Tailoring the aluminum nanocrystal surface oxide for all-aluminum-based antenna-reactor plasmonic photocatalysts.

Aluminum nanocrystals (AlNCs) are of increasing interest as sustainable, earth-abundant nanoparticles for visible wavelength plasmonics and as versatile nanoantennas for energy-efficient plasmonic photocatalysis. Here, we show that annealing AlNCs under various gases and thermal conditions induces substantial, systematic changes in their surface oxide, modifying crystalline phase, surface morphology, density, and defect type and concentration. Tailoring the surface oxide properties enables AlNCs to function as all-aluminum-based antenna-reactor plasmonic photocatalysts, with the modified surface oxides providing varying reactivities and selectivities for several chemical reactions.

Recent advances in unraveling the mystery of combined nutrient stress in plants.

Efficiently regulating growth to adapt to varying resource availability is crucial for organisms, including plants. In particular, the acquisition of essential nutrients is vital for plant development, as a shortage of just one nutrient can significantly decrease crop yield. However, plants constantly experience fluctuations in the presence of multiple essential mineral nutrients, leading to combined nutrient stress conditions. Unfortunately, our understanding of how plants perceive and respond to these multiple stresses remains limited. Unlocking this mystery could provide valuable insights and help enhance plant nutrition strategies. This review focuses specifically on the regulation of phosphorous homeostasis in plants, with a primary emphasis on recent studies that have shed light on the intricate interactions between phosphorous and other essential elements, such as nitrogen, iron, and zinc, as well as non-essential elements like aluminum and sodium. By summarizing and consolidating these findings, this review aims to contribute to a better understanding of how plants respond to and cope with combined nutrient stress.

Aluminum Cayley trees as scalable, broadband, multiresonant optical antennas.

An optical antenna can convert a propagative optical radiation into a localized excitation and the reciprocal. Although optical antennas can be readily created using resonant nanoparticles (metallic or dielectric) as elementary building blocks, the realization of antennas sustaining multiple resonances over a broad range of frequencies remains a challenging task. Here, we use aluminum self-similar, fractal-like structures as broadband optical antennas. Using electron energy loss spectroscopy, we experimentally evidence that a single aluminum Cayley tree, a simple self-similar structure, sustains multiple plasmonic resonances. The spectral position of these resonances is scalable over a broad spectral range spanning two decades, from ultraviolet to midinfrared. Such multiresonant structures are highly desirable for applications ranging from nonlinear optics to light harvesting and photodetection, as well as surface-enhanced infrared absorption spectroscopy.

Construction of V2O5@MXene Cathodes toward a High Specific Capacity Aqueous Aluminum-Ion Battery.

Aqueous aluminum-ion batteries (AAIBs) are considered a strong candidate for the new generation of energy storage devices. The lack of suitable cathode materials has been a bottleneck factor hindering the future development of AAIBs. In this work, we design and construct a highly effective cathode with dual morphologies. Two-dimensional (2D) layered MXene materials possessed good conductivity and hydrophilicity, which are used as the substrates to deposit rod-shaped vanadium oxides (V2O5) to form a three-dimensional (3D) cathode. The cathode design provides a strong boost for the rapid electrochemical activities of rod-shaped V2O5 by embedding/extracting both protons (H+) and aluminum-ion (Al3+). As a result, the V2O5@MXene cathode based AAIB delivers an ultrahigh initial specific capacity of 626 mAh/g at 0.1 A/g with a stable cycle performance up to 100 cycles. This work is a breakthrough for the development of cathode materials for AAIBs.

Reduced-Dimensionality Al Nanocrystals: Nanowires, Nanobars, and Nanomoustaches.

