RESUMO
Electrocatalytic carbon dioxide reduction (CO2R) in neutral electrolytes can mitigate the energy and carbon losses caused by carbonate formation but often experiences unsatisfied multicarbon selectivity and reaction rates because of the kinetic limitation to the critical carbon monoxide (CO)-CO coupling step. Here, we describe that a dual-phase copper-based catalyst with abundant Cu(I) sites at the amorphous-nanocrystalline interfaces, which is electrochemically robust in reducing environments, can enhance chloride-specific adsorption and consequently mediate local *CO coverage for improved CO-CO coupling kinetics. Using this catalyst design strategy, we demonstrate efficient multicarbon production from CO2R in a neutral potassium chloride electrolyte (pH â¼6.6) with a high Faradaic efficiency of 81% and a partial current density of 322 milliamperes per square centimeter. This catalyst is stable after 45 h of operation at current densities relevant to commercial CO2 electrolysis (300 mA per square centimeter).
RESUMO
Electrosynthesis of hydrogen peroxide (H2 O2 ) in the acidic environment could largely prevent its decomposition to water, but efficient catalysts that constitute entirely earth-abundant elements are lacking. Here we report the experimental demonstration of narrowing the interlayer gap of metallic cobalt diselenide (CoSe2 ), which creates high-performance catalyst to selectively drive two-electron oxygen reduction toward H2 O2 in an acidic electrolyte. The enhancement of the interlayer coupling between CoSe2 atomic layers offers a favorable surface electronic structure that weakens the critical *OOH adsorption, promoting the energetics for H2 O2 production. Consequently, on the strongly coupled CoSe2 catalyst, we achieved Faradaic efficiency of 96.7 %, current density of 50.04â milliamperes per square centimeter, and product rate of 30.60â mg cm-2 h-1 . Moreover, this catalyst shows no sign of degradation when operating at -63 milliamperes per square centimeter over 100â hours.
RESUMO
Although the Turing structures, or stationary reaction-diffusion patterns, have received increasing attention in biology and chemistry, making such unusual patterns on inorganic solids is fundamentally challenging. We report a simple cation exchange approach to produce Turing-type Ag2 Se on CoSe2 nanobelts relied on diffusion-driven instability. The resultant Turing-type Ag2 Se-CoSe2 material is highly effective to catalyze the oxygen evolution reaction (OER) in alkaline electrolytes with an 84.5 % anodic energy efficiency. Electrochemical measurements show that the intrinsic OER activity correlates linearly with the length of Ag2 Se-CoSe2 interfaces, determining that such Turing-type interfaces are more active sites for OER. Combing X-ray absorption and computational simulations, we ascribe the excellent OER performance to the optimized adsorption energies for critical oxygen-containing intermediates at the unconventional interfaces.
RESUMO
Selective and efficient catalytic conversion of carbon dioxide (CO2) into value-added fuels and feedstocks provides an ideal avenue to high-density renewable energy storage. An impediment to enabling deep CO2 reduction to oxygenates and hydrocarbons (e.g., C2+ compounds) is the difficulty of coupling carbon-carbon bonds efficiently. Copper in the +1 oxidation state has been thought to be active for catalyzing C2+ formation, whereas it is prone to being reduced to Cu0 at cathodic potentials. Here we report that catalysts with nanocavities can confine carbon intermediates formed in situ, which in turn covers the local catalyst surface and thereby stabilizes Cu+ species. Experimental measurements on multihollow cuprous oxide catalyst exhibit a C2+ Faradaic efficiency of 75.2 ± 2.7% at a C2+ partial current density of 267 ± 13 mA cm-2 and a large C2+-to-C1 ratio of â¼7.2. Operando Raman spectra, in conjunction with X-ray absorption studies, confirm that Cu+ species in the as-designed catalyst are well retained during CO2 reduction, which leads to the marked C2+ selectivity at a large conversion rate.
