Multiphase Drug Distribution and Exchange in Oil-in-Water Nanoemulsion Revealed by High-Resolution 19F qNMR.

An oil-in-water (o/w) nanoemulsion (NE), composed of oil globules, stabilized by a surfactant, and dispersed in an aqueous phase, is increasingly developed in complex drug formulation. Kinetically stable NEs are used to formulate hydrophobic drugs and typically provide higher dosage strengths and better content uniformity. However, little is known accurately about drug distribution in its multiphase solution, especially for the possible drug presence in the surfactant (s) phase, the interface layer between the dispersed oil (o) and the continuous water (w) phases. Here, high-resolution 19F quantitative NMR spectroscopy was applied directly and noninvasively on an o/w NE drug product containing difluprednate (DFPN). The well-resolved 19F peaks of DFPN depended on the shielding molecules in each phase, which revealed mass-balanced DFPN distribution in multiple phases of (w), (s), and (o) of NE globules at a quantity of 1.8 ± 0.1, 35 ± 2, and 59 ± 3% per labeled content, respectively. Furthermore, the dilution-dependent 19F peak line broadening and shift suggested a millisecond dynamic exchange between the NE and the less-noticed smaller but thermodynamically stable microemulsion (ME) globules in NE solution. The high-resolution NMR result revealed that the drug availability could be quickly achieved using an o/w NE formulation because of the drug multiphase distribution and the ME-assisted fast drug exchange among globules.

Influences of simulated gastrointestinal environment on physicochemical properties of gold nanoparticles and their implications on intestinal epithelial permeability.

Gold nanoparticles (Au NPs) hold great promise in food, industrial and biomedical applications due to their unique physicochemical properties. However, influences of the gastrointestinal tract (GIT), a likely route for Au NPs administration, on the physicochemical properties of Au NPs has been rarely evaluated. Here, we investigated the influence of GIT fluids on the physicochemical properties of Au NPs (5, 50, and 100 nm) and their implications on intestinal epithelial permeability in vitro. Au NPs aggregated in fasted gastric fluids and generated hydroxyl radicals in the presence of H2O2. Cell studies showed that GIT fluids incubation of Au NPs affected the cellular uptake of Au NPs but did not induce cytotoxicity or disturb the intestinal epithelial permeability.

Dissecting the biochemical architecture and morphological release pathways of the human platelet extracellular vesiculome.

Platelet extracellular vesicles (PEVs) have emerged as potential mediators in intercellular communication. PEVs exhibit several activities with pathophysiological importance and may serve as diagnostic biomarkers. Here, imaging and analytical techniques were employed to unveil morphological pathways of the release, structure, composition, and surface properties of PEVs derived from human platelets (PLTs) activated with the thrombin receptor activating peptide (TRAP). Based on extensive electron microscopy analysis, we propose four morphological pathways for PEVs release from TRAP-activated PLTs: (1) plasma membrane budding, (2) extrusion of multivesicular α-granules and cytoplasmic vacuoles, (3) plasma membrane blistering and (4) "pearling" of PLT pseudopodia. The PLT extracellular vesiculome encompasses ectosomes, exosomes, free mitochondria, mitochondria-containing vesicles, "podiasomes" and PLT "ghosts". Interestingly, a flow cytometry showed a population of TOM20+LC3+ PEVs, likely products of platelet mitophagy. We found that lipidomic and proteomic profiles were different between the small PEV (S-PEVs; mean diameter 103 nm) and the large vesicle (L-PEVs; mean diameter 350 nm) fractions separated by differential centrifugation. In addition, the majority of PEVs released by activated PLTs was composed of S-PEVs which have markedly higher thrombin generation activity per unit of PEV surface area compared to L-PEVs, and contribute approximately 60% of the PLT vesiculome procoagulant potency.

Exploring the activities of ruthenium nanomaterials as reactive oxygen species scavengers.