Aluminum nanocrystals created by catalyst-driven colloidal synthesis support excellent plasmonic properties, due to their high level of elemental purity, monocrystallinity, and controlled size and shape. Reduction in the rate of nanocrystal growth enables the synthesis of highly anisotropic Al nanowires, nanobars, and singly twinned "nanomoustaches". Electron energy loss spectroscopy was used to study the plasmonic properties of these nanocrystals, spanning the broad energy range needed to map their plasmonic modes. The coupling between these nanocrystals and other plasmonic metal nanostructures, specifically Ag nanocubes and Au films of controlled nanoscale thickness, was investigated. Al nanocrystals show excellent long-term stability under atmospheric conditions, providing a practical alternative to coinage metal-based nanowires in assembled nanoscale devices.

Harmonic Generation up to Fifth Order from Al/Au/CuS Nanoparticle Films.

Dual heterostructures integrating noble-metal and copper chalcogenide nanoparticles have attracted a great deal of attention in nonlinear optics, because coupling of their localized surface plasmon resonances (LSPRs) substantially enhances light-matter interactions through local-field effects. Previously, enhanced cascaded third-harmonic generation was demonstrated in Au/CuS heterostructures mediated by harmonically coupled surface plasmon resonances. This suggests a promising approach for extending nonlinear enhancement to higher harmonics by adding an additional nanoparticulate material with higher-frequency harmonic resonances to the hybrid films. Here we report the first observation of enhanced cascaded fourth- and fifth-harmonic generation in Al/Au/CuS driven by coupled LSPRs at the fundamental (1050 nm), second harmonic (525 nm), and third harmonic (350 nm) of the pump frequency. An analytical model based on incoherent dipole-dipole interactions among plasmonic nanoparticles accounts for the observed enhancements. The results suggest a novel design for efficiently generating higher harmonics in resonant plasmonic structures by means of multiple sum-frequency cascades.

Involvement of SlSTOP1 regulated SlFDH expression in aluminum tolerance by reducing NAD+ to NADH in the tomato root apex.

Formate dehydrogenase (FDH; EC 1.2.1.2.) has been implicated in plant responses to a variety of stresses, including aluminum (Al) stress in acidic soils. However, the role of this enzyme in Al tolerance is not yet fully understood, and how FDH gene expression is regulated is unknown. Here, we report the identification and functional characterization of the tomato (Solanum lycopersicum) SlFDH gene. SlFDH encodes a mitochondria-localized FDH with Km values of 2.087 mm formate and 29.1 µm NAD+ . Al induced the expression of SlFDH in tomato root tips, but other metals did not, as determined by quantitative reverse transcriptase-polymerase chain reaction. CRISPR/Cas9-generated SlFDH knockout lines were more sensitive to Al stress and formate than wild-type plants. Formate failed to induce SlFDH expression in the tomato root apex, but NAD+ accumulated in response to Al stress. Co-expression network analysis and interaction analysis between genomic DNA and transcription factors (TFs) using PlantRegMap identified seven TFs that might regulate SlFDH expression. One of these TFs, SlSTOP1, positively regulated SlFDH expression by directly binding to its promoter, as demonstrated by a dual-luciferase reporter assay and electrophoretic mobility shift assay. The Al-induced expression of SlFDH was completely abolished in Slstop1 mutants, indicating that SlSTOP1 is a core regulator of SlFDH expression under Al stress. Taken together, our findings demonstrate that SlFDH plays a role in Al tolerance and reveal the transcriptional regulatory mechanism of SlFDH expression in response to Al stress in tomato.

Boron supply restores aluminum-blocked auxin transport by the modulation of PIN2 trafficking in the root apical transition zone.

