A Four-Coordinate End-On Superoxocopper(II) Complex: Probing the Link between Coordination Number and Reactivity.

Although the reactivity of five-coordinate end-on superoxocopper(II) complexes, CuII(η1-O2•-), is dominated by hydrogen atom transfer, the majority of four-coordinate CuII(η1-O2•-) complexes published thus far display nucleophilic reactivity. To investigate the origin of this difference, we have developed a four-coordinate end-on superoxocopper(II) complex supported by a sterically encumbered bis(2-pyridylmethyl)amine ligand, dpb2-MeBPA (1), and compared its substrate reactivity with that of a five-coordinate end-on superoxocopper(II) complex ligated by a similarly substituted tris(2-pyridylmethyl)amine, dpb3-TMPA (2). Kinetic isotope effect (KIE) measurements and correlation of second-order rate constants (k2's) versus oxidation potentials (Eox) for a range of phenols indicates that the complex [CuII(η1-O2•-)(1)]+ reacts with phenols via a similar hydrogen atom transfer (HAT) mechanism to [CuII(η1-O2•-)(2)]+. However, [CuII(η1-O2•-)(1)]+ performs HAT much more quickly, with its k2 for reaction with 2,6-di-tert-butyl-4-methoxyphenol (MeO-ArOH) being >100 times greater. Furthermore, [CuII(η1-O2•-)(1)]+ can oxidize C-H bond substrates possessing stronger bonds than [CuII(η1-O2•-)(2)]+ is able to, and it reacts with N-methyl-9,10-dihydroacridine (MeAcrH2) approximately 200 times faster. The much greater facility for substrate oxidation displayed by [CuII(η1-O2•-)(1)]+ is attributed to it possessing higher inherent electrophilicity than [CuII(η1-O2•-)(2)]+, which is a direct consequence of its lower coordination number. These observations are of relevance to enzymes in which four-coordinate end-on superoxocopper(II) intermediates, rather than their five-coordinate congeners, are routinely invoked as the active oxidants responsible for substrate oxidation.

Molybdenum(VI) Nitrido Complexes with Tripodal Silanolate Ligands. Structure and Electronic Character of an Unsymmetrical Dimolybdenum µ-Nitrido Complex Formed by Incomplete Nitrogen Atom Transfer.

In contrast to a tungsten nitrido complex endowed with a tripodal silanolate ligand framework, which was reported in the literature to be a dimeric species with a metallacyclic core, the corresponding molybdenum nitrides 3 are monomeric entities comprising a regular terminal nitride unit, as proven by single-crystal X-ray diffraction (SC-XRD). Their electronic character is largely determined by the constraints imposed on the metal center by the podand ligand architecture. 95Mo nuclear magnetic resonance (NMR) and, to a lesser extent, 14N NMR spectroscopy allow these effects to be studied, which become particularly apparent upon comparison with the spectral data of related molybdenum nitrides comprising unrestrained silanolate, alkoxide, or amide ligands. Attempted nitrogen atom transfer from these novel terminal nitrides to [(tBuArN)3Mo] (Ar = 3,5-dimethylphenyl) as the potential acceptor stopped at the stage of unsymmetric dimolybdenum µ-nitrido complex 13a as the first intermediate along the reaction pathway. SC-XRD, NMR, electron paramagnetic resonance, and ultraviolet-visible spectroscopy as well as magnetometry in combination with density functional theory allowed a clear picture of the geometric and electronic structure of this mixed-valent species to be drawn. 13a is formally best described as an adduct of the type [(Mo[O])+III-(µN)-III-(Mo[N])+VI], S = 1/2 complex with (Mo[O])+III in the low-spin configuration, whereas related complexes such as [(AdS)3Mo-(µN)-Mo(NtBuAr)3] (19; Ad = 1-adamantyl) have previously been regarded in the literature as mixed-valent Mo+IV/Mo+V species. The spin population at the two Mo centers is uneven and notably larger at the more reduced Mo[O] atom, whereas the only spin present at the (µN) bridge is derived from spin polarization.