Research on noble metal nanoparticles (NPs) able to scavenge reactive oxygen species (ROS) has undergone a tremendous growth recently. However, the interactions between ruthenium nanoparticles (Ru NPs) and ROS have never been systematically explored thus far. This research focused on the decomposition of hydrogen peroxide (H2O2), scavenging of hydroxyl radicals (•OH), superoxide radical (O2•-), singlet oxygen (1O2), 2,2'-azino-bis(3-ethylbenzenothiazoline- 6-sulfonic acid ion (ABTS•+), and 1,1-diphenyl-2-picrylhydrazyl radical (•DPPH) in the presence of commercial Ru NPs using the electron spin resonance technique. In vitro cell studies demonstrated that Ru NPs have excellent biocompatibility and exert a cytoprotective effect against oxidative stress. These findings may spark fresh enthusiasm for the applications of Ru NPs under relevant physiologically conditions.

Controlled initial surge despite high drug fraction and high solubility.

Potential connections between release profiles and solvent evaporation rates alongside polymer chemistry were elucidated for the release of tetracycline hydrochloride from two different poly (d, l-lactide-co-glycolide) (PLGA) film matrices containing high drug fractions (50%, 30%, and 15%), and prepared at two distinct solvent evaporation rates. At highest tetracycline concentrations (50%), (i) the early release rates were ≤0.5 µg/min in all cases; (ii) release was linear from systems fabricated with lower lactic content and slower solvent evaporation rate and bimodal from systems fabricated with higher lactic content and faster evaporation rate; (iii) surface fractions covered by the drug were similar at both evaporation rates for 85:15 PLGA but very different for 50:50 PLGA, leading to unexpectedly reduced early release from 50:50 PLGA than from 85:15 PLGA when both the matrices were fabricated using a slower evaporation rate. These features remained unaffected in case of low drug concentration. Results suggested that during the formation of the drug-polymer microstructure, the combined effect of polymer chemistry and solvent evaporation rate sets apart the surface characteristics and the initial release profiles of systems containing high drug fraction, and an appropriate combination of these parameters may be utilized to control the early stage of drug release.

Contribution of ionic silver to genotoxic potential of nanosilver in human liver HepG2 and colon Caco2 cells evaluated by the cytokinesis-block micronucleus assay.

Extensive human exposure to food- and cosmetics-related consumer products containing nanosilver is of public concern because of the lack of information about their safety. Genotoxicity is an important endpoint for the safety and health hazard assessment of regulated products including nanomaterials. The in vitro cytokinesis-block micronucleus (CBMN) assay is a very useful test for predictive genotoxicity testing. Recently, we have reported the genotoxicity of 20 nm nanosilver in human liver HepG2 and colon Caco2 cells evaluated using the CBMN assay. The objective of our present study was three-fold: (i) to evaluate if HepG2 and Caco2 cells are valuable in vitro models for rapid genotoxicity screening of nanosilver; (ii) to test the hypothesis that the nanoparticle size and cell types are critical determinants of its genotoxicity; and (iii) to determine if ionic silver contributes to the nanosilver genotoxicity. With these objectives in mind, we evaluated the genotoxic potential of 50 nm nanosilver of the same shape, composition, surface charge, obtained from the same commercial source, under the same experimental conditions and the same genotoxic CBMN endpoint used for the previously tested 20 nm silver. The ionic silver (silver acetate) was also evaluated under the same conditions. Results of our study show that up to the concentrations tested in these cell types, the smaller (20 nm) nanosilver induces micronucleus formation in both the cell types but the larger (50 nm) nanosilver and the ionic silver provide a much weaker response compared with controls under the same conditions.

Flow cytometric evaluation of the contribution of ionic silver to genotoxic potential of nanosilver in human liver HepG2 and colon Caco2 cells.

