Clinical and radiographic results of locking plate with medial support screw in Proximal Humerus fracture - the more, the better?

BACKGROUND: The calcar of the proximal humerus is a fundamental structure for medial humeral column support. This study aimed to assess the outcome of osteosynthesis across cases of unstable proximal humerus fractures (PHFs) with medial calcar comminution, following treatment with a PHILOS locking plate and medial support screw (MSS). METHODS: Between January 2010 and December 2018, we retrospectively analyzed the outcomes of 121 cases of osteosynthesis for PHFs with medial column disruption. For the medial support, at least one oblique screw was inserted within 5 mm of the subchondral bone in the inferomedial quadrant of the humeral head. All patients were categorized into two groups: 26 patients in the single MSS group, and 95 in the multiple MSS group. Follow-up after at least an year involved clinical and radiographic outcome evaluations, and correspondingly measuring the Constant-Murley score, University of California, Los Angeles (UCLA) shoulder scale, pain visual analogue scale (VAS), major complications, neck-shaft angle (NSA), humeral head height (HHH), and the eventual time to bone union. Risk factors for the major complications were assessed by multivariate logistic regression analyses. RESULTS: The cohort's mean age was 64.4 ± 15.4 years, and the mean follow-up duration was 19.5 ± 7.6 months. At the final follow-up, between the single MSS and multiple MSS groups, no significant differences in the Constant-Murley score (p = 0.367), UCLA score (p = 0.558), VAS (p = 0.571), time to bone union (p = 0.621), NSA loss (p = 0.424), and HHH loss (p = 0.364) were observed. The incidence of complications (p = 0.446) based on the number of MSS were not significantly different. The initial insufficient reduction after surgery (of NSA < 125°) was found to be a significant risk factor for post-surgical complications. CONCLUSIONS: To treat unstable PHFs, the use of at least one MSS along with a locking plate system is sufficient to achieve satisfactory outcomes. Successful operative treatment using a locking plate for PHF treatment is inherent in anatomical fracture reduction, coupled with medial column support.

Articular Fragment Escape and Carpal Subluxation Following Distal Radius Fracture Fixation.

Surgical fixation of distal radius fractures is among the more common procedures performed by hand surgeons. The approach to surgical management is based on a variety of factors including injury mechanism, fracture pattern, patient characteristics, bone quality, soft tissue injury, and surgeon preference. For the majority of fracture types, volar locking plate fixation has become the most commonly used method of fracture fixation. Although uncommon, complications can arise following this form of treatment, one of which is escape of an articular fragment with resultant carpal instability. More often seen in conjunction with poorly reduced or captured displaced volar lunate facet fragments, fixation failure and carpal instability can occur with other fracture patterns that have garnered less attention, particularly those involving the radial column or dorsal lunate facet. Thorough preoperative planning to recognize fracture patterns that lead to this complication is paramount. Proper selection of implants used to secure the fracture and the choice as well as duration of postoperative immobilization is critical to minimizing this complication. We aim to (1) describe the relevant anatomy involved with this complication, (2) organize and classify the various distal radius articular fragment escape patterns that can occur following fracture fixation, and (3) discuss strategies that can help prevent this complication.

Comparison of Locking Plate Alone and Locking Plate Combined with 3D Printed Polymethylmethacrylate Augmentation in Treating Proximal Humerus Fractures in the Elderly.