Palladium-catalysed electrophilic aromatic C-H fluorination.

Aryl fluorides are widely used in the pharmaceutical and agrochemical industries, and recent advances have enabled their synthesis through the conversion of various functional groups. However, there is a lack of general methods for direct aromatic carbon-hydrogen (C-H) fluorination. Conventional methods require the use of either strong fluorinating reagents, which are often unselective and difficult to handle, such as elemental fluorine, or less reactive reagents that attack only the most activated arenes, which reduces the substrate scope. A method for the direct fluorination of aromatic C-H bonds could facilitate access to fluorinated derivatives of functional molecules that would otherwise be difficult to produce. For example, drug candidates with improved properties, such as increased metabolic stability or better blood-brain-barrier penetration, may become available. Here we describe an approach to catalysis and the resulting development of an undirected, palladium-catalysed method for aromatic C-H fluorination using mild electrophilic fluorinating reagents. The reaction involves a mode of catalysis that is unusual in aromatic C-H functionalization because no organometallic intermediate is formed; instead, a reactive transition-metal-fluoride electrophile is generated catalytically for the fluorination of arenes that do not otherwise react with mild fluorinating reagents. The scope and functional-group tolerance of this reaction could provide access to functional fluorinated molecules in pharmaceutical and agrochemical development that would otherwise not be readily accessible.

Synthesis and Reactivity of a Cobalt-Supported Singlet Nitrene.

The synthesis, characterization, and reactivity of a series of cobalt terminal imido complexes supported by an N-anchored tripodal tris(carbene) chelate is described, including a Co-supported singlet nitrene. Reaction of the CoI precursor [(TIMMNmes)CoI](PF6) (TIMMNmes = tris-[2-(3-mesityl-imidazolin-2-ylidene)-methyl]amine) with p-methoxyphenyl azide yields a CoIII imide [(TIMMNmes)CoIII(NAnisole)](PF6) (1). Treatment of 1 with 1 equiv of [FeCp2](PF6) at -35 °C affords a formal CoIV imido complex [(TIMMNmes)Co(NAnisole)](PF6)2 (2), which features a bent Co-N(imido)-C(Anisole) linkage. Subsequent one-electron oxidation of 2 with 1 equiv of AgPF6 provides access to the tricationic cobalt imido complex [(TIMMNmes)Co(NAnisole)](PF6)3 (3). All complexes were fully characterized, including single-crystal X-ray diffraction (SC-XRD) analyses, infrared (IR) vibrational, ultraviolet/visible (UV/vis) electronic absorption, multinuclear NMR, X-band electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR), and high-energy-resolution fluorescence-detected X-ray absorption spectroscopy (HERFD XAS). Quantum chemical calculations provide additional insight into the electronic structures of all compounds. The dicationic CoIV imido complex 2 exhibits a doublet ground state with considerable imidyl character as a result of covalent Co-NAnisole bonding. At room temperature, 2 readily converts to a CoII amine complex involving intramolecular C-H bond amination. Electronically, tricationic complex 3 can be understood as a singlet nitrene bound to CoIII with significant CoIV imidyl radical character. Verifying the pronounced electrophilicity, nucleophiles such as H2O and tBuNH2 add to 3─analogous to the parent free nitrene─in the para position of the aromatic substituent, thus, clearly corroborating singlet nitrene-type reactivity.

Reactivities and Electronic Structures of µ-1,2-Peroxo and µ-1,2-Superoxo CoIIICoIII Complexes: Electrophilic Reactivity and O2 Release Induced by Oxidation.

