Polyvinyl Chloride-Based Luminescent Downshifting Film with High Flame Retardancy and Excellent UV Resistance for Silicon Solar Cells.

Solar power generation, as a clean energy source, has significant potential for development. This work reports the recent efforts to address the challenge of low power conversion efficiency in photovoltaic devices by proposing the fabrication of a luminescence downshifting layer using polyvinyl chloride (PVC) with added fluorescent dots to enhance light utilization. A photoluminescent microsphere (HCPAM) is synthesized by cross-linking hexachlorocyclotriphosphazene, 2-iminobenzimidazoline, and polyethyleneimine. Low addition of HCPAM can improve the fire safety of PVC films, raising the limiting oxygen index of PVC to 32.4% and reducing the total heat release and smoke production rate values by 14.5% and 42.9%, respectively. Additionally, modified PVC film remains a transparency of 88% and shows down-conversion light properties. When the PVC+1%HCPAM film is applied to the solar cell, the short-circuit current density increases from 42.3 to 43.8 mA cm-2, resulting in a 7.0% enhancement in power conversion efficiency. HCPAM also effectively delays the photooxidative aging of PVC, particularly at a 3% content, maintaining the surface morphology and optical properties of PVC samples during ultraviolet aging. This study offers an innovative strategy to enhance the fire and UV-resistant performance of PVC films and expand their applications in protecting and efficiently utilizing photovoltaic devices.

Sustainable Epoxy Composites with UV Resistance Based on New Kraft Lignin Coatings.

Currently, the composite industry is focusing on more environmentally friendly resources in order to generate a new range of biobased materials. In this manuscript, we present a new work using lignocellulosic wastes from the paper industry to incorporate into biobased epoxy systems. The manufactured materials were composed of kraft lignin, glass fiber, and a sustainable epoxy system, obtaining a 40% biobased content. Using a vacuum infusion process, we fabricated the composites and analyzed their mechanical and UV resistance properties. The findings reveal a significant correlation between the lignin content and flexural modulus and strength, showing an increase of 69% in the flexural modulus and 134% in the flexural strength with the presence of 5% of lignin content. Moreover, it is necessary to highlight that the presence of synthesized lignin inhibits the UV degradation of the biobased epoxy coating. We propose that the use of lignocellulosic-based wastes could improve the mechanical properties and generate UV resistance in the composite materials.

Heat-Insulated Regenerated Fibers with UV Resistance: Silk Fibroin/Al2O3 Nanoparticles.

The various wastes generated by silkworm silk textiles that are no longer in use are increasing, which is causing considerable waste and contamination. This issue has attracted widespread attention in countries that use a lot of silk. Therefore, enhancing the mechanical properties of regenerated silk fibroin (RSF) and enriching the function of silk are important directions to expand the comprehensive utilization of silk products. In this paper, the preparation of RSF/Al2O3 nanoparticles (NPs) hybrid fiber with different Al2O3 NPs contents by wet spinning and its novel performance are reported. It was found that the RSF/Al2O3 NPs hybrid fiber was a multifunctional fiber material with thermal insulation and UV resistance. Natural light tests showed that the temperature rise rate of RSF/Al2O3 NPs hybrid fibers was slower than that of RSF fibers, and the average temperature rose from 29.1 °C to about 35.4 °C in 15 min, while RSF fibers could rise to about 40.1 °C. UV absorption tests showed that the hybrid fiber was resistant to UV radiation. Furthermore, the addition of Al2O3 NPs may improve the mechanical properties of the hybrid fibers. This was because the blending of Al2O3 NPs promoted the self-assembly of ß-sheets in the RSF reaction mixture in a dose-dependent manner, which was manifested as the RSF/Al2O3 NPs hybrid fibers had more ß-sheets, crystallinity, and a smaller crystal size. In addition, RSF/Al2O3 NPs hybrid fibers had good biocompatibility and durability in micro-alkaline sweat environments. The above performance makes the RSF/Al2O3 NPs hybrid fibers promising candidates for application in heat-insulating and UV-resistant fabrics as well as military clothing.

Eco-Friendly Waterborne Polyurethane Coating Modified with Ethylenediamine-Functionalized Graphene Oxide for Enhanced Anticorrosion Performance.