RESUMO
A considerable challenge in the conversion of carbon dioxide into useful fuels comes from the activation of CO2 to CO2 .- or other intermediates, which often requires precious-metal catalysts, high overpotentials, and/or electrolyte additives (e.g., ionic liquids). We report a microwave heating strategy for synthesizing a transition-metal chalcogenide nanostructure that efficiently catalyzes CO2 electroreduction to carbon monoxide (CO). We found that the cadmium sulfide (CdS) nanoneedle arrays exhibit an unprecedented current density of 212â mA cm-2 with 95.5±4.0 % CO Faraday efficiency at -1.2â V versus a reversible hydrogen electrode (RHE; without iR correction). Experimental and computational studies show that the high-curvature CdS nanostructured catalyst has a pronounced proximity effect which gives rise to large electric field enhancement, which can concentrate alkali-metal cations resulting in the enhanced CO2 electroreduction efficiency.
RESUMO
The design of highly efficient non-noble-metal electrocatalysts for large-scale hydrogen production remains an ongoing challenge. We report here a Ni2P nanoarray catalyst grown on a commercial Ni foam substrate, which demonstrates an outstanding electrocatalytic activity and stability in basic electrolyte. The high catalytic activity can be attributed to the favorable electron transfer, superior intrinsic activity, and the intimate connection between the nanoarrays and their substrate. Moreover, the unique "superaerophobic" surface feature of the Ni2P nanoarrays enables a remarkable capability to withstand internal and external forces and release the in situ generated H2 bubbles in a timely manner at large current densities (such as >1000 mA cm-2) where the hydrogen evolution becomes vigorous. Our results highlight that an aerophobic structure is essential to catalyze gas evolution for large-scale practical applications.
RESUMO
Since being proposed by John Bockris in 1970, hydrogen economy has emerged as a very promising alternative to the current hydrocarbon economy. Access to reliable and affordable hydrogen economy, however, requires cost-effective and highly efficient electrocatalytic materials that replace noble metals (e.g., Pt, Ir, Ru) to negotiate electrode processes such as oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR). Although substantial advances in the development of inexpensive catalysts, successful deployment of these materials in fuel cells and electrolyzers will depend on their improved activity and robustness. Recent research has demonstrated that the nanostructuring of Earth-abundant minerals provides access to newly advanced energy materials, particularly for nanostructured pyrites, which are attracting great interest. Crystalline pyrites commonly contain the characteristic dianion units and have cations occurring in octahedral coordination-whose generalized formula is MX2, where M can be transition metal of groups 8-12 and X is a chalcogen. The diversity of pyrites that are accessible and their versatile and tunable properties make them attractive for a wide range of applications from photovoltaics to energy storage and electrocatalysis. Pyrite-type structures can be further extended to their ternary analogues, for example, CoAsS (cobaltite), NiAsS (gersdorffite), NiSbS (ullmannite), CoPS, and many others. Moreover, improved properties of pyrites can be realized through grafting them with promoter objects (e.g., metal oxides, metal chalcogenides, noble metals, and carbons), which bring favorable interfaces and structural and electronic modulations, thus leading to performance gains. In recent years, research on the synthesis of pyrite nanomaterials and on related structure understanding has dramatically advanced their applications, which offers new perspectives in the search for efficient and robust electrocatalysts, yet a focused review that concentrates the critical developments is still missing. In this Account, we describe our recent progress on the discoveries and applications of nanostructured pyrite-type materials in the area of electrocatalysis. We first briefly highlight some interesting properties of pyrite-type materials and why they are attractive for modern electrocatalysis. Some recent advances on their synthesis that allows access to highly nanostructured pyrite-type materials are reviewed, along with the grafting of resultant pyrites with foreign materials (e.g., metal oxides, metal chalcogenides, noble metals, and carbons) to enable improved catalytic performances. We finally spotlight the exciting examples where pyrite nanostructures were used as efficient electrocatalysts to drive the OER, HER, and methanol-tolerant ORR. It is reasonable to assume that, with significant efforts and focus, the next few years will bring new advances on the pyrites and other minerals for electrocatalysis.
