actinide materials has provided new strategies for the utilization of nuclear waste, such as depleted uranium, a mildly radioactive waste in the nuclear power industry, which could be a precious resource for many fields, especially water splitting. The catalytic performance of water splitting is limited by the slow kinetics of the oxygen evolution reaction (OER), and it is extremely challenging to design efficient OER catalysts that are highly stable and inexpensive. Here, we design and describe a series of U5-35%-Co3O4 electrocatalysts, which were synthesized using uranyl nitrate as a precursor via a simple and scalable method. Interestingly, when the U/Co molar ratio was 20%, a UCoO4/Co3O4 heterojunction formed with high catalytic efficiency and excellent long-term electrolytic stability. The UCoO4/Co3O4 heterojunction catalyst shows a lower overpotential (280 mV) at a current density of 10 mA cm-2, and the slope of Tafel is 43.8 mV decade-1 in a 0.1 M KOH alkaline solution. Soft X-ray absorption spectroscopy shows that the cooperative effect of UCoO4 and Co3O4 can improve the electrochemical activity of the material. This study produced an active U/Co-based catalyst for OER, which provides a simple, scalable, low-cost, and highly efficient catalyst for overall water splitting.
RESUMO
Investigations of bacterial resistance strategies can aid in the development of new antimicrobial drugs as a countermeasure to the increasing worldwide prevalence of bacterial antibiotic resistance. One such strategy involves the TipA class of transcription factors, which constitute minimal autoregulated multidrug resistance (MDR) systems against diverse antibiotics. However, we have insufficient information regarding how antibiotic binding induces transcriptional activation to design molecules that could interfere with this process. To learn more, we determined the crystal structure of SkgA from Caulobacter crescentus as a representative TipA protein. We identified an unexpected spatial orientation and location of the antibiotic-binding TipAS effector domain in the apo state. We observed that the α6-α7 region of the TipAS domain, which is canonically responsible for forming the lid of antibiotic-binding cleft to tightly enclose the bound antibiotic, is involved in the dimeric interface and stabilized via interaction with the DNA-binding domain in the apo state. Further structural and biochemical analyses demonstrated that the unliganded TipAS domain sterically hinders promoter DNA binding but undergoes a remarkable conformational shift upon antibiotic binding to release this autoinhibition via a switch of its α6-α7 region. Hence, the promoters for MDR genes including tipA and RNA polymerases become available for transcription, enabling efficient antibiotic resistance. These insights into the molecular mechanism of activation of TipA proteins advance our understanding of TipA proteins, as well as bacterial MDR systems, and may provide important clues to block bacterial resistance.
Assuntos
Antibacterianos/metabolismo , Proteínas de Bactérias/metabolismo , Transativadores/metabolismo , Sequência de Aminoácidos , Antibacterianos/química , Antibacterianos/farmacologia , Proteínas de Bactérias/antagonistas & inibidores , Proteínas de Bactérias/química , Caulobacter crescentus/metabolismo , Cristalografia por Raios X , DNA/química , DNA/metabolismo , Dimerização , Farmacorresistência Bacteriana Múltipla/genética , Cinética , Regiões Promotoras Genéticas , Ligação Proteica , Conformação Proteica em alfa-Hélice , Estrutura Terciária de Proteína , Alinhamento de Sequência , Transativadores/antagonistas & inibidores , Transativadores/química , Ativação Transcricional/efeitos dos fármacosRESUMO
The supported metal catalysts on scaffolds usually reveal multiple active sites, resulting in the occurrence of side reaction and being detrimental to the achievement of highly consistent catalysis. Single atom catalysts (SACs), possessed with highly consistent single active sites, have great potentials for overcoming such issues. Herein, the authors used SACs to modulate kinetic process of gas sensitive reaction. The supported Pd SACs, established by a metal organic frameworks-templated approach, promoted greatly the detection capacity to hydrogen sulfide (H2 S) gas with a very high sensitivity and selectivity. Density functional theory calculations show that the supported Pd SACs not only increased the number of electrons transferring from H2 S molecules to Pd SACs, but strengthened surface affinity to H2 S. Moreover, the HS bonds of H2 S molecules absorbed on Pd atomic sites are more likely to be dehydrogenated directly into sulfur species. Significantly, quasi in situ XPS analysis confirmed the presence of sulfur species during H2 S detection process, which may be a major cause for such detection signal. Based on these results, a suitable sensing principle for H2 S gas driven by Pd SACs was put forward. This work will enrich catalytic electronics in chemiresistive gas sensing.
Assuntos
Sulfeto de Hidrogênio , Estruturas Metalorgânicas , Catálise , Metais , EnxofreRESUMO
Surface terminations of two-dimensional MXene (Ti3 C2 Tx ) considerably impact its physicochemical properties. Commonly used etching methods usually introduce -F surface terminations or metallic impurities in MXene. We present a new molten-salt-assisted electrochemical etching method to synthesize fluorine-free Ti3 C2 Cl2 . Using electrons as reaction agents, cathode reduction and anode etching can be spatially isolated; thus, no metallics are present in the Ti3 C2 Cl2 product. The surface terminations can be in situ modified from -Cl to -O and/or -S, which considerably shortens the modification steps and enriches the variety of surface terminations. The obtained -O-terminated Ti3 C2 Tx are excellent electrode materials for supercapacitors, exhibiting capacitances of 225â F g-1 at 1.0â Ag-1 , good rate performance (91.1 % at 10â Ag-1 ), and excellent capacitance retention (100 % after 10000 charge/discharge cycles at 10â Ag-1 ), which is superior to multi-layered Ti3 C2 Tx prepared by other etching methods.
