Solar anti-icing surface with enhanced condensate self-removing at extreme environmental conditions.

The inhibition of condensation freezing under extreme conditions (i.e., ultra-low temperature and high humidity) remains a daunting challenge in the field of anti-icing. As water vapor easily condensates or desublimates and melted water refreezes instantly, these cause significant performance decrease of most anti-icing surfaces at such extreme conditions. Herein, inspired by wheat leaves, an effective condensate self-removing solar anti-icing/frosting surface (CR-SAS) is fabricated using ultrafast pulsed laser deposition technology, which exhibits synergistic effects of enhanced condensate self-removal and efficient solar anti-icing. The superblack CR-SAS displays superior anti-reflection and photothermal conversion performance, benefiting from the light trapping effect in the micro/nano hierarchical structures and the thermoplasmonic effect of the iron oxide nanoparticles. Meanwhile, the CR-SAS displays superhydrophobicity to condensed water, which can be instantly shed off from the surface before freezing through self-propelled droplet jumping, thus leading to a continuously refreshed dry area available for sunlight absorption and photothermal conversion. Under one-sun illumination, the CR-SAS can be maintained ice free even under an ambient environment of -50 °C ultra-low temperature and extremely high humidity (ice supersaturation degree of ∼260). The excellent environmental versatility, mechanical durability, and material adaptability make CR-SAS a promising anti-icing candidate for broad practical applications even in harsh environments.

Bioinspired Color Switchable Photonic Crystal Silicone Elastomer Kirigami.

Bioinspired dynamic structural color has great potential for use in dynamic displays, sensors, cryptography, and camouflage. However, it is quite rare for artificial structural color devices to withstand thousands of cycles. Male hummingbird's crowns and gorgets are brightly colored, demonstrating frequent color switching that is induced by regulating the orientation of the feathers through movement of skin or joints. Inspired by this unique structural color modulation, we demonstrate a flexible, mechanically triggered color switchable sheet based on a photonic crystal (PhC)-coated polydimethylsiloxane (PDMS) kirigami (PhC-PDMS kirigami) made by laser cutting. Finite element modeling (FEM) simulation reveals that the thickness of PDMS kirigami and the chamfer at the incision induced by laser cutting both dominate the out-of-plane deformation through in-plane stretching. The bioinspired PhC-PDMS kirigami shows precisely programmable structural color and keeps the color very well after recycling over 10 000 times. This bioinspired PhC-PDMS kirigami also shows excellent viewability even in bright sunlight, high readability, robust functionality, technical flexibility, and mechanical durability, which are readily exploitable for applications, such as chromic mechanical monitors for the sports industry or for medical applications, wearable camouflage, and security systems.

Rationally designed surface microstructural features for enhanced droplet jumping and anti-frosting performance.

The accretion of frost on heat exchanging surfaces through the freezing of condensed water in cold and humid environments significantly reduces the operating efficiency of air-source heat pumps, refrigerators and other cryogenic equipment. The construction of hierarchical micro-nanostructured SHSs, with the ability to timely remove condensed water before freezing via self-propelled droplet jumping, serves as a promising anti-frosting strategy. However, the actual relationship between microstructural features and water removal capability through droplet jumping is still not clear, hindering the further optimization of anti-frosting SHSs. Herein, a series of aluminum SHSs with different micro-cone arrays is designed and fabricated via ultrafast laser processing and chemical etching. The effect of microstructural features on water removal capability is elucidated by statistically analyzing the condensation process. As compared to nanostructured SHSs with the micro-cone size ranging from 10 to 40 µm, the water removal through droplet jumping is remarkably enhanced from 3.42 g m-2 to as much as 13.91 g m-2 over 10 minutes of condensation experiments due to the effective transition of condensed microdroplets from the initial high-adhesion partial wetting (PW) state to low-adhesion Cassie state, leading to significantly reduced water accumulation and improved anti-frosting performance. However, a further increase in the micro-cone size decreased the water removal amount due to greater droplet adhesion to the surface, which results in higher chances for immobile coalescence and the formation of large droplets. Herein, by rationally tuning the size scale of the structured micro-cones, the optimal SHSs display the least water accumulation and render excellent frosting delay of over 90 minutes under simulated harsh operating conditions.