Peroxo complexes are key intermediates in water oxidation catalysis (WOC). Cobalt plays an important role in WOC, either as oxides CoOx or as {CoIII(µ-1,2-peroxo)CoIII} complexes, which are the oldest peroxo complexes known. The oxidation of {CoIII(µ-1,2-peroxo)CoIII} complexes had usually been described to form {CoIII(µ-1,2-superoxo)CoIII} complexes; however, recently the formation of {CoIV(µ-1,2-peroxo)CoIII} species were suggested. Using a bis(tetradentate) dinucleating ligand, we present here the synthesis and characterization of {CoIII(µ-1,2-peroxo)(µ-OH)CoIII} and {CoIII(µ-OH)2CoIII} complexes. Oxidation of {CoIII(µ-1,2-peroxo)(µ-OH)CoIII} at -40 °C in CH3CN provides the stable {CoIII(µ-1,2-superoxo)(µ-OH)CoIII} species and activates electrophilic reactivity. Moreover, {CoIII(µ-1,2-peroxo)(µ-OH)CoIII} catalyzes water oxidation, not molecularly but rather via CoOx films. While {CoIII(µ-1,2-peroxo)(µ-OH)CoIII} can be reversibly deprotonated with DBU at -40 °C in CH3CN, {CoIII(µ-1,2-superoxo)(µ-OH)CoIII} undergoes irreversible conversions upon reaction with bases to a new intermediate that is also the decay product of {CoIII(µ-1,2-superoxo)(µ-OH)CoIII} in aqueous solution at pH > 2. Based on a combination of experimental methods, the new intermediate is proposed to have a {CoII(µ-OH)CoIII} core formed by the release of O2 from {CoIII(µ-1,2-superoxo)(µ-OH)CoIII} confirmed by a 100% yield of O2 upon photocatalytic oxidation of {CoIII(µ-1,2-peroxo)(µ-OH)CoIII}. This release of O2 by oxidation of a peroxo intermediate corresponds to the last step in molecular WOC.

Crystalline Anions Based on Classical N-Heterocyclic Carbenes.

Herein, the first stable anions K[SIPrBp ] (4 a-K) and K[IPrBp ] (4 b-K) (SIPrBp =BpC{N(Dipp)CH2 }2 , IPrBp =BpC{N(Dipp)CH}2 ; Bp=4-PhC6 H4 ; Dipp=2,6-iPr2 C6 H3 ) derived from classical N-heterocyclic carbenes (NHCs) (i.e. SIPr and IPr) have been isolated as violet crystalline solids. 4 a-K and 4 b-K are prepared by KC8 reduction of the neutral radicals [SIPrBp ] (3 a) and [IPrBp ] (3 b), respectively. The radicals 3 a and 3 b as well as [Me-IPrBp ] 3 c (Me-IPrBp =BpC{N(Dipp)CMe}2 ) are accessible as crystalline solids on treatment of the respective 1,3-imidazoli(ni)um bromides (SIPrBp )Br (2 a), (IPrBp )Br (2 b), and (Me-IPrBp )Br (2 c) with KC8 . The cyclic voltammograms of 2 a-2 c exhibit two one-electron reversible redox processes in -0.5 to -2.5 V region that correspond to the radicals 3 a-3 c and the anions (4 a-4 c)- . Computational calculations suggest a closed-shell singlet ground state for (4 a-4 c)- with the singlet-triplet energy gap of 17-24 kcal mol-1 .

A Combined Spectroscopic and Computational Study on the Mechanism of Iron-Catalyzed Aminofunctionalization of Olefins Using Hydroxylamine Derived N-O Reagent as the "Amino" Source and "Oxidant".