RESUMO
Transition-metal phosphides have stimulated great interest as catalysts to drive the hydrogen evolution reaction (HER), but their use as bifunctional catalytic electrodes that enable efficient neutral-pH water splitting has rarely been achieved. Herein, we report the synthesis of ternary Ni0.1 Co0.9 P porous nanosheets onto conductive carbon fiber paper that can efficiently and robustly catalyze both the HER and water oxidation in 1 m phosphate buffer (PBS; pHâ 7) electrolyte under ambient conditions. A water electrolysis cell comprising the Ni0.1 Co0.9 P electrodes demonstrates remarkable activity and stability for the electrochemical splitting of neutral-pH water. We attribute this performance to the new ternary Ni0.1 Co0.9 P structure with porous surfaces and favorable electronic states resulting from the synergistic interplay between nickel and cobalt. Ternary metal phosphides hold promise as efficient and low-cost catalysts for neutral-pH water splitting devices.
RESUMO
Ultrathin nanostructures are attractive for diverse applications owing to their unique properties compared to their bulk materials. Transition-metal chalcogenides are promising electrocatalysts, yet it remains difficult to make ultrathin structures (sub-2â nm), and the realization of their chemical doping is even more challenging. Herein we describe a soft-template mediated colloidal synthesis of Fe-doped NiSe2 ultrathin nanowires (UNWs) with diameter down to 1.7â nm. The synergistic interplay between oleylamine and 1-dodecanethiol is crucial to yield these UNWs. The inâ situ formed amorphous hydroxide layers that is confined to the surface of the ultrathin scaffolds enable efficient oxygen evolution electrocatalysis. The UNWs exhibit a very low overpotential of 268â mV at 10â mA cm-2 in 0.1 m KOH, as well as remarkable long-term stability, representing one of the most efficient noble-metal-free catalysts.
RESUMO
Cobalt-based nanomaterials have been intensively explored as promising noble-metal-free oxygen evolution reaction (OER) electrocatalysts. Herein, we report phase-selective syntheses of novel hierarchical CoTe2 and CoTe nanofleeces for efficient OER catalysts. The CoTe2 nanofleeces exhibited excellent electrocatalytic activity and stablity for OER in alkaline media. The CoTe2 catalyst exhibited superior OER activity compared to the CoTe catalyst, which is comparable to the state-of-the-art RuO2 catalyst. Density functional theory calculations showed that the binding strength and lateral interaction of the reaction intermediates on CoTe2 and CoTe are essential for determining the overpotential required under different conditions. This study provides valuable insights for the rational design of noble-metal-free OER catalysts with high performance and low cost by use of Co-based chalcogenides.
RESUMO
CeO2 /CoSe2 nanobelt composite for electrochemical water oxidation: A new CeO2 /CoSe2 nanobelt composite is developed as a highly effective water oxidation electrocatalyst by growing CeO2 nanoparticle CoSe2 nanobelts in situ via a simple polyol reduction route. The constructed hybrid catalyst shows extremely high oxgen evolution reaction (OER) activity, even beyond the state-of-the-art RuO2 catalyst in alkaline media.
RESUMO
Resorcinol-formaldehyde (RF) and graphene oxide (GO) aerogels have found a variety of applications owing to their excellent properties and remarkable flexibility. However, the macroscopic and controllable synthesis of their composite gels is still a great challenge. By using GO sheets as template skeletons and metal ions (Co(2+), Ni(2+), or Ca(2+)) as catalysts and linkers, the first low-temperature scalable strategy for the synthesis of a new kind of RF-GO composite gel with tunable densities and mechanical properties was developed. The aerogels can tolerate a strain as high as 80% and quickly recover their original morphology after the compression has been released. Owing to their high compressibility, the gels might find applications in various areas, for example, as adsorbents for the removal of dye pollutants and in oil-spill cleanup.