RESUMO
Dry reforming of methane (DRM) is a feasible solution to address the reduction of greenhouse gases stipulated by the Paris Climate Agreement, given that it adds value by converting trivial gases, CO2 and CH4 , simultaneously into useful syngas. However, the conventional Ni catalyst undergoes deactivation due to carbon coking and particle agglomeration. Here we demonstrate a highly efficient and durable DRM catalyst: exsolved Co-Ni-Fe ternary alloy nanoparticles on the layered perovskite PrBaMn1.7 Co0.1 Ni0.2 O5+δ produced by topotactic exsolution. This method readily allows the generation of a larger number of exsolved nanoparticles with enhanced catalytic activity above that of Ni monometallic and Co-Ni bimetallic particles. The enhancement is achieved by the upshift of the d-band center of Co-Ni-Fe relative to those of Co-Ni and Ni, meaning easier charge donation to the adsorbate. Furthermore, the exsolved catalyst shows exceptional stability, with continuous DRM operation for about 350â hours.
RESUMO
Dual-band-gap systems are promising for solar water splitting due to their excellent light-harvesting capability and high charge-separation efficiency. However, a fundamental understanding of interfacial charge-transfer behavior in the dual-band-gap configuration is still incomplete. Taking CdS/reduced graphene oxide (CdS/RGO) nanoheterojunctions as a model solar water splitting system, we attempt here to highlight the interaction-dependent interfacial charge-transfer behavior based on both experimental observations and theoretical calculations. Experimental evidence points to charge transfer at the CdS-RGO interface playing a dominant role in the photocatalytic hydrogen production activity. By tuning the degree of reduction of RGO, the interfacial interaction, and, thereby, the charge transfer can be controlled at the CdS-RGO interface. This observation is supported by theoretical analysis, where we find that the interfacial charge transfer is a balance between the effective single-electron- and hole-transfer probability and the surface free electron and hole concentration, both of which are related to the surface potential and tailored by interfacial interaction. This mechanism is applicable to all systems for solar water splitting, providing a useful guidance for the design and study of heterointerfaces for high-efficiency energy conversion.
RESUMO
Different energy systems are closely connected with each other in industrial-park integrated energy system (IES). The energy demand forecasting has important impact on IES dispatching and planning. This paper proposes an approach of short-term energy forecasting for electricity, heat, and gas by employing deep multitask learning whose structure is constructed by deep belief network (DBN) and multitask regression layer. The DBN can extract abstract and effective characteristics in an unsupervised fashion, and the multitask regression layer above the DBN is used for supervised prediction. Then, subject to condition of practical demand and model integrity, the whole energy forecasting model is introduced, including preprocessing, normalization, input properties, training stage, and evaluating indicator. Finally, the validity of the algorithm and the accuracy of the energy forecasts for an industrial-park IES system are verified through the simulations using actual operating data from load system. The positive results turn out that the deep multitask learning has great prospects for load forecast.
RESUMO
The microscopic structures of ThF4-LiF and ThF4-LiF-BeF2 molten salts have been systematically investigated by in situ high-temperature X-ray absorption fine-structure (XAFS) spectroscopy combined with molecular-dynamics (MD) simulations. The results reveal that the local structure of thorium ions was much more disordered in the molten state of the ThF4-LiF-BeF2 salt than that in ThF4-LiF, implying that the Th and F ions were exchanged more frequently in the presence of Be ions. The structures of medium-range-ordered coordination shells (such as Th-F2nd and Th-Th) have been emphasized by experimental and theoretical XAFS analysis, and they play a significant role in transport properties. Using MD simulations, the bonding properties in the molten ThF4-LiF and ThF4-LiF-BeF2 mixtures were evaluated, confirming the above conclusion. This research is, to the best of our knowledge, the first systematic study on the ThF4-LiF-BeF2 molten salt via quantitative in situ XAFS analysis and MD simulations.
RESUMO
Traditional analytical methods of thorium contamination suffer from several disadvantages such as time-consuming procedures and an equipment-intensive nature, leading to substantial challenges in rapid and on-site monitoring of thorium concentrations in complex natural water systems. We report here the first case of a luminescent metal organic framework based probe (ThP-1) for highly sensitive and selective self-calibrated sensing of Th4+ contamination in natural fresh water media with a notably facilitated detection procedure. The detection limit of ThP-1 was determined to be 24.2 µg/L, much lower than the thorium contamination standard of 246 µg/L in drinking water defined by the World Health Organization. Importantly, the detection procedure based on the rarely reported self-calibration manner is greatly beneficial in improving the detection accuracy. The self-calibrated luminescence evolution process shows a great anti-interference ability capable of detecting thorium contamination in a wide concentration range from 24.2 µg/L to 300 mg/L, which can not be achieved directly by the traditional methods. The Th4+-selective luminescence response originates from the selective uptake and efficient enrichment of Th4+ by the host framework of ThP-1 through inner-sphere coordination, which is further confirmed by batch experiments, X-ray absorption spectroscopic study, and DFT calculations.