RESUMO
Bright, scalable, and deterministic single-photon emission (SPE) is essential for quantum optics, nanophotonics, and optical information systems. Recently, SPE from hexagonal boron nitride (h-BN) has attracted intense interest because it is optically active and stable at room temperature. Here, we demonstrate a tunable quantum emitter array in h-BN at room temperature by integrating a wafer-scale plasmonic array. The transient voltage electrophoretic deposition (EPD) reaction is developed to effectively enhance the filling of single-crystal nanometals in the designed patterns without aggregation, which ensures the fabricated array for tunable performances of these single-photon emitters. An enhancement of â¼500% of the SPE intensity of the h-BN emitter array is observed with a radiative quantum efficiency of up to 20% and a saturated count rate of more than 4.5 × 106 counts/s. These results suggest the integrated h-BN-plasmonic array as a promising platform for scalable and controllable SPE photonics at room temperature.
RESUMO
Broader spectra, lower reflectivity and higher reliability are the performance requirements for broadband antireflective (BBAR) films. In this work, a BBAR film structure was proposed, which maintains extremely low reflectivity, ultra-wide spectra, low polarization sensitivity and practical reliability. The BBAR film consists of a dense multilayer interference stack on the bottom and a nano-grass-like alumina (NGLA) layer with a gradient low refractive index distribution on the top. The film was deposited by atomic layer deposition, while the NGLA layer was formed by means of a hot water bath on Al2O3 layer. The top NGLA layer has extremely high porosity and ultra-low refractive index, along with extremely fragile structure. To surmount the fragility of NGLA layer, a sub-nano layer of SiO2 was grown by atomic layer deposition to solidify its structure and also to adjust the refractive index with different thicknesses of SiO2. Finally, in the wide wavelength range of 400-1100â nm, the average transmittance of the double-sided coated fused quartz reaches 99.2%. The absorption, light scattering, reliability and polarization characteristics of BBAR films were investigated. An optimized BBAR film with low polarization-sensitivity and improved reliability was realized, which should be potentially promising for application in optical systems.
RESUMO
A reaction chamber of atomic layer deposition (ALD) was developed for simultaneous coating on the inner and outer surfaces of a large-size and strongly curved glass bowl. The inner surface ALD process was in a showerhead reaction mode and the outer surface ALD process was in a cross-flow reaction mode. Blue reflection (BR) film of 400 nm wavelength and broadband antireflection (BBAR) film of 400-700 nm wavelength were coated on different glass bowls by ALD. The spectral uniformity of both coated bowls was studied. The measured spectra at multiple positions of the glass bowl with the BBAR coating show better spectral uniformity along the circumference than the depth. The spectral deviation is mainly caused by the non-uniformity of the film on the outer surface (<±3%), and the film on the inner surface has good uniformity along both the circumference and the depth (<±0.7%). The growth rate of the outer film was reduced by 10% on average compared to that of the inner film due to the different gas flow mode.
RESUMO
Sprague Dawley rats and Kunming (KM) mice are artificially infected with type II Toxoplasma gondii strain Prugniaud (Pru) to generate toxoplasmosis, which is a fatal disease mediated by T. gondii invasion of the central nervous system (CNS) by unknown mechanisms. The aim is to explore the mechanism of differential susceptibility of mice and rats to T. gondii infection. Therefore, a strategy of isobaric tags for relative and absolute quantitation (iTRAQ) is established to identify differentially expressed proteins (DEPs) in the rats' and the mice's brains compared to the healthy groups. In KM mice, which is susceptible to T. gondii infection, complement component 3 (C3) is upregulated and the tight junction (TJ) pathway shows a disorder. It is presumed that T. gondii-stimulated C3 disrupts the TJ of the blood-brain barrier in the CNS. This effect allows more T. gondii passing to the brain through the intercellular space.
