RESUMO
Sulfide electrolytes promise superior ion conduction in all-solid-state lithium (Li) metal batteries, while suffering harsh hurdles including interior dendrite growth and instability against Li and moist air. A prerequisite for solving such issues is to uncover the nature of the Li/sulfide interface. Herein, air-stable Li4SnS4 (LSS) as a prototypical sulfide electrolyte is selected to visualize the dynamic evolution and failure of the Li/sulfide interface by cryo-electron microscopy. The interfacial parasitic reaction (2Li + 2Li4SnS4 = 5Li2S + Sn2S3) is validated by direct detection of randomly distributed Li2S and Sn2S3 crystals. A bifunctional buffering layer is consequently introduced by self-diffusion of halide into LSS. Both the interface and the grain boundaries in LSS have been stabilized, eliminating the growing path of Li dendrites. The buffering layer enables the durability of Li symmetric cell (1500 h) and high-capacity retention of the LiFePO4 full-cell (95%). This work provides new insights into the hierarchical design of sulfide electrolytes.
RESUMO
Non-equilibrium kinetic intermediates are usually preferentially generated instead of thermodynamic stable phases in the solid-state synthesis of layered oxides. Understanding the inherent complexity between thermodynamics and kinetics is important for designing high cationic ordering cathodes. Single-crystal strategy is an effective way to solve the intrinsic chemo-mechanical problems of Ni-rich cathodes. However, the synthesis of high-performance single-crystal is very challenging. Herein, the kinetic reaction path and the formation mechanism of non-equilibrium intermediates in the synthesis of single-crystal Co-free Ni-rich were explored. We demonstrate that the formation of non-equilibrium intermediate and the electrochemical-thermo-mechanical failure can be effectively inhibited by driving low-temperature topotactic lithiation. This work provides a basis for designing high-performance single-crystal Ni-rich layered oxides by regulating the defective structures.
RESUMO
The interactions between carbon nanotubes (CNTs) and biologics have been commonly studied by various microscopy and spectroscopy methods. We tried biomolecular interaction analysis to measure the kinetic interactions between proteins and CNTs. The analysis demonstrated that wheat germ agglutinin (WGA) and other proteins have high affinity toward carboxylated CNT (f-MWCNT) but essentially no binding to normal CNT (p-MWCNT). The binding of f-MWCNT-protein showed dose dependence, and the observed kinetic constants were in the range of 10(-9) to 10(-11) M with very small off-rates (10(-3) to 10(-7) s(-1)), indicating a relatively tight and stable f-MWCNT-protein complex formation. Interestingly in hemolysis assay, p-MWCNT showed good biocompatibility, f-MWCNT caused 30% hemolysis, but WGA-coated f-MWCNT did not show hemolysis. Furthermore, the f-MWCNT-WGA complex demonstrated enhanced cytotoxicity toward cancer cells, perhaps through the glycoproteins expressed on the cells' surface. Taken together, biomolecular interaction analysis is a precise method that might be useful in evaluating the binding affinity of biologics to CNTs and in predicting biological actions.
Assuntos
Materiais Biocompatíveis/química , Nanotubos de Carbono/química , Aglutininas do Germe de Trigo/química , Animais , Materiais Biocompatíveis/farmacologia , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Galinhas , Relação Dose-Resposta a Droga , Hemólise , Humanos , Cinética , Leucócitos , Relação Estrutura-AtividadeRESUMO
Objective: In this work, we propose a novel method for constructing whole-brain spatio-temporal multilayer functional connectivity networks (FCNs) and four innovative rich-club metrics. Methods: Spatio-temporal multilayer FCNs achieve a high-order representation of the spatio-temporal dynamic characteristics of brain networks by combining the sliding time window method with graph theory and hypergraph theory. The four proposed rich-club scales are based on the dynamic changes in rich-club node identity, providing a parameterized description of the topological dynamic characteristics of brain networks from both temporal and spatial perspectives. The proposed method was validated in three independent differential analysis experiments: male-female gender difference analysis, analysis of abnormality in patients with autism spectrum disorders (ASD), and individual difference analysis. Results: The proposed method yielded results consistent with previous relevant studies and revealed some innovative findings. For instance, the dynamic topological characteristics of specific white matter regions effectively reflected individual differences. The increased abnormality in internal functional connectivity within the basal ganglia may be a contributing factor to the occurrence of repetitive or restrictive behaviors in ASD patients. Conclusion: The proposed methodology provides an efficacious approach for constructing whole-brain spatio-temporal multilayer FCNs and conducting analysis of their dynamic topological structures. The dynamic topological characteristics of spatio-temporal multilayer FCNs may offer new insights into physiological variations and pathological abnormalities in neuroscience.