Exposure to nanosilver found in food- and cosmetics-related consumer products is of public concern because of the lack of information about its safety. In this study, two widely used in vitro cell culture models, human liver HepG2 and colon Caco2 cells, and the flow cytometric micronucleus (FCMN) assay were evaluated as tools for rapid predictive screening of the potential genotoxicity of nanosilver. Recently, we reported the genotoxicity of 20 nm nanosilver using these systems. In the current study presented here, we tested the hypothesis that the nanoparticle size and cell types were critical determinants of its genotoxicity. To test this hypothesis, we used the FCMN assay to evaluate the genotoxic potential of 50 nm nanosilver of the same shape, composition, surface charge and obtained from the same commercial source using the same experimental conditions and in vitro models (HepG2 and Caco2) as previously tested for the 20 nm silver. Results of our study show that up to the concentrations tested in these cultured cell test systems, the smaller (20 nm) nanoparticle is genotoxic to both the cell types by inducing micronucleus (MN). However, the larger (50 nm) nanosilver induces MN only in HepG2 cells, but not in Caco2 cells. Also in this study, we evaluated the contribution of ionic silver to the genotoxic potential of nanosilver using silver acetate as the representative ionic silver. The MN frequencies in HepG2 and Caco2 cells exposed to the ionic silver in the concentration range tested are not statistically significant from the control values except at the top concentrations for both the cell types. Therefore, our results indicate that the ionic silver may not contribute to the MN-forming ability of nanosilver in HepG2 and Caco2 cells. Also our results suggest that the HepG2 and Caco2 cell cultures and the FCMN assay are useful tools for rapid predictive screening of a genotoxic potential of food- and cosmetics-related chemicals including nanosilver.

Biological evaluation of ultrananocrystalline and nanocrystalline diamond coatings.

Nanostructured biomaterials have been investigated for achieving desirable tissue-material interactions in medical implants. Ultrananocrystalline diamond (UNCD) and nanocrystalline diamond (NCD) coatings are the two most studied classes of synthetic diamond coatings; these materials are grown using chemical vapor deposition and are classified based on their nanostructure, grain size, and sp3 content. UNCD and NCD are mechanically robust, chemically inert, biocompatible, and wear resistant, making them ideal implant coatings. UNCD and NCD have been recently investigated for ophthalmic, cardiovascular, dental, and orthopaedic device applications. The aim of this study was (a) to evaluate the in vitro biocompatibility of UNCD and NCD coatings and (b) to determine if variations in surface topography and sp3 content affect cellular response. Diamond coatings with various nanoscale topographies (grain sizes 5-400 nm) were deposited on silicon substrates using microwave plasma chemical vapor deposition. Scanning electron microscopy and atomic force microscopy revealed uniform coatings with different scales of surface topography; Raman spectroscopy confirmed the presence of carbon bonding typical of diamond coatings. Cell viability, proliferation, and morphology responses of human bone marrow-derived mesenchymal stem cells (hBMSCs) to UNCD and NCD surfaces were evaluated. The hBMSCs on UNCD and NCD coatings exhibited similar cell viability, proliferation, and morphology as those on the control material, tissue culture polystyrene. No significant differences in cellular response were observed on UNCD and NCD coatings with different nanoscale topographies. Our data shows that both UNCD and NCD coatings demonstrate in vitro biocompatibility irrespective of surface topography.

Toxicogenomic responses of human liver HepG2 cells to silver nanoparticles.

