Long-term effects of non-weight bearing and immobilization after anterior cruciate ligament reconstruction on joint contracture formation in rats.

PURPOSE: Non-weight bearing improves and immobilization worsens contracture induced by anterior cruciate ligament reconstruction (ACLR), but effect persistence after reloading and remobilization remains unclear, and the combined effects of these factors on ACLR-induced contracture are unknown. We aimed to determine 1) whether the effects of short-term (2-week) non-weight bearing or immobilization after ACLR on contracture would be sustained by reloading or remobilization during a 10-week observation period, and 2) how the combination of both interventions compared to the outcome of either alone. METHODS: We divided 88 ACL-reconstructed male rats into four groups: non-intervention, non-weight bearing, joint immobilization, and both interventions. Interventions were performed for 2 weeks, followed by rearing without intervention. Twelve untreated rats were used as controls. At 2, 4, and 12 weeks post-surgery, we assessed range of motion (ROM) and histological changes. RESULTS: ACLR resulted in persistent loss of ROM, accompanied by synovial shortening, capsule thickening, and osteophyte formation. Two weeks of non-weight bearing increased ROM and reduced osteophyte size, but the beneficial effects disappeared within 10 weeks after reloading. Two-week immobilization decreased ROM and facilitated synovial shortening. After remobilization, ROM partially recovered but remained below non-intervention levels at 12 weeks. When both interventions were combined, ROM was similar to immobilization alone. CONCLUSIONS: The beneficial effects of 2-week non-weight bearing on contracture diminished within 10 weeks after reloading. The adverse effects of 2-week immobilization on contracture persisted after 10 weeks of remobilization. The effects of the combined use of both interventions on contracture were primarily determined by immobilization.

Accuracy of Volumetric Bone Mineral Density Measurement in Weight Bearing, Cone Beam Computed Tomography.

BACKGROUND: Weight bearing computed tomography (WBCT) utilizes cone beam CT technology to provide assessments of lower limb joint structures while they are functionally loaded. Grey-scale values indicative of X-ray attenuation that are output from cone beam CT are challenging to calibrate, and their use for bone mineral density (BMD) measurement remains debatable. To determine whether WBCT can be reliably used for cortical and trabecular BMD assessment, we sought to establish the accuracy of BMD measurements at the knee using modern WBCT by comparing them to measurements from conventional CT. METHODS: A hydroxyapatite phantom with three inserts of varying densities was used to systematically quantify signal uniformity and BMD accuracy across the acquisition volume. We evaluated BMD in vivo (n = 5, female) using synchronous and asynchronous calibration techniques in WBCT and CT. To account for variation in attenuation along the height (z-axis) of acquisition volumes, we tested a height-dependent calibration approach for both WBCT and CT images. RESULTS: Phantom BMD measurement error in WBCT was as high as 15.3% and consistently larger than CT (up to 5.6%). Phantom BMD measures made under synchronous conditions in WBCT improved measurement accuracy by up to 3% but introduced more variability in measured BMD. We found strong correlations (R = 0.96) as well as wide limits of agreement (-324 mgHA/cm3 to 183 mgHA/cm3) from Bland-Altman analysis between WBCT and CT measures in vivo that were not improved by height-dependent calibration. CONCLUSION: Whilst BMD accuracy from WBCT was found to be dependent on apparent density, accuracy was independent of the calibration technique (synchronous or asynchronous) and the location of the measurement site within the field of view. Overall, we found strong correlations between BMD measures from WBCT and CT and in vivo measures to be more accurate in trabecular bone regions. Importantly, WBCT can be used to distinguish between anatomically relevant differences in BMD, however future work is necessary to determine the repeatability and sensitivity of BMD measures in WBCT.

Morphological changes in flatfoot: a 3D analysis using weight-bearing CT scans.