RESUMO
Lithium-sulfur (Li-S) batteries, operated through the interconversion between sulfur and solid-state lithium sulfide, are regarded as next-generation energy storage systems. However, the sluggish kinetics of lithium sulfide deposition/dissolution, caused by its insoluble and insulated nature, hampers the practical use of Li-S batteries. Herein, leaf-like carbon scaffold (LCS) with the modification of Mo2C clusters (Mo2C@LCS) is reported as host material of sulfur powder. During cycles, the dissociative Mo ions at the Mo2C@LCS/electrolyte interface are detected to exhibit competitive binding energy with Li ions for lithium sulfide anions, which disrupts the deposition behavior of crystalline lithium sulfide and trends a shift in the configuration of lithium sulfide toward an amorphous structure. Combining the related electrochemical study and first-principle calculation, it is revealed that the formation of amorphous lithium sulfides shows significantly improved kinetics for lithium sulfide deposition and decomposition. As a result, the obtained Mo2C@LCS/S cathode shows an ultralow capacity decay rate of 0.015% per cycle at a high mass loading of 9.5 mg cm-2 after 700 cycles. More strikingly, an ultrahigh sulfur loading of 61.2 mg cm-2 can also be achieved. This work defines an efficacious strategy to advance the commercialization of Mo2C@LCS host for Li-S batteries.
RESUMO
Modifying the interface between the lithium metal anode (LMA) and the electrolyte is crucial for achieving high-performance lithium metal batteries (LMBs). Recent research indicates that altering Li-metal interfaces with polymer coatings is an effective approach to extend LMBs' cycling lifespan. However, the physical properties of these polymer-Li interfaces have not yet been fully investigated. Therefore, the structural stability, electronic conductivity, and ionic conductivity of polymer-Li interfaces were examined based on first-principles calculations in this study. Several representative polymer compounds utilized in LMBs were assessed, including polyacrylonitrile (PAN), polyvinylidene fluoride (PVDF), polytetrafluoroethylene (PTFE), and polyethylene oxide (PEO). Our research revealed that lithium fluoride is formed upon fluoropolymer degradation, explaining previously observed experimental results. Polymers containing nitrile groups exhibit strong adhesion to lithium metal, facilitating the formation of the stable interface layer. Regarding electronic conductivity, the fluoropolymers preserve a good insulating property, which diminished marginally in the presence of lithium, but that of PAN and PEO significantly reduces. Additionally, lithium diffusion on PTFE and PEO demonstrates low diffusion barriers and high coefficients, enabling easy transportation. Overall, our investigation reveals that the interfaces formed between various polymers and LMA have distinct characteristics, providing new fundamental insights for designing composites with tailored interface properties.
RESUMO
The solid electrolyte interphase (SEI) with lithium fluoride (LiF) is critical to the performance of lithium metal batteries (LMBs) due to its high stability and mechanical properties. However, the low Li ion conductivity of LiF impedes the rapid diffusion of Li ions in the SEI, which leads to localized Li ion oversaturation dendritic deposition and hinders the practical applications of LMBs at high-current regions (>3 C). To address this issue, a fluorophosphated SEI rich with fast ion-diffusing inorganic grain boundaries (LiF/Li3P) is introduced. By utilizing a sol electrolyte that contains highly dispersed porous LiF nanoparticles modified with phosphorus-containing functional groups, a fluorophosphated SEI is constructed and the presence of electrochemically active Li within these fast ion-diffusing grain boundaries (GBs-Li) that are non-nucleated is demonstrated, ensuring the stability of the Li || NCM811 cell for over 1000 cycles at fast-charging rates of 5 C (11 mA cm-2). Additionally, a practical, long cycling, and intrinsically safe LMB pouch cell with high energy density (400 Wh kg-1) is fabricated. The work reveals how SEI components and structure design can enable fast-charging LMBs.
RESUMO
Regulating the structure and composition of the lithium-ion (Li+) solvation shell is crucial to the performance of lithium metal batteries. The introduction of fluorine anions (F-) into the electrolyte significantly enhances the cycle efficiency and the interfacial stability of lithium metal anodes. However, the effect of dissolved F- on the solvation shell is rarely touched in the literature. Herein, we investigate the evolution processing of the fluorine-containing solvation structure to explore the underlying mechanisms via first-principles calculations. The additive F- is found to invade the first solvation shell and strongly coordinate with Li+, liberating the bis(trifluoromethanesulfonyl) imide anion (TFSI-) from the Li+ local environment, which enhances the Li+ diffusivity by altering the transport mode. Moreover, the fluorine-containing Li+ solvation shell exhibits a higher lowest unoccupied molecular orbital energy level than that of the solvation sheath without F- additives, suggesting the reduction stability of the electrolyte. Furthermore, the Gibbs free energy calculations for Li+ desolvation reveal that the energy barrier of the Li+ desolvation process will be reduced because of the presence of F-. Our work provides new insights into the mechanisms of electrolyte fluorinated strategies and leads to the rational design of high-performance lithium metal batteries.