This study explores the potential of graphene oxide (GO) as an additive in waterborne polyurethane (WPU) resins to create eco-friendly coatings with enhanced anticorrosive properties. Traditionally, WPU's hydrophilic nature has limited its use in corrosion-resistant coatings. We investigate the impact of incorporating various GO concentrations (0.01, 0.1, and 1.3 wt%) and functionalizing GO with ethylenediamine (EDA) on the development of anticorrosive coatings for carbon steel. It was observed, by potentiodynamic polarization analysis in a 3.5% NaCl solution, that the low GO content in the WPU matrix significantly improved anticorrosion properties, with the 0.01 wt% GO-EDA formulation showing exceptional performance, high Ecorr (-117.82 mV), low icorr (3.70 × 10-9 A cm-2), and an inhibition corrosion efficiency (η) of 99.60%. Raman imaging mappings revealed that excessive GO content led to agglomeration, creating pathways for corrosive species. In UV/condensation tests, the 0.01 wt% GO-EDA coating exhibited the most promising results, with minimal corrosion products compared to pristine WPU. The large lateral dimensions of GO sheets and the cross-linking facilitated by EDA enhanced the interfacial properties and dispersion within the WPU matrix, resulting in superior barrier properties and anticorrosion performance. This advancement underscores the potential of GO-based coatings for environmentally friendly corrosion protection.

Fully Aromatic Self-Assembled Hole-Selective Layer toward Efficient Inverted Wide-Bandgap Perovskite Solar Cells with Ultraviolet Resistance.

Ultraviolet-induced degradation has emerged as a critical stability concern impeding the widespread adoption of perovskite solar cells (PSCs), particularly in the context of phase-unstable wide-band gap perovskite films. This study introduces a novel approach by employing a fully aromatic carbazole-based self-assembled monolayer, denoted as (4-(3,6-dimethoxy-9H-carbazol-9-yl)phenyl)phosphonic acid (MeO-PhPACz), as a hole-selective layer (HSL) in inverted wide-band gap PSCs. Incorporating a conjugated linker plays a pivotal role in promoting the formation of a dense and highly ordered HSL on substrates, facilitating subsequent perovskite interfacial interactions, and fostering the growth of uniform perovskite films. The high-quality film could effectively suppress interfacial non-radiative recombination, improving hole extraction/transport efficiency. Through these advancements, the optimized wide-band gap PSCs, featuring a band gap of 1.68 eV, attain an impressive power conversion efficiency (PCE) of 21.10 %. Remarkably, MeO-PhPACz demonstrates inherent UV resistance and heightened UV absorption capabilities, substantially improving UV resistance for the targeted PSCs. This characteristic holds significance for the feasibility of large-scale outdoor applications.

Transforming Element Sulfur to High Performance Closed-Loop Recyclable Polymer via Proton Transfer Enabled Anionic Hybrid Copolymerization.

The utilization of sulfur has been a global issue. Copolymerization of element sulfur (S8) with other monomers is a promising route to convert it to useful materials but is limited by the comonomers. Here, we report anionic hybrid copolymerization of S8 with acrylate and epoxide at room temperature, where S8 does not copolymerize with epoxide in the absence of acrylate. Yet, the proton transfer from the methyne in acrylate to the oxygen anion enables the ring-opening of the cyclic comonomer and hence the copolymerization. The cyclic comonomers can be expanded to lactone and cyclic carbonate. Specifically, the copolymer of S8 with bisphenl A diglycidyl ether and diacrylate displays mechanical properties comparable to those of most common plastics, namely, it has ultimate tensile strength as high as 60.8 MPa and Young's modulus up to 680 MPa. It also exhibits high UV resistance and good transparency. Particularly, it has excellent UV-induced self-healing, reprocessability and closed-loop recyclability due to the abundant dynamic S-S bonds and ester groups. This study provides an efficient strategy to turn element sulfur into closed-loop recyclable polymer with high mechanical and optical performances.

Whole Genome Resequencing Revealed the Effect of Helicase yqhH Gene on Regulating Bacillus thuringiensis LLP29 against Ultraviolet Radiation Stress.

