RESUMO
A wearable sweat sensor, which could continuously monitor biomolecules related to the human physiological state, is emerging as a promising piece of health surveillance equipment. However, current sensors cannot simultaneously achieve a detection performance that equates to that of traditional sensors and satisfactory mechanical strength. Herein, a wearable sweat sensor with excellent detection performance and mechanical stability is designed and fabricated. Based on the integration of laser-induced graphene electrodes and a screen printing technique, this wearable sweat sensor could realize both the separate and simultaneous detection of uric acid (UA), tyrosine (Tyr), and ascorbic acid (AA) with high sensitivity. Good UA sensing performance in artificial sweat could be maintained even after 20 000 bends. In addition, the sensor can operate well in the wearing state or in a complex bovine whole blood sample. For the detection of human sweat, the changes in UA concentration after a purine-rich meal are continuously monitored and the results are in accordance with the corresponding serum UA detection results tested with a commercial serum UA meter. These results suggest its application potential in health monitoring for both gout patients and healthy humans.
Assuntos
Suor , Animais , Bovinos , Suor/química , Ácido Úrico/análise , Tirosina/análise , Ácido Ascórbico/análise , Humanos , Dispositivos Eletrônicos VestíveisRESUMO
Nanometals have been proven to be efficient thermocatalysts in the last decades. Their enhanced catalytic activity and tunable functionalities make them intriguing candidates for a wide range of catalytic applications, such as gaseous reactions and compound synthesis/decomposition. On the other hand, the enhanced specific surface energy and reactivity of nanometals can lead to configuration transformation and thus catalytic deactivation during the synthesis and catalysis, which largely undermines the activity and service time, thereby calling for urgent research effort to understand the deactivating mechanisms and develop efficient mitigating methods. Herein, the recent progress in understanding the configuration transformation-induced catalytic deactivation within nanometals is reviewed. The major pathways of configuration transformations, and their kinetics controlled by the environmental factors are presented. The approaches toward mitigating the transformation-induced deactivation are also presented. Finally, a perspective on the future academic approaches toward in-depth understanding of the kinetics of the deactivation of nanometals is proposed.
Assuntos
Catálise , CinéticaRESUMO
This report presents a simple and inexpensive fabrication approach to a flexible transparent composite film as a "cut-and-paste" surface-enhanced Raman scattering (SERS) substrate for in situ detection of organic pollutants. First, a self-assembled monolayer of Ag-nanocubes (Ag-NCs) is obtained at the air/water interface. Then, the Ag-NC monolayer is retrieved onto a flexible transparent polyethylene (PE) film to achieve an Ag-NC@PE composite film as a flexible SERS substrate. As the Ag-NCs in the monolayer are closely and uniformly packed on the PE film, the Ag-NC@PE composite film shows high SERS-activity with good signal homogeneity and reproducibility. Furthermore, the flexible transparent Ag-NC@PE composite film is "cut into" small pieces and directly "pasted" onto contaminated fruits for in situ SERS detection, as a result 10 nM thiram, 1 µM 4-polychlorinated biphenyl and 10 nM methyl parathion contaminants on oranges are detected, respectively. Therefore the Ag-NC@PE composite film is an inexpensive and effective SERS substrate for rapid in situ detection of organic pollutants in aqueous solutions, on fruits and other solid objects.
RESUMO
NiO-nanoflakes (NiO-NFs) grafted Ni-nanorod (Ni-NR) arrays stuck out of the porous anodic aluminum oxide (AAO) template are achieved by a combinatorial process of AAO-confined electrodeposition of Ni-NRs, selectively etching part of the AAO template to expose the Ni-NRs, wet-etching the exposed Ni-NRs in ammonia to obtain Ni(OH)2-NFs grafted onto the cone-shaped Ni-NRs, and annealing to transform Ni(OH)2-NFs in situ into NiO-NFs. By top-view sputtering, Ag-nanoparticles (Ag-NPs) are decorated on each NiO-NFs grafted Ni-NR (denoted as NiO-NFs@Ni-NR). The resultant Ag-NPs-decorated NiO-NFs@Ni-NR (denoted as Ag-NPs@NiO-NFs@Ni-NR) arrays exhibit not only strong surface-enhanced Raman scattering (SERS) activity but also reproducible SERS-signals over the whole array. It is demonstrated that the strong SERS-activity is mainly ascribed to the high density of sub-10 nm gaps (hot spots) between the neighboring Ag-NPs, the semiconducting NiO-NFs induced chemical enhancement effect, and the lightning rod effect of the cone-shaped Ni-NRs. The three-level hierarchical nanostructure arrays stuck out of the AAO template can be utilized to probe polychlorinated biphenyls (PCBs, a kind of global environmental hazard) with a concentration as low as 5 × 10(-6) M, showing promising potential in SERS-based rapid detection of organic environmental pollutants.