RESUMO
With the rapid development of anion exchange membrane technology and the availability of high-performance non-noble metal cathode catalysts in alkaline media, the commercialization of anion exchange membrane fuel cells has become feasible. Currently, anode materials for alkaline anion-exchange membrane fuel cells still rely on platinum-based catalysts, posing a challenge to the development of efficient low-Pt or Pt-free catalysts. Low-cost ruthenium-based anodes are being considered as alternatives to platinum. However, they still suffer from stability issues and strong oxophilicity. Here, we employ a metal-organic framework compound as a template to construct three-dimensional porous ruthenium-tungsten-zinc nanocages via solvothermal and high-temperature pyrolysis methods. The experimental results demonstrate that this porous ruthenium-tungsten-zinc nanocage with an electrochemical surface area of 116 m2 g-1 exhibits excellent catalytic activity for hydrogen oxidation reaction in alkali, with a kinetic density 1.82 times and a mass activity 8.18 times higher than that of commercial Pt/C, and a good catalytic stability, showing no obvious degradation of the current density after continuous operation for 10,000 s. These findings suggest that the developed catalyst holds promise for use in alkaline anion-exchange membrane fuel cells.
RESUMO
Finding highly efficient hydrogen evolution reaction (HER) catalysts is pertinent to the ultimate goal of transformation into a net-zero carbon emission society. The design principles for such HER catalysts lie in the well-known structure-property relationship, which guides the synthesis procedure that creates catalyst with target properties such as catalytic activity. Here we report a general strategy to synthesize 10 kinds of single-atom-doped CoSe2-DETA (DETA = diethylenetriamine) nanobelts. By systematically analyzing these products, we demonstrate a volcano-shape correlation between HER activity and Co atomic configuration (ratio of Co-N bonds to Co-Se bonds). Specifically, Pb-CoSe2-DETA catalyst reaches current density of 10 mA cm-2 at 74 mV in acidic electrolyte (0.5 M H2SO4, pH ~0.35). This striking catalytic performance can be attributed to its optimized Co atomic configuration induced by single-atom doping.
RESUMO
Large-scale deployment of proton exchange membrane (PEM) water electrolyzers has to overcome a cost barrier resulting from the exclusive adoption of platinum group metal (PGM) catalysts. Ideally, carbon-supported platinum used at cathode should be replaced with PGM-free catalysts, but they often undergo insufficient activity and stability subjecting to corrosive acidic conditions. Inspired by marcasite existed under acidic environments in nature, we report a sulfur doping-driven structural transformation from pyrite-type cobalt diselenide to pure marcasite counterpart. The resultant catalyst drives hydrogen evolution reaction with low overpotential of 67 millivolts at 10 milliamperes per square centimeter and exhibits no degradation after 1000 hours of testing in acid. Moreover, a PEM electrolyzer with this catalyst as cathode runs stably over 410 hours at 1 ampere per square centimeter and 60°C. The marked properties arise from sulfur doping that not only triggers formation of acid-resistant marcasite structure but also tailors electronic states (e.g., work function) for improved hydrogen diffusion and electrocatalysis.
RESUMO
The design of efficient, cheap, and abundant oxygen evolution reaction (OER) catalysts is crucial to the development of sustainable energy sources for powering fuel cells. We describe here a novel Mn(3)O(4)/CoSe(2) hybrid which could be a promising candidate for such electrocatalysts. Possibly due to the synergetic chemical coupling effects between Mn(3)O(4) and CoSe(2), the constructed hybrid displayed superior OER catalytic performance relative to its parent CoSe(2)/DETA nanobelts. Notably, such earth-abundant cobalt (Co)-based catalyst afforded a current density of 10 mA cm(-2) at a small overpotential of ~0.45 V and a small Tafel slope down to 49 mV/decade, comparable to the best performance of the well-investigated cobalt oxides. Moreover, this Mn(3)O(4)/CoSe(2) hybrid shows good stability in 0.1 M KOH electrolyte, which is highly required to a promising OER electrocatalyst.