Assuntos
Complemento C3/imunologia , Toxoplasma/imunologia , Toxoplasmose Animal/imunologia , Animais , Encéfalo/imunologia , Encéfalo/parasitologia , Complemento C3/genética , Feminino , Masculino , Camundongos , Proteínas/genética , Proteínas/imunologia , Ratos Sprague-Dawley , Especificidade da Espécie , Toxoplasmose Animal/genética , Toxoplasmose Animal/parasitologia , Regulação para CimaRESUMO
MgxZn1-xO (ZMO) thin films with tunable Mg content were deposited by atomic layer deposition (ALD) on silicon substrates at 190 °C. The elemental and structural properties were acquired by X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy and X-ray diffraction. Spectroscopic ellipsometry measurements were performed to reveal the evolution of the dielectric functions and critical points in the ZMO thin films by point-by-point fit in the photon energy range of 1.2-6.0 eV. The dependence of the dielectric functions on doping content is clearly demonstrated and physically explained. The critical point energies and the types of interband optical transitions were extracted from standard lineshape analysis of the second derivatives of the dielectric functions. The critical point features were discussed in terms of band structure modification and structural homogeneity arisen by introducing the Mg dopant into the films. Controlling these transitions by changing the doping content will be of practical significance in emerging ZMO-based thin-film photonic and optoelectronic devices.
RESUMO
Centimeter-scale WS2 ultrathin films were synthesized on sapphire substrates, and they showed highly oriented crystallographic growth along the c axis. Afterwards, the as-grown samples were systematically characterized using various detection methods. Reliable values of the roughness layer thickness and the film thickness were extracted using both atomic force microscopy (AFM) and spectroscopic ellipsometry (SE), and identified using Raman spectroscopy as well. The expansion and tensile strain along the [001] direction were discovered using X-ray diffraction (XRD) measurements. Accurate dielectric functions of WS2 films were derived from the point-by-point fitting results. The critical points (CPs) of WS2, which have not been reported so far, are precisely extracted from the standard critical point (SCP) model. Their origins are uniquely assigned to different interband electronic transitions in the Brillouin zone, including some novel optical structures above 3 eV, which were not investigated in earlier studies. In this work, it is found that dielectric functions are thickness-dependent, while CPs have an opposite nature, and their intrinsic mechanisms are revealed. The as-obtained results can be expected to help people develop more extensive applications of WS2.
RESUMO
A new method for measuring the dielectric functions change with the thickness of nanometal thin films was proposed. To confirm the accuracy and reliability of the method, a nano-thin wedge-shaped gold (Au) film with continuously varied thicknesses was designed and prepared on K9 glass by direct-current-sputtering (DC-sputtering). The thicknesses and the dielectric functions in the wavelength range of 300-1100 nm of the nano-thin Au films were obtained by fitting the ellipsometric parameters with the Drude and critical points model. Results show that while the real part of the dielectric function (ϵ1) changes marginally with increasing film thickness, the imaginary part (ϵ2) decreases drastically with the film thickness, approaching a stable value when the film thickness increases up to about 42 nm. This method is particularly useful in the study of thickness-dependent optical properties of nano-thin film.
RESUMO
The band gap and defect features of ultrathin ZrO2 films with varying thicknesses have been investigated by spectroscopic ellipsometry through the point-by-point data inversion method. The ε2-sprectra in the 3-6 eV range are extracted based on an optical model consisting of a Si substrate/effective ZrO2 film/air ambient structure where the effective ZrO2 film is a combination of interfacial layers and ZrO2. Evident widening of the band gap with a reducing size is observed when the effective ZrO2 films are below a critical thickness, somewhere between 8.80 nm and 17.13 nm. This is due to quantum-confinement and amorphous effects. Moreover, the sub-band-gap defects at interfacial layers and in bulk ZrO2 are identified and present strong thickness dependence as well. The interfacial defects at 3.26, 4.13, 4.43, and 4.77 eV mainly exist below the critical thickness and exhibit a significant suppression with increasing film thickness. The bulk defects at 4.15 eV and 4.46 eV dominate in ZrO2 films once they are over the critical thickness. The evolution of the band gap and defects is closely related to variance in the electronic structure of amorphous ZrO2. Our results may be helpful in understanding controversial problems concerning the size effect on ultrathin high-k oxide films and exploring the further miniaturization of electronic devices based on them.