The increased use of silver nanoparticles (AgNPs) in foods and cosmetics has raised public safety concerns. However, only limited knowledge exists on the effect of AgNPs on the cellular transcriptome. This study evaluated global gene expression profiles of human liver HepG2 cells exposed to 20 and 50 nm AgNPs for 4 and 24 h at 2.5 µg ml(-1) . Exposure to 20 nm AgNPs resulted in 811 altered genes after 4 h, but much less after 24 h. Exposure to 50 nm AgNPs showed minimal altered genes at both exposure times. The HepG2 cells responded to the toxic insult of AgNPs by transiently upregulating stress response genes such as metallothioneins and heat shock proteins. Functional analysis of the altered genes showed more than 20 major biological processes were affected, of which metabolism, development, cell differentiation and cell death were the most dominant categories. Several cellular pathways were also impacted by AgNP exposure, including the p53 signaling pathway and the NRF2-mediated oxidative stress response pathway, which may lead to increased oxidative stress and DNA damage in the cell and potentially result in genotoxicity and carcinogenicity. Together, these results indicate that HepG2 cells underwent a multitude of cellular processes in response to the toxic insult of AgNP exposure, and suggest that toxicogenomic characterization of human HepG2 cells could serve as an alternative model for assessing toxicities of NPs.

Controlled formation and characterization of dithiothreitol-conjugated gold nanoparticle clusters.

We report a systematic study of the controlled formation of discrete-sized gold nanoparticle clusters (GNCs) by interaction with the reducing agent dithiothreitol (DTT). Asymmetric-flow field flow fractionation and electrospray differential mobility analysis were employed complementarily to determine the particle size distributions of DTT-conjugated GNCs (DTT-GNCs). Transmission electron microscopy was used to provide visualization of DTT-GNCs at different states of aggregation. Surface packing density of DTT and the corresponding molecular conformation on the Au surface were characterized by inductively coupled plasma mass spectrometry and X-ray photoelectron spectroscopy. Results show that DTT increases the aggregation rate of gold nanoparticles (AuNPs) up to ≈100 times. A mixed conformation (i.e., combining vertically aligned, horizontally aligned, and cross-linking modes) exists for DTT on the Au surface for all conditions examined. The primary size of AuNPs, concentration of DTT, and the starting concentration of AuNPs influence the degree of aggregation for DTT-GNCs, indicating that the collision frequency, energy barrier, and surface density of DTT are the key factors that control the aggregation rate. DTT-GNCs exhibit improved structural stability compared to the citrate-stabilized GNCs (i.e., unconjugated) following reaction with thiolated polyethylene glycol (SH-PEG), indicating that cross-linking and surface protection by DTT suppresses disaggregation normally induced by the steric repulsion of SH-PEG. This work describes a prototype methodology to form ligand-conjugated GNCs with high-quality and well-controlled material properties.

Comparative cytotoxicity of nanosilver in human liver HepG2 and colon Caco2 cells in culture.