The supply of boron (B) alleviates the toxic effects of aluminum (Al) on root growth; however, the mechanistic basis of this process remains elusive. This study filled this knowledge gap, demonstrating that boron modifies auxin distribution and transport in Al-exposed Arabidopsis roots. In B-deprived roots, treatment with Al induced an increase in auxin content in the root apical meristem zone (MZ) and transition zone (TZ), whereas in the elongation zone (EZ) the auxin content was decreased beyond the level required for adequate growth. These distribution patterns are explained by the fact that basipetal auxin transport from the TZ to the EZ was disrupted by Al-inhibited PIN-FORMED 2 (PIN2) endocytosis. Experiments involving the modulation of protein biosynthesis by cycloheximide (CHX) and transcriptional regulation by cordycepin (COR) demonstrated that the Al-induced increase of PIN2 membrane proteins was dependent upon the inhibition of PIN2 endocytosis, rather than on the transcriptional regulation of the PIN2 gene. Experiments reporting on the profiling of Al3+ and PIN2 proteins revealed that the inhibition of endocytosis of PIN2 proteins was the result of Al-induced limitation of the fluidity of the plasma membrane. The supply of B mediated the turnover of PIN2 endosomes conjugated with indole-3-acetic acid (IAA), and thus restored the Al-induced inhibition of IAA transport through the TZ to the EZ. Overall, the reported results demonstrate that boron supply mediates PIN2 endosome-based auxin transport to alleviate Al toxicity in plant roots.

Low levels of Al stimulate the aboveground growth of Davidia involucrata saplings.

Davidia involucrata is a woody perennial and the only living species in the Genus Davidia. It is native to southern China where it holds cultural and scientific importance. However, D. involucrata is now an endangered species and its natural range includes low pH soils which are increasingly impacted by acid rain, nitrogen deposition and imbalanced nutrient cycling. The combination of these stresses also poses the additional risk of aluminum (Al) toxicity. Since the responses of D. involucrata to low pH and aluminum toxicity have not been investigated previously, a hydroponic experiment was conducted to examine the growth of one year old D. involucrata saplings after 50 d growth in a range of pH and Al conditions. Plant biomass, morphology, antioxidant enzyme activity, mineral concentrations and plant ecological strategy were compared at pH 5.8 and pH 4.0 without added Al (AlCl3) and in 0.1, 0.2 and 0.5 mM Al at pH 4.0. Our results showed that compared with pH 5.8, pH 4.0 (without added Al) not only inhibited root and shoot growth but also limited accumulation of nitrogen (N) and phosphorus (P) in leaves of D. involucrate. However, low Al concentrations (0.1 and 0.2 mM Al) at pH 4.0 partially restored the aboveground growth and leaf N concentrations, suggesting an alleviation of H+ toxicity by low Al concentrations. Compared with low Al concentrations, 0.5 mM Al treatment decreased plant growth and concentrations of N, P, and magnesium (Mg) in the leaves, which demonstrated the toxicity of high Al concentration. The results based on plant ecological strategy showed that D. involucrate decreased the competitiveness and favored its stress tolerance as pH changed from 5.8 to 4.0. Meanwhile, the competitiveness and stress tolerance of D. involucrata increased and decreased at low Al concentrations, respectively, and decreased and increased at high Al concentration, respectively. These trade-offs in ecological strategy were consistent with the responses of growth and antioxidant enzyme activity, reflecting a sensitive adaptation of D. involucrata to acid and Al stresses, which may aid in sustaining population dynamics. These findings are meaningful for understanding the population dynamics of D. involucrata in response to aluminum toxicity in acid soils.

Engineering High Voltage Aqueous Aluminum-Ion Batteries.

The energy transition to renewables necessitates innovative storage solutions beyond the capacities of lithium-ion batteries. Aluminum-ion batteries (AIBs), particularly their aqueous variants (AAIBs), have emerged as potential successors due to their abundant resources, electrochemical advantages, and eco-friendliness. However, they grapple with achieving their theoretical voltage potential, often yielding less than expected. This perspective article provides a comprehensive examination of the voltage challenges faced by AAIBs, attributing gaps to factors such as the aluminum reduction potential, hydrogen evolution reaction, and aluminum's inherent passivation. Through a critical exploration of methodologies, strategies, such as underpotential deposition, alloying, interface enhancements, tailored electrolyte compositions, and advanced cathode design, are proposed. This piece seeks to guide researchers in harnessing the full potential of AAIBs in the global energy storage landscape.

Aluminum Halide-Based Electron-Selective Passivating Contacts for Crystalline Silicon Solar Cells.

