Bioenergy production from chicken feather waste by anaerobic digestion and bioelectrochemical systems.

BACKGROUND: Poultry feather waste has a potential for bioenergy production because of its high protein content. This research explored the use of chicken feather hydrolysate for methane and hydrogen production via anaerobic digestion and bioelectrochemical systems, respectively. Solid state fermentation of chicken waste was conducted using a recombinant strain of Bacillus subtilis DB100 (p5.2). RESULTS: In the anaerobic digestion, feather hydrolysate produced maximally 0.67 Nm3 CH4/kg feathers and 0.85 mmol H2/day.L concomitant to COD removal of 86% and 93%, respectively. The bioelectrochemical systems used were microbial fuel and electrolysis cells. In the first using a microbial fuel cell, feather hydrolysate produced electricity with a maximum cell potential of 375 mV and a current of 0.52 mA. In the microbial electrolysis cell, the hydrolysate enhanced the hydrogen production rate to 7.5 mmol/day.L, with a current density of 11.5 A/m2 and a power density of 9.26 W/m2. CONCLUSIONS: The data indicated that the sustainable utilization of keratin hydrolysate to produce electricity and biohydrogen via bioelectrical chemical systems is feasible. Keratin hydrolysate can produce electricity and biofuels through an integrated aerobic-anaerobic fermentation system.

Anaerobic digestion biogas upgrading using a two-stage membrane system under pilot-scale conditions.

In the present work, the construction, and operation of a pilot-scale biogas upgrading system is presented, employing 2 commercial polyimide (PI) membranes. The Upgrading system treats biogas produced via anaerobic digestion of the sludge, produced from the treatment of municipal wastewater in the facilities of Thessaloniki's Wastewater Treatment Plant. The goal of the separation unit is the production of high purity biomethane (>95%) for potential reuse in terms of energy. The fabrication of the pilot scale system includes the scale up of a laboratory setup separating CO2 from binary CH4-CO2 gas mixture. After the stability tests of the process, for the operation of 5 months (February to June 2023) the purity and recovery of CH4 in the final gas product. The experimental results showed an average recovery of CH4 of 95.7% for an average 55% feed composition, whereas the average purity in the final product was equal to 82.4%. The purity results were lower because of the N2 presence in the product stream (average 17.5%). After normalization with the help of the lab-scale binary results, the expected results assuming N2 absence would be 99.8% CH4 purity and 67% CH4 recovery. Finally, 3 different membrane configurations are compared in terms of their energy production, concluding to the efficiency of 2-stage configuration with recycling stream for the optimal combination of theoretical stage cut fractions.

Techno-economic evaluation of GHG emissions mitigation of biomethane upgrading technologies.

The current trend in the European biogas industry is to shift away from electricity production towards the production of biomethane for the need to replace natural gas. The upgrading of biogas to biomethane is normally performed by separating the biogas in a stream containing natural gas grid quality methane and a stream containing mostly CO2. The CO2 stream is normally released into the atmosphere; however, part of the methane may still remain in it, and, if not oxidized, even a small fraction of methane released may jeopardise all the GHG emissions savings from producing the biomethane, being methane a powerful climate forcer. Scope of this work is to assess the opportunity cost of installing an Off Gas Combustion (OGC) device in biomethane upgrading plants. The currently available technologies for biogas upgrading to biomethane and the most common technology of OGC (the Regenerative Thermal Oxidisers, RTO) are described according to their performances and cost. Then the cost per tonne of CO2eq avoided associated to the adoption of RTO systems in relation to the upgrading performance is calculated to identify a potential threshold for an effective and efficient application of the RTO systems. It is found that, in case of upgrading technologies which can capture almost all biomethane in the upgrading off-gas (i.e. 99.9%), currently the adoption of an RTO to oxidise the methane left in the off-gas would add costs and need additional fuel to be operated, but would generate limited GHG emission savings, therefore the cost per tonne of CO2eq emissions avoided would result not competitive with other GHG emissions mitigation investments. While the installation of RTOs on upgrading systems with a methane slip of 0.3%, or higher, normally results cost competitive in reducing GHG emissions. The installation of an RTO on systems with a methane slip of 0.2% results in a cost per tonne of CO2eq emissions avoided of 50-100 euro, which is comparable to the current cost of CO2 emissions allowances in the EU ETS carbon market, representing therefore a reasonable choice for a threshold on methane slip regulation for biogas upgrading systems.