Herein, we study the mechanism of iron-catalyzed direct synthesis of unprotected aminoethers from olefins by a hydroxyl amine derived reagent using a wide range of analytical and spectroscopic techniques (Mössbauer, Electron Paramagnetic Resonance, Ultra-Violet Visible Spectroscopy, X-ray Absorption, Nuclear Resonance Vibrational Spectroscopy, and resonance Raman) along with high-level quantum chemical calculations. The hydroxyl amine derived triflic acid salt acts as the "oxidant" as well as "amino" group donor. It activates the high-spin Fe(II) (St = 2) catalyst [Fe(acac)2(H2O)2] (1) to generate a high-spin (St = 5/2) intermediate (Int I), which decays to a second intermediate (Int II) with St = 2. The analysis of spectroscopic and computational data leads to the formulation of Int I as [Fe(III)(acac)2-N-acyloxy] (an alkyl-peroxo-Fe(III) analogue). Furthermore, Int II is formed by N-O bond homolysis. However, it does not generate a high-valent Fe(IV)(NH) species (a Fe(IV)(O) analogue), but instead a high-spin Fe(III) center which is strongly antiferromagnetically coupled (J = -524 cm-1) to an iminyl radical, [Fe(III)(acac)2-NH·], giving St = 2. Though Fe(NH) complexes as isoelectronic surrogates to Fe(O) functionalities are known, detection of a high-spin Fe(III)-N-acyloxy intermediate (Int I), which undergoes N-O bond cleavage to generate the active iron-nitrogen intermediate (Int II), is unprecedented. Relative to Fe(IV)(O) centers, Int II features a weak elongated Fe-N bond which, together with the unpaired electron density along the Fe-N bond vector, helps to rationalize its propensity for N-transfer reactions onto styrenyl olefins, resulting in the overall formation of aminoethers. This study thus demonstrates the potential of utilizing the iron-coordinated nitrogen-centered radicals as powerful reactive intermediates in catalysis.

Umpolung in a Pair of Cobalt(III) Terminal Imido/Imidyl Complexes.

Reaction of the CoI complex [(TIMMNmes )CoI ](PF6 ) (1) (TIMMNmes =tris-[2-(3-mesityl-imidazolin-2-ylidene)-methyl]amine) with mesityl azide yields the CoIII imide [(TIMMNmes )CoIII (NMes)](PF6 ) (2). Oxidation of 2 with [FeCp2 ](PF6 ) provides access to a rare CoIII imidyl [(TIMMNmes )Co(NMes)](PF6 )2 (3). Single-crystal X-ray diffractometry and EPR spectroscopy confirm the molecular structure of 3 and its S= 1 / 2 ground state. ENDOR, X-ray absorption spectroscopy and computational analyses indicate a ligand-based oxidation; thus, an imidyl-radical electronic structure for 3. Migratory insertion of one ancillary NHC to the imido ligand in 2 gives the CoI N-heterocyclic imine (4) within 12 h. Conversely, it takes merely 0.5 h for 3 to transform to the CoII congener (5). The migratory insertion in 2 occurs via a nucleophilic attack of the imido ligand at the NHC to give 4, whereas in 3, a nucleophilic attack of the NHC at the electrophilic imidyl ligand yields 5. The reactivity shunt upon oxidation of 2 to 3 confirms an umpolung of the imido ligand.

Productive Alkyne Metathesis with "Canopy Catalysts" Mandates Pseudorotation.

Molybdenum alkylidyne complexes of the "canopy catalyst" series define new standards in the field of alkyne metathesis. The tripodal ligand framework lowers the symmetry of the metallacyclobutadiene complex formed by [2 + 2] cycloaddition with the substrate and imposes constraints onto the productive [2 + 2] cycloreversion; pseudorotation corrects this handicap and makes catalytic turnover possible. A combined spectroscopic, crystallographic, and computational study provides insights into this unorthodox mechanism and uncovers the role that metallatetrahedrane complexes play in certain cases.

Sterically Stabilized End-On Superoxocopper(II) Complexes and Mechanistic Insights into Their Reactivity with O-H, N-H, and C-H Substrates.