Bacillus thuringiensis (Bt) is a widely used microbial pesticide. However, its duration of effectiveness is greatly shortened due to the irradiation of ultraviolet rays, which seriously hinders the application of Bt preparations. Therefore, it is of great importance to study the resistance mechanism of Bt to UV at the molecular level to improve the UV-resistance of Bt strains. In order to know the functional genes in the UV resistance, the genome of UV-induced mutant Bt LLP29-M19 was re-sequenced and compared with the original strain Bt LLP29. It was shown that there were 1318 SNPs, 31 InDels, and 206 SV between the mutant strain and the original strain Bt LLP29 after UV irradiation, which were then analyzed for gene annotation. Additionally, a mutated gene named yqhH, a member of helicase superfamily II, was detected as an important candidate. Then, yqhH was expressed and purified successfully. Through the result of the enzymatic activity in vitro, yqhH was found to have ATP hydrolase and helicase activities. In order to further verify its function, the yqhH gene was knocked out and complemented by homologous recombinant gene knockout technology. The survival rate of the knockout mutant strain Bt LLP29-ΔyqhH was significantly lower than that of the original strain Bt LLP29 and the back-complemented strain Bt LLP29-ΔyqhH-R after treated with UV. Meanwhile, the total helicase activity was not significantly different on whether Bt carried yqhH or not. All of these greatly enrich important molecular mechanisms of Bt when it is in UV stress.

The Photothermal Conversion and UV Resistance of Silk Fabrics Being Achieved through Surface Modification with C@SiO2 Nanoparticles.

With the improvement in people's living standards, the development and application of smart textiles are receiving increasing attention. In this study, a carbon nanosurface was successfully coated with a SiO2 layer to form C@SiO2 nanomaterials, which improved the dispersion of carbon nanomaterials in an aqueous solution and enhanced the absorption of light by the carbon nanoparticles. C@SiO2 nanoparticles were coupled on the surface of silk fabric with the silane coupling agent KH570 to form C@SiO2 nanosilk fabric. The silk fabric that was subjected to such surface modification was endowed with a special photothermal function. The results obtained with scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), and infrared spectroscopy (FTIR) showed that C@SiO2 nanoparticles were successfully modified on the surface of the silk fabric. In addition, under the irradiation of near-infrared light with a power of 20 W and a wavelength of 808 nm, the C@SiO2 nanosilk fabric experienced rapid warming from 23 °C to 60 °C within 30 s. After subjecting the functional fabric to hundreds of photothermal experiments and multiple washes, the photothermal efficiency remained largely unchanged and proved to be durable and stable. In addition, the thermogravimetric (TG) analysis results showed that the C@SiO2 nanoparticles contributed to the thermal stability of the silk fabric. The UV transmittance results indicated that C@SiO2 nanofabric is UV-resistant. The silk modification method developed in this study is low-cost, efficient, and environmentally friendly. It has some prospects for future applications in the textile industry.

Dual Photo-Responsive Diphenylacetylene Enables PET In-Situ Upcycling with Reverse Enhanced UV-Resistance and Strength.

A novel in situ chemical upcycling strategy for plastic waste is proposed by the customized diphenylacetylene monomer with dual photo-response. That is, diphenylacetylene reactive monomers are in situ inserted into the macromolecular chain of polyethylene terephthalate (PET) plastics/fibers through one-pot transesterification of slight-depolymerization and re-polymerization. On the one hand, the diphenylacetylene group absorbs short-wave high-energy UV rays and then releases long-wave low-energy harmless fluorescence. On the other hand, the UV-induced photo-crosslinking reaction among diphenylacetylene groups produces extended π-conjugated structure, resulting in a red-shift (due to decreased HOMO-LUMO separation) in the UV absorption band and locked crosslink points between PET chains. Therefore, with increasing UV exposure time, the upcycled PET plastics exhibit reverse enhanced UV resistance and mechanical strength (superior to original performance), instead of serious UV-photodegradation and damaged performance. This upcycling strategy at oligomer-scale not only provides a new idea for traditional plastic recycling, but also solves the common problem of gradual degradation of polymer performance during use.

Mechanisms of UV-B light-induced photoreceptor UVR8 nuclear localization dynamics.