Single mixed refrigerant biomethane liquefaction plant integrated with solar energy: Dynamic simulation for the decarbonization of the heavy road transport sector.

This works proposes a dynamic thermoeconomic analysis of a liquefied biomethane production plant to meet the fuel demand of a fleet of heavy duty trucks in the south of Italy. The biomethane is obtained from the upgrading of the biogas produced by means of anaerobic digestion through a plug flow reactor fed by organic fraction of municipal solid waste. The upgrading of the biogas is realized using a three-stage membrane compression process, producing a 96 % pure biomethane. The biomethane liquefaction is realized using a single-mixed refrigerant process and compared to a Linde cycle process. The whole system is assisted by solar energy to reduce the fossil energy consumption of the process and feed-in tariffs are considered as funding policy. The models for the anaerobic digestion, the biogas upgrading, and the biomethane liquefaction are in detail developed in MatLab. The anaerobic digestion model is based on the ADM1 biological model, integrated with a suitable heat transfer model. The biogas upgrading model is based on a simplified Fick model. The liquefaction model is based on an equivalent two heat-exchangers model, taking into account the transient heat transfer. All the components are then integrated in TRNSYS to perform the dynamic simulation for one operating year of the whole system. Results from the thermoeconomic analysis are outstanding in terms of profitability, showing a payback period of less than 2 years and a Net Present Value of the system of 402 M€. The great environmental impact is also confirmed by a Primary Energy Saving of 91 % and a dramatic reduction of 86 % of the CO2 equivalent emissions.

Investigating functional mechanisms in the Co-biodegradation of lignite and guar gum under the influence of salinity.

The biodegradation of guar gum by microorganisms sourced from coalbeds can result in low-temperature gel breaking, thereby reducing reservoir damage. However, limited attention has been given to the influence of salinity on the synergistic biodegradation of coal and guar gum. In this study, biodegradation experiments of guar gum and lignite were conducted under varying salinity conditions. The primary objective was to investigate the controlling effects and mechanisms of salinity on the synergistic biodegradation of lignite and guar gum. The findings revealed that salinity had an inhibitory effect on the biomethane production from the co-degradation of lignite and guar gum. The biomethane production declined with increasing salinity levels, decreasing from 120.9 mL to 47.3 mL. Even under 20 g/L salt stress conditions, bacteria in coalbeds could effectively break the gel and the viscosity decreased to levels below 5 mPa s. As salinity increased, the removal rate of soluble chemical oxygen demand (SCOD) decreased from 55.63% to 31.17%, and volatile fatty acids (VFAs) accumulated in the digestion system. High salt environment reduces the intensity of each fluorescence peak. Alterations in salinity led to changes in microbial community structure and diversity. Under salt stress, there was an increased relative abundance of Proteiniphilum and Methanobacterium, ensuring the continuity of anaerobic digestion. Hydrogentrophic methanogens exhibited higher salt tolerance compared to acetoclastic methanogens. These findings provide experimental evidence supporting the use of guar gum fracturing fluid in coalbeds with varying salinity levels.

A pilot study to capture methane from the exhausted air of dairy cows using a cryogenic approach.

In the agricultural sector, ruminants are the largest methane (CH4) emission source and many efforts have been undertaken to reduce these greenhouse gas emissions, while compromising animal health and physiology. On the other hand, ruminal CH4, which is biomethane, is in high demand, especially in its liquid form (LBM) that can be used as high energy density fuel. However, CH4 released from a ruminant is immediately mixed with air and highly diluted (<0.1%), challenging CH4 capture technologies. Here we aimed to construct a cryogenic pilot system to capture and liquefy enteric CH4 released from dairy cows kept in respiration chambers. To approach this aim, the outlet air from the chambers was directed through a two-step cooling trap to capture CO2 (-120 to -130 °C) as a solid in the first and CH4 and O2 as liquids in the second cooler (-160 to -180 °C). Warming the second cooler resulted in the evaporation of O2, thereby separating O2 and CH4. LBM purity was in average 90% and was lowest at warming rates higher than 0.88 °C/min. The mean CH4 capture efficiency was 92% and found to be independent of sequestration time and flow rate. However, an increase in CH4 concentration to 0.6%, as it occurs directly at the muzzle of a cow, reduced the sequestration time for CH4. These results show that cryogenic technology can be used to obtain LBM from the air containing ultra-low CH4 concentrations as it is found in cattle barns with high efficiency and purity.