Extensive research has focused on developing wide-bandgap metal compound-based passivating contacts as alternatives to conventional doped-silicon-layer-based passivating contacts to mitigate parasitic absorption losses in crystalline silicon (c-Si) solar cells. Herein, thermally-evaporated aluminum halides (AlX)-based electron-selective passivating contacts for c-Si solar cells are investigated. A low contact resistivity of 60.5 and 38.4 mΩ cm2 is obtained on the AlClx /n-type c-Si (n-Si) and AlFx /n-Si heterocontacts, respectively, thanks to the low work function of AlX. Power conversion efficiencies (PCEs) of 19.1% and 19.6% are achieved on proof-of-concept n-Si solar cells featuring a full-area AlClx /Al and AlFx /Al passivating contact, respectively. By further implementing an ultrathin SiO2 passivation interlayer and a pre-annealing treatment, the electron selectivity (especially the surface passivation) of AlX is significantly enhanced. Accordingly, a remarkable PCE of 21% is achieved on n-Si solar cells featuring a full-area SiO2 /AlFx /Al rear contact. AlFx -based electron-selective passivating contacts exhibit good thermal stability up to ≈400 °C and better long-term environmental stability. This work demonstrates the potential of AlFx -based electron-selective passivating contact for solar cells.

Highly Wavelength-Selective Self-Powered Solar-Blind Ultraviolet Photodetector Based on Colloidal Aluminum Nitride Quantum Dots.

Colloidal quantum dots are semiconductor nanocrystals endowed with unique optoelectronic properties. A major challenge to the field is the lack of methods for synthesizing quantum dots exhibit strong photo-response in the deep-ultraviolet (DUV) band. Here, a facile solution-processed method is presented for synthesizing ultrawide bandgap aluminium nitride quantum dots (AlN QDs) showing distinguished UV-B photoluminescence. Combined with the strong optical response in solar blind band, a solution-processed, self-powered AlN-QDs/ß-Ga2O3 solar-blind photodetector is demonstrated. The photodetector is characterized with a high responsivity of 1.6 mA W-1 under 0 V bias and specific detectivity 7.60 × 10-11 Jones under 5 V bias voltage with good solar blind selectivity. Given the solution-processed capability of the devices and extraordinary properties of AlN QDs, this study anticipates the utilization of AlN QDs will open up unique opportunities for cost-effective industrial production of high-performance DUV optoelectronics for large-scale applications.

Stable Low-Temperature Al Batteries Enabled by Integrating Polydopamine-Derived N-Doped Carbon Nanospheres With Flake Graphite.

The battery performance declines significantly in severely cold areas, especially discharge capacity and cycle life, which is the most significant pain point for new energy consumers. To address this issue and improve the low-temperature characteristic of aluminum-ion batteries, in this work, polydopamine-derived N-doped carbon nanospheres are utilized to modify the most promising graphite material. More active sites are introduced into graphite, more ion transport channels are provided, and improved ionic conductivity is achieved in a low-temperature environment. Due to the synergistic effect of the three factors, the ion diffusion resistance is significantly reduced and the diffusion coefficient of aluminum complex ions in the active material become larger at low temperatures. Therefore, the battery delivers an improved capacity retention rate from 23% to 60% at -20 °C and excellent ultra-long cycling stability over 5500 cycles at -10 °C. This provides a novel strategy for constructing low-temperature aluminum-ion batteries with high energy density, which is conducive to promoting the practicality of aluminum-ion batteries.

Configurational Entropy Strategy Enhanced Structure Stability Achieves Robust Cathode for Aluminum Batteries.

Rechargeable aluminum batteries (RABs) are an emerging energy storage device owing to the vast Al resources, low cost, and high safety. However, the poor cyclability and inferior reversible capacity of cathode materials have limited the enhancement of RABs performance. Herein, a high configurational entropy strategy is presented to improve the electrochemical properties of RABs for the first time. The high-entropy (Fe, Mn, Ni, Zn, Mg)3 O4 cathode exhibits an ultra-stable cycling ability (109 mAh g-1 after 3000 cycles), high specific capacity (268 mAh g-1 at 0.5 A g-1 ), and rapid ion diffusion. Ex situ characterizations indicate that the operational mechanism of (Fe, Mn, Ni, Zn, Mg)3 O4 cathode is mainly based on the redox process of Fe, Mn, and Ni. Theoretical calculations demonstrate that the oxygen vacancies make a positive contribution to adjusting the distribution of electronic states, which is crucial for enhancing the reaction kinetics at the electrolyte and cathode interface. These findings not only propose a promising cathode material for RABs, but also provide the first elucidation of the operational mechanism and intrinsic information of high-entropy electrodes in multivalent ion batteries.