BACKGROUND: Locking plates are widely used in open reduction internal fixation (ORIF) for proximal humeral fracture (PHF). However, the optimal surgical treatment of unstable, displaced PHF in elderly patients remains controversial. This study aimed to compare the radiological and clinical outcomes of surgical treatment of PHF in the elderly with locking plate (LP) alone and locking plate combined with 3D printed polymethylmethacrylate (PMMA) prosthesis augmentation (LP-PA). METHODS: From May 2015 to April 2021, a total of 97 patients aged ≥ 60 years with acute unstable PHF who underwent osteosynthesis with either LP (46 patients) or LP-PA (51 patients) were retrospectively analyzed. For the LP-PA group, a customized proximal humeral prosthesis made of PMMA cement was intra-operatively fabricated by a three-dimensional (3D) printed prototype mold for the humeral medial support. Radiological outcomes were analyzed by measuring the value of neck-shaft angle (NSA) and humeral head height (HHH). The clinical outcomes were evaluated using Constant-Murley Score (CMS), Disabilities of the Arm Shoulder and Hand (DASH) score, American Shoulder and Elbow Surgeons (ASES) score, and the shoulder range of motion (ROM). Pain was measured using a visual analogue scale (VAS). RESULTS: At the one-year follow-up, all fractures healed radiologically and clinically. The mean changes of NSA and HHH over the follow-up period were markedly smaller in the LP-PA group (3.8 ± 0.9° and 1.7 ± 0.3 mm) than those in the LP group (9.7 ± 2.1° and 3.2 ± 0.6 mm, both P < 0.0001). The LP-PA group also presented lower DASH score (17.1 ± 3.6), higher ASES score (89.5 ± 11.2) and better ROM in forward elevation (142 ± 26°) and external rotation (59 ± 11°) compared to the LP group (28.9 ± 4.8 for DASH score, P < 0.0001; 82.3 ± 9.0 for ASES score, P < 0.001; 129 ± 21° for forward elevation, P = 0.008; and 52 ± 9° for external rotation, P = 0.001). There was no significant difference in overall complication rate between the two groups, although the complication rate of screw perforation was higher in the LP-PA group (P = 0.172). CONCLUSIONS: For PHF in elderly patients, the combination of LP fixation and PMMA prosthesis augmentation effectively improved humeral head support and reduction maintenance, providing satisfactory outcomes both radiologically and clinically. This technique also reduced the incidence of screw perforation associated with plate fixation alone, making it a reasonable option to ensure satisfactory clinical outcomes.

Far cortical locking constructs for fixation of distal femur fractures in an Asian population: A prospective observational study.

BACKGROUND: The stiffness of locked plates suppresses healing process, prompting the introduction of far cortical locking to address this issue. This study aimed to demonstrate the clinical efficacy of far cortical locking constructs in treating distal femoral fractures in an Asian population. METHODS: This multicenter prospective observational study was conducted at four university hospitals between February 2018 and February 2021. Demographic data, the presence of metaphyseal comminution, and surgical fixation details were recorded. Clinical outcomes, including single-leg standing, EQ-5D, and EQ-VAS scores, and radiologic outcomes, including the RUST score of each cortex, were evaluated and compared according to the presence of metaphyseal comminution. RESULTS: There were 37 patients (14 men and 23 women) with a mean age of 67.3 ± 11.8 years. Twenty-two patients had metaphyseal comminution (59%), and 15 presented simple fractures in metaphyseal areas. Four patients (13%) could stand on one leg >10s at 6 weeks, and 24 patients (92%) at 1 year. EQ-5D increased from 0.022 ± 0.388 to 0.692 ± 0.347, and the mean EQ-VAS 51.1 ± 13.1 to 74.1 ± 24.1 between discharge (n = 37) and post-operative 1 year (n = 33), respectively. RUST score presented increment for time, from 6.2 ± 1.8 at 6 week to 11.6 ± 1.1 at 1 year. Radiological healing demonstrated rapid increase from week 6 (16/28, 43%) to month 3 (27/31, 87%), with no obvious increase was observed in 6 months (23/26, 89%) or 12 months (25/28, 89%). Simple metaphyseal fractures presented significantly higher RUST scores at 6 weeks and 3 months, but there was no difference in RUST scores at 6 months or 1 year according to metaphyseal comminution. CONCLUSIONS: Plate constructs with far cortical locking screws provided safe and effective fixation for distal femoral fractures, with consistent radiological and clinical results, regardless of metaphyseal comminution.

Suprapatellar intramedullary nail combined with screw fixation has comparable surgical outcomes to minimally invasive locking plate fixation in ipsilateral tibial plateau and shaft fractures.

PURPOSE: To compare union rate, union time, alignment, and complication rate in ipsilateral tibia plateau and shaft fractures treated via suprapatellar intramedullary nailing with screw fixation and minimally invasive locking plate fixation. MATERIALS AND METHODS: A retrospective study was conducted on 48 patients who underwent minimally invasive plate fixation (n = 35) or suprapatellar intramedullary nailing with screw fixation (n = 13), for the treatment of ipsilateral tibial plateau and shaft fractures with at least 1-year follow-up. Union rate, union time, radiologic alignment, and complication rate such as malalignment, nonunion, and fracture-related infection (FRI) were investigated. RESULTS: Demographic data were not different between the two groups. Coronal plane alignment was 0.17 ± 4.23 in the plate group and -0.48 ± 4.17 in the intramedullary nail group (p = 0.637). Sagittal plane alignment was -0.13 ± 5.20 in the plate group and -1.50 ± 4.01 in the suprapatellar intramedullary nail group (p = 0.313). Coronal and sagittal malalignment recorded equal results: (p > 0.99), FRI (p = 0.602), nonunion and union times recorded (p = 0.656) and (p = 0.683, 0.829), respectively, and showed no significant difference between the two groups. CONCLUSION: Suprapatellar intramedullary nailing with screw fixation had similar surgical outcomes with minimally invasive locking plate fixation in ipsilateral tibial plateau and shaft fractures in terms of union rate, union time, alignment, and complication rate. Thus, frequent use of intramedullary nailing combined with screw fixation is anticipated in patients with ipsilateral tibial plateau and shaft fractures when the soft tissue condition is not desirable. LEVEL OF EVIDENCE: Level III.