Assuntos
Óxido de Alumínio/química , Nanopartículas Metálicas/química , Nanotubos/química , Níquel/química , Prata/química , Nanotubos/ultraestrutura , Bifenilos Policlorados/análise , Porosidade , Rodaminas/química , Análise Espectral RamanRESUMO
Precise agriculture based on intelligent agriculture plays a significant role in sustainable development. The agricultural Internet of Things (IoTs) is a crucial foundation for intelligent agriculture. However, the development of agricultural IoTs has led to exponential growth in various sensors, posing a major challenge in achieving long-term stable power supply for these distributed sensors. Introducing a self-powered active biochemical sensor can help, but current sensors have poor sensitivity and specificity making this application challenging. To overcome this limitation, a triboelectric nanogenerator (TENG)-based self-powered active urea sensor which demonstrates high sensitivity and specificity is developed. This device achieves signal enhancement by introducing a volume effect to enhance the utilization of charges through a novel dual-electrode structure, and improves the specificity of urea detection by utilizing an enzyme-catalyzed reaction. The device is successfully used to monitor the variation of urea concentration during crop growth with concentrations as low as 4 µm, without being significantly affected by common fertilizers such as potassium chloride or ammonium dihydrogen phosphate. This is the first self-powered active biochemical sensor capable of highly specific and highly sensitive fertilizer detection, pointing toward a new direction for developing self-powered active biochemical sensor systems within sustainable development-oriented agricultural IoTs.
Assuntos
Agricultura , Técnicas Biossensoriais , Ureia , Agricultura/métodos , Agricultura/instrumentação , Técnicas Biossensoriais/métodos , Técnicas Biossensoriais/instrumentação , Nanotecnologia/métodos , Nanotecnologia/instrumentação , Fertilizantes/análise , Desenho de Equipamento , Fontes de Energia Elétrica , Internet das CoisasRESUMO
Soft on-skin electrodes play an important role in wearable technologies, requiring attributes such as wearing comfort, high conductivity, and gas permeability. However, conventional fabrication methods often compromise simplicity, cost-effectiveness, or mechanical resilience. In this study, a mechanically robust and gas-permeable on-skin electrode is presented that incorporates Flash Graphene (FG) integrated with a bioinspired armor design. FG, synthesized through Flash Joule Heating process, offers a small-sized and turbostratic arrangement that is ideal for the assembly of a conductive network with nanopore structures. Screen-printing is used to embed the FG assembly into the framework of polypropylene melt-blown nonwoven fabrics (PPMF), forming a soft on-skin electrode with low sheet resistance (125.2 ± 4.7 Ω/â¡) and high gas permeability (≈10.08 mg cmâ»2 h⻹). The "armor" framework ensures enduring mechanical stability through adhesion, washability, and 10,000 cycles of mechanical contact friction tests. Demonstrating capabilities in electrocardiogram (ECG) and electromyogram (EMG) monitoring, along with serving as a self-powered triboelectric sensor, the FG/PPMF electrode holds promise for scalable, high-performance flexible sensing applications, thereby enriching the landscape of integrated wearable technologies.