The use of silver nanoparticles in food, food contact materials, dietary supplements and cosmetics has increased significantly owing to their antibacterial and antifungal properties. As a consequence, the need for validated rapid screening methods to assess their toxicity is necessary to ensure consumer safety. This study evaluated two widely used in vitro cell culture models, human liver HepG2 cells and human colon Caco2 cells, as tools for assessing the potential cytotoxicity of food- and cosmetic-related nanoparticles. The two cell culture models were utilized to compare the potential cytotoxicity of 20-nm silver. The average size of the silver nanoparticle determined by our transmission electron microscopy (TEM) analysis was 20.4 nm. The dynamic light scattering (DLS) analysis showed no large agglomeration of the silver nanoparticles. The concentration of the 20-nm silver solution determined by our inductively coupled plasma-mass spectrometry (ICP-MS) analysis was 0.962 mg ml(-1) . Our ICP-MS and TEM analysis demonstrated the uptake of 20-nm silver by both HepG2 and Caco2 cells. Cytotoxicity, determined by the Alamar Blue reduction assay, was evaluated in the nanosilver concentration range of 0.1 to 20 µg ml(-1) . Significant concentration-dependent cytotoxicity of the nanosilver in HepG2 cells was observed in the concentration range of 1 to 20 µg ml(-1) and at a higher concentration range of 10 to 20 µg ml(-1) in Caco2 cells compared with the vehicle control. A concentration-dependent decrease in dsDNA content was observed in both cell types exposed to nanosilver but not controls, suggesting an increase in DNA damage. The DNA damage was observed in the concentration range of 1 to 20 µg ml(-1) . Nanosilver-exposed HepG2 and Caco2 cells showed no cellular oxidative stress, determined by the dichlorofluorescein assay, compared with the vehicle control in the concentration range used in this study. A concentration-dependent decrease in mitochondria membrane potential in both nanosilver exposed cell types suggested increased mitochondria injury compared with the vehicle control. The mitochondrial injury in HepG2 cells was significant in the concentration range of 1 to 20 µg ml(-1) , but in Caco2 cells it was significant at a higher concentration range of 10 to 20 µg ml(-1) . These results indicated that HepG2 cells were more sensitive to nanosilver exposure than Caco2 cells. It is generally believed that cellular oxidative stress induces cytotoxicity of nanoparticles. However, in this study we did not detect any nanosilver-induced oxidative stress in either cell type at the concentration range used in this study. Our results suggest that cellular oxidative stress did not play a major role in the observed cytotoxicity of nanosilver in HepG2 and Caco2 cells and that a different mechanism of nanosilver-induced mitochondrial injury leads to the cytotoxicity. The HepG2 and Caco2 cells used this study appear to be targets for silver nanoparticles. The results of this study suggest that the differences in the mechanisms of toxicity induced by nanosilver may be largely as a consequence of the type of cells used. This differential rather than universal response of different cell types exposed to nanoparticles may play an important role in the mechanism of their toxicity. In summary, the results of this study indicate that the widely used in vitro models, HepG2 and Caco2 cells in culture, are excellent systems for screening cytotoxicity of silver nanoparticles. These long established cell culture models and simple assays used in this study can provide useful toxicity and mechanistic information that can help to better inform safety assessments of food- and cosmetic-related silver nanoparticles.

Comparative genotoxicity of nanosilver in human liver HepG2 and colon Caco2 cells evaluated by fluorescent microscopy of cytochalasin B-blocked micronucleus formation.

As a consequence of the increased use of silver nanoparticles in food, food contact materials, dietary supplements and cosmetics to prevent fungal and bacterial growth, there is a need for validated rapid screening methods to assess the safety of nanoparticle exposure. This study evaluated two widely used in vitro cell culture models, human liver HepG2 cells and human colon Caco2 cells, as tools for assessing the potential genotoxicity of 20-nm nanosilver. The average silver nanoparticle size as determined by transmission electron microscopy (TEM) was 20.4 nm. Dynamic light scattering (DLS) analysis showed no large agglomeration of the silver nanoparticles. The silver concentration in a 20-nm nanosilver solution determined by the inductively coupled plasma-mass spectrometry (ICP-MS) analysis was 0.962 mg ml(-1) . Analysis by ICP-MS and TEM demonstrated the uptake of 20-nm silver by both HepG2 and Caco2 cells. Genotoxicity was determined by the cytochalasin B-blocked micronucleus assay with acridine orange staining and fluorescence microscopy. Concentration- and time-dependent increases in the frequency of binucleated cells with micronuclei induced by the nanosilver was observed in the concentration range of 0.5 to 15 µg ml(-1) in both HepG2 and Caco2 cells compared with the control. Our results indicated that HepG2 cells were more sensitive than Caco2 cells in terms of micronuclei formation induced by nanosilver exposure. In summary, the results of this study indicate that the widely used in vitro models, HepG2 and Caco2 cells in culture, represent potential screening models for prediction of genotoxicity of silver nanoparticles by in vitro micronucleus assay.

Particle size distributions by transmission electron microscopy: an interlaboratory comparison case study.