A comparative study of locking plate combined with minimally invasive plate osteosynthesis and intramedullary nail fixation in the treatment of Neer classification of two-part and three-part fractures of the proximal humerus.

OBJECTIVE: To compare the clinical efficacy of the minimally invasive locking plate technique (Philos plate) and interlocking intramedullary nailing technique (TRIGEN intramedullary nail) in the treatment of Neer two-part and three-part proximal humeral fractures. METHODS AND MATERIALS: The clinical data of 60 patients with Neer two-part and three-part proximal humerus fractures admitted to the hospital from April 2017 to April 2021 were retrospectively analyzed. Thirty-two patients were treated with the minimally invasive locking plate technique (minimally invasive plate group), and 28 patients were treated with the interlocking intramedullary nailing technique (intramedullary nail group). The operation time, intraoperative blood loss, incision length, fracture healing time, and postoperative complications were compared between the two groups. The ASES score and Constant-Murley score were used to evaluate the shoulder joint function of the two groups one year after surgery. RESULTS: All 60 patients were followed up for 12 to 24 months, with an average of 16 months. There was no significant difference in operation time, intraoperative blood loss, incision length, or fracture healing time between the two groups (P > 0.05). The incidence of postoperative complications in the intramedullary nail group was significantly lower than that in the minimally invasive steel plate group, and the difference between the groups was statistically significant (P < 0.05). There was no significant difference in the ASES score or Constant-Murley score between the two groups one year after surgery (P > 0.05). CONCLUSION: The use of the minimally invasive locking plate technique and interlocking intramedullary nailing technique in the treatment of Neer two-part and three-part proximal humerus fractures has the advantages of a small incision, less blood loss, and a high fracture healing rate, and both can achieve satisfactory clinical effects. The internal nail technique is more convenient than the minimally invasive locking plate technique in controlling postoperative complications.

A comparison of outcomes of locking versus non-locking plate fixation for the distal fibula fractures: a systematic review and meta-analysis.

PURPOSE: A locking plate (LP) or non-locking plate (NLP) can be used for distal fibula fracture fixation. However, the advantages of LP over NLP in patients with distal fibula fractures are not clear. In terms of indications, the role of the two plates probably differs; however, to draw comparative conclusions, we conceptualized this systematic review and meta-analysis of studies that directly compared the two plates, wherein both groups' indications and baseline parameters were similar. METHODS: An electronic literature search was performed using PubMed/Medline, Embase, Scopus, and Cochrane Library databases for studies comparing the LP versus NLP fixation for the lateral malleolus fracture. A total of 18 studies were included in qualitative and quantitative analysis. A subgroup analysis was performed for patients aged < 55 years and patients aged > 55 years. The statistical analysis was performed by Review Manager Software version 5.4.1. RESULTS: A meta-analysis of 4243 fractures was performed across 18 studies. The rate of fracture union and overall complication rates did not differ between the two fixation groups with an OR of 0.71 (95% CI 0.26, 1.96, p = 0.51 and 1.11 (95% CI 0.84, 1.47, p = 0.47, respectively. There is no difference in the reoperation rate due to minor or major complications between the two groups. There was no difference in functional outcome (MD -0.85, with 95% CI -5.63, 3.93, p = 0.73), but NLP has a shorter surgical duration (MD 3.0, with 95% CI 0.26, 5.75, p = 0.03). A leave-one-out sensitivity analysis performed for overall complications affected the final outcome of the meta-analysis. CONCLUSION: This meta-analysis demonstrates no clear benefit in selecting LP over NLP for the fixation of lateral malleolus fractures.

Volar locking and angular stability plate for treatment of comminuted scaphoid fractures: a case series of 44 cases.