Self-powered, flexible and remote-controlled breath monitor based on TiO2 nanowire networks.

Smart breath monitor devices with high stretchability, fast response/recovery times and self-powered characteristic are essential in the wearable medical and life science applications. In this work, we report on the development of a versatile high-performance humidity sensor based on TiO2 nanowire networks for self-powered sensing application of human breath monitoring. These sensors, with typical response times of ∼3.6 s and recovery times of ∼14 s, exhibit high sensitivity to water vapor and can yield an output voltage that is directly proportional to the humidity level of ambient environment. The structure of nanowire networks is highly flexible and maintains the output voltage even after 10 000 times bending. By combining this type of sensor with a commercial signal transmission and processing system, it shows the good basis for real-time/remote-controlled monitoring and analysis of human breath under a variety of respiratory conditions. Our results suggest a new class of humidity sensing for self-powered biomedical devices and open to new technologies in energy, electronics, and sensor applications.

Investigation of impact and spreading of molten nanosized gold droplets on solid surfaces.

Understanding the impact dynamics and spreading of molten nanosized droplets on a solid surface is a crucial step towards the design and control of nano-fabrication in many novel applications of nanotechnology. In this context, molecular dynamic (MD) simulations have been conducted to compute temperature and dynamic contact angles of nano-droplets during impact. The evolution of the morphology of a molten metallic nano-droplet impacting on a substrate has been studied using a combination of experimental and simulation techniques. Femtosecond lasers have been used to transfer nanosized gold droplets. Droplet morphology calculated in MD simulations is found to be in good agreement with that seen in scanning electron microscopy (SEM) images. It is found that the spreading of nanoscale molten gold droplets upon impact is enhanced by increasing the droplet impact energy. As observed in experimental data, MD simulation results show that a high droplet-substrate heat transfer rate together with increased wettability of the substrate facilitates spreading and results in a thinner metal deposit after solidification.

Improving the electrical contact at a Pt/TiO2 nanowire interface by selective application of focused femtosecond laser irradiation.

In this paper, we show that tightly focused femtosecond laser irradiation is effective in improving nanojoining of an oxide nanowire (NW) (TiO2) to a metal electrode (Pt), and how this process can be used to modify contact states. Enhanced chemical bondings are created due to localized plasmonically enhanced optical absorption at the Pt/TiO2 interface as confirmed by finite element simulations of the localized field distribution during irradiation. Nano Auger electron spectroscopy shows that the resulting heterojunction is depleted in oxygen, suggesting that a TiO2-x layer is formed between the Pt electrode and the TiO2 NW. The presence of this redox layer at the metal/oxide interface plays an important role in decreasing the Schottky barrier height and in facilitating chemical bonding. After laser irradiation at the cathode for 10 s at a fluence of 5.02 mJ cm-2, the Pt/TiO2 NW/Pt structure displays different electrical properties under forward and reverse bias voltage, respectively. The creation of this asymmetric electrical characteristic shows the way in which modification of the electronic interface by laser engineering can replace the electroforming process in resistive switching devices and how it can be used to control contact states in a metal/oxide interface.

Investigation of splashing phenomena during the impact of molten sub-micron gold droplets on solid surfaces.

The dynamics of splashing accompanying the impact of molten 800 nm diameter gold droplets on silicon, gold coated silicon, gold coated glass and polished solid gold surfaces has been studied. A novel method based on laser induced forward transfer has been developed to generate single submicron molten gold droplets. Splashing morphology has been characterized using Scanning Electron Microscopy (SEM) and Focused Ion Beam (FIB) techniques. It is found that the splashing of submicron gold droplets upon impact is enhanced by high droplet impact energy achieved by reducing the droplet flight distance and that an air layer resulting in a bubble becomes trapped under the impacting droplets even when the size of the droplet is less than one micron. Our results show that, under these conditions, heat transfer between the submicron droplet and the solid substrate is more important than surface roughness and surface tension in the evolution of splashing. A theoretical model has been developed to simulate the splashing characteristics of submicron gold droplets during impact. Both the experimental data and the analytical model show that splashing is enhanced by high heat transfer rates to the surface.