RESUMO
We report a first solution strategy for controlled synthesis of Adams' catalyst (i.e., α-PtO(2)) by a facile and totally green approach using H(2)PtCl(6) and water as reactants. The prepared α-PtO(2) nanocrystals (NCs) are ultrasmall in size and have very "clean" surfaces, which can be reduced to Pt NCs easily in ethanol under ambient conditions. Such Adams' catalysts have been applied as electrocatalysts beyond the field of heterogeneous catalysis. Noticeably, the water-only synthesized α-PtO(2) NCs and their derivative Pt NCs all exhibit much higher oxygen reduction reaction (ORR) activities and stabilities than that of the state-of-art Pt/C electrocatalysts. This study provides an example on the organics-free synthesis of α-PtO(2) and Pt NCs as promising cathode catalysts for fuel cell applications and, particularly, this simple, straightforward method may open a new way for the synthesis of other "clean" functional nanomaterials.
RESUMO
Background: The latest incidence and disability-adjusted life-years (DALYs) of major bacterial skin diseases (BSD) and their relationship with socioeconomic are not readily available. Objective: Describe the global age-standardized incidence and DALYs rates of BSD and analyze their relationship with socioeconomic. Methods: All data were obtained from Global Burden of Disease (GBD) 2019 database. The correlation between BSD and socioeconomic development status was analyzed. Results: The age-standardized incidence and age-standardized DALYs rate of BSD are: 169.72 million [165.28-175.44] and 0.41 million [0.33-0.48]. Of the two main BSD, pyoderma cause significantly much heavier burden than cellulitis. The change of age-standardized incidence (7.38% [7.06-7.67]) and DALYs (-10.27% [-25.65 to 25.45]) rate of BSD presented an upward or downward trend from 1990 to 2019. The highest burden was in the low-middle sociodemographic index (SDI) area while the area with the lowest burden was recorded in the high-middle SDI area in 2019. Limitations: GBD 2019 data of BSD are derived from estimation and mathematical modeling. Conclusion: The burden of BSD is related to socioeconomic development status. The results based on GBD2019 data may benefit policymakers in guiding priority-setting decisions for the global burden of BSD.
RESUMO
Electrochemical generation of hydrogen peroxide (H2 O2 ) by two-electron oxygen reduction offers a green method to mitigate the current dependence on the energy-intensive anthraquinone process, promising its on-site applications. Unfortunately, in alkaline environments, H2 O2 is not stable and undergoes rapid decomposition. Making H2 O2 in acidic electrolytes can prevent its decomposition, but choices of active, stable, and selective electrocatalysts are significantly limited. Here, the selective and efficient two-electron reduction of oxygen toward H2 O2 in acid by a composite catalyst that is composed of black phosphorus (BP) nailed chemically on the metallic cobalt diselenide (CoSe2 ) surface is reported. It is found that this catalyst exhibits a 91% Faradic efficiency for H2 O2 product at an overpotential of 300 mV. Moreover, it can mediate oxygen to H2 O2 with a high production rate of ≈1530 mg L-1 h-1 cm-2 in a flow-cell reactor. Spectroscopic and computational studies together uncover a BP-induced surface charge redistribution in CoSe2 , which leads to a favorable surface electronic structure that weakens the HOO* adsorption, thus enhancing the kinetics toward H2 O2 formation.
RESUMO
Bio-inspired synthesis of functional materials with highly ordered structure and tunable properties is of particular interest, but efficient approaches that allow the access of these materials are still limited. A method has been developed for the preparation of hematite particles by using xonotlite nanowires (XNWs) as growth modifiers. The concentration of the XNWs has a profound effect on the final morphology of the products, whereas the concentration of the iron(III) ions can control the size of the hematite particles. The underlying mechanism of the bio-inspired XNW-modified mineralization process has been proposed. The obtained hematite particles exhibit good catalytic performance in the oxygen evolution reaction (OER), affording a current density of 10â mA cm-2 with an overpotential of 370â mV, a small Tafel slope of 65â mV dec-1 , and good stability in alkaline electrolyte. This strategy for preparing functional materials by using nanowires as the growth modifiers has great potential for future application in the construction of various materials with hierarchical structures.