BACKGROUND: The primary method employed worldwide for the treatment of scaphoid fractures is screw fixation. However, in unstable and comminuted fractures, percutaneous fixation could produce complications due to technical challenges, such as improper axis positioning, inaccurate screw length measurement, intra-articular screw penetration, and impingement. Alternative open approaches for the surgical management of scaphoid fractures have been proposed, and in recent years, a new specific volar locking plate for the treatment of scaphoid fractures has been developed. This study aims to present the outcomes of this technique applied to 44 patients with unstable and comminuted fractures of the scaphoid. AIMS: The purpose of the study is to verify the effectiveness of the volar plate in the treatment of comminuted scaphoid fractures and the necessity for plate removal when consolidation has occurred. METHODS: Between January 2021 and March 2023, a specific volar locking plate for the treatment of scaphoid fractures was used in 44 patients. A retrospective study was conducted involving all patients, consisting of continuous clinical and radiographic assessments, functional evaluations (using QuickDASH and MHQ), and patient satisfaction surveys. RESULTS: All patients achieved clinical and radiographic recovery. However, the plate can impinge with nearby structures and should be removed once the fracture is consolidated. After plate removal, further improvement in range of motion was observed. CONCLUSION: The plate and screws system is a viable and appropriate method of osteosynthesis in the treatment of unstable and comminuted recent fractures occurring in the middle third of the carpal scaphoid.

Efficacy of intramedullary bridge fixation for midshaft clavicle fractures: a retrospective analysis of a novel technique.

BACKGROUND: The aim of this study was to explore the efficacy of a novel intramedullary fixation technique using the ortho-bridge system (OBS) for midshaft clavicle fractures. METHODS: A total of 63 patients were included in this study: 35 underwent plate internal fixation (LP group) and 28 underwent OBS intramedullary fixation (OBS group). Surgical time, intraoperative blood loss, incision length, fracture healing time, removal of the internal fixation agent, visual analog scale (VAS) score for shoulder pain, Constant-Murley shoulder score and complication occurrence were compared between the two groups. RESULTS: Preoperative general data, such as sex, age and fracture type, were not significantly different between the two groups (P > 0.05). However, the OBS group exhibited better outcomes than the LP group exhibited in terms of surgical time, intraoperative blood loss and total incision length (P < 0.05). Additionally, the OBS group exhibited a significantly shorter fracture healing time and internal-fixation removal time than the LP group exhibited (P < 0.05). The VAS scores on postoperative day 1, week 1, month 1 and month 3 were lower in the OBS group than in the LP group (P < 0.05). Furthermore, the Constant-Murley shoulder scores at 1, 3, and 6 months postoperatively were higher in the OBS group than in the LP group (P < 0.05), with no significant difference at 1 year after surgery (P > 0.05). None of the patients in the OBS group experienced scarring of the surgical incision, and 6 patients in the LP group experienced scarring of the surgical incision. Finally, the complication incidence in the OBS group was lower than that in the LP group. CONCLUSION: For midshaft clavicle fractures, OBS intramedullary fixation is better than locking-plate internal fixation because it led to less trauma, a faster recovery, better efficacy, and better esthetic outcomes and comfort. Therefore, this technique may have potential as a novel treatment for midshaft clavicle fractures. LEVEL OF EVIDENCE: III, retrospective observational study.

Do locking plugs improve implant strength? Biomechanical comparison of polyaxial locking constructs with and without locking plugs in a fracture gap model.

BACKGROUND: The objective of this study was to investigate the effects of locking plugs and the biomechanical properties of a 3.5 mm 8-hole polyaxial locking plate in a fracture gap model. Our hypothesis was that locking plugs would increase the strength and stiffness of the construct. Twelve 3.5 mm 8-hole plates were used to evaluate two different construct designs (with locking plugs vs. without locking plugs) with validated bone substitutes in a 25 mm bridging osteosynthesis gap model. Each construct was subjected to a single cycle four-point bending load to failure using a servo-hydraulic testing machine. Bending stiffness, bending strength, and bending structural stiffness were calculated and compared using an unpaired Student´s t-test. RESULTS: The plating construct with locking plugs did not show any significant increase in terms of bending stiffness, bending strength, and bending structural stiffness compared to plating construct without locking plugs in a 25 mm gap fracture model during a single cycle four-point bending. CONCLUSIONS: Under the conditions tested, filling empty plate holes with locking plugs in bridging osteosynthesis does not increase stiffness or strength of the plate-bone construct.

Comparison of the ALPS and PHILOS plating systems in proximal humeral fracture fixation - a retrospective study.