Synergistic π-Conjugation Organic Cathode for Ultra-Stable Aqueous Aluminum Batteries.

Rechargeable aqueous aluminum batteries (AABs) are promising energy storage technologies owing to their high safety and ultra-high energy-to-price ratio. However, either the strong electrostatic forces between high-charge-density Al3+ and host lattice, or sluggish large carrier-ion diffusion toward the conventional inorganic cathodes generates inferior cycling stability and low rate-capacity. To overcome these inherent confinements, a series of promising redox-active organic materials (ROMs) are investigated and a π-conjugated structure ROMs with synergistic C═O and C═N groups is optimized as the new cathode in AABs. Benefiting from the joint utilization of multi-redox centers and rich π-π intermolecular interactions, the optimized ROMs with unique ion coordination storage mechanism facilely accommodate complex active ions with mitigated coulombic repulsion and robust lattice structure, which is further validated via theoretical simulations. Thus, the cathode achieves enhanced rate performance (153.9 mAh g-1 at 2.0 A g-1 ) and one of the best long-term stabilities (125.7 mAh g-1 after 4,000 cycles at 1.0 A g-1 ) in AABs. Via molecular exploitation, this work paves the new direction toward high-performance cathode materials in aqueous multivalent-ion battery systems.

α-MnO2 Cathode with Oxygen Vacancies Accelerated Affinity Electrolyte for Dual-Ion Co-Encapsulated Aqueous Aluminum Ion Batteries.

Aluminum batteries (ABs) are identified as one of the most promising candidates for the next generation of large-scale energy storage elements because of their efficient three-electron reaction. Compared to ionic electrolytes, aqueous aluminum-ion batteries (AAIBs) are considered safer, less costly, and more environmentally friendly. However, considerable cycling performance is a key issue limiting the development of AAIBs. Stable, efficient, and electrolyte-friendly cathodes are most desirable for AAIBs. Herein, a rod-shaped defect-rich α-MnO2 is designed as a cathode, which is capable to deliver high performance with stable cycling for 180 cycles at 500 mA g-1 and maintains a discharge specific capacity of ≈100 mAh g-1. In addition, the infiltrability simulation is effectively utilized to corroborate the rapid electrochemical reaction brought about by the defective mechanism. With the formation of oxygen vacancies, the dual embedding of protons and metal ions is activated. This work provides a brand-new design for the development and characterization of cathodes for AAIBs.

Designing External Pores of Aluminum Oxo Polyhedrons for Efficient Iodine Capture.

Although metal-organic polyhedra (MOPs) expansion has been studied to date, it is still a rare occurrence for their porous intermolecular assembly for iodine capture. The major limitation is the lack of programmable and controllable methods for effectively constructing and utilizing the exterior cavities. Herein, the goal of programmable porous intermolecular assembly is realized in the first family of aluminum oxo polyhedrons (AlOPs) using ligands with directional H-bonding donor/acceptor pairs and auxiliary alcohols as structural regulation sites. The approach has the advantage of avoiding the use of expensive edge-directed ditopic and face-directed tritopic ligands in the general synthesis strategy of MOPs. Combining theoretical calculations and experiments, the intrinsic relationship is revealed between alcohol ligands and the growth mechanism of AlOPs. The maximum I2 uptake based on the mass gain during sorption corresponds to 2.35 g g-1, representing the highest reported I2 sorption by an MOP. In addition, it can be easily regenerated and maintained the iodine sorption capacity, revealing its further potential application. This method of constructing stable and programmable porous materials will provide a new way to solve problems such as radionuclide capture.

