Dynamic Color-Switching of Hydrogel Micropillar Array under Ethanol Vapor for Optical Encryption.

Responsive structural colors from artificially engineered micro/nanostructures are critical to the development of anti-counterfeiting, optical encryption, and intelligent display. Herein, the responsive structural color of hydrogel micropillar array is demonstrated under the external stimulus of ethanol vapor. Micropillar arrays with full color are fabricated via femtosecond laser direct writing by controlling the height and diameter of the micropillars according to the FDTD simulation. Color-switching of the micropillar arrays is achieved in <1 s due to the formation of liquid film among micropillars. More importantly, the structural color blueshift of the micropillar arrays is sensitive to the micropillar diameter, instead of the micropillar height. The micropillar array with a diameter of 772 nm takes 400 ms to complete blueshift under ethanol vapor, while that with a diameter of 522 nm blueshifts at 2400 ms. Microscale patterns are realized by employing the size-dependent color-switching of designed micropillar arrays under ethanol vapor. Moreover, Morse code and directional blueshift of structural colors are realized in the micropillar arrays. The advantages of controllable color-switching of the hydrogel micropillar array would be prospective in the areas of optical encryption, dynamic display, and anti-counterfeiting.

Dual-Stimuli Cooperative Responsive Hydrogel Microactuators Via Two-Photon Lithography.

With the development of bionics as well as materials science, intelligent soft actuators have shown promising applications in many fields such as soft robotics, sensing, and remote manipulation. Microfabrication technologies have enabled the reduction of the size of responsive soft actuators to the micron level. However, it is still challenging to construct microscale actuators capable of responding to different external stimuli in complex and diverse conditions. Here, this work demonstrates a dual-stimuli cooperative responsive hydrogel microactuator by asymmetric fabrication via femtosecond laser direct writing. The dual response of the hydrogel microstructure is achieved by employing responsive hydrogel with functional monomer 2-(dimethylamino)ethyl methacrylate. Raman spectra of the hydrogel microstructures suggest that the pH and temperature response of the hydrogel is generated by the changes in tertiary amine groups and hydrogen bonds, respectively. The asymmetric hydrogel microstructures show opposite bending direction when being heated to high temperature or exposed to acid solution, and can independently accomplish the grasp of polystyrene microspheres. Moreover, this work depicts the cooperative response of the hydrogel microactuator to pH and temperature at the same time. The dual-stimuli cooperative responsive hydrogel microactuators will provide a strategy for designing and fabricating controllable microscale actuators with promising applications in microrobotics and microfluidics.

Wetting of Cell Aggregates on Microdisk Topography Structures Achieved by Maskless Optical Projection Lithography.

Cell aggregates as a 3D culture model can effectively mimic the physiological processes such as embryonic development, immune response, and tissue renewal in vivo. Researches show that the topography of biomaterials plays an important role in regulating cell proliferation, adhesion, and differentiation. It is of great significance to understand how cell aggregates respond to surface topography. Herein, microdisk array structures with the optimized size are used to investigate the wetting of cell aggregates. Cell aggregates exhibit complete wetting with distinct wetting velocities on the microdisk array structures of different diameters. The wetting velocity of cell aggregates reaches a maximum of 293 µm h-1 on microdisk structures with a diameter of 2 µm and is a minimum of 247 µm h-1 on microdisk structures of 20 µm diameter, which suggests that the cell-substrates adhesion energy on the latter is smaller. Actin stress fibers, focal adhesions (FAs), and cell morphology are analyzed to reveal the mechanisms of variation of wetting velocity. Furthermore, it is demonstrated that cell aggregates adopt climb and detour wetting modes on small and large-sized microdisk structures, respectively. This work reveals the response of cell aggregates to micro-scale topography, providing guidance for better understanding of tissue infiltration.

Cross-Scale Topography Achieved by MOPL with Positive Photoresist to Regulate the Cell Behavior.

Cross-scale micro-nano structures play an important role in semiconductors, MEMS, chemistry, and cell biology. Positive photoresist is widely used in lithography due to the advantages of high resolution and environmental friendliness. However, cross-scale micro-nano structures of positive photoresist are difficult to flexibly pattern, and the feature resolution is limited by the optical diffraction. Here, cross-scale patterned micro-nano structures are achieved using the positive photoresist based on the femtosecond laser maskless optical projection lithography (MOPL) technique. The dependence between exposure dose and groove width is comprehensively analyzed, and a feature size of 112 nm is obtained at 110 µW. Furthermore, large-area topography considering cell size is efficiently fabricated by the MOPL technique, which enables the regulation of cell behavior. The proposed protocol of achieving cross-scale structures with the exact size by MOPL of positive photoresist would provide new avenues for potential applications in nanoelectronics and tissue engineering.