BACKGROUND: Open reduction and plate osteosynthesis are considered as a successful technique for the treatment of proximal humerus fracture (PHF) despite high complication rates. The objective of our study was to review the clinical outcome and complications of the Anatomic Locking Plate System (ALPS) and compare it to the Proximal Humeral Internal Locking System (PHILOS). Our hypothesis was that ranges of motion (ROM) were superior and complication rates were lower with ALPS. METHODS: Twenty patients treated with ALPS for PHF were retrospectively compared to 27 patients treated with PHILOS. Union, ROM and complications were clinically and radiologically assessed at 6 weeks, 3, 6, 12 and 18-24 months post-operatively. RESULTS: Mean age was 52 ± 14 in the ALPS group and 58 ± 13 in the PHILOS group. Last follow-ups were conducted at a mean of 20.6 ± 4.8 months. Mean shoulder abduction was superior with ALPS by 14° (p-value = 0.036), 15° (p-value = 0.049), and 15° (p-value = 0.049) at 3, 6, and 12 months respectively. Mean shoulder external rotation was superior with ALPS by 11° (p-value = 0.032), 15° (p-value = 0.010) and 12° (p-value = 0.016) at 6 weeks, 3 and 6 months respectively. At the end of the follow-up, ROM remained better with ALPS, but not significantly. Complication rates over 21 months reached 20% with ALPS and 48% with PHILOS (p-value = 0.045). Implant removal rates reached 10% with ALPS and 37% with PHILOS (p-value = 0.036). Avascular necrosis was the only cause for hardware removal in the ALPS group. CONCLUSION: The ALPS group showed better clinical outcomes with faster recovery in abduction and external rotation, although no difference in ROM remained after 21 months. Additionally, the complications rate was lower at last follow up. In our experience, the ALPS plating system is an effective management option in some PHF.

Long locking plate combined with locking attachment plate in patients with periprosthetic femoral fracture around ipsilateral stem after total knee arthroplasty.

BACKGROUND: The purpose of this study was to introduce the surgical technique using long locking plate and locking attachment plate (LAP) in patient with periprosthetic femoral fracture around ipsilateral stem after total knee arthroplasty (TKA). Moreover, we sought to investigate the outcomes of this fixation technique and to propose a new subtype in the existing classification of periprosthetic femoral fractures. METHODS: From January 2013 to January 2022, thirty-four consecutive periprosthetic femoral fractures around ipsilateral stem following TKA with minimum 1-year follow-up were enrolled in this study. Most cases were fixed with long-locking plate and LAP using the MIPO technique. For subgroup analysis, we classified patients with stemmed hip implant (group H) and stemmed knee implant (group K). Bone union, American Knee Society Score (AKSS) scale, Knee Injury and Osteoarthritis Outcome Score for Joint Replacement, the Western Ontario and McMaster Universities Osteoarthritis Index for pain and function, and range of motion were investigated. RESULTS: The number of group H and K were 24 patients (70.6%) and 10 patients (29.4%), respectively. The mean age at operation was 71.5 years (range, 65‒85 years), and the mean follow-up period was 27.5 months (range, 12‒72 months). Bone union was confirmed radiographically in all patients, and the mean union time was 4.9 months (range, 3.5‒6 months). There were no significant differences in radiographic and clinical outcomes between the groups. CONCLUSIONS: Long-locking plate combined with LAP showed favorable radiographic and clinical outcomes in patients with periprosthetic femoral fracture around ipsilateral stem after TKA. LEVEL OF EVIDENCE: Level IV, Retrospective Case Series.

Locking plate fixation versus intramedullary nail fixation for the treatment of multifragmentary proximal humerus fractures (OTA/AO type 11C): a preliminary comparison of clinical efficacy.