Green synthesis of Fe3O4@ceramsite from sludge improving anaerobic digestion performance of waste activated sludge.

Anaerobic digestion (AD) is a promising technique for waste management, which can achieve sludge stabilization and energy recovery. This study successfully prepared Fe3O4@ceramsite from WAS and applied it as an additive in sludge digestion, aiming to improve the conversion of organics to biomethane efficiency. Results showed that after adding the Fe3O4@ceramsite, the methane production was enhanced by 34.7% compared with the control group (88.0 ± 0.1 mL/g VS). Further mechanisms investigation revealed that Fe3O4@ceramsite enhanced digesta stability by strong buffering capacity, improved sludge conductivity, and promoted Fe (III) reduction. Moreover, Fe3O4@ceramsite has a larger surface area and better porous structure, which also facilitated AD performance. Microbial community analysis showed that some functional anaerobes related to AD such as Spirochaeta and Smithella were enriched with Fe3O4@ceramsite treatment. Potential syntrophic metabolisms between syntrophic bacteria (Syntrophomonas, associated with DIET) and methanogens were also detected in the Fe3O4@ceramsite treatment AD system.

Exploring the Potential of Microbial Coalbed Methane for Sustainable Energy Development.

By allowing coal to be converted by microorganisms into products like methane, hydrogen, methanol, ethanol, and other products, current coal deposits can be used effectively, cleanly, and sustainably. The intricacies of in situ microbial coal degradation must be understood in order to develop innovative energy production strategies and economically viable industrial microbial mining. This review covers various forms of conversion (such as the use of MECoM, which converts coal into hydrogen), stresses, and in situ use. There is ongoing discussion regarding the effectiveness of field-scale pilot testing when translated to commercial production. Assessing the applicability and long-term viability of MECoM technology will require addressing these knowledge gaps. Developing suitable nutrition plans and utilizing lab-generated data in the field are examples of this. Also, we recommend directions for future study to maximize methane production from coal. Microbial coal conversion technology needs to be successful in order to be resolved and to be a viable, sustainable energy source.

Deciphering cleaner and sustainable frontiers in scientific cow waste valorization: a review.

The forecasted global population growth is poised to create a greater exigency for livestock-derived food production, leading to a significant waste generation from the industrial-scale livestock operations, which necessitates to develop sustainable waste management solutions. The heightened demand for livestock and dairy products has driven a surge in cow waste (CW) production. While CW is typically used as organic fertilizer or solid fuel, improper disposal poses potential environmental hazards. Anaerobic digestion and composting transform CW into valuable products, such as biofuels and organic fertilizers, with the potential for electricity and heat generation, biochar production, and advanced friction materials. The CW contains essential inorganic and organic compounds vital for plant functions, including lignin, cellulose, hemicellulose, nitrogen, and minerals such as potassium, sulfur, iron, magnesium, copper, cobalt, and manganese. Additionally, the rich microbial diversity in cow dung drives the production of bioenergy carriers like biomethane and biohydrogen, promoting cost-effective energy generation and environmental sustainability. This review employs bibliometric analysis to explore the latest trends in CW applications, with a particular focus on innovative applications such as cellulose extraction, biochar production, microbial fuel cells, and nanoparticle synthesis. It further evaluates the environmental impacts of these technologies and assesses their potential to advance sustainable and cleaner frontiers in the valorization of CW.

Mini-review: Nanoparticles for enhanced biogas upgrading.

This mini-review is intended to explore the innovative applications of nanoparticles (NPs) in biogas upgrading, emphasizing their capacity to enhance biogas quality. Numerous studies underscore how NPs, when applied during anaerobic digestion, can boost not only the quantity but also the quality of the produced biogas, leading to reduce significantly the concentration of hydrogen sulphide or even to remove it completely. Moreover, NPs are proving to be excellent alternatives as adsorbent materials, achieving up to 400 mgH2S g-1 NPs. In addition, new studies are exploring the application of NPs to increase the efficiency of biological treatments thanks to their unique features. This review also emphasizes the potential benefits and addresses the challenges that need to be overcome for these technologies to reach their full potential, ultimately contributing to the development of a sustainable and environmentally friendly energy landscape.