In situ nanojoining of Y- and T-shaped silver nanowires structures using femtosecond laser radiation.

We report the in situ joining of spatially separated silver nanowires without additional filler material by controlled irradiation with femtosecond laser pulses. Nanojoining under these conditions arises from highly localized heat generation in the vicinity of the gap between adjacent silver nanowires. Melting, followed by the flow of silver into the gap, is optimized by adjusting the direction of laser polarization relative to gap geometry. Our results show that melting of silver occurs on both nanowires in the vicinity of the gap between the two components. Successful formation of a joint is found to be a function of the angle between the long axis of the nanowires and the gap distance. Finite element simulations show that the strong localized electric field generated by optical excitation determines the location and the morphology of the resulting bond. Light coupling and the resulting emission properties of these Y-shaped nanowire structures have been simulated and are compared to similar structures where the gap remains open. It is suggested that joined Y-shaped couplers will have a higher switching ratio between emitted nanowire ends than those occurring in open-gap structures. Nanojoining induced by localized heating under strong field excitation may enable the production of robust branched metal nanowire structures for optical applications.

Local modulation of Au/MoS2 Schottky barriers using a top ZnO nanowire gate for high-performance photodetection.

Schottky junctions are commonly used for fabricating heterojunction-based 2D transition metal dichalcogenide (TMD) photodetectors, characteristically offering a wide detection range, high sensitivity and fast response. However, these devices often suffer from reduced detectivity due to the high dark current, making it challenging to discover a simple and efficient universal way to improve the photoelectric performances. Here, we demonstrate a novel approach for integrating ZnO nanowire gates into a MoS2-Au Schottky junction to improve the photoelectric performances of photodetectors by locally controlling the Schottky barrier. This strategy remarkably reduces the dark current level of the device without affecting its photocurrent and the Schottky detectivity can be modified to a maximum detectivity of 1.4 × 1013 Jones with -20 V NG bias. This work provides potential possibilities for tuning the band structure of other materials and optimizing the performance of heterojunction photodetectors.

Locally Thinned, Core-Shell Nanowire-Integrated Multi-gate MoS2 Transistors for Active Control of Extendable Logic.

Field-effect transistor (FET) devices with multi-gate coupled structures usually exhibit special electrical properties and are suitable for fabricating multifunctional devices. Among them, the 1D nanowire gate configuration has become a promising gate design to tailor 2D FET performances. However, due to possible short circuiting induced by nanowire contact and the high requirement for precision manipulation, the integration of multi-nanowires as gates in a single 2D electronic system remains a grand challenge. Herein, local laser--thinned multiple core-shell SiC@SiO2 nanowires are successfully integrated into MoS2 transistors as multi-gates for active control of extendable logic applications. Nanowire gates (NGs) locally enhance the carrier transportation, and the use of multiple NGs can achieve designed band structures to tune the performance of the device. For core-shell structures, a semiconducting core is used to introduce a gate bias, and the insulating shell provides protection against short circuiting between NGs, facilitating nanowire assembly. Furthermore, a global control gate is introduced to co-tune the overall electrical characteristics, while active control of logic devices and extendable inputs are achieved based on this model. This work proposes a novel nanowire multi-gate configuration, which provides possibilities for localized, precise control of band structures and the fabrication of highly integrated, multifunctional, and controllable nano-devices.

Venation-Mimicking, Ultrastretchable, Room-Temperature-Attachable Metal Tapes for Integrated Electronic Skins.