Light regulates the subcellular localization of plant photoreceptors, a key step in light signaling. Ultraviolet-B radiation (UV-B) induces the plant photoreceptor UV RESISTANCE LOCUS 8 (UVR8) nuclear accumulation, where it regulates photomorphogenesis. However, the molecular mechanism for the UV-B-regulated UVR8 nuclear localization dynamics is unknown. With fluorescence recovery after photobleaching (FRAP), cell fractionation followed by immunoblotting and co-immunoprecipitation (Co-IP) assays we tested the function of UVR8-interacting proteins including CONSTITUTIVELY PHOTOMORPHOGENIC 1 (COP1), REPRESSOR OF UV-B PHOTOMORPHOGENESIS 1 (RUP1) and RUP2 in the regulation of UVR8 nuclear dynamics in Arabidopsis thaliana. We showed that UV-B-induced rapid UVR8 nuclear translocation is independent of COP1, which previously was shown to be required for UV-B-induced UVR8 nuclear accumulation. Instead, we provide evidence that the UV-B-induced UVR8 homodimer-to-monomer photo-switch and the concurrent size reduction of UVR8 enables its monomer nuclear translocation, most likely via free diffusion. Nuclear COP1 interacts with UV-B-activated UVR8 monomer, thereby promoting UVR8 nuclear retention. Conversely, RUP1and RUP2, whose expressions are induced by UV-B, inhibit UVR8 nuclear retention via attenuating the UVR8-COP1 interaction, allowing UVR8 to exit the nucleus. Collectively, our data suggest that UV-B-induced monomerization of UVR8 promotes its nuclear translocation via free diffusion. In the nucleus, COP1 binding promotes UVR8 monomer nuclear retention, which is counterbalanced by the major negative regulators RUP1 and RUP2.

Substituent Effects on the Ultraviolet Absorption Properties of 2,4-Dihydroxy Dibenzophenone.

Substituent effects on the ultraviolet absorption properties of 2,4-dihydroxy dibenzophenone were investigated experimentally. Nine compounds of 2,4-dihydroxy dibenzophenone with different substituents were prepared by a solvent-free reaction of benzoyl chloride. The maximum absorption wavelength (λmax) of these samples was measured, and their UV resistance properties in cotton fabric as well as in polyester were determined. The results show that the λmax is dependent on the substituents at the benzylidene ring, and both electron donating substituents and electron withdrawing substituents cause a bathochromic shift. The UV resistance of fabric increases with the increase in compound concentration. The dyeing rate of each compound on polyester was higher than that of cotton. On cotton fabric, the dyeing rate of 2,4-dihydroxybenzophenone was the highest, 77.8%. On polyester, that of 2,4-dihydroxy-4'-ethyl dibenzophenone was the highest, 84.1%. The study provides new insights into the effect of substituents on the properties of 2,4-dihydroxy dibenzophenone that are related to the whitening of cotton and polyester materials.

Identification of the pigment and its role in UV resistance in Paecilomyces variotii, a Chernobyl isolate, using genetic manipulation strategies.

Fungi produce secondary metabolites that are not directly involved in their growth, but often contribute to their adaptation to extreme environmental stimuli and enable their survival. Conidial pigment or melanin is one of the secondary metabolites produced naturally by a polyketide synthesis (PKS) gene cluster in several filamentous fungi and is known to protect these fungi from extreme radiation conditions. Several pigmented or melanized fungi have been shown to grow under extreme radiation conditions at the Chernobyl nuclear accident site. Some of these fungi, including Paecilomyces variotii, were observed to grow towards the source of radiation. Therefore, in this study, we wanted to identify if the pigment produced by P. variotii, contributes to providing protection against radiation condition. We first identified the PKS gene responsible for synthesis of pigment in P. variotii and confirmed its role in providing protection against UV irradiation through CRISPR-Cas9 mediated gene deletion. This is the first report that describes the use of CRISPR methodology to create gene deletions in P. variotii. Further, we showed that the pigment produced by this fungus, was not inhibited by DHN-melanin pathway inhibitors, indicating that the fungus does not produce melanin. We then identified the pigment synthesized by the PKS gene of P. variotii, as a naptho-pyrone Ywa1, by heterologously expressing the gene in Aspergillus nidulans. The results obtained will further aid in understanding the mechanistic basis of radiation resistance.

Pigments from Antarctic bacteria and their biotechnological applications.