Micropattern of Silver/Polyaniline Core-Shell Nanocomposite Achieved by Maskless Optical Projection Lithography.

With the development of device miniaturization, a flexible and fast preparation method is in demand for achieving microstructures with desired patterns. We develop a novel photoreduction-polymerization method for preparing conductive metal-polymer patterns. Ag/polyaniline (PANI) nanocomposites have been successfully synthesized by maskless optical projection lithography (MOPL) technology, which is based on multiphoton absorption and the localized surface plasmon resonance (LSPR) effect. The individualized design and synthesis of the nanocomposite patterns at the micro-nano scale are flexibly realized on a variety of substrates. The surface-enhanced Raman scattering (SERS) effect of Rhodamine 6G (R6G) is demonstrated on the microstructure of a square maze-shaped Ag/PANI nanocomposite. The electrical conductivity of the as-prepared nanocomposite is obtained. The preparation protocol proposed in this study opens up new avenues for the fabrication of micro-nano devices such as sensors and detectors.

Consistent pattern printing of the gap structure in femtosecond laser DMD projection lithography.

Maskless lithography technologies have been developed and played an important role in the fabrication of functional micronano devices for microelectronics, biochips and photonics. Optical projection lithography based on digital micromirror device (DMD) is an efficient maskless lithography technology that can rapidly fabricate complex structures. The precise modulation of gap width by DMD maskless optical projection lithography (MOPL) using femtosecond laser becomes important for achieving micronano structures. Herein, we have investigated the relationship between the structure morphology and the light intensity distribution at the image plane by multi-slit diffraction model and Abbe imaging principle, and optimized the gap width more accurately by modulating exposure energy. The aperture diameter of the objective lens has a substantial effect on the pattern consistency. The continuously adjustable structural gap widths of 2144 nm, 2158 nm and 1703 nm corresponding to 6, 12, 24 pixels are obtained by varying the exposure energy in the home-built MOPL system. However, the ideal gap structure cannot be obtained only by adjusting the exposure energy when the gap width is small, such as 1 or 2 pixels. Furthermore, we have proposed an alternative way to achieve fine gap structures through the structural decomposition design and precise control of exposure energy in different regions without changing the MOPL optical system. This study would provide a promising protocol for fabricating gap microstructures with controllable configuration using MOPL technique.

λ/12 Super Resolution Achieved in Maskless Optical Projection Nanolithography for Efficient Cross-Scale Patterning.

The emerging demand for device miniaturization and integration prompts the patterning technique of micronano-cross-scale structures as an urgent desire. Lithography, as a sufficient patterning technique, has been playing an important role in achieving functional micronanoscale structures for decades. As a promising alternative, we have proposed and demonstrated the maskless optical projection nanolithography (MLOP-NL) technique for efficient cross-scale patterning. A minimum feature size of 32 nm, which is λ/12 super resolution breaking the optical diffraction limit, has been achieved by a single exposure. Furthermore, multiscale two-dimensional micronano-hybrid structures with the size over hundreds of micrometers and the precision at tens of nanometers have been fabricated by simply controlling the exposure conditions. The proposed MLOP-NL technique provides a powerful tool for achieving cross-scale patterning with both large-scale and precise configuration with high efficiency, which can be potentially used in the fabrication of multiscale integrated microsystems.

A mitochondria-targeting fluorescent probe for the selective detection of glutathione in living cells.

We report a fluorescent probe for the selective detection of mitochondrial glutathione (GSH). The probe, containing triphenylphosphine as a mitochondrial targeting group, exhibited ratiometric and selective detection of GSH over Cys/Hcy. The probe was used for imaging mitochondrial GSH in living HeLa cells.

Low threshold photonic crystal laser based on a Rhodamine dye doped high gain polymer.