RESUMO
The lithium metal anode (LMA) is regarded as one of the most promising candidates for high-energy Li-ion batteries. However, the naturally formed solid electrolyte interface (SEI) is unsatisfied, which would cause continuous dendrite growth and thus prevent the practical application of the LMA. Herein, a stable electrolytic carbon-based hybrid (ECH) artificial SEI is constructed on the LMA via the in-situ electrodeposition of an electrolyte sovlent at ultrahigh voltage. This nanostructured carbon strengthened SEI exhibits much improved ionic conductivity and mechanical strength, which enables uniform Li+ diffusion, stabilizes the interface between the electrolyte and lithium metal, and inhibits Li dendrite breeding and Li pulverization. With the protection of this ECH layer, the symmetrical cells show stable long-term cycling performance over 500 h with an ultrahigh plating capacity of 5 mAh cm-2 at the current density of 5 mA cm-2. A full cell assembled with a Li[Ni0.8Co0.1Mn0.1]O2 or LiFePO4 cathode exhibits a long-term cycling life and excellent capacity retention.
RESUMO
Electrolyte engineering via fluorinated additives is promising to improve cycling stability and safety of high-energy Li-metal batteries. Here, an electrolyte is reported in a porous lithium fluoride (LiF) strategy to enable efficient carbonate electrolyte engineering for stable and safe Li-metal batteries. Unlike traditionally engineered electrolytes, the prepared electrolyte in the porous LiF nanobox exhibits nonflammability and high electrochemical performance owing to strong interactions between the electrolyte solvent molecules and numerous exposed active LiF (111) crystal planes. Via cryogenic transmission electron microscopy and X-ray photoelectron spectroscopy depth analysis, it is revealed that the electrolyte in active porous LiF nanobox involves the formation of a high-fluorine-content (>30%) solid electrolyte interphase layer, which enables very stable Li-metal anode cycling over one thousand cycles under high current density (4 mA cm-2 ). More importantly, employing the porous LiF nanobox engineered electrolyte, a Li || LiNi0.8 Co0.1 Mn0.1 O2 pouch cell is achieved with a specific energy of 380 Wh kg-1 for stable cycling over 80 cycles, representing the excellent performance of the Li-metal pouch cell using practical carbonate electrolyte. This study provides a new electrolyte engineering strategy for stable and safe Li-metal batteries.
RESUMO
AIM: To obtain the baseline data on presenting visual acuity (PVA) and evaluate the prevalence and associated factors for visual impairment based on PVA in 9070 Chinese college students. METHODS: The freshmen at a university in southern China, including 6527 undergraduate students and 2543 graduate students, were investigated for some socio-demographic characteristics and underwent routine medical examination, including measuring PVA, height, and weight. Visual impairment was defined according to the new World Health Organization criteria for blindness and visual impairment. RESULTS: In 9070 college students, the mean PVA in the better eye was 0.094±0.163 logMAR. The prevalence of visual impairment based on PVA was 2.7%. Only 38.3% college students had normal visual acuity [PVA equal to 0 logMAR (20/20) in both eyes]. There were 69.8% of students wearing spectacles. Logistic regression showed that home region (non-Guangdong provinces, P<0.0001, OR=1.70) was risk factor for visual impairment while BMI (P=0.001, OR=0.92) was protective factor from visual impairment. Ethnicity (Han Chinese, P<0.0001, OR=3.17) was risk factor for wearing spectacles while age (P=0.01, OR=0.90) was protective factor from wearing spectacles. CONCLUSION: This study provides the baseline data on PVA and the prevalence of visual impairment in Chinese college students. Our analyses reveal that BMI and home region are associated factors for visual impairment based on PVA, while age and ethnicity are associated factors for wearing spectacles.