Pigments from microorganisms have triggered great interest in the market, mostly by their "natural" appeal, their favorable production conditions, in addition to the potential new chemical structures or naturally overproducing strains. They have been used in: food, feed, dairy, textile, pharmaceutical, and cosmetic industries. The high rate of pigment production in microorganisms recovered from Antarctica in response to selective pressures such as: high UV radiation, low temperatures, and freezing and thawing cycles makes this a unique biome which means that much of its biological heritage cannot be found elsewhere on the planet. This vast arsenal of pigmented molecules has different functions in bacteria and may exhibit different biotechnological activities, such as: extracellular sunscreens, photoprotective function, antimicrobial activity, biodegradability, etc. However, many challenges for the commercial use of these compounds have yet to be overcome, such as: the low stability of natural pigments in cosmetic formulations, the change in color when subjected to pH variations, the low yield and the high costs in their production. This review surveys the different types of natural pigments found in Antarctic bacteria, classifying them according to their chemical structure. Finally, we give an overview of the main pigments that are used commercially today.

Nanoparticle-loaded microcapsules providing effective UV protection for Cry1Ac.

AIM: To prepare several novel microcapsules using chitosan (Cs) and Alginate (Alg) as coating materials, and nano-ZnO, nano-SiO2, nano-TiO2 as UV protective agents for improving UV resistance of Cry1Ac. METHODS: Microcapsules were prepared by the layer-by-layer (LbL) self-assembly technique and electrostatic adsorption. The morphologies were observed by scanning electron microscopy (SEM), and the stability under UV radiation was studied by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and bioassay. RESULTS: SEM showed that nano-ZnO and nano-TiO2 could be adsorbed on the negatively charged MC with the outermost layer being Alg, while nano-SiO2 could be adsorbed on the positively charged MC with Cs as the outermost layer. SDS-PAGE and bioassay showed that nano-ZnO and nano-SiO2 could provide effective UV protection after 8 h UV irradiation (p > 0.05), and nano-TiO2 could provide effective UV protection after 4 h UV irradiation (p > 0.05). CONCLUSION: The microcapsules loaded with nanoparticles provided excellent UV resistance for Cry1Ac.

For: Pesticide biochemistry and physiology recG is involved with the resistance of Bt to UV.

As an ATP-dependent DNA helicase, RecG can repair DNA replication forks in many organisms. However, knowledge of recG in Bacillus thuringiensis (Bt) is limited. In our previous study, recG was found damaged in Bt LLP29-M19, which was more resistant to ultraviolet light (UV) after exposing Bt LLP29 to UV for 19 generations. To further understand the function of recG in the mechanism of Bt UV resistance, recG was knocked out and recovered with homologous recombination technology in Bt LLP29. Comparing the resistance of the different mutants to UVB, Bt ∆recG-LLP29 lacking recG was found more sensitive to UVB, hydroxyurea (HU) and H2O2 than LLP29 and the complementation strain. To compare the expression level of recG in the Bt strains under different UV treatments, Quantitative Real-time PCR (RT-qPCR) of recG was performed in the tested Bt strains, which showed that the expression level of recG in Bt ∆recG-LLP29 was substantially lower than that in the original strain and complementation strain. Interestingly, when exposed to UV for 20 min, RecG expression in both Bt LLP29 and Bt recG-R was the highest. The unwinding activity of recG in Bt LLP29 and the complementation strain were also found higher than that of the recG knockout strain, Bt ∆recG-LLP29. These results demonstrate that recG is involved with the resistance of Bt to UV. These findings not only enhance the understanding of the Bt UV resistance mechanism, but also provide an important theoretical basis for the application of Bt.

Two Photolyases Repair Distinct DNA Lesions and Reactivate UVB-Inactivated Conidia of an Insect Mycopathogen under Visible Light.