BACKGROUND: This study aimed to compare the clinical efficacy of locking plate and intramedullary nail fixations in the treatment of patients with OTA/AO type 11C proximal humerus fractures. METHODS: We retrospectively analyzed the data of patients with OTA/AO type 11C1.1 and 11C3.1 proximal humerus fractures who underwent surgery at our institution from June 2012 to June 2017. Perioperative indicators, postoperative morphological parameters of the proximal humerus, and Constant-Murley scores were evaluated and compared. RESULTS: Sixty-eight patients with OTA/AO type 11C1.1 and 11C3.1 proximal humerus fractures were enrolled in this study. Overall, 35 patients underwent open reduction and plate screw internal fixation, and 33 patients underwent limited open reduction and locking of the proximal humerus with intramedullary nail internal fixation. The total cohort had a mean follow-up duration of 17.8 months. The mean operation time of the locking plate group was significantly longer than that of the intramedullary nail group (P < 0.05), while the mean bleeding volume was significantly higher in the locking plate group than that in the intramedullary nail group (P < 0.05). The initial neck-shaft angles, final neck-shaft angles, forward flexion ranges, or Constant-Murley scores did not show significant differences between the two groups (P > 0.05). Complications, including screw penetrations, acromion impingement syndrome, infection, and aseptic necrosis of the humeral head, occurred in 8 patients (8/35, 22.8%) in the locking plate group and 5 patients in the intramedullary nail group (5/33, 15.1%; including malunion and acromion impingement syndrome), with no significant difference between the groups (P > 0.05). CONCLUSIONS: Similar satisfactory functional results can be achieved with locking plates and intramedullary nailing for OTA/AO type 11C1.1 and 11C3.1 proximal humerus fractures, with no significant difference in the number of complications between these two techniques. However, intramedullary nailing has advantages over locking plates for OTA/AO type 11C1.1 and 11C3.1 proximal humerus fractures in terms of operation time and bleeding volume.

Higher Soong grade predicts flexor tendon issues after volar plating of distal radius fractures - a retrospective cohort study.

BACKGROUND AND PURPOSE: Soong classification is used to estimate volar locking plate prominence and evaluate the risk for flexor tendon ruptures after surgical treatment of distal radius fractures (DRFs). However, the scientific community has questioned the Soong classification due to lacking evidence. Therefore, this study aimed to evaluate the accuracy of Soong grading as a predictor for flexor tendon issues and plate removal. PATIENTS AND METHODS: We performed a retrospective single-center review of adult distal radius fracture patients treated with a volar locking plate between 2009 and 2019. In total, 2779 patients were included in the study. The primary outcome was a flexor tendon issue (flexor tendon rupture, tendinitis, or flexor irritation), whereas plate removal was a secondary outcome. Using Soong grade 0 as a reference, we used univariable and multivariable logistic regression to calculate odds ratios (OR) with 95% confidence intervals (CI) for flexor tendon issues and plate removal. RESULTS: In total, 756 (27%) patients were graded as Soong 0, 1679 (60%) Soong 1, and 344 (12%) Soong 2, respectively. There were 32 (1.2%) patients with flexor tendon issues, of which 4 were flexor tendon ruptures, 8 tendinitises, and 20 flexor irritations. The adjusted OR for flexor tendon issues was 4.4 (CI 1.1-39.7) for Soong grade 1 and 9.7 (CI 2.2-91.1) for Soong grade 2. The plate was removed from 167 (6.0%) patients. Soong grade 1 had a univariable OR of 1.8 (CI 1.2-2.8) for plate removal, and Soong grade 2 had an OR of 3.5. (CI 2.1-5.8), respectively. CONCLUSION: Flexor tendon ruptures are rare complications after the volar plating of DRFs. A higher Soong grade is a risk factor for flexor tendon issues and plate removal. TRIAL REGISTRATION: The trial was retrospectively registered.

Low Young's Modulus TiNbSn Alloy Locking Plates Accelerate Osteosynthesis in Rabbit Tibiae.

A new beta TiNbSn alloy with a low Young's modulus of approximately 40 GPa has been developed to resolve the stress shielding by Young's modulus divergence. In this study, the efficacy of TiNbSn alloy locking plates on bone repair is compared to that of commercially pure titanium (CP-Ti). The TiNbSn alloy and CP-Ti, which have Young's moduli of 49.1 GPa and 107 GPa, respectively, were compared. Male Japanese white rabbits were anesthetized, and osteotomy and osteosynthesis with locking plates were performed on the right tibia. The bone repair was assessed using micro-computed tomography (CT), histomorphometry, immunohistochemistry, and mechanical testing. Micro-CT, histomorphometry, immunohistochemistry, and mechanical testing were performed four weeks after osteotomy. Six weeks after surgery, micro-CT and mechanical testing were performed. Micro-CT analysis at four weeks after surgery showed that the intramedullary fracture callus in the TiNbSn alloy group had more bone volume and numerous bridging structures compared to the CP-Ti group (CP-Ti vs. TiNbSn alloy, 34.3 ± 13.1 mm3 vs. 61.3 ± 19.6 mm3, p = 0.02; mean ± standard deviation). At four weeks post-osteotomy, the healed tibia showed significantly higher strength in the TiNbSn alloy group compared with CP-Ti (CP-Ti vs. TiNbSn alloy, 81.3 ± 31.2 N vs. 133.7 ± 46.6 N, p = 0.04). TiNbSn alloy locking plates had a more positive impact on bone formation and bone strength restoration than the CP-Ti locking plates during the early phase of bone healing.