We demonstrate low threshold lasing oscillation in a photonic crystal (PhC) laser by using tert-butyl Rhodamine B (t-Bu-RhB) doped gain media. Lactonic t-Bu-RhB is synthesized to improve doping concentration in polymethylmethacrylate (PMMA) films, and then isomerized to the zwitterion form to achieve highly fluorescent gain medium. The t-Bu-RhB doped PMMA film is sandwiched by a pair of polystyrene colloidal crystals to construct a PhC resonating cavity. Single-mode laser oscillation at 592 nm is observed when the PhC resonating cavity is pumped by a Nd:YAG laser. The lasing threshold is 0.12 MW cm(-2) utilizing 6.9 wt% t-Bu-RhB doped PMMA films, which is only 1/60 of that with 3 wt% t-Bu-RhB doped PMMA films. The concentration-dependent lasing action is attributed to different gain factors of the t-Bu-RhB doped PMMA films. Furthermore, a spatially and spectrally coherent laser beam from the PhC resonating cavity is verified by exploring the far-field image and angular dependence of the lasing emission. The approach provides a facile and efficient strategy to reduce the lasing threshold for fabricating low threshold PhC lasers.

Carboxylated Nanodiamond: Aggregation Properties in Aqueous Dispersion System and Application in Living Cell Fluorescence Imaging.

Nanodiamond, which has a lattice defect, the energy band gap and good biocompatibility, is an ideal inorganic fluorescent imaging material for cells. However, the nanodiamond aggregation is not exactly suitable for cells' endocytosis if the size is too small or too big. Therefore, it has a profound meaning to modify the surface of nanodiamond and control the dispersion of nanodiamond aggregate. In this study, the surface of the detonated nanodiamond is modified into carboxylated nanodiamond by using the method of mixed acid oxidation. Then, the nanodiamond aggregates' dispersion in water is regulated by adjusting the pH, which is first discussed as a factor influencing the size of nanodiamond aggregation. This process further induces the corresponding change of the electrostatic force between nanoparticles, improves its applicability in the field of living cell fluorescence imaging.

Transition of lasing modes in polymeric opal photonic crystal resonating cavity.

We demonstrate the transition of lasing modes in the resonating cavity constructed by polystyrene opal photonic crystals and 7 wt. % tert-butyl Rhodamine B doped polymer film. Both single mode and multiple mode lasing emission are observed from the resonating cavity. The lasing threshold is determined to be 0.81 µJ/pulse for single mode lasing emission and 2.25 µJ/pulse for multiple mode lasing emission. The single mode lasing emission is attributed to photonic lasing resulting from the photonic bandgap effect of the opal photonic crystals, while the multiple mode lasing emission is assigned to random lasing due to the defects in the photonic crystals. The result would benefit the development of low threshold polymeric solid state photonic crystal lasers.

Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery.

3D printing technology has attracted much attention due to its high potential in scientific and industrial applications. As an outstanding 3D printing technology, two-photon polymerization (TPP) microfabrication has been applied in the fields of micro/nanophotonics, micro-electromechanical systems, microfluidics, biomedical implants and microdevices. In particular, TPP microfabrication is very useful in tissue engineering and drug delivery due to its powerful fabrication capability for precise microstructures with high spatial resolution on both the microscopic and the nanometric scale. The design and fabrication of 3D hydrogels widely used in tissue engineering and drug delivery has been an important research area of TPP microfabrication. The resolution is a key parameter for 3D hydrogels to simulate the native 3D environment in which the cells reside and the drug is controlled to release with optimal temporal and spatial distribution in vitro and in vivo. The resolution of 3D hydrogels largely depends on the efficiency of TPP initiators. In this paper, we will review the widely used photoresists, the development of TPP photoinitiators, the strategies for improving the resolution and the microfabrication of 3D hydrogels.

Steering electromagnetic beams with conical curvature singularities.

We describe how the transformation-optics technique can be used to design an effective medium mimicking the conical curvature singularity. Anholonomic coordinate transformation gives rise to linear topological defects that break the rotational symmetry. The bending and splitting of the optical beams are found analytically and numerically, depending on the incident direction and the topological charge. Beyond their practical applications to omnidirectional beam steering for photonics, our findings set forth an attractive realm to simulate the relevant physical phenomena in the optical laboratory.

Perspective on Water-Soluble Two-Photon Initiator for Two-Photon Polymerization.