BACKGROUND: Flatfoot is a condition resulting from complex three-dimensional (3D) morphological changes. Most Previous studies have been constrained by using two-dimensional radiographs and non-weight-bearing conditions. The deformity in flatfoot is associated with the 3D morphology of the bone. These morphological changes affect the force line conduction of the hindfoot/midfoot/forefoot, leading to further morphological alterations. Given that a two-dimensional plane axis overlooks the 3D structural information, it is essential to measure the 3D model of the entire foot in conjunction with the definition under the standing position. This study aims to analyze the morphological changes in flatfoot using 3D measurements from weight-bearing CT (WBCT). METHOD: In this retrospective comparative our CT database was searched between 4-2021 and 3-2022. Following inclusion criteria were used: Patients were required to exhibit clinical symptoms suggestive of flatfoot, including painful swelling of the medial plantar area or abnormal gait, corroborated by clinical examination and confirmatory radiological findings on CT or MRI. Healthy participants were required to be free of any foot diseases or conditions affecting lower limb movement. After applying the exclusion criteria (Flatfoot with other foot diseases), CT scans (mean age = 20.9375, SD = 16.1) confirmed eligible for further analysis. The distance, angle in sagittal/transverse/coronal planes, and volume of the two groups were compared on reconstructed 3D models using the t-test. Logistic regression was used to identify flatfoot risk factors, which were then analyzed using receiver operating characteristic curves and nomogram. RESULT: The flatfoot group exhibited significantly lower values for calcaneofibular distance (p = 0.001), sagittal and transverse calcaneal inclination angle (p < 0.001), medial column height (p < 0.001), sagittal talonavicular coverage angle (p < 0.001), and sagittal (p < 0.001) and transverse (p = 0.015) Hibb angle. In contrast, the sagittal lateral talocalcaneal angle (p = 0.013), sagittal (p < 0.001) and transverse (p = 0.004) talocalcaneal angle, transverse talonavicular coverage angle (p < 0.001), coronal Hibb angle (p < 0.001), and sagittal (p < 0.001) and transverse (p = 0.001) Meary's angle were significantly higher in the flatfoot group. The sagittal Hibb angle (B = - 0.379, OR = 0.684) and medial column height (B = - 0.990, OR = 0.372) were identified as significant risk factors for acquiring a flatfoot. CONCLUSION: The findings validate the 3D spatial position alterations in flatfoot. These include the abduction of the forefoot and prolapse of the first metatarsal proximal, the arch collapsed, subluxation of the talonavicular joint in the midfoot, adduction and valgus of the calcaneus, adduction and plantar ward movement of the talus in the hindfoot, along with the first metatarsal's abduction and dorsiflexion in the forefoot.

The small screw-apex distance is potentially associated with femoral head osteonecrosis in adults with femoral neck fractures treated by closed reduction and percutaneous 3 parallel cannulated screws.

OBJECTIVE: Femoral neck fractures (FNFs) are among the most common fractures in elderly individuals. Surgery is the main treatment for FNFs, and osteonecrosis of the femoral head (ONFH) is one of the unacceptable complications. This study aimed to assess both the clinical and radiological outcomes in patients with FNFs treated with three parallel cannulated screws and to identify relationship between screws position and ONFH. PATIENTS AND METHODS: A total of 100 patients who were treated with closed reduction and fixed with 3 parallel cannulated screws met the inclusion criteria between January 2014 and December 2020 at authors' institution. The follow-up duration, age, sex, affected side, and injury-to-surgery interval were collected; the neck-shaft angle of both hips, screw-apex distance (SAD) and the tip-apex distance (TAD)were measured; and the Garden classification, quality of reduction and presence of ONFH were evaluated. RESULTS: The sample consisted of 37 males and 63 females, with 60 left and 40 right hips affected. The mean age of patients was 54.93 ± 12.24 years, and the mean follow-up was 56.3 ± 13.38 months. The overall incidence of ONFH was 13%. No significant difference was observed in the incidence of ONFH by affected side, age, fracture displacement, injury-to-surgery interval, neck-shaft angle deviation, or reduction quality. The SAD was significantly shorter in ONFH patients than in normal patients for all three screws (p = 0.02, 0.02, and 0.01, respectively). CONCLUSIONS: The short SAD of all screws is associated with femoral head necrosis of FNFs treated with 3 cannulated screws. The short SAD indicated that screws malpositioning in the weight-bearing area of the femoral head, potentially harming the blood supply and compromising the anchorage of the primary compressive trabeculae in this region.