Future electronic skin systems require stretchable conductors and low-temperature integration of external components, which remains challenging for traditional metal films. Herein, a bioinspired design concept is reported to endow metal films with 200% stretchability as well as room-temperature integration capability with diverse components. It is revealed that by controllable implantation of defects, distinctive venation-mimicking cracking modes can be induced in strained metal films, leading to profound stretchability regulation. An intriguing exponential-to-linear transition of the film electromechanical performance is observed, which is elucidated by a unified model covering the essence of all modes. Combined with room-temperature integration capability, an integrated electronic skin is constructed with metal films serving as stretchable electrodes, diverse sensors, and "tapes" to attach subcomponents, showing prospects in helping disabled people. This one-step, defect implantation strategy is applicable to common metals without special substrate treatments, which enables fascinating ultrastretchable metal film conductors with low-temperature integration capability to spark more sophisticated flexible electronic systems.

High performance 1D-2D CuO/MoS2 photodetectors enhanced by femtosecond laser-induced contact engineering.

The integration of 2D materials with other dimensional materials opens up rich possibilities for both fundamental physics and exotic nanodevices. However, current mixed-dimensional heterostructures often suffer from interfacial contact issues and environment-induced degradation, which severely limits their performance in electronics/optoelectronics. Herein, we demonstrate a novel BN-encapsulated CuO/MoS2 2D-1D van der Waals heterostructure photodetector with an ultrahigh photoresponsivity which is 10-fold higher than its previous 2D-1D counterparts. The interfacial contact state and photodetection capabilities of 2D-1D heterojunctions are significantly improved via femtosecond laser irradiation induced MoS2 wrapping and contamination removal. These h-BN protected devices show highly sensitive, gate-tunable and robust photoelectronic properties. By controlling the gate and bias voltages, the device can achieve a photoresponsivity as high as 2500 A W-1 in the forward bias mode, or achieve a high detectivity of 6.5 × 1011 Jones and a typical rise time of 2.5 ms at reverse bias. Moreover, h-BN encapsulation effectively protects the mixed-dimensional photodetector from electrical depletion by gas molecules such as O2 and H2O during fs laser treatment or the operation process, thus greatly improving the stability and service life in harsh environments. This work provides a new way for the further development of high performance, low cost, and robust mixed-dimensional heterostructure photodetectors by femtosecond laser contact engineering.

High-speed directional transport of condensate droplets on superhydrophobic saw-tooth surfaces.

HYPOTHESIS: Most droplets on high-efficiency condensing surfaces have radii of less than 100 µm, but conventional droplet transport methods (such as wettability-gradient surfaces and structural-curvature-gradient surfaces) that rely on the unbalanced force of three-phase lines can only transport millimeter-sized droplets efficiently. Regulating high-speed directional transport of condensate droplets is still challenging. Therefore, we present a method for condensate droplet transportation, based on the reaction force of the superhydrophobic saw-tooth surfaces to the liquid bridge, the condensate droplets could be transported at high speed and over long distances. EXPERIMENTS: The superhydrophobic saw-tooth surfaces are fabricated by femtosecond laser ablation and chemical etching. Condensation experiments and luminescent particle characterization experiments on different surfaces are conducted. Aided by the theoretical analysis, we illustrate the remarkable performance of condensate droplet transportation on saw-tooth surfaces. FINDINGS: Compared with conventional methods, our method improves the transport velocity and relative transport distance by 1-2 orders of magnitude and achieves directional transport of the smallest condensate droplet of about 2 µm. Furthermore, the superhydrophobic saw-tooth surfaces enable multi-hop directional jumping of condensate droplets, leading to cross-scale increases in transport distances from microns to decimeters.

Switching ultra-stretchability and sensitivity in metal films for electronic skins: a pufferfish-inspired, interlayer regulation strategy.