Two-photon polymerization (TPP) as an unparalleled technology empowers the rapid prototyping of customized three-dimensional (3D) micro/nanostructures, garnering noticeable interest in tissue engineering, drug delivery, and regenerative medicine. These applications have a high requirement on the biocompatibility and integrity of 3D structures. Therefore, it is important to develop two-photon initiator with good water-solubility, initiation efficiency, and biocompatibility. Here, we share our insights into the development of a water-soluble two-photon initiator (WTPI) and applications from the material and manufacturing perspective. We highlight the nonlinear optical properties and the synthesis of WTPI through three pathways. Then we further demonstrate the applications of the TPP technique in the aqueous phase in the fields of tissue engineering, 4D printing, and ceramic manufacturing. Finally, a general conclusion and outlook are provided for the future development and application of WTPI.

Femtosecond Laser Maskless Optical Projection Lithography of Cartilage PCM Inspired 3D Protein Matrix to Chondrocyte Phenotype.

Hydrogels containing chondrocytes have exhibited excellent potential in regenerating hyaline cartilage. However, chondrocytes are vulnerable to dedifferentiation during in vitro culture, leading to fibrosis and mechanical degradation of newly formed cartilage. It is proposed to modulate cartilage formation via the developed chondrocyte pericellular matrix (PCM) -like scaffolds for the first time, in which the S, M, and L-sized scaffolds are fabricated by femtosecond laser maskless optical projection lithography (FL-MOPL) of bovine serum albumin-glyceryl methacrylate hydrogel. Chondrocytes on the M PCM-like scaffold can maintain round morphology and synthesize extracellular matrix (ECM) to induce regeneration of hyaline cartilage microtissues by geometrical restriction. A series of M PCM-like scaffolds is fabricated with different stiffness and those with a high Young's modulus are more effective in maintaining the chondrocyte phenotype. The proposed PCM-like scaffolds are effective in modulating cartilage formation influenced by pore size, depth, and stiffness, which will pave the way for a better understanding of the geometric cues of mechanotransduction interactions in regulating cell fate and open up new avenues for tissue engineering.

Evaluating the Effectiveness of a Novel Personalized Health Education Approach for Hemodialysis Patients: A Four-Week Study Using a Widely-Used Communication App in Taiwan.

Dialysis patients often have inadequate health literacy, affecting self-care and outcomes. This study used LINE app to provide personalized health education to Taiwanese dialysis patients and collected physiological data via wearables. While physical activity levels remained unchanged, participants' disease literacy significantly improved post-intervention. Patients' health literacy will evaluate by Health Literacy Questionnaire for Taiwanese Hemodialysis patients (HLQHD). The findings highlight technology-driven interventions' potential to enhance health literacy and disease management among dialysis patients.

Multipatterned Chondrocytes' Scaffolds by FL-MOPL with a BSA-GMA Hydrogel to Regulate Chondrocytes' Morphology.

Repairing articular cartilage damage is challenging due to its low regenerative capacity. In vitro, cartilage regeneration is a potential strategy for the functional reconstruction of cartilage defects. A hydrogel is an advanced material for mimicking the extracellular matrix (ECM) due to its hydrophilicity and biocompatibility, which is known as an ideal scaffold for cartilage regeneration. However, chondrocyte culture in vitro tends to dedifferentiate, leading to fibrosis and reduced mechanical properties of the newly formed cartilage tissue. Therefore, it is necessary to understand the mechanism of modulating the chondrocytes' morphology. In this study, we synthesize photo-cross-linkable bovine serum albumin-glycidyl methacrylate (BSA-GMA) with 65% methacrylation. The scaffolds are found to be suitable for chondrocyte growth, which are fabricated by homemade femtosecond laser maskless optical projection lithography (FL-MOPL). The large-area chondrocyte scaffolds have holes with interior angles of triangle (T), quadrilateral (Q), pentagon (P), hexagonal (H), and round (R). The FL-MOPL polymerization mechanism, swelling, degradation, and biocompatibility of the BSA-GMA hydrogel have been investigated. Furthermore, cytoskeleton and nucleus staining reveals that the R-scaffold with larger interior angle is more effective in maintaining chondrocyte morphology and preventing dedifferentiation. The scaffold's ability to maintain the chondrocytes' morphology improves as its shape matches that of the chondrocytes. These results suggest that the BSA-GMA scaffold is a suitable candidate for preventing chondrocyte differentiation and supporting cartilage tissue repair and regeneration. The proposed method for chondrocyte in vitro culture by developing biocompatible materials and flexible fabrication techniques would broaden the potential application of chondrocyte transplants as a viable treatment for cartilage-related diseases.