Treatment of comminuted metaphyseal distal femoral fractures with a micromotion-balancing osteosynthesis: an animal study.

BACKGROUND: Locking plates are commonly used in the treatment of comminuted metaphyseal distal femoral fractures. However, locking plates form a strong structure and promote asymmetrical callus formation, which is not conducive for rapid fracture healing and may increase fracture risk. To overcome this, we designed a micromotion-balancing fixation system based on locking plates. METHODS: Six healthy pigs (Bama miniature pigs) were used to establish a model of bilateral comminuted distal femoral fracture (AO/ASIF: 33-C2). Standard drilling was performed on one of each pig's hind limbs (control group), whereas eccentric drilling was performed on the other hind limb (experimental group). Both femurs were fixed with a 3-hole locking compression plate using 5-mm-diameter screws. At 12 postoperative weeks, all pigs were euthanized and the femurs with compression plates were radiographically examined. The level of fracture healing and loosening/internal fixation failure were recorded. Bone mineral density, number of trabeculae, trabecular morphology, and calcification precipitations were assessed. RESULTS: All pigs survived, and the fractures healed. No complications related to fracture healing, such as infection and internal fixation failure, were noted. The bone mineral density of the near and far cortical calli, number of the near and far cortical callus trabeculae, and difference in bone mineral density between the near and far cortical calli in the experimental group were significantly higher than those in the control group (p < 0.01). However, the difference in the number of trabeculae between the near and far cortical calli was significantly lower in the experimental group than in the control group (p < 0.01). CONCLUSION: This newly designed system provides stable fixation for comminuted distal femoral fracture, increases the overall strain at the fracture site, and balances the strains at the near and far cortices to achieve uniform callus growth and fracture healing.

Combined approach versus single Henry approach for fixation of die-punch distal radius fractures: a retrospective study.

BACKGROUND: Distal radius fracture (DRF) is one of the most common orthopaedic-related traumas. DRF patients with die-punch fractures have a higher risk of loss of reduction, poorer functional outcomes, and increased risk of complications even after open reduction and internal fixation (ORIF). According to the three-column theory, the lunate fossa is an important part of the intermediate column for load bearing. When the distal radius fracture involves the lunate fossa, adequate anatomical reduction can have an important impact on the prognosis of wrist function. Herein, we used the combined volar and dorsal approach, and the dorsal approach was used to assist in bone grafting or dorsal plate fixation in reducing fractures. We compare the combined approach versus the Henry approach for the fixation of die-punch distal radius fractures. METHODS: We reviewed patients who were admitted for surgery for die-punch fractures from January 2016 to June 2021. The patients were followed-up after surgery to measure and evaluate their Gartland-Werley wrist score, wrist range of motion (ROM), and follow-up imaging data. RESULTS: There were 21 patients in the volar locking plate (VLP) group and 10 patients in the combined approach group. The majority of fractures in the VLP and combined approach groups were AO B and C fractures, respectively. The cause of injury and AO fracture classification showed significant differences between the two groups, and there was no difference in age or sex between the two groups. There was no significant difference in ROM between the two groups, but the VLP group presented a better Gartland-Werley score and volar tilt angle, and the combined group presented better maintenance in radial height and articular congruity. CONCLUSIONS: Reduction through the combined palmar and dorsal approach supplemented by bone grafting or dorsal plate fixation is an effective method for the treatment of die-punch distal radius fractures, which provides a new option for the treatment of die-punch fractures.

The Effect of an Intraoperative Real-Time Counter on Radiation Exposure Events During Operative Treatment of Distal Radius Fractures.