Enhancing landfill efficiency to drive greenhouse gas reduction: A comprehensive study on best practices and policy recommendations.

This article investigates the pivotal role of non-hazardous waste landfills in achieving greenhouse gas (GHG) reduction objectives within the European Union (EU).1 This study leverages the experience of key stakeholders in the European landfilling, assesses the efficacy of 'best-in-class' landfill installations, evaluates their potential impact on GHG reduction, and offers concrete recommendations for operators and policymakers. 'Best-in-class' landfills exceed the commonly accepted best practices by implementing all the following practices: (1) an anticipated capture system during the operating phase, (2) prompt installation of the final cover and capture system, with use of an impermeable cover, (3) operated as bioreactor, keeping optimal humidity, (4) adequate maintenance and reporting, (5) recovery of captured gas and (6) treatment of residual methane emissions throughout the waste decomposition process. The main finding is that switching from the actual mix of practices to 'best in class' practices would reduce by ~21 MtCO2eq (-36%) the emissions due to the degradation of waste landfilled between 2024 and 2035, compared to the 'business-as-usual scenario', while also providing a renewable energy source, bringing potential avoided emissions and energy sovereignty. The findings underscore that in addition to implementing the organics diversion and waste reduction targets of the EU, adopting 'best-in class' landfill practices has the potential to bolster energy recovery, mitigate emissions and stimulate biomethane production, thereby advancing the EU environmental goals.

A high-value biohythane production: Feedstocks, reactor configurations, pathways, challenges, technoeconomics and applications.

In recent years, the demand for high-quality biofuels from renewable sources has become an aspirational goal to offer a clean environment by alternating the depleting fossil fuels to meet future energy needs. In this aspect, biohythane production from wastes has received extensive research interest since it contains superior fuel characteristics than the promising conventional biofuel i.e. biogas. The main aim is to promote research and potentials of biohythane production by a systematic review of scientific literature on the biohythane production pathways, substrate/microbial consortium suitability, reactor design, and influential process/operational factors. Reactor configuration also decides the product yield in addition to other key factors like waste composition, temperature, pH, retention time and loading rates. Hence, a detailed emphasis on different reactor configurations with respect to the type of feedstock has also been given. The technical challenges are highlighted towards process optimization and system scale up. Meanwhile, solutions to improve product yield, technoeconomics, applications and key policy and governance factors to build a hydrogen based society have also been discussed.

Complexity of acclimatization substrate affects anaerobic digester microbial community response to organic load shocks.

This study elucidated the changes in the short-term response to organic load shocks of the anaerobic digestion (AD) microbiome acclimatized to a simple substrate and a complex substrate. Batch vial reactors were inoculated with AD sludge acclimatized to either a simple (starch and hipolypeptone) or a complex (dog food and starch) substrate, both with carbon-to-nitrogen ratio of 25. Organic loads in the form of an easily degradable substrate mix (starch and hipolypeptone) with concentrations varying from 0 to 5 g VS/L were applied to the reactors. Runs utilizing the inoculum acclimatized to a complex substrate sustained its methane productivity despite the high organic load shocks which the inoculum acclimatized to a simple substrate was unable to handle efficiently. The alpha-diversity of the microbiome decreased with increase in organic load for inoculum acclimatized with a simple substrate but was unaffected for the case of the inoculum acclimatized with a complex substrate. LactobacillalesandCloacimonadales were inferred to be major players in starch degradation pathways for the inoculum acclimatized using a simple substrate as predicted by the bioinformatics package PICRUSt2. However, acclimatizing using a complex substrate did not support their growth and were replaced by Coriobacteriales which provided higher flexibility in terms of the predicted regulated metabolic functions. The predicted functional regulation of Synergistales and Syntrophales increased with acclimatization using a complex substrate which also showed increase in the flexibility of the microbiome towards handling organic load shocks. Acetoclastic pathway was upregulated with increase in organic load regardless of the acclimatization substrate while the hydrogenotrophic pathway was downregulated. Overall, acclimatization using a complex substrate increased the robustness and flexibility of the microbiome towards organic load shocks.

Metagenomic characterization of biomethane transformation by lipid-catalyzed anaerobic fermentation of lignite.