Instability of end-on superoxocopper(II) complexes, with respect to conversion to peroxo-bridged dicopper(II) complexes, has largely constrained their study to very low temperatures. This limits their kinetic capacity to oxidize substrates. In response, we have developed a series of bulky ligands, Ar3-TMPA (Ar = tpb, dpb, dtbpb), and used them to support copper(I) complexes that react with O2 to yield [CuII(η1-O2•-)(Ar3-TMPA)]+ species, which are stable against dimerization at all temperatures. Binding of O2 saturates at subambient temperatures and can be reversed by warming. The onset of oxygenation for the Ar = tpb and dpb systems is observed at 25 °C, and all three [CuII(η1-O2•-)(Ar3-TMPA)]+ complexes are stable against self-decay at temperatures of ≤-20 °C. This provides a wide temperature window for study of these complexes, which was exploited by performing extensive reaction kinetics measurements for [CuII(η1-O2•-)(tpb3-TMPA)]+ using a broad range of O-H, N-H, and C-H bond substrates. This includes correlation of second order rate constants (k2) versus oxidation potentials (Eox) for a range of phenols, construction of Eyring plots, and temperature-dependent kinetic isotope effect (KIE) measurements. The data obtained indicate that reaction with all substrates proceeds via H atom transfer (HAT), reaction with the phenols proceeds with significant charge transfer, and full tunneling of both H and D atoms occurs in the case of 1,2-diphenylhydrazine and 4-methoxy-2,6-di-tert-butylphenol. Oxidation of C-H bonds proved to be kinetically challenging, and whereas [CuII(η1-O2•-)(tpb3-TMPA)]+ can oxidize moderately strong O-H and N-H bonds, it is only able to oxidize very weak C-H bonds.

Metalloradical Cations and Dications Based on Divinyldiphosphene and Divinyldiarsene Ligands.

Metalloradicals are key species in synthesis, catalysis, and bioinorganic chemistry. Herein, two iron radical cation complexes (3-E)GaCl4 [(3-E).+ = [{(IPr)C(Ph)E}2 Fe(CO)3 ].+ , E = P or As; IPr = C{(NDipp)CH}2 , Dipp = 2,6-iPr2 C6 H3 ] are reported as crystalline solids. Treatment of the divinyldipnictenes {(IPr)C(Ph)E}2 (1-E) with Fe2 (CO)9 affords [{(IPr)C(Ph)E}2 Fe(CO)3 ] (2-E), in which 1-E binds to the Fe atom in an allylic (η3 -EECvinyl ) fashion and functions as a 4e donor ligand. Complexes 2-E undergo 1e oxidation with GaCl3 to yield (3-E)GaCl4 . Spin density analysis revealed that the unpaired electron in (3-E).+ is mainly located on the Fe (52-64 %) and vinylic C (30-36 %) atoms. Further 1e oxidation of (3-E)GaCl4 leads to unprecedented η3 -EECvinyl to η3 -ECvinyl CPh coordination shuttling to form the dications (4-E)(GaCl4 )2 .

Converged Structural and Spectroscopic Properties for Refined QM/MM Models of Azurin.

Blue copper proteins continue to challenge experiment and theory with their electronic structure and spectroscopic properties that respond sensitively to the coordination environment of the copper ion. In this work, we report state-of-the art electronic structure studies for geometric and spectroscopic properties of the archetypal "Type I" copper protein azurin in its Cu(II) state. A hybrid quantum mechanics/molecular mechanics (QM/MM) approach is used, employing both density functional theory (DFT) and coupled cluster with singles, doubles, and perturbative triples (CCSD(T)) methods for the QM region, the latter method making use of the domain-based local pair natural orbital (DLPNO) approach. Models of increasing QM size are employed to investigate the convergence of critical geometric parameters. It is shown that convergence is slow and that a large QM region is critical for reproducing the short experimental Cu-SCys112 distance. The study of structural convergence is followed by investigation of spectroscopic parameters using both DFT and DLPNO-CC methods and comparing these to the experimental spectrum using simulations. The results allow us to examine for the first time the distribution of spin densities and hyperfine coupling constants at the coupled cluster level, leading us to revisit the experimental assignment of the 33S hyperfine splitting. The wavefunction-based approach to obtain spin-dependent properties of open-shell systems demonstrated here for the case of azurin is transferable and applicable to a large array of bioinorganic systems.

Isolation of a Homoleptic Non-oxo Mo(V) Alkoxide Complex: Synthesis, Structure, and Electronic Properties of Penta-tert-Butoxymolybdenum.