RESUMO
An approach extracting information of both optical monitoring signal and phase thickness of deposited layer on a trace diagram is proposed. Realtime fitting and calculation are performed to get both practical thickness and refractive index of deposited layer with the assist of quartz crystal monitoring for keeping steady rate of deposition. Monitoring error of thickness using this approach is analyzed. It was used to obtain the refractive indices and thickness of Ge layer and SiO layer in in situ measurement mode, and the results were compared with those of ex-situ spectral measurement using infrared spectrometer. The effectiveness of the proposed monitoring method was verified by fabricating narrow bandpass filter consisting of quarter-wave and non-quarter-wave layers.
RESUMO
The optical properties and thermal stability of a 6-layered metal/dielectric film structure are investigated in this work. A high optical absorption average of > 98% is achieved in the broad spectral range of 250-1200 nm with experiment results, in good agreement with our simulated results. The samples have a typical layered structure of: SiO(2)(57.3 nm)/Ti(5.7 nm)/SiO(2) (67.1 nm)/Ti(11.6 nm)/SiO(2)(51.4 nm)/Cu(>100 nm), deposited on optically polished Si or K9-glass substrates by magnetron sputtering. The sample of the 6-layered metal/dielectric film structure has an AM1.5G solar absorptance of 95.5% with the features of low thermal emittance of 0.136 at 700K and good thermal stability, and will be potentially suitable for practical application in high-efficiency solar absorber devices in many fields.
RESUMO
BACKGROUND: Toxoplasma gondii is an intracellular protozoan parasite that is widely distributed in humans and warm-blooded animals. T. gondii chronic infections can cause toxoplasmic encephalopathy, adverse pregnancy, and male reproductive disorders. In male reproduction, the main function of the testis is to provide a stable place for spermatogenesis and immunological protection. The disorders affecting testis tissue encompass abnormalities in the germ cell cycle, spermatogenic retardation, or complete cessation of sperm development. However, the mechanisms of interaction between T. gondii and the reproductive system is unclear. The aims were to study the expression levels of genes related to spermatogenesis, following T. gondii infection, in mouse testicular tissue. METHODS: RNA-seq sequencing was carried out on mouse testicular tissues from mice infected or uninfected with the T. gondii type II Prugniaud (PRU) strain and validated in combination with real-time quantitative PCR and immunofluorescence assays. RESULTS: The results showed that there were 250 significant differentially expressed genes (DEGs) (P < 0.05, |log2fold change| ⧠1). Bioinformatics analysis showed that 101 DEGs were annotated to the 1696 gene ontology (GO) term. While there was a higher number of DEGs in the biological process classification as a whole, the GO enrichment revealed a significant presence of DEGs in the cellular component classification. The Arhgap18 and Syne1 genes undergo regulatory changes following T. gondii infection, and both were involved in shaping the cytoskeleton of the blood-testis barrier (BTB). The number of DEGs enriched in the MAPK signaling pathway, the ERK1/2 signaling pathway, and the JNK signaling pathway were significant. The PTGDS gene is located in the Arachidonic acid metabolism pathway, which plays an important role in the formation and maintenance of BTB in the testis. The expression of PTGDS is downregulated subsequent to T. gondii infection, potentially exerting deleterious effects on the integrity of the BTB and the spermatogenic microenvironment within the testes. CONCLUSIONS: Overall, our research provides in-depth insights into how chronic T. gondii infection might affect testicular tissue and potentially impact male fertility. These findings offer a new perspective on the impact of T. gondii infection on the male reproductive system.