The present study aims at using lipid in a novel way to improve the efficiency of methane production from lignite anaerobic digestion. The obtained results showed an increase by 3.13 times of the cumulative biomethane content of lignite anaerobic fermentation, when 1.8 g lipid was added. The gene expression of functional metabolic enzymes was also found to be enhanced during the anaerobic fermentation. Moreover, the enzymes related to fatty acid degradation such as long-chain Acyl-CoA synthetase and Acyl-CoA dehydrogenase were increased by 1.72 and 10.48 times, respectively, which consequently, accelerated the conversion of fatty acid. Furthermore, the addition of lipid enhanced the carbon dioxide trophic and acetic acid trophic metabolic pathways. Hence, the addition of lipids was argued to promote the production of methane from lignite anaerobic fermentation, which provided a new insight for the conversion and utilization of lipid waste.

Advanced steam-explosion pretreatment mediated anaerobic digestion of municipal sludge: Effects on methane yield, emerging contaminants removal, and microbial community.

Advanced steam explosion pretreatment, i.e., the Thermal hydrolysis process (THP) is applied mainly to improve the sludge solubilization and subsequent methane yield in the downstream anaerobic digestion (AD) process. However, the potential of THP in pretreating the high solids retention time (SRT) sludges, mitigating the risk of emerging organic micropollutants and effects on anaerobic microbiome in digester remains unclear. In this study, sludge from a sequencing batch reactor (SBR) system operating at a SRT of 40 days was subjected to THP using a 5 L pilot plant at the temperature ranges of 120-180 °C for 30-120 min. The effect of THP on organics solubilization, methane yield, organic micropollutant removal, and microbial community dynamics was studied. The highest methane yield of 507 mL CH4/g VSadded and volatile solids (VS) removal of 54% were observed at 160°C- 30min THP condition, i.e., 4.1 and 2.6 times higher than the control (123 mL CH4/gVSadded, 20.7%), respectively. The experimental values of hydrolysis coefficient and methane yield have been predicted using Modified Gompertz, First order, and Logistics models. The observed values fitted well with all three models showing an R2 value between 0.96 and 1.0. THP pretreated sludges showed >80% removal of Trimethoprim, Enrofloxacin, Ciprofloxacin, and Bezafibrate. However, Carbamazepine, 17α-ethinylestradiol, and Progesterone showed recalcitrant behavior, resulting in less than 50% removal. Microbial diversity analysis showed the dominance of Proteobacteria, Firmicutes, Chloroflexi, and Bacteroidetes, collectively accounting for >70-80% of bacterial reads. They are mainly responsible for the fermentation of complex biomolecules like polysaccharides, proteins, and lipids. The THP-mediated anaerobic digestion of sludge shows better performance than the control digestion, improved methane yield, higher VS and micropollutants removal, and a diverse microbiome in the digester.

Dynamic modeling and parameter estimation of biomethane production from microalgae co-digestion.

This work proposes a dynamic modeling procedure applied to biomethane production from microalgae residual co-digestion. A two-stage anaerobic digestion representation is selected, considering acidogenesis and methanogenesis as main reaction pathways. Based on the experimental database generated in the University of Mons Laboratories, several candidate models, assuming the presence or absence of biomass dynamics, are suggested, and parametric structural and local identifiability studies are performed. An original parameter estimation procedure is applied to a data-set partition used for model direct validation. The remaining experiment data are dedicated to cross-validation. The results point out how these dynamic models may serve as advanced monitoring software tools such as digital twins, even in the presence of incomplete process data.

The Use of Fungi of the Trichoderma Genus in Anaerobic Digestion: A Review.

Plant waste biomass is the most abundant renewable energy resource on Earth. The main problem with utilising this biomass in anaerobic digestion is the long and costly stage of degrading its complex structure into simple compounds. One of the promising solutions to this problem is the application of fungi of the Trichoderma genus, which show a high capacity to produce hydrolytic enzymes capable of degrading lignocellulosic biomass before anaerobic digestion. This article discusses the structure of plant waste biomass and the problems resulting from its structure in the digestion process. It presents the methods of pre-treatment of lignocellulose with a particular focus on biological solutions. Based on the latest research findings, key parameters related to the application of Trichoderma sp. as a pre-treatment method are discussed. In addition, the possibility of using the digestate from agricultural biogas plants as a carrier for the multiplication of the Trichoderma sp. fungi, which are widely used in many industries, is discussed.