Treatment of [MoCl4(THF)2] with MOtBu (M = Na, Li) does not result in simple metathetic ligand exchange but entails disproportionation with formation of the well-known dinuclear complex [(tBuO)3Mo≡Mo(OtBu)3] and a new paramagnetic compound, [Mo(OtBu)5]. This particular five-coordinate species is the first monomeric, homoleptic, all-oxygen-ligated but non-oxo 4d1 Mo(V) complex known to date; as such, it proves that the dominance of the Mo═O group over (high-valent) molybdenum chemistry can be challenged. [Mo(OtBu)5] was characterized in detail by a combined experimental/computational approach using X-ray diffraction; UV/vis, MCD, IR, EPR, and NMR spectroscopy; and quantum chemistry. The recorded data confirm a Jahn-Teller distortion of the structure, as befitting a d1 species, and show that the complex undergoes Berry pseudorotation. The alkoxide ligands render the disproportionation reaction, leading the formation of [Mo(OtBu)5] to be particularly facile, even though the parent complex [MoCl4(THF)2] itself was also found to be intrinsically unstable; remarkably, this substrate converts into a crystalline material, in which the newly formed Mo(III) and Mo(V) products cohabitate the same unit cell.

A Manganese(IV)-Hydroperoxo Intermediate Generated by Protonation of the Corresponding Manganese(III)-Superoxo Complex.

Earlier work revealed that metal-superoxo species primarily function as radicals and/or electrophiles. Herein, we present ambiphilicity of a MnIII-superoxo complex revealed by its proton- and metal-coupled electron-transfer processes. Specifically, a MnIV-hydroperoxo intermediate, [Mn(BDPBrP)(OOH)]+ (1, H2BDPBrP = 2,6-bis((2-(S)-di(4-bromo)phenylhydroxylmethyl-1-pyrrolidinyl)methyl)pyridine) was generated by treatment of a MnIII-superoxo complex, Mn(BDPBrP)(O2•) (2) with trifluoroacetic acid at -120 °C. Detailed insights into the electronic structure of 1 are obtained using resonance Raman and multi-frequency electron paramagnetic resonance spectroscopies coupled with density functional theory calculations. Similarly, the reaction of 2 with scandium(III) triflate was shown to give a Mn(IV)/Sc(III) bridging peroxo species, [Mn(BDPBrP)(OO)Sc(OTf)n](3-n)+ (4). Furthermore, it is found that deprotonation of 1 quantitatively regenerates 2, and that one-electron oxidation of the corresponding MnIII-hydroperoxo species, Mn(BDPBrP)(OOH) (3), also yields 1.

Where Is the Fluoro Wall?: A Quantum Chemical Investigation.

Despite their isoelectronic properties, fluoro and oxo ligands exhibit completely different chemical behavior. Formally speaking, the first is known to exclusively form single bonds, while the latter is generally observed to form double (or even triple) bonds. The biggest difference, however, lies in what is known among inorganic chemists as the Oxo Wall: the fact that six-coordinate tetragonal transition metal oxo complexes are not observed beyond group 7 elements. While the Oxo Wall was explained a few decades ago, some questions regarding the nature of the Oxo Wall remain unanswered. For example, why do group 8 oxo complexes with high oxidation states not violate the Oxo Wall? Moreover, why are transition metal fluoro complexes observed through the whole transition metal series? In order to understand how the small difference between these two isoelectronic ligands can give rise to such different chemical behaviors, we conducted an extensive computational analysis of the geometric and electronic properties of model fluoro and oxo complexes with metals around the Oxo Wall. Among many insights into the details of the Oxo Wall, we mostly learned that the oxygen 2p orbitals are prone to meaningfully interact with transition metal d orbitals, because they match not only spatially but also energetically, while for fluorine the p orbital energies are lower to an extent that interaction with transition metal d orbitals is much reduced. This in turn implies that in those instances where the metal d orbitals principally accessible for interaction are occupied, the oxygen 2p orbitals are too exposed to be stable.