Fungal conidia serve as active ingredients of fungal insecticides but are sensitive to solar UV irradiation, which impairs double-stranded DNA (dsDNA) by inducing the production of cytotoxic cyclobutane pyrimidine dimers (CPDs) and (6-4)-pyrimidine-pyrimidine photoproducts (6-4PPs). This study aims to elucidate how CPD photolyase (Phr1) and 6-4PP photolyase (Phr2) repair DNA damage and photoreactivate UVB-inactivated cells in Beauveria bassiana, a main source of fungal insecticides. Both Phr1 and Phr2 are proven to exclusively localize in the fungal nuclei. Despite little influence on growth, conidiation, and virulence, singular deletions of phr1 and phr2 resulted in respective reductions of 38% and 19% in conidial tolerance to UVB irradiation, a sunlight component most harmful to formulated conidia. CPDs and 6-4PPs accumulated significantly more in the cells of Δphr1 and Δphr2 mutants than in those of a wild-type strain under lethal UVB irradiation and were largely or completely repaired by Phr1 in the Δphr2 mutant and Phr2 in the Δphr1 mutant after optimal 5-h exposure to visible light. Consequently, UVB-inactivated conidia of the Δphr1 and Δphr2 mutants were much less efficiently photoreactivated than were the wild-type counterparts. In contrast, overexpression of either phr1 or phr2 in the wild-type strain resulted in marked increases in both conidial UVB resistance and photoreactivation efficiency. These findings indicate essential roles of Phr1 and Phr2 in photoprotection of B. bassiana from UVB damage and unveil exploitable values of both photolyase genes for improved UVB resistance and application strategy of fungal insecticides.IMPORTANCE Protecting fungal cells from damage from solar UVB irradiation is critical for development and application of fungal insecticides but is mechanistically not understood in Beauveria bassiana, a classic insect pathogen. We unveil that two intranuclear photolyases, Phr1 and Phr2, play essential roles in repairing UVB-induced dsDNA lesions through respective decomposition of cytotoxic cyclobutane pyrimidine dimers and (6-4)-pyrimidine-pyrimidine photoproducts, hence reactivating UVB-inactivated cells effectively under visible light. Our findings shed light on the high potential of both photolyase genes for use in improving UVB resistance and application strategy of fungal insecticides.

Resistance to UV Irradiation Caused by Inactivation of nurA and herA Genes in Thermus thermophilus.

NurA and HerA are thought to be essential proteins for DNA end resection in archaeal homologous recombination systems. Thermus thermophilus, an extremely thermophilic eubacterium, has proteins that exhibit significant sequence similarity to archaeal NurA and HerA. To unveil the cellular function of NurA and HerA in T. thermophilus, we performed phenotypic analysis of disruptant mutants of nurA and herA with or without DNA-damaging agents. The nurA and herA genes were not essential for survival, and their deletion had no effect on cell growth and genome integrity. Unexpectedly, these disruptants of T. thermophilus showed increased resistance to UV irradiation and mitomycin C treatment. Further, these disruptants and the wild type displayed no difference in sensitivity to oxidative stress and a DNA replication inhibitor. T. thermophilus NurA had nuclease activity, and HerA had ATPase. The overexpression of loss-of-function mutants of nurA and herA in the respective disruptants showed no complementation, suggesting their enzymatic activities were involved in the UV sensitivity. In addition, T. thermophilus NurA and HerA interacted with each other in vitro and in vivo, forming a complex with 2:6 stoichiometry. These results suggest that the NurA-HerA complex has an architecture similar to that of archaeal counterparts but that it impairs, rather than promotes, the repair of photoproducts and DNA cross-links in T. thermophilus cells. This cellular function is distinctly different from that of archaeal NurA and HerA.IMPORTANCE Many nucleases and helicases are engaged in homologous recombination-mediated DNA repair. Previous in vitro analyses in archaea indicated that NurA and HerA are the recombination-related nuclease and helicase. However, their cellular function had not been fully understood, especially in bacterial cells. In this study, we performed in vivo analyses to address the cellular function of nurA and herA in an extremely thermophilic bacterium, Thermus thermophilus As a result, T. thermophilus NurA and HerA exhibited an interfering effect on the repair of several instances of DNA damage in the cell, which is in contrast to the results in archaea. This finding will facilitate our understanding of the diverse cellular functions of the recombination-related nucleases and helicases.

Pervasiveness of UVC254-resistant Geobacillus strains in extreme environments.