Influence of microwave temperature and power on the biomethanation of food waste under mesophilic anaerobic conditions.

Food waste is an attractive feedstock for Anaerobic Digestion due to its high biodegradability and moisture content. Nevertheless, due to its complex structure and composition, methane yield is typically compromised with 50-60% of the theoretical maximum obtained. The well-known limitation of the hydrolysis step can be circumvented by adopting feedstock pre-treatments, such as microwave irradiation. It improves solubilization of various FW components making them more readily available for the microorganisms and reducing AD process duration. In this work different heating rates (7.8, 3.9 and 1.9 °C/min) and temperatures (85, 115, 145, 175 °C) were applied when pre-treating food waste as a substrate for AD. Increase in the solubilization of organic matter in the form of Soluble Chemical Oxygen Demand was the most significative change in FW characteristics after pre-treatment, with final temperature of 175 °C and heating rate of 3.9 °C showing a 73.19% increment. Nevertheless, process performance of AD of MW FW was optimum at 85 °C 7.8 ramp, showing no intermediate products accumulation, up to 77% more methane produced in the first week of digestion compared to the other conditions tested and reduction of 96.36% on the lag phase duration, compared to the control. On the other hand, samples treated at 175 °C, regardless of heating rate, consistently showed poor process performance, with low methane yield, possibly due to the formation of hard-to-digest compounds. This work underlines the importance of adjusting microwave temperature and power when pre-treating FW for biomethane production so the process is optimized.

Exploring the environmental consequences of roadside grass as a biogas feedstock in Northwest Europe.

The Russo-Ukrainian war has highlighted concerns regarding the European Union's (EU) energy security, given its heavy dependence on Russian natural gas for electricity and heating. The RePowerEU initiative addresses this challenge by targeting a significant increase in biomethane production (up to 35 billion m3 by 2030) to replace natural gas, aligning with the EU methane strategy's emission reduction and air quality improvement goals. However, the use of energy crops as biogas feedstock has raised land-use concerns, necessitating a policy shift towards alternative sources such as agro-residues, livestock manure, and sewage sludge. This study investigates the environmental impacts of using roadside grass clippings (RG) as an alternative feedstock for biogas production, focusing on selected regions in Northwest Europe (Belgium, Netherlands). The aim is to evaluate the environmental performance of RG as a mono- or co-substrate for biogas production, comparing it to the current practice of composting. Additionally, the study assesses the environmental impacts associated with biogas end-use in these regions. The results indicate that co-digestion of RG with pig manure offers a more environmentally friendly alternative compared to mono-digestion of RG or the existing composting practice. This finding is primarily attributed to the avoided emissions resulting from conventional pig manure management. Furthermore, in terms of climate change impacts concerning biogas end-use, the study identifies that combined heat and power (CHP) systems are preferable to biomethane recovery in regions with a natural gas-based electricity mix. However, for reducing fossil resource use, biomethane recovery emerges as the preferred option. By providing insights into the environmental performance of RG as a biogas feedstock and evaluating the impacts of different biogas end-use options, this study offers insights to policymakers for the development of sustainable energy strategies in Northwest Europe.

Low-carbon emitting university campus achieved via anaerobic digestion of canteen food wastes.

University campuses of China accommodate over 30 million students and consume a large amount of fossil fuel energy, leading to high carbon emission. Implementation of bioenergy (e.g. biomethane) is one of promising ways to mitigate emission and foster low-carbon emitting campus. Biomethane potential from anaerobic digestion (AD) of food waste (FW) in 2344 universities of 353 cities of mainland China have been estimated herein. Results have shown that 1.74 million tons of FW are discharged from campus canteens annually, that can generate 195.8 million m3 biomethane and reduce 0.77 million ton CO2-eq. Wuhan, Zhengzhou, and Guangzhou are the top three cities having the most biomethane potential from campus FW, accounting up to 8.92, 7.89, and 7.28 million m3 year-1, respectively. Technical challenges and solutions have been summarized and discussed such as FW purity, accumulation of ammonia and fatty acid, foaming, and plant site selection. Low-carbon campuses are supposed to be achieved by using bioenergy, like biomethane, in appropriate ways after resolving technical and management challenges.