Assuntos
Testículo , Toxoplasma , Toxoplasmose Animal , Transcriptoma , Animais , Masculino , Camundongos , Testículo/parasitologia , Testículo/metabolismo , Toxoplasma/genética , Toxoplasmose Animal/parasitologia , Espermatogênese/genética , Perfilação da Expressão Gênica , Doença Crônica , Biologia ComputacionalRESUMO
Cut-off filters are usually operating at oblique incidence and exhibit polarization dependence properties. We propose a simple approach to design cut-off filters with low linear polarization sensitivity (LPS) based on dielectric-metal-dielectric (DMD) stacks. The designing method is derived from the theory of optical film characteristic matrix. The admittance loci of the film are adjusted to achieve similar spectral properties of s- and p-polarized light at oblique incidence. Different film structures are designed non-polarizing at different angles of incidence with the method. The results show that the designing method is efficient for designing non-polarizing cut-off filters, which are widely used in non-polarizing optical system.
RESUMO
It is of great technological importance in the field of plasmonic color generation to establish and understand the relationship between optical responses and the reflectance of metallic nanoparticles. Previously, a series of indium nanoparticle ensembles were fabricated using electron beam evaporation and inspected using spectroscopic ellipsometry (SE). The multi-oscillator Lorentz-Drude model demonstrated the optical responses of indium nanoparticles with different sizes and size distributions. The reflectance spectra and colorimetry characteristics of indium nanoparticles with unimodal and bimodal size distributions were interpreted based on the SE analysis. The trends of reflectance spectra were explained by the transfer matrix method. The effects of optical constants n and k of indium on the reflectance were demonstrated by mapping the reflectance contour lines on the n-k plane. Using oscillator decomposition, the influence of different electron behaviors in various indium structures on the reflectance spectra was revealed intuitively. The contribution of each oscillator on the colorimetry characteristics, including hue, lightness and saturation, were determined and discussed from the reflectance spectral analysis.
RESUMO
Optical properties and thermal stability of the solar selective absorber based on the metal/dielectric four-layer film structure were investigated in the variable temperature region. Numerical calculations were performed to simulate the spectral properties of multilayer stacks with different metal materials and film thickness. The typical four-layer film structure using the transition metal Cr as the thin solar absorbing layer [SiO(2)(90nm)/Cr(10nm)/SiO(2)(80nm)/Al (≥100nm)] was fabricated on the Si or K9 glass substrate by using the magnetron sputtering method. The results indicate that the metal/dielectric film structure has a good spectral selective property suitable for solar thermal applications with solar absorption efficiency higher than 95% in the 400-1200nm wavelength range and a very low thermal emittance in the infrared region. The solar selective absorber with the thin Cr layer has shown a good thermal stability up to the temperature of 873K under vacuum atmosphere. The experimental results are in good agreement with the calculated spectral results.
Assuntos
Cromo/química , Membranas Artificiais , Nanopartículas/química , Energia Solar , Absorção , Cromo/efeitos da radiação , Transferência de Energia , Teste de Materiais , Nanopartículas/efeitos da radiação , TemperaturaRESUMO
In order to overcome some physical limits, a solar system consisting of five single-junction photocells with four optical filters is studied. The four filters divide the solar spectrum into five spectral regions. Each single-junction photocell with the highest photovoltaic efficiency in a narrower spectral region is chosen to optimally fit into the bandwidth of that spectral region. Under the condition of solar radiation ranging from 2.4 SUN to 3.8 SUN (AM1.5G), the measured peak efficiency under 2.8 SUN radiation reaches about 35.6%, corresponding to an ideal efficiency of about 42.7%, achieved for the photocell system with a perfect diode structure. Based on the detailed-balance model, the calculated theoretical efficiency limit for the system consisting of 5 single-junction photocells can be about 52.9% under 2.8 SUN (AM1.5G) radiation, implying that the ratio of the highest photovoltaic conversion efficiency for the ideal photodiode structure to the theoretical efficiency limit can reach about 80.7%. The results of this work will provide a way to further enhance the photovoltaic conversion efficiency for solar cell systems in future applications.