RESUMO
The application of solid polymer electrolytes (SPEs) is still inherently limited by the unstable lithium (Li)/electrolyte interface, despite the advantages of security, flexibility, and workability of SPEs. Herein, the Li/electrolyte interface is modified by introducing Li2 S additive to harvest stable all-solid-state lithium metal batteries (LMBs). Cryo-transmission electron microscopy (cryo-TEM) results demonstrate a mosaic interface between poly(ethylene oxide) (PEO) electrolytes and Li metal anodes, in which abundant crystalline grains of Li, Li2 O, LiOH, and Li2 CO3 are randomly distributed. Besides, cryo-TEM visualization, combined with molecular dynamics simulations, reveals that the introduction of Li2 S accelerates the decomposition of N(CF3 SO2 )2 - and consequently promotes the formation of abundant LiF nanocrystals in the Li/PEO interface. The generated LiF is further verified to inhibit the breakage of CO bonds in the polymer chains and prevents the continuous interface reaction between Li and PEO. Therefore, the all-solid-state LMBs with the LiF-enriched interface exhibit improved cycling capability and stability in a cell configuration with an ultralong lifespan over 1800 h. This work is believed to open up a new avenue for rational design of high-performance all-solid-state LMBs.
RESUMO
Metallic lithium anodes are highly promising for revolutionizing current rechargeable batteries because of their ultrahigh energy density. However, the application of lithium metal batteries is considerably impeded by lithium dendrite growth. Here, a biomacromolecule matrix obtained from the natural membrane of eggshell is introduced to control lithium growth and the mechanism is motivated by how living organisms regulate the orientation of inorganic crystals in biomineralization. Specifically, cryo-electron microscopy is utilized to probe the structure of lithium at the atomic level. The dendrites growing along the preferred < 111 > crystallographic orientation are greatly suppressed in the presence of the biomacromolecule. Furthermore, the naturally soluble chemical species in the biomacromolecules can participate in the formation of solid electrolyte interphase upon cycling, thus effectively homogenizing the lithium deposition. The lithium anodes employing bioinspired design exhibit enhanced cycling capability. This work sheds light on identifying substantial challenges in lithium anodes for developing advanced batteries.
Assuntos
Fontes de Energia Elétrica , Lítio , Animais , Biomineralização , Engenharia Química , Microscopia Crioeletrônica , Cristalização , Casca de Ovo/química , Técnicas Eletroquímicas , Eletrodos , Lítio/química , Substâncias Macromoleculares/química , Trifluoretanol/químicaRESUMO
Electrode materials that act through the electrochemical conversion mechanism, such as metal selenides, have been considered as promising anode candidates for lithium-ion batteries (LIBs), although their fast capacity attenuation and inadequate electrical conductivity are impeding their practical application. In this work, these issues are addressed through the efficient fabrication of MnSe nanoparticles inside porous carbon hierarchical architectures for evaluation as anode materials for LIBs. Density functional theory simulations indicate that there is a completely irreversible phase transformation during the initial cycle, and the high structural reversibility of ß-MnSe provides a low energy barrier for the diffusion of lithium ions. Electron localization function calculations demonstrate that the phase transformation leads to high charge transfer kinetics and a favorable lithium ion diffusion coefficient. Benefitting from the phase transformation and unique structural engineering, the MnSe/C chestnut-like structures with boosted conductivity deliver enhanced lithium storage performance (885 mA h g-1 at a current density of 0.2 A g-1 after 200 cycles), superior cycling stability (a capacity of 880 mA h g-1 at 1 A g-1 after 1000 cycles), and outstanding rate performance (416 mA h g-1 at 2 A g-1).
RESUMO
The fasciculate zone of phase pure rutile was fabricated under sunlight irradiation at room temperature, using titanium tetrachloride as a sole precursor. The crystal phase, morphology and microstructure, and optical absorption behavior of the samples were characterized by X-ray Diffraction, High-Resolution Transmission Electron Microscope (HRTEM) and UV-vis Diffuse Reflectance Spectra (DRS), respectively. XRD results show that the crystal phase of the sample is composed of rutile only, and a lattice distortion displays in the crystallite of the sample. HRTEM results show that the morphology of rutile particle is fasciculate zone constituted of nanoparticles with a diameter of 4-7 nm, and these particles grow one by one and step by step. The pattern of the selected area electron diffraction of the sample is Kikuchi type, which can be attributed to the predominant orientation growth of rutile nanoparticles along [001] induced by sunlight irradiation. DRS results show that the absorption threshold of the sample is 415 nm, corresponding to the band gap energy of 2.99 eV, which is lower than the band gap energy of rutile, 3.03 eV. Blood compatibility measurement shows that the sample has no remarkable effect on hemolytic and coagulation activity. The percent hemolysis of red blood cells is less than 5% even treated with a big dosage of the fasciculate rutile and under UV irradiation, and there are no obvious changes of plasma recalcification time after the rutile treatment. Thus, the novel structure of rutile fasciculate has low potential toxicity for blood and is hemocompatibility safe.