This paper reports an interlaboratory comparison that evaluated a protocol for measuring and analysing the particle size distribution of discrete, metallic, spheroidal nanoparticles using transmission electron microscopy (TEM). The study was focused on automated image capture and automated particle analysis. NIST RM8012 gold nanoparticles (30 nm nominal diameter) were measured for area-equivalent diameter distributions by eight laboratories. Statistical analysis was used to (1) assess the data quality without using size distribution reference models, (2) determine reference model parameters for different size distribution reference models and non-linear regression fitting methods and (3) assess the measurement uncertainty of a size distribution parameter by using its coefficient of variation. The interlaboratory area-equivalent diameter mean, 27.6 nm ± 2.4 nm (computed based on a normal distribution), was quite similar to the area-equivalent diameter, 27.6 nm, assigned to NIST RM8012. The lognormal reference model was the preferred choice for these particle size distributions as, for all laboratories, its parameters had lower relative standard errors (RSEs) than the other size distribution reference models tested (normal, Weibull and Rosin-Rammler-Bennett). The RSEs for the fitted standard deviations were two orders of magnitude higher than those for the fitted means, suggesting that most of the parameter estimate errors were associated with estimating the breadth of the distributions. The coefficients of variation for the interlaboratory statistics also confirmed the lognormal reference model as the preferred choice. From quasi-linear plots, the typical range for good fits between the model and cumulative number-based distributions was 1.9 fitted standard deviations less than the mean to 2.3 fitted standard deviations above the mean. Automated image capture, automated particle analysis and statistical evaluation of the data and fitting coefficients provide a framework for assessing nanoparticle size distributions using TEM for image acquisition.

Stability of Abuse-deterrent properties of PEO-based Abuse-deterrent formulation.

Abuse of opioid drug products is a national health crisis in the US. To deter abuse, a number of drug products with abuse-deterrent (AD) properties have been approved by the US Food and Drug Administration (FDA). For abuse deterrence, it is critical to maintain the AD properties during the product shelf life. However, no information on the stability of AD properties during product shelf life is publicly available. In this study, stability of AD properties of surrogate AD formulation (ADF) of opioid active pharmaceutical ingredients (APIs) were studied. Surrogate extended release (ER) AD tablets were prepared by direct compression using Diltiazem HCl (model drug), polyethylene oxide (PEO WSR 301) polymer and magnesium stearate followed by curing at 70 °C for 30 mins. The stability studies were conducted at 25 °C/60 % RH and 40 °C/75 % RH storage conditions for 12 months (M) and 6 months (M), respectively. In vitro characterization and evaluation of AD properties of tablets were performed. As anticipated, the curing process increased the crushing strength of the tablets. However, the tablets could still be manipulated and compromised leading to an enhancement in the amount of drug extracted in solvents (e.g., water, alcohol), regardless of extraction temperature as well as tablet storage condition and time. Furthermore, the granule particle size as well as viscosity in water of manipulated samples were found to be lower for tablets stored at 25 °C/60 % RH or 40 °C/75 % RH for 12 M or 3 M/6M, respectively. The changes in AD properties eased the syringeability of hydrated samples and ultimately led to the withdrawal of higher amounts of drug into the syringe, thereby, impacting the abuse deterrence potential of the formulation by an IV route. These data demonstrated that the stability of AD properties (i.e., granule particle size, viscosity and syringeability-injectability) of PEO-based tablets was dependent on the storage condition. In conclusion, the design of AD formulation and setting of product quality profile should take into consideration the stability of AD properties during the product shelf life.

Characterizing how size distribution and concentration affect echogenicity of ultrasound contrast agents.

We investigated the effects of UCA gas bubble size distribution and concentration on the generated ultrasound echogenicity signal. Gas bubble size characterization using Coulter Counter and cryogenic-SEM revealed the hollow structure and rare presence of microbubbles >10 µm in a commercial UCA product, Lumason™. Volume-weighed size and concentration were observed to be more sensitive to changes in UCA bubble stability than number-weighted size and concentration. Size distribution measurements showed that the force (e.g., shaking/agitation energy) used to redisperse the sample did not affect the size distribution, concentration, or echogenicity of the UCA sample. The ultrasound backscattering coefficient (BSC) of size fractionated and serial diluted microbubbles showed that the echogenicity signal correlates most with UCA bubble concentration, especially volume-weighted concentration. Findings from this study may be used to support demonstrating the equivalence of a generic UCA product to the reference listed drug.