The booming development of electronic skins necessitates stretchable electrodes and flexible sensors that exhibit distinctly opposite requirements of electromechanical properties, both of which are difficult to be fulfilled on a single material. Here, a pufferfish-inspired, interlayer regulation strategy is proposed that realizes the above opposite properties in simple metal films, exhibiting either ultra-stretchability (295% strain) or sensitivity (maximum GF: ∼5500) on demand. It is revealed that the stretchability of the intrinsically strain-sensitive metal films can be improved by ∼20-fold via regulating the surface morphology of the inserted interlayer, accompanied by an intriguing transition in film cracking behavior from cut-through cracks to network patterns. By featuring these two antithetical but valuable properties, common metal films can be applied as diverse sensors and stretchable electrodes in electronic skins, showing application prospects in healthcare monitoring, human-machine interaction, and engineering services. Our proposed strategy substantially advances the application of metal film conductors in flexible electronics and broadens the horizons for developing more sophisticated electronic skins by interlayer engineering.

Artificial Intelligence Meets Flexible Sensors: Emerging Smart Flexible Sensing Systems Driven by Machine Learning and Artificial Synapses.

The recent wave of the artificial intelligence (AI) revolution has aroused unprecedented interest in the intelligentialize of human society. As an essential component that bridges the physical world and digital signals, flexible sensors are evolving from a single sensing element to a smarter system, which is capable of highly efficient acquisition, analysis, and even perception of vast, multifaceted data. While challenging from a manual perspective, the development of intelligent flexible sensing has been remarkably facilitated owing to the rapid advances of brain-inspired AI innovations from both the algorithm (machine learning) and the framework (artificial synapses) level. This review presents the recent progress of the emerging AI-driven, intelligent flexible sensing systems. The basic concept of machine learning and artificial synapses are introduced. The new enabling features induced by the fusion of AI and flexible sensing are comprehensively reviewed, which significantly advances the applications such as flexible sensory systems, soft/humanoid robotics, and human activity monitoring. As two of the most profound innovations in the twenty-first century, the deep incorporation of flexible sensing and AI technology holds tremendous potential for creating a smarter world for human beings.

Fabrication of Metallic Superhydrophobic Surfaces with Tunable Condensate Self-Removal Capability and Excellent Anti-Frosting Performance.

Laser fabrication of metallic superhydrophobic surfaces (SHSs) for anti-frosting has recently attracted considerable attention. Effective anti-frosting SHSs require the efficient removal of condensed microdroplets through self-propelled droplet jumping, which is strongly influenced by the surface morphology. However, detailed analyses of the condensate self-removal capability of laser-structured surfaces are limited, and guidelines for laser processing parameter control for fabricating rationally structured SHSs for anti-frosting have not yet been established. Herein, a series of nanostructured copper-zinc alloy SHSs are facilely constructed through ultrafast laser processing. The surface morphology can be properly tuned by adjusting the laser processing parameters. The relationship between the surface morphologies and condensate self-removal capability is investigated, and a guideline for laser processing parameterization for fabricating optimal anti-frosting SHSs is established. After 120 min of the frosting test, the optimized surface exhibits less than 70% frost coverage because the remarkably enhanced condensate self-removal capability reduces the water accumulation amount and frost propagation speed (<1 µm/s). Additionally, the material adaptability of the proposed technique is validated by extending this methodology to other metals and metal alloys. This study provides valuable and instructive insights into the design and optimization of metallic anti-frosting SHSs by ultrafast laser processing.

Femtosecond Laser Irradiation-Mediated MoS2-Metal Contact Engineering for High-Performance Field-Effect Transistors and Photodetectors.

2D materials exhibit intriguing electrical and optical properties, making them promising candidates for next-generation nanoelectronic devices. However, the high contact resistance of 2D materials to electrode material often limits the ultimate performance and potential of 2D materials and devices. In this work, we demonstrate a localized femtosecond (fs) laser irradiation process to substantially minimize the resistance of MoS2-metal contacts. A reduction of the contact resistance exceeding three orders of magnitude is achieved for mechanically exfoliated MoS2, which remarkably improves the overall FET performance. The underlying mechanisms of resistance reduction are the removal of organic contamination induced by the transfer process, as well as the lowering of Schottky barrier resistance (RSB) attributed to interface Fermi level pinning (FLP) by Au diffusion, and the lowering of interlayer resistance (Rint) due to interlayer coupling enhancement by Au intercalation under fs laser irradiation. By taking advantage of the improved MoS2-metal contact behavior, a high-performance MoS2 photodetector was developed with a photoresponsivity of 68.8 A W-1 at quite a low Vds of 0.5 V, which is ∼80 times higher than the pristine multilayer photodetector. This contamination-free, site-specific, and universal photonic fabrication technique provides an effective tool for the integration of complex 2D devices, and the mechanism of MoS2-metal interface modification reveals a new pathway to engineer the 2D material-metal interface.