Assuntos
Desenho Assistido por Computador , Fontes de Energia Elétrica , Filtração/instrumentação , Modelos Teóricos , Energia Solar , Simulação por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Espalhamento de RadiaçãoRESUMO
A path-folded infrared image spectrometer with five sub-gratings and five linear-array detectors was applied to a broadband optical monitoring (BOM) system for thin film deposition. Through in situ BOM, we can simultaneously acquire the thickness and refractive index of each layer in real time by fitting the measured spectra, and modify the deposition parameters during deposition process according to the fitting results. An effective data processing method was proposed and applied in the BOM process, and it shortened the data processing time and improved the monitoring efficiency greatly. For demonstration, a narrow band-pass filter (NBF) at 1540 nm with ~10 nm full width at half-maximum (FWHM) had been manufactured using the developed BOM system, and the results showed that this BOM method was satisfying for monitoring deposition of thin film devices.
Assuntos
Manufaturas/efeitos da radiação , Membranas Artificiais , Refratometria/instrumentação , Espectrofotometria Infravermelho/estatística & dados numéricos , Raios InfravermelhosRESUMO
As the environmental considerations rise all over the world and under the drive of renewable energy policy, the society of hydrogen energy will come out gradually in the future. The proton exchange membrane water electrolyzer (PEMWE) is a very good hydrogen generator, characterized by low cost, high efficiency and zero emission of greenhouse gases. In this study, the micro temperature, humidity, flow, pressure, voltage, and current sensors were successfully integrated on a 50 µm thick Polyimide (PI) substrate by using micro-electro-mechanical systems (MEMS) technology. After the optimal design and process optimization of the flexible 6-in-1 microsensor, it was embedded in the PEMWE for a 500-h persistent effect test and internal real-time microscopic monitoring.
RESUMO
In recent years, various countries have been paying attention to environmental protection issues, believing that climate change is the main challenge to the developed countries' energy policies. The most discussed solution is renewable energy. The energy storage system can reduce the burden of the overall power system of renewable energy. The hydrogen energy is one of the optimal energy storage system options of renewable energy at present. According to these policies and the future trend, this study used micro-electro-mechanical systems (MEMS) technology to integrate micro voltage, current, temperature, humidity, flow and pressure sensors on a 50 µm thick polyimide (PI) substrate. After the optimization design and process optimization, the flexible six-in-one microsensor was embedded in the proton exchange membrane water electrolyzer (PEMWE) for internal real-time microscopic monitoring.
RESUMO
Unlike the single grating Czerny-Turner configuration spectrometers, a super-high spectral resolution optical spectrometer with zero coma aberration is first experimentally demonstrated by using a compound integrated diffraction grating module consisting of 44 high dispersion sub-gratings and a two-dimensional backside-illuminated charge-coupled device array photodetector. The demonstrated super-high resolution spectrometer gives 0.005 nm (5 pm) spectral resolution in ultra-violet range and 0.01 nm spectral resolution in the visible range, as well as a uniform efficiency of diffraction in a broad 200 nm to 1000 nm wavelength region. Our new zero-off-axis spectrometer configuration has the unique merit that enables it to be used for a wide range of spectral sensing and measurement applications.
RESUMO
Under the oblique incidence condition, the multiple reflection of wave packets in a layered film structure will have a lateral shift increasing with the film thickness. In the analysis of the spatial interference with consideration of the lateral shift effect, a set of new analytic formulae to normalize the intensity of the s-and p-polarized wave packet was obtained to reduce the error of the ellipsometry parameters significantly as the optical path difference delta is close to mpi. The principle and method developed in this work also can be applied to other film structures in more general applications.