Characterization of exparel bupivacaine multivesicular liposomes.

Exparel is a bupivacaine multivesicular liposomes (MVLs) formulation developed based on the DepoFoam technology. The complex composition and the unique structure of MVLs pose challenges to the development and assessment of generic versions. In the present work, we developed a panel of analytical methods to characterize Exparel with respect to particle size, drug and lipid content, residual solvents, and pH. In addition, an accelerated in vitro drug release assay was developed using a rotator-facilitated, sample-and-separate experimental setup. The proposed method could achieve over 80% of bupivacaine release within 24 h, which could potentially be used for formulation comparison and quality control purposes. The batch-to-batch variability of Exparel was examined by the established analytical methods. Four different batches of Exparel showed good batch-to-batch consistency in drug content, particle size, pH, and in vitro drug release kinetics. However, slight variation in lipid contents were observed.

Examining the role of nickel and NiTi nanoparticles promoting inflammation and angiogenesis.

Nickel titanium (NiTi, or Nitinol) alloy is used in several biomedical applications, including cardiac, peripheral vascular, and fallopian tube stents. There are significant biocompatibility issues of metallic implants to nickel ions and nano-/micro-sized alloy particles. Our laboratories have recently shown that microscale CoCr wear particles from metal-on-metal hips crosslink with the innate immune signaling Toll-like receptor 4 (TLR4), prompting downstream signaling that results in interleukin (IL)-1ß and IL-8 gene expression. In vivo, NiTi alloy can also generate wear particles on the nanoscale (NP) that have thus far not been studied for their potential to induce inflammation and angiogenesis that can, in turn, contribute to implant (e.g. stent) failure. Earlier studies by others demonstrated that nickel could induce contact hypersensitivity by crosslinking the human, but not the mouse, TLR4. In the present work, it is demonstrated that NiCl2 ions and NiTi nanoparticles induce pro-inflammatory and pro-angiogenic cytokine/chemokine expression in human endothelial and monocyte cell lines in vitro. These observations prompt concerns about potential mechanisms for stent failure. The data here showed a direct correlation between intracellular uptake of Ni2+ and generation of reactive oxygen species. To determine a role for nickel and NiTi nanoparticles in inducing angiogenesis in vivo, 1-cm silicone angioreactors were implanted subcutaneously into athymic (T-cell-deficient) nude mice. The angioreactors contained Matrigel (a gelatinous protein mixture that resembles extracellular matrix) in addition to one of the following: PBS (negative control), VEGF/FGF-2 (positive control), NiCl2, or NiTi NP. The implantation of angioreactors represents a potential tool for quantification of angiogenic potentials of medical device-derived particles and ions in vivo. By this approach, NiTi NP were found to be markedly angiogenic, while Ni2+ was less-so. The angioreactors may provide a powerful tool to examine if debris shed from medical devices may promote untoward biological effects.

Chemical Characterization and Non-targeted Analysis of Medical Device Extracts: A Review of Current Approaches, Gaps, and Emerging Practices.