Performance of Short Fiber Interlayered Reinforcement Thermoplastic Resin in Additive Manufacturing.

To further improve the mechanical properties of thermoplastic resin in additive manufacturing (AM), this paper presents a novel method to directly and quantitatively place the short fibers (SFs) between two printing process of resin layers. The printed composite parts with SFs between the layers was reinforced. The effects of single-layer fiber content, multi-layer fiber content and the length of fibers on the mechanical properties of printed specimens were studied. The distribution of fibers and quality of interlayer bonding were assessed using mechanical property testing and microstructure examination. The results showed that the tensile strength of the single-layered specimen with 0.5 wt% interlayered SFs increased by 18.82%. However, when the content of SFs continued to increase, the mechanical properties declined because of the increasing interlayered gap and the poor bonding quality. In addition, when the interlayered SFs length was 0.5-1 mm, the best reinforcement was obtained. To improve the interfacial bonding quality between the fiber and the resin, post-treatment and laser-assisted preheating printing was used. This method is effective for the enhancement of the interfacial bonding to obtain better mechanical properties. The research proves that adding SFs by placement can reduce the wear and breakage of the fibers compared to the conventional forming process. Therefore, the precise control of the length and content of SFs was realized in the specimen. In summary, SFs placement combined with post-treatment and laser-assisted preheating is a new method in AM to improve the performance of thermoplastic resin.

Nanoporous silver using pulsed laser deposition for high-performance oxygen reduction reaction and hydrogen peroxide sensing.

Silver (Ag)-based materials have shown great application potential in the oxygen reduction reaction (ORR) and hydrogen peroxide (H2O2) detection. The porous structures of Ag have attracted a lot of research interest due to their large specific surface area and high electrochemical activity. In this work, nanoporous Ag structures composed of nano-sized particles were prepared by a one-step pulsed laser deposition (PLD) under controlled background gas pressure. The porous PLD-Ag showed a high ORR performance (Eonset: 1.007 V vs. RHE, E1/2: 0.863 V vs. RHE), high sensitivity (613.1 µA cm-2 mM-1 at -0.2 V vs. SCE) and selectivity for H2O2 detection. The PLD technique provided a new, yet universal approach to producing high-performance, metal-based electrochemical electrodes.

Moisture-Enabled Electricity Generation: From Physics and Materials to Self-Powered Applications.

The exploration of the utilization of sustainable, green energy represents one way in which it is possible to ameliorate the growing threat of the global environmental issues and the crisis in energy. Moisture, which is ubiquitous on Earth, contains a vast reservoir of low-grade energy in the form of gaseous water molecules and water droplets. It has now been found that a number of functionalized materials can generate electricity directly from their interaction with moisture. This suggests that electrical energy can be harvested from atmospheric moisture and enables the creation of a new range of self-powered devices. Herein, the basic mechanisms of moisture-induced electricity generation are discussed, the recent advances in materials (including carbon nanoparticles, graphene materials, metal oxide nanomaterials, biofibers, and polymers) for harvesting electrical energy from moisture are summarized, and some strategies for improving energy conversion efficiency and output power in these devices are provided. The potential applications of moisture electrical generators in self-powered electronics, healthcare, security, information storage, artificial intelligence, and Internet-of-things are also discussed. Some remaining challenges are also considered, together with a number of suggestions for potential new developments of this emerging technology.