Spectroscopic and Quantum Chemical Investigation of Benzene-1,2-dithiolate-Coordinated Diiron Complexes with Relevance to Dinitrogen Activation.

In this work, a benzene-1,2-dithiolate (bdt) pentamethylcyclopentadienyl di-iron complex [Cp*Fe(µ-η2:η4-bdt)FeCp*] and its [Cp*Fe(bdt)(X)FeCp*] analogues (where X = N2H2, N2H3-, H-, NH2-, NHCH3-, or NO+) were investigated through spectroscopic and computational studies. These complexes are of relevance as model systems for dinitrogen activation in nitrogenase and share with its active site the presence of iron, sulfur ligands, and a very flexible electronic structure. On the basis of a combination of X-ray emission spectroscopy (XES), X-ray crystallography, Mössbauer, NMR, and EPR spectroscopy, the geometric and electronic structure of the series has been experimentally elucidated. All iron atoms were found to be in a local low-spin configuration. When no additional X ligand is bound, the bdt ligand is tilted and features a stabilizing π-interaction with one of the iron atoms. The number of lone-pair orbitals provided by the nitrogen-containing species is crucial to the overall electronic structure. When only one lone-pair is present and the iron atoms are bridged by one atom, a three-center bond occurs, and a direct Fe-Fe bond is absent. If the bridging atom provides two lone-pairs, then an Fe-Fe bond is formed. A recurring theme for all ligands is σ-donation into the unoccupied eg manifolds of both iron atoms and back-donation from the t2g manifolds into the ligand π* orbitals. The latter results in a weakening of the double bond of the bound ligand, and in the case of NO+, it results in a weakening of all bonds that comprise triple bond. The electron-rich thiolates further amplify this effect and can also serve as bases for proton binding. While the above observations have been made for the studied di-iron complexes, they may be of relevance for the active site in nitrogenase, where a similar N2 binding mode may occur allowing for the simultaneous weakening of the N2 σ bond and π bonds.

Mononuclear Manganese(III) Superoxo Complexes: Synthesis, Characterization, and Reactivity.

Metal-superoxo species are typically proposed as key intermediates in the catalytic cycle of dioxygen activation by metalloenzymes involving different transition metal cofactors. In this regard, while a series of Fe-, Co-, and Ni-superoxo complexes have been reported to date, well-defined Mn-superoxo complexes remain rather rare. Herein, we report two mononuclear MnIII-superoxo species, Mn(BDPP)(O2•-) (2, H2BDPP = 2,6-bis((2-(S)-diphenylhydroxylmethyl-1-pyrrolidinyl)methyl)pyridine) and Mn(BDPBrP)(O2•-) (2', H2BDPBrP = 2,6-bis((2-(S)-di(4-bromo)phenylhydroxyl-methyl-1-pyrrolidinyl)methyl)pyridine), synthesized by bubbling O2 into solutions of their MnII precursors, Mn(BDPP) (1) and Mn(BDPBrP) (1'), at -80 °C. A combined spectroscopic (resonance Raman and electron paramagnetic resonance (EPR) spectroscopy) and computational study evidence that both complexes contain a high-spin MnIII center (SMn = 2) antiferromagnetically coupled to a superoxo radical ligand (SOO• = 1/2), yielding an overall S = 3/2 ground state. Complexes 2 and 2' were shown to be capable of abstracting a H atom from 2,2,6,6-tetramethyl-1-hydroxypiperidine (TEMPO-H) to form MnIII-hydroperoxo species, Mn(BDPP)(OOH) (5) and Mn(BDPBrP)(OOH) (5'). Complexes 5 and 5' can be independently prepared by the reactions of the isolated MnIII-aqua complexes, [Mn(BDPP)(H2O)]OTf (6) and [Mn(BDPBrP)(H2O)]OTf (6'), with H2O2 in the presence of NEt3. The parallel-mode EPR measurements established a high-spin S = 2 ground state for 5 and 5'.