Assuntos
Eletrodos , Grafite , Dispositivos Eletrônicos Vestíveis , Grafite/química , Humanos , Desenho de Equipamento/métodos , Permeabilidade , Nanoporos , Eletrocardiografia/métodos , GasesRESUMO
With the popularization of the Internet of Things, the application of chemical sensors has become more and more extensive. However, it is difficult for a single functional sensor to meet multiple needs at the same time. For the next generation of chemical sensors, in addition to rapid qualitative and quantitative detection, it is also necessary to solve the problem of a distributed sensor power supply. Triboelectric nanogenerator (TENG) and surface-enhanced Raman scattering (SERS) are two emerging technologies that can be used for chemical testing. The combination of TENG and SERS technology is proposed to be an attractive research strategy to implement qualitative and quantitative analysis, as well as self-powered detection in one device. Herein, the Ag nanoparticle (NP)@polydimethylsiloxane (PDMS) plasmonic cavity is demonstrated, which can be exploited not only as a SERS substrate for qualitative analysis of the target molecules but also as a TENG based self-powered chemical sensor for rapid quantitative analysis. More importantly, the as-designed plasmonic cavity enables prolonged triboelectric field generated by the phenomena of triboelectricity, which in turn enhances the "hot spot" intensities from Ag NPs in the cavity and boosts the SERS signals. In this way, the device can have good feasibility and versatility for chemical detection. Specifically, the measurement of the concentration of many analytes can be successfully realized, including ions and small molecules. The results verify that the proposed sensor system has the potential for self-powered chemical sensors for environmental monitoring and analytical chemistry.
RESUMO
The rapid advances in the Internet of things and wearable devices have created a massive platform for sensor systems that detect chemical or biological agents. The accelerated development of these devices in recent years has simultaneously aggravated the power supply problems. Triboelectric nanogenerators (TENGs) represent a thriving renewable energy technology with the potential to revolutionize this field. In this review, the significance of TENG-based sensor systems in chemical or biological detection from the perspective of the development of power supply for biochemical sensors is discussed. Further, a range of TENGs are classified according to their roles as power supplies and/or self-powered active sensors. The TENG powered sensor systems are further discussed on the basis of their framework and applications. The working principles and structures of different TENG-based self-powered active sensors are presented, along with the classification of the sensors based on these factors. In addition, some representative applications are introduced, and the corresponding challenges are discussed. Finally, some perspectives for the future innovations of TENG-based sensor systems for chemical/biological detection are discussed.
Assuntos
Nanotecnologia , Fontes de Energia Elétrica , Dispositivos Eletrônicos VestíveisRESUMO
The timely biochemical detection of environmental pollutants or infectious disease is a predominant challenge for global health and people living in remote areas. However, the energy supply is still difficult for both the pretreatment and test steps, especially for diagnostics in resource-limited environments or outdoor point-of-care testing. Herein, we demonstrate a hand-powered triboelectric nanogenerator (TENG) system, which can simultaneously accomplish centrifugal pretreatment and analysis without an additional power supply. The complete separation of plasma from red blood cells can be achieved within 1.5 min at an operation frequency of 1 Hz. Besides, according to the impressive high rotational speed of 7500 rpm, the rotating mechanical energy can be efficiently recycled by the TENG to power different electronic devices, such as an electronic watch or thermometer. As a demonstration, the pretreatment of lake water and the detection of hydrogen peroxide contained in it has been realized. The combination of the system with different types of sensors will further promote its applications in multifarious biochemical detections. Moreover, this TENG system is effective, field-portable and ultra-low cost, and is promising for battery-free point-of-care diagnostic systems for outdoor or harsh environments.
RESUMO
The in situ growth of nanowires (NWs) into nano-/microelectromechanical systems (NEMS/MEMS) by solution processing is attractive for its relative simplicity and economic value. We present innovative, versatile microfabrication that produces multiple, heterogeneous semiconductor NWs. A crack photolithography-based micro-/nanofluidic platform has been developed. This platform offers the in situ solution growth of NWs while enabling the control of quantity, dimensions, orientation, alignment, position, and material. The generation of grain boundary (GB)-rich CH3NH3PbI3 NWs using the micro-/nanofluidic device is exemplary. High-quality single-crystal CH3NH3PbI3 NWs were derived by injection of a CH3NH3PbI3 solution. We produced a parallel NW array of CH3NH3PbI3 NW for visible light detection and ZnO NW for ultraviolet detection, thereby demonstrating an unprecedented broadband composite photodetector. The micro-/nanofluidic fabrication platform enables the production of multiple, heterogeneous semiconductor NW arrays on one substrate, offering the potential to elicit synergistic performance and functional enhancements from various NWs.