PURPOSE: Occupational radiation exposure can have adverse health consequences for surgeons. The purpose of this study was to determine if utilization of an intraoperative, real-time radiograph counter results in decreased radiation exposure events (REEs) during open reduction and internal fixation (ORIF) of distal radius fractures (DRFs). METHODS: We reviewed all cases of isolated ORIF DRFs performed at a single center from January 2021 to February 2023. All cases performed on or after January 1, 2022 used an intraoperative radiograph counter, referred to as a "shot-clock" (SC) group. Cases prior to this date were performed without a SC and served as a control group (NoSC group). Baseline demographics, fracture, and surgical characteristics were recorded. Final intraoperative radiographs were reviewed to record reduction parameters (radial inclination, volar tilt, and ulnar variance). REEs, fluoroscopy exposure times, and total radiation doses milligray (mGy) were compared between groups. RESULTS: A total of 160 ORIF DRF cases were included in the NoSC group, and 135 were included in the SC group. The NoSC group had significantly more extra-articular fractures compared with the SC group. Reduction parameters after ORIF were similar between groups. The mean number of REEs decreased by 48% in the SC group. Cases performed with the SC group had significantly lower total radiation doses (0.8 vs 0.5 mGy) and radiation exposure times (41.9 vs 24.2 seconds). Mean operative times also decreased for the SC group (70 minutes) compared with that for the NoSC group (81 minutes). CONCLUSIONS: A real-time intraoperative radiograph counter was associated with decreased REEs, exposure times, and total radiation doses during ORIF DRFs. Cases performed with a SC had significantly shorter operative times without compromising reduction quality. Using an intraoperative SC counter during cases requiring fluoroscopy may aid in decreasing radiation exposure, which serves as an occupational hazard for hand and upper-extremity surgeons. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic II.

Risk of Volar Locking Plate Removal After Distal Radius Fractures: Time-to-Event Analysis.

PURPOSE: The primary purpose of this study was to describe the rate of volar locking plate (VLP) removal after distal radius fracture and how long it takes for the risk of VLP removal to stabilize. The secondary purpose was to describe the reasons for VLP removal and analyze the relationship between it and the Soong index. METHODS: This was a single-center retrospective cohort study. Patients aged >18 years with distal radius fracture who underwent VLP fixation were included. Hardware removal, time until VLP removal, and the primary reason for removal were recorded. The implant prominence was measured as described by Soong. We used Kaplan-Meier curves and risk tables to describe the risk of VLP removal and variation over time. Multivariable logistic regression was used to assess the relationship between Soong grade and VLP removal. RESULTS: A total of 313 wrists were included. There were 35 cases of VLP removal, with an overall incidence of 11.2% at 15 years of follow-up. The incidence rate was 1.2 per 100 individuals per year for the entire cohort. The risk of VLP removal decreased from 6.2% in the first postoperative year to 1.7% in the second year and 1.4% in the third year. Beyond that, the rate remained <1% per year throughout the follow-up period. The median hardware removal time was 11 months. The main reasons for VLP removal were tenosynovitis, implant-associated pain, and screw protrusion. We found no association between Soong grade and VLP removal. CONCLUSIONS: Volar locking plate removal after distal radius fracture was more common in the first year after surgery and remained notable until the third year. Regular monitoring and patient education to assess possible complications related to hardware are important during this period. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Changes in Distance Between the Flexor Pollicis Longus Tendon and Volar Locking Plate: An Ultrasonographic Study.

PURPOSE: Flexor pollicis longus rupture is a major complication after volar locking plate fixation of distal radius fractures. Although the distance between the flexor pollicis longus tendon and the plate (plate-tendon distance) measured by ultrasonography is used to predict tendon rupture risk, the timing of the ultrasonography can affect the measurements. Therefore, this study aimed to analyze the chronological change of the plate-tendon distance between the tendon and plate. METHODS: A total of 166 wrists underwent the plate-tendon distance measurement twice or more times within 15 months after surgery. Longitudinal ultrasonography scans with the wrist in a neutral position and the thumb flexed were used to measure the plate-tendon distance. The plate-tendon distances at 0-5 months, 5-10 months, and 10-15 months after surgery were compared. A multiple linear regression analysis was performed to evaluate the influence of the interval between surgery and examination, Soong grade, and plate type on the plate-tendon distance. RESULTS: The plate-tendon distance decreased as the interval between surgery and examination increased. The plate-tendon distance was an average of 2.0 ± 1.1 mm, 1.4 ± 0.9 mm, and 1.2 ± 0.9 mm at 0-5 months, 5-10 months, and 10-15 months after surgery, respectively. Significant differences were observed between 0-5 months and 5-10 months and between 5-10 months and 10-15 months after surgery. A multiple linear regression showed that significant predictors of the plate-tendon distance were the intervals between surgery and examination and Soong grade. CONCLUSIONS: The plate-tendon distance decreased as the time since surgery increased. When ultrasonography is used for the assessment of tendon rupture risk, it should be considered that the plate-tendon distance decreases as the interval between the surgery and examination increases. TYPE OF STUDY/LEVEL OF EVIDENCE: Prognosis IV.