The developers of medical devices evaluate the biocompatibility of their device prior to FDA's review and subsequent introduction to the market. Chemical characterization, described in ISO 10993-18:2020, can generate information for toxicological risk assessment and is an alternative approach for addressing some biocompatibility end points (e.g., systemic toxicity, genotoxicity, carcinogenicity, reproductive/developmental toxicity) that can reduce the time and cost of testing and the need for animal testing. Additionally, chemical characterization can be used to determine whether modifications to the materials and manufacturing processes alter the chemistry of a patient-contacting device to an extent that could impact device safety. Extractables testing is one approach to chemical characterization that employs combinations of non-targeted analysis, non-targeted screening, and/or targeted analysis to establish the identities and quantities of the various chemical constituents that can be released from a device. Due to the difficulty in obtaining a priori information on all the constituents in finished devices, information generation strategies in the form of analytical chemistry testing are often used. Identified and quantified extractables are then assessed using toxicological risk assessment approaches to determine if reported quantities are sufficiently low to overcome the need for further chemical analysis, biological evaluation of select end points, or risk control. For extractables studies to be useful as a screening tool, comprehensive and reliable non-targeted methods are needed. Although non-targeted methods have been adopted by many laboratories, they are laboratory-specific and require expensive analytical instruments and advanced technical expertise to perform. In this Perspective, we describe the elements of extractables studies and provide an overview of the current practices, identified gaps, and emerging practices that may be adopted on a wider scale in the future. This Perspective is outlined according to the steps of an extractables study: information gathering, extraction, extract sample processing, system selection, qualification, quantification, and identification.

Characterization of Complex Drug Formulations Using Cryogenic Scanning Electron Microscopy (Cryo-SEM).

The physicochemical properties of complex drug formulations, including liposomes, suspensions, and emulsions, are important for understanding drug release mechanisms, quality control, and regulatory assessment. It is ideal to characterize these complex drug formulations in their native hydrated state. This article describes the characterization of complex drug formulations in a frozen-hydrated state using cryogenic scanning electron microscopy (cryo-SEM). In comparison to other techniques, such as optical microscopy or room-temperature scanning electron microscopy, cryo-SEM combines the advantage of studying hydrated samples with high-resolution imaging capability. Detailed information regarding cryo-fixation, cryo-fracture, freeze-etching, sputter-coating, and cryo-SEM imaging is included in this article. A multivesicular liposomal complex drug formulation is used to illustrate the impact of different cryogenic sample preparation conditions. In addition to drug formulations, this approach can also be applied to biological samples (e.g., cells, bacteria) and soft-matter samples (e.g., hydrogels). © Published 2022. This article is a U.S. Government work and is in the public domain in the USA. Basic Protocol 1: Cryo-fixation to preserve the native structure of samples using planchettes Alternate Protocol: Cryo-fixation to preserve the native structure of biological samples on sapphire disks Basic Protocol 2: Sample preparation for cross-sectional cryo-SEM imaging Basic Protocol 3: Cryo-SEM imaging and microanalysis.

Comparative Characterization of Different Molecular Formats of Bispecific Antibodies Targeting EGFR and PD-L1.

We generated two IgG1-like bispecific antibodies (BsAbs) with different molecular formats, symmetrical DVD-Ig and asymmetrical knob-in-hole (KIH), targeting the same antigens, EGFR and PD-L1 (designated as anti-EGFR/PD-L1). We performed the physiochemical and biological characterization of these two formats of anti-EGFR/PD-L1 BsAbs and compared some key quality attributes and biological activities of these two formats of BsAbs. Physiochemical binding characterization data demonstrated that both formats bound EGFR and PD-L1. However, the binding affinity of the KIH format was weaker than the DVD-Ig format in Biacore binding assays. In contrast, both DVD-Ig and KIH BsAbs had similar ELISA and cell surface binding activities, comparable to mAbs. Triple-negative breast cancer (TNBC) cells and a xenograft model were used to test the potency of BsAbs and other biological activities. Results showed that anti-EGFR/PD-L1 BsAbs exhibited in vitro and in vivo antitumor proliferation activity, but there was a difference in the potencies of the respective BsAb formats (DVD-Ig and KIH) when different cells or assays were used. This study provides evidence that the potency of the BsAbs targeting the same antigens can be affected by the respective molecular features, and selection of appropriate cell lines and assays is critically important for the assay development and potency testing of BsAbs.