Optimization Strategy in Hydrogen Storage Performance of Ti─V─Cr─Mn Alloys via LiAlH4.

V-based solid solution materials hold a significant position in the realm of hydrogen storage materials because of its high hydrogen storage capacity. However, the current dehydrogenation temperature of V-based solid solution exceeds 350 °C, making it challenging to fulfill the appliance under moderate conditions. Here advancements in the hydrogen storage properties and related mechanisms of TiV1.1Cr0.3Mn0.6 + x LiAlH4 (x = 0, 5, 8, 10 wt.%) composites is presented. According to the first principle calculation analysis, the inclusion of Al and Li atoms will lower the binding energy of hydride, thus enhancing the hydrogen absorption reaction and significantly decreasing the activation difficulty. Furthermore, based on crystal orbital Hamilton population (COHP) analysis, the strength of the V─H and Ti─H bonds after doping LiAlH4 are reduced, leading to a decrease of the hydrogen release activation energy (Ea) for the V-based solid solution material, thus the hydrogen release process is easier to carry out. Additionally, the structure of doped LiAlH4 exhibits an outstanding hydrogen release rate of 2.001 wt.% at 323 K and remarkable cycling stability.

Advanced Hollow Cubic FeCo-N-C Cathode Electrocatalyst for Ultrahigh-Power Aluminum-Air Battery.

The exploration of electrocatalysts toward oxygen reduction reaction (ORR) is pivotal in the development of diverse batteries and fuel cells that rely on ORR. Here, a FeCo-N-C electrocatalyst (FeCo-HNC) featuring with atomically dispersed dual metal sites (Fe-Co) and hollow cubic structure is reported, which exhibits high activity for electrocatalysis of ORR in alkaline electrolyte, as evidenced by a half-wave potential of 0.907 V, outperforming that of the commercial Pt/C catalyst. The practicality of such FeCo-HNC catalyst is demonstrated by integrating it as the cathode catalyst into an alkaline aluminum-air battery (AAB) paring with an aluminum plate serving as the anode. This AAB demonstrates an unprecedented power density of 804 mW cm-2 in ambient air and an impressive 1200 mW cm-2 in an oxygen-rich environment. These results not only establish a new benchmark but also set a groundbreaking record for the highest power density among all AABs reported to date. Moreover, they stand shoulder to shoulder with state-of-the-art H2-O2 fuel cells. This AAB exhibits robust stability with continuous operation for an impressive 200 h. This groundbreaking achievement underscores the immense potential and forward strides that the present work brings to the field.

CMOS-Integrated Ternary Content Addressable Memory using Nanocavity CBRAMs for High Sensing Margin.

The development of data-intensive computing methods imposes a significant load on the hardware, requiring progress toward a memory-centric paradigm. Within this context, ternary content-addressable memory (TCAM) can become an essential platform for high-speed in-memory matching applications of large data vectors. Compared to traditional static random-access memory (SRAM) designs, TCAM technology using non-volatile resistive memories (RRAMs) in two-transistor-two-resistor (2T2R) configurations presents a cost-efficient alternative. However, the limited sensing margin between the match and mismatch states in RRAM structures hinders the potential of using memory-based TCAMs for large-scale architectures. Therefore, this study proposes a practical device engineering method to improve the switching response of conductive-bridge memories (CBRAMs) integrated with existing complementary metal-oxide-semiconductor (CMOS) transistor technology. Importantly, this work demonstrates a significant improvement in memory window reaching 1.87 × 107 by incorporating nanocavity arrays and modifying electrode geometry. Consequently, TCAM cells using nanocavity-enhanced CBRAM devices can exhibit a considerable increase in resistance ratio up to 6.17 × 105, thereby closely approximating the sensing metrics observed in SRAM-based TCAMs. The improved sensing capability facilitates the parallel querying of extensive data sets. TCAM array simulations using experimentally verified device models indicate a substantial sensing margin of 65× enabling a parallel search of 2048 bits.