RESUMO
Most materials and devices with structurally switchable color features responsive to external stimuli can actively and flexibly display various colors. However, realizing covert-overt transformation behavior, especially switching between transparent and colored states, is more challenging. A composite laminate of soft poly(dimethylsiloxane) (PDMS) with a rigid SiO2 -nanoparticle (NP) structure pattern is developed as a multidimensional structural color platform. Owing to the similarity in the optical properties of PDMS and SiO2 NPs, this device is fully transparent in the normal state. However, as their mechanical strengths differ considerably, upon compressive loading, a buckling-type instability arises on the surface of the laminate, leading to the generation of 1D or 2D wrinkled patterns in the form of gratings. Finally, an application of the device in which quick response codes are displayed or hidden as covert-overt convertible colored patterns for optical encryption/decryption, showing their remarkable potential for anticounterfeiting applications, is demonstrated.
RESUMO
Various materials are fabricated to form specific structures/patterns at the micro-/nanoscale, which exhibit additional functions and performance. Recent liquid-mediated fabrication methods utilizing bottom-up approaches benefit from micro-/nanofluidic technologies that provide a high controllability for manipulating fluids containing various solutes, suspensions, and building blocks at the microscale and/or nanoscale. Here, the state-of-the-art micro-/nanofluidic approaches are discussed, which facilitate the liquid-mediated patterning of various hybrid-scale material structures, thereby showing many additional advantages in cost, labor, resolution, and throughput. Such systems are categorized here according to three representative forms defined by the degree of the free-fluid-fluid interface: free, semiconfined, and fully confined forms. The micro-/nanofluidic methods for each form are discussed, followed by recent examples of their applications. To close, the remaining issues and potential applications are summarized.
RESUMO
Liquid foam consists of liquid film networks. The films can be thinned to the nanoscale via evaporation and have potential in bottom-up material structuring applications. However, their use has been limited due to their dynamic fluidity, complex topological changes, and physical characteristics of the closed system. Here, we present a simple and versatile microfluidic approach for controlling two-dimensional liquid foam, designing not only evaporative microholes for directed drainage to generate desired film networks without topological changes for the first time, but also microposts to pin the generated films at set positions. Patterning materials in liquid is achievable using the thin films as nanoscale molds, which has additional potential through repeatable patterning on a substrate and combination with a lithographic technique. By enabling direct-writable multi-integrated patterning of various heterogeneous materials in two-dimensional or three-dimensional networked nanostructures, this technique provides novel means of nanofabrication superior to both lithographic and bottom-up state-of-the-art techniques.
RESUMO
Existing ionic artificial muscles still require a technology breakthrough for much faster response speed, higher bending strain, and longer durability. Here, we report an MXene artificial muscle based on ionically cross-linked Ti3C2T x with poly(3,4 ethylenedioxythiophene)-poly(styrenesulfonate), showing ultrafast rise time of within 1 s in DC responses, extremely large bending strain up to 1.37% in very low input voltage regime (0.1 to 1 V), long-term cyclic stability of 97% up to 18,000 cycles, markedly reduced phase delay, and very broad frequency bandwidth up to 20 Hz with good structural reliability without delamination under continuous electrical stimuli. These artificial muscles were successfully applied to make an origami-inspired narcissus flower robot as a wearable brooch and dancing butterflies and leaves on a tree as a kinetic art piece. These successful demonstrations elucidate the wide potential of MXene-based soft actuators for the next-generation soft robotic devices including wearable electronics and kinetic art pieces.