We have characterized a broad collection of extremophilic bacterial isolates from a deep subsurface mine, compost dumping sites, and several hot spring ecosystems. Spore-forming strains isolated from these environments comprised both obligate thermophiles/thermotolerant species (growing at > 55 °C; 240 strains) and mesophiles (growing at 15 to 40 °C; 12 strains). An overwhelming abundance of Geobacillus (81.3%) and Bacillus (18.3%) species was observed among the tested isolates. 16S rRNA sequence analysis documented the presence of 24 species among these isolates, but the 16S rRNA gene was shown to possess insufficient resolution to reliably discern Geobacillus phylogeny. gyrB-based phylogenetic analyses of nine strains revealed the presence of six known Geobacillus and one novel species. Multilocus sequence typing analyses based on seven different housekeeping genes deduced from whole genome sequencing of nine strains revealed the presence of three novel Geobacillus species. The vegetative cells of 41 Geobacillus strains were exposed to UVC254, and most (34 strains) survived 120 J/m2, while seven strains survived 300 J/m2, and cells of only one Geobacillus strain isolated from a compost facility survived 600 J/m2. Additionally, the UVC254 inactivation kinetics of spores from four Geobacillus strains isolated from three distinct geographical regions were evaluated and compared to that of a spacecraft assembly facility (SAF) clean room Geobacillus strain. The purified spores of the thermophilic SAF strain exhibited resistance to 2000 J/m2, whereas spores of two environmental Geobacillus strains showed resistance to 1000 J/m2. This study is the first to investigate UV resistance of environmental, obligately thermophilic Geobacillus strains, and also lays the foundation for advanced understanding of necessary sterilization protocols practiced in food, medical, pharmaceutical, and aerospace industries.

Resistance of a multiple-isolate marine culture to ultraviolet C irradiation: inactivation vs biofilm formation.

Ultraviolet (UV) irradiation is an emerging strategy for controlling the formation of undesired biofilms in water desalination facilities using reverse osmosis (RO). However, most studies examining these pretreatments are limited as they have been conducted on single-species cultures, while biofilms are composed of multiple-species communities. The goal of this study was to investigate the effect of UV-C irradiation on a model community composed of six environmental isolates from a marine biofilm formed in RO seawater desalination plant. There was a high variance in the susceptibility of the single-isolate cultures to UV-C, from no response (isolate Eryth23) to complete inactivation (isolate Vib3). The most active wavelength was around 260 nm, resulting in a loss of viability of single-isolate cultures and loss of vitality of the mixed-isolate cultures. With respect to biofilm formation, the activity of this wavelength was completely different compared to its activity on planktonic suspension. Irradiation with 260 nm did not inhibit the total biofilm formation by the six-isolate culture; moreover, isolates such as the resistant Eryth23 or the susceptible Pseudoalt17, even gained abundance in the mixed isolate biofilm. The only decrease in total biofilm was obtained from irradiation at 280 nm, which was less active against the planktonic culture. These results indicate that the complexity of the biofilm-forming microbial community may contribute to its resistance to UV-C irradiation. SIGNIFICANCE AND IMPACT OF THE STUDY: This study examined the resistance of a multiple-isolate native marine culture to UV-C irradiation, in terms of viability, vitality and the ability to form biofilm. Results of this study showed that even though most of the cells were inactivated both in single-isolate and in multiple-isolate cultures, still the multiple-isolate cultures manages to form biofilms, surprisingly with higher biomass than without irradiation. The significance of the study is in its conclusion that studies on UV-C irradiation of biofilm-forming model micro-organisms are not always applicable to natural multiple-species communities.

Deinococcus knuensis sp. nov., a bacterium isolated from river water.

Strain 16F3HT, a Gram-negative, aerobic, non-motile, and oval-shaped bacterium, was isolated from river water collected from the Han River in South Korea. Growth of strain 16F3HT was observed at 10-42 °C (optimum at 25-30 °C), but no growth occurred at 4 °C. The strain is able to grow at pH 4-10 (optimum at pH 7-8) and tolerates up to 4% NaCl (w/v), with optimum growth at 0.5% NaCl. The isolate was found to be resistant to UV irradiation. Based on 16S rRNA gene sequence analysis, it is closely related to 'Deinococcus seoulensis' 16F1E (98.8%), Deinococcus aquaticus PB314T (98.1%) and Deinococcus caeni Ho-08T (98.0%). The level of DNA-DNA homology between the novel strain and the three related strains was 57.4, 41.2, and 35.8%, respectively. Chemotaxonomic data revealed that strain 16F3HT possesses MK-8 as the predominant respiratory quinone, an unidentified phosphoglycolipid as the major polar lipid, and C15:1 ω6c and C16:1 ω7c as the major fatty acids. The DNA G + C content was determined to be 65.7 mol%. Based on polyphasic evidence, strain 16F3HT (=KCTC 33794T = JCM 31406T) should be classified as the type strain of a novel Deinococcus species, for which the name Deinococcus knuensis sp. nov. is proposed.