Two-photon induced photopolymerization using photoinitiator with an intramolecular radical quenching moiety for nanolithography.

We have investigated the photoinitiating properties of the photoinitiator 3,6-bis[2-(4-nitrophenyl)-ethynyl]-9-(4-methoxy-benzyl)-carbazole (BNMBC), which has an intramolecular radical quenching group "p-methoxybenzyl," in the substrate lines fabrication of two-photon induced photopolymerization (TPIP). Another photoinitiator 3,6-bis[2-(4-nitrophenyl)-ethynyl]-9-benzyl-carbazole (BNBC) with similar chemical structure but not radical quenching group was studied for comparison. Their photopolymerization properties were studied with resins in which BNBC and BNMBC were used as photoinitiators with a molar ratio of 0.02%, respectively. The linewidth of polymer lines fabricated by TPIP of the photoresist that contained BNMBC could be decreased to 65% of those using BNBC. Besides, we introduced a radical quencher, phenyl methyl ether (PhOCH3), to BNBC and further studied the photopolymerization properties by using BNBC, BNBC/PhOCH3 and BNMBC as photoinitiators with a molar ratio of 0.1%. The results further indicated that BNMBC was effective to confine the radical diffusion in polymerization due to the radical quenching effect of moiety. This intramolecular radical quenching moiety exhibited more effective confining effect of radical diffusion compared to the intermolecular radical quencher PhOCH3. Furthermore, arbitrary complex three-dimensional (3D) microstructure was achieved using the photoresist with photoinitiator BNMBC. The approach could open up broad prospect for improving the resolution in TPIP.

Synthesis of biocompatible BSA-GMA and two-photon polymerization of 3D hydrogels with free radical type I photoinitiator.

Although the development of three-dimensional (3D) printing technology is growing rapidly in the biomedical field, it remains a challenge to achieve arbitrary 3D structures with high resolution and high efficiency. Protein hydrogels fabricated by two- photon polymerization (TPP) have excellent mechanical properties, high precision, and 3D architecture. However, a large number of the amino acid group in bovine serum albumin (BSA) would be consumed when the protein-based hydrogels use dyes of free radical type II photoinitiators. In this study, we use glycidyl methacrylate (GMA) to modify BSA molecules to obtain a series of BSA-GMA materials, allowing the protein material to be two-photon polymerized with a water-soluble free radical type I photoinitiator. The precisely controllable 3D structure of the BSA-GMA hydrogel was fabricated by adjusting the concentration of the precursor solution, the degree of methacrylation, and the processing parameters of the TPP technique. Importantly, BSA-GMA materials are free of acidic hazardous substances. Meanwhile, the water-soluble initiator lithium phenyl (2,4,6-trimethylbenzoyl) phosphite (LAP) allows TPP on the vinyl group of the GMA chain and thus without consuming its amino acid group. The as-prepared BSA-GMA hydrogel structure exhibits excellent autofluorescence imaging, pH responsiveness, and biocompatibility, which would provide new avenues for potential applications in tissue engineering and biomedical fields to meet specific biological requirements.

22 nm Resolution Achieved by Femtosecond Laser Two-Photon Polymerization of a Hyaluronic Acid Vinyl Ester Hydrogel.

Three-dimensional (3D) bioinspired hydrogels have played an important role in tissue engineering, owing to their advantage of excellent biocompatibility. Here, the two-photon polymerization (TPP) of a 3D hydrogel with high precision has been investigated, using the precursor with hyaluronic acid vinyl ester (HAVE) as the biocompatibility hydrogel monomer, 3,3'-((((1E,1'E)-(2-oxocyclopentane-1,3-diylidene) bis(methanylylidene)) bis(4,1-phenylene)) bis(methylazanediyl))dipropanoate as the water-soluble initiator, and dl-dithiothreitol (DTT) as the click-chemistry cross-linker. The TPP properties of the HAVE precursors have been comprehensively investigated by adjusting the solubility and the formulation of the photoresist. The feature line width of 22 nm has been obtained at a processing laser threshold of 3.67 mW, and the 3D hydrogel scaffold structures have been fabricated. Furthermore, the average value of Young's modulus is 94 kPa for the 3D hydrogel, and cell biocompatibility has been demonstrated. This study would provide high potential for achieving a 3D hydrogel scaffold with highly precise configuration in tissue engineering and biomedicine.