RESUMO
Growing interest in hybrid organic-inorganic lead halide perovskites has led to the development of various perovskite nanowires (NWs), which have potential use in a wide range of applications, including lasers, photodetectors, and light-emitting diodes (LEDs). However, existing nanofabrication approaches lack the ability to control the number, location, orientation, and properties of perovskite NWs. Their growth mechanism also remains elusive. Here, we demonstrate a micro/nanofluidic fabrication technique (MNFFT) enabling both precise control and in situ monitoring of the growth of perovskite NWs. The initial nucleation point and subsequent growth path of a methylammonium lead iodide-dimethylformamide (MAPbI3·DMF) NW array can be guided by a nanochannel. In situ UV-vis absorption spectra are measured in real time, permitting the study of the growth mechanism of the DMF-mediated crystallization of MAPbI3. As an example of an application of the MNFFT, we demonstrate a highly sensitive MAPbI3-NW-based photodetector on both solid and flexible substrates, showing the potential of the MNFFT for low-cost, large-scale, highly efficient, and flexible optoelectronic applications.
RESUMO
Nanowires (NWs) with a high surface-to-volume ratio are advantageous for bio- or chemical sensor applications with high sensitivity, high selectivity, rapid response, and low power consumption. However, NWs are typically fabricated by combining several nanofabrication and even microfabrication processes, resulting in drawbacks such as high fabrication cost, extensive labor, and long processing time. Here, we show a novel NW fabrication platform based on "crack-photolithography" to produce a micro-/nanofluidic channel network. Solutions were loaded along the microchannel, while chemical synthesis was performed in the nanoslit-like nanochannels for fabricating silver nanobelts (AgNBs). In addition, the NW/NB fabrication platform not only made it possible to produce AgNBs in a repeatable, high-throughput, and low-cost manner but also allowed the simultaneous synthesis and alignment of AgNBs on a chip, eliminating the need for special micro- and/or nanofabrication equipment and dramatically reducing the processing time, labor, and cost. Finally, we demonstrated that the AgNBs can be used as chemical sensors, either as prepared or when integrated in a flexible substrate, to detect target analytes such as hydrogen peroxide.
RESUMO
For surface-enhanced Raman scattering (SERS) sensors, one of the important issues is the development of substrates not only with high SERS-activity but also with strong ability to capture analytes. However, it is difficult to achieve the two goals simultaneously especially when detecting small molecules. Herein a compact battery-controlled nanostructure-assembled SERS system has been demonstrated for capture and detection of trace small molecule pollutants in water. In this SERS fluidic system, an electrical heating constantan wire covered with the vertically aligned ZnO nanotapers decorated with Ag-nanoparticles is inserted into a glass capillary. A mixture of thermo-responsive microgels, Au-nanorods colloids and analyte solution is then filled into the remnant space of the capillary. When the system is heated by switching on the battery, the thermo-responsive microgels shrink, which immobilizes the analyte and drives the Au-nanorod close to each other and close to the Ag-ZnO nanotapers. This process has also created high-density "hot spots" due to multi-type plasmonic couplings in three-dimensional space, amplifying the SERS signal. This integrated device has been successfully used to measure methyl parathion in lake water, showing a great potential in detection of aquatic pollutants.
RESUMO
We report on the large-scale synthesis of Ag-nanoparticle (Ag-NP) decorated ZnO-mesoporous-nanosheets (NSs) grafted on a flexible carbon fiber cloth (CFC), as sensitive and reproducible surface enhanced Raman scattering (SERS) substrates with excellent flexibility. The composite SERS-substrates are achieved by a combination of atomic layer deposition of ZnO-seeds on each fiber of the CFC (denoted as ZnO-seeds@CFC), chemical bath deposition and subsequent pyrolysis for the creation of ZnO-mesoporous-NSs grafted on ZnO-seeds@CFC, and ion-sputtering of Ag-NPs on the ZnO-mesoporous-NSs. As abundant SERS "hot spots" are generated from the electromagnetic coupling of the densely distributed Ag-NPs, and the semiconducting ZnO-mesoporous-NSs also have chemical supporting enhancement and distinct molecule adsorbing abilities, the composite SERS-substrates demonstrate high SERS-sensitivity with good signal reproducibility. As a trial for potential applications, the composite SERS-substrates were used to identify pesticides and highly toxic polychlorinated biphenyls (PCBs), and low concentrations down to 10(-7) M for methyl parathion and 5 × 10(-6) M for PCB-77 were reached, respectively, showing promising potential for the SERS-based rapid detection of toxic organic pollutants in the environment.