Crystalline Divinyldiarsene Radical Cations and Dications.

The divinyldiarsene radical cations [{(NHC)C(Ph)}As]2 (GaCl4 ) (NHC=IPr: C{(NDipp)CH}2 3; SIPr: C{(NDipp)CH2 }2 4; Dipp=2,6-iPr2 C6 H3 ) and dications [{(NHC)C(Ph)}As]2 (GaCl4 )2 (NHC=IPr 5; SIPr 6) are readily accessible as crystalline solids on sequential one-electron oxidation of the corresponding divinyldiarsenes [{(NHC)C(Ph)}As]2 (NHC=IPr 1; SIPr 2) with GaCl3 . Compounds 3-6 have been characterized by X-ray diffraction, cyclic voltammetry, EPR/NMR spectroscopy, and UV/vis absorption spectroscopy as well as DFT calculations. The sequential removal of one electron from the HOMO, that is mainly the As-As π-bond, of 1 and 2 leads to successive elongation of the As=As bond and contraction of the C-As bonds from 1/2→3/4→5/6. The UV/vis spectrum of 3 and 4 each exhibits a strong absorption in the visible region associated with SOMO-related transitions. The EPR spectrum of 3 and 4 each shows a broadened septet owing to coupling of the unpaired electron with two 75 As (I=3/2) nuclei.

Enhanced Electrophilicity of Heterobimetallic Bi-Rh Paddlewheel Carbene Complexes: A Combined Experimental, Spectroscopic, and Computational Study.

Dirhodium paddlewheel complexes are indispensable tools in modern organometallic catalysis for the controlled decomposition of diazo-compounds. Tuning the reactivity of the thus-formed transient carbenes remains an active and dynamic field of research. Herein, we present our findings that the distal metal center plays an as yet underappreciated role in modulating this reactivity. Replacement of one rhodium atom in the bimetallic core for bismuth results in the formation of a significantly more electrophilic carbene complex. Bismuth-rhodium catalysts thereby facilitate previously unknown modes of reactivity for α-diazoester compounds, including the cyclopropanation of alkenes as electron deficient as trichloroethylene. While dirhodium paddlewheel complexes remain the catalysts of choice for many carbene-mediated transformations, their bismuth-rhodium analogues exhibit complementary reactivity and show great potential for small molecule and solvent activation chemistry. DFT calculations highlight the importance of metal-metal bonding interactions in controlling carbene electrophilicity. The paucity of these interactions between the 4d orbitals of rhodium and the 6p orbitals of bismuth results in weaker π-back-bonding interactions for bismuth-rhodium carbene complexes compared to dirhodium carbene complexes. This leads to weakening of the rhodium-carbene bond and to a more carbene-centered LUMO, accounting for the observed enhancement in bismuth-rhodium carbene electrophilicity. These findings are supported by a detailed spectroscopic study of the "donor-donor" carbene complexes Rh2(esp)2C( p-MeOPh)2 (19) and BiRh(esp)2C( p-MeOPh)2 (20), employing a combination of UV-vis and resonance Raman spectroscopy. The results reveal that carbene chemoselectivity in MRh(L)4 catalysis can be modulated to a previously unrecognized extent by the distal metalloligand.

Sulfide Protects [FeFe] Hydrogenases From O2.

[FeFe] hydrogenases catalyze proton reduction and hydrogen oxidation with high rates and efficiency under physiological conditions, but are highly oxygen sensitive. The [FeFe] hydrogenase from Desulfovibrio desulfuricans ( DdHydAB) can be purified under air in an oxygen stable inactive state Hoxair. The formation of the Hoxair state in vitro allows the handling of hydrogenases in air, making their implementation in biotechnological applications more feasible. Here, we report a simple and robust protocol for the formation of the Hoxair state in DdHydAB and the [FeFe] hydrogenase from Chlamydomonas reinhardtii, which is based on high potential inactivation in the presence of sulfide.