The impact of early weight-bearing on results following anterior cruciate ligament reconstruction.

INTRODUCTION: Anterior cruciate ligament (ACL) ruptures are common injuries that typically affect young, physically active individuals and may require surgical reconstruction. Studies have shown that the long time success of ACL reconstruction depends on the surgical technique and the postoperative rehabilitation strategy. However, there is still no consensus on the content of rehabilitation programs. Hence, additional research is required to elucidate the significance of early weight-bearing in the rehabilitation process following ACL reconstruction. The aim of this article is to examine the impact of weight-bearing on the clinical results of ACL reconstruction. MATERIALS AND METHODS: We retrospectively reviewed patient records who had undergone arthroscopic reconstruction using a semitendinosus-gracilis tendon graft for anterior cruciate ligament rupture between January 2018 and December 2020. The study included the data of 110 patients. The patients were split into two groups: Group 1 underwent early weight-bearing, while Group 2 followed a non-weight-bearing regimen for three weeks. We assessed the patients using the anterior drawer test, Lachman test, range of motion, Lysholm knee scale, Cincinnati scale, Tegner scale, International Knee Documentation Committee (IKDC) form and clinical records. Analytical tests were conducted to compare the results. RESULTS: The complication rates did not show a significant difference between the groups. Group 1 had higher frequencies of positive anterior drawer and Lachman tests. The Lysholm and Cincinnati knee scores of patients in Group 1 were notably lower than those of patients in Group 2. Additionally, the Tegner activity scores and IKDC scores of patients in Group 1 were also meaningfully lower than those of patients in Group 2. In Group 1 patients, there was no notable relationship observed between body mass index (BMI) and the results of the anterior drawer test (ADT) or Lachman test. However, patients with a BMI of 25 or higher in Group 1 showed a decrease in postoperative IKDC scores. In Group 2 patients, no significant relationship was identified between BMI and either the ADT or the Lachman test outcome. CONCLUSION: Based on current literature and current rehabilitation guidelines following ACL reconstruction, the decision to initiate early weight-bearing is based on a limited number of studies with low levels of evidence. In our study, we found that patients who followed a non-weight-bearing regimen for 3 weeks after surgery had better mid-term results than those who were allowed to bear weight early. It appears that further prospective studies on this topic are needed to update rehabilitation guidelines in the next.

Assessment of knee instability in ACL-injured knees using weight-bearing computed tomography (WBCT): a novel protocol and preliminary results.

OBJECTIVE: To propose a protocol for assessing knee instability in ACL-injured knees using weight-bearing computed tomography (WBCT). MATERIALS AND METHODS: We enrolled five patients with unilateral chronic ACL tears referred for WBCT. Bilateral images were obtained in four positions: bilateral knee extension, bilateral knee flexion, single-leg stance with knee flexion and external rotation, and single-leg stance with knee flexion and internal rotation. The radiation dose, time for protocol acquisition, and patients' tolerance of the procedure were recorded. A blinded senior radiologist assessed image quality and measured the anterior tibial translation (ATT) and femorotibial rotation (FTR) angle in the ACL-deficient and contralateral healthy knee. RESULTS: All five patients were male, aged 23-30 years old. The protocol resulted in a 16.2 mGy radiation dose and a 15-min acquisition time. The procedure was well-tolerated, and patient positioning was uneventful, providing good-quality images. In all positions, the mean ATT and FTR were greater in ACL-deficient knees versus the healthy knee, with more pronounced differences observed in the bilateral knee flexion position. Mean lateral ATT in the flexion position was 9.1±2.8 cm in the ACL-injured knees versus 4.0±1.8 cm in non-injured knees, and mean FTR angle in the bilateral flexion position was 13.5°±7.7 and 8.6°±4.6 in the injured and non-injured knees, respectively. CONCLUSION: Our protocol quantitatively assesses knee instability with WBCT, measuring ATT and FTR in diverse knee positions. It employs reasonable radiation, is fast, well-tolerated, and yields high-quality images. Preliminary findings suggest ACL-deficient knees show elevated ATT and FTR, particularly in the 30° flexion position.

Assessment of lower limb alignment: supine weight-bearing CT scanograms compared with a standing full-length radiograph.

PURPOSE: We identified limb misalignment by applying personalized axial force while the limb was in a supine position to mimic a standing posture. This study aimed to confirm the accuracy of evaluating lower limb alignment using supine weight-bearing CT scanograms. METHODS: We prospectively compared measurements of the weight-bearing line ratio (WBL), hip-knee-ankle (HKA) angle, and joint convergence angle (JLCA) in 46 sets of supine weight-bearing CT scanograms with those obtained from full-length standing anteroposterior lower extremity radiographs. We achieved the weight-bearing CT scanograms by applying six different levels of axial force: zero, 1/5 of body weight, 2/5 of body weight, 3/5 of body weight, 4/5 of body weight, and full body weight. We assessed the impact of age, body mass index, HKA, and JLCA on the observed mechanical axis deviation differences between the two methods. RESULT: The average absolute difference between standing radiographs and supine CT scanograms was 4.32% for the WBL ratio (p < 0.05), 1.25° for HKA (p < 0.05), and 0.46 for JLCA (p < 0.05). The mean absolute difference was minimal when applying full body weight axial pressure during CT scanograms (p > 0.05). Age, body mass index, HKA, and JLCA had no effect on the deviation in the mechanical axis measurements obtained through supine weight-bearing CT scanograms with full body weight. CONCLUSION: No significant differences were found in assessing lower limb alignment between standing radiographs and supine weight-bearing CT scanograms with full body weight. Weight-bearing CT scanograms prove to be a valuable method for assessing lower limb alignment while in a supine position.

Walking with unilateral ankle-foot unloading: a comparative biomechanical analysis of three assistive devices.

BACKGROUND: Foot and ankle unloading is essential in various clinical contexts, including ulcers, tendon ruptures, and fractures. Choosing the right assistive device is crucial for functionality and recovery. Yet, research on the impact of devices beyond crutches, particularly ankle-foot orthoses (AFOs) designed to unload the ankle and foot, is limited. This study investigates the effects of three types of devices-forearm crutches, knee crutch, and AFO-on biomechanical, metabolic, and subjective parameters during walking with unilateral ankle-foot unloading. METHODS: Twenty healthy participants walked at a self-selected speed in four conditions: unassisted able-bodied gait, and using three unloading devices, namely forearm crutches, iWalk knee crutch, and ZeroG AFO. Comprehensive measurements, including motion capture, force plates, and metabolic system, were used to assess various spatiotemporal, kinematic, kinetic, and metabolic parameters. Additionally, participants provided subjective feedback through questionnaires. The conditions were compared using a within-subject crossover study design with repeated measures ANOVA. RESULTS: Significant differences were found between the three devices and able-bodied gait. Among the devices, ZeroG exhibited significantly faster walking speed and lower metabolic cost. For the weight-bearing leg, ZeroG exhibited the shortest stance phase, lowest braking forces, and hip and knee angles most similar to normal gait. However, ankle plantarflexion after push-off using ZeroG was most different from normal gait. IWalk and crutches caused significantly larger center-of-mass mediolateral and vertical fluctuations, respectively. Participants rated the ZeroG as the most stable, but more participants complained it caused excessive pressure and pain. Crutches were rated with the highest perceived exertion and lowest comfort, whereas no significant differences between ZeroG and iWalk were found for these parameters. CONCLUSIONS: Significant differences among the devices were identified across all measurements, aligning with previous studies for crutches and iWalk. ZeroG demonstrated favorable performance in most aspects, highlighting the potential of AFOs in enhancing gait rehabilitation when unloading is necessary. However, poor comfort and atypical sound-side ankle kinematics were evident with ZeroG. These findings can assist clinicians in making educated decisions about prescribing ankle-foot unloading devices and guide the design of improved devices that overcome the limitations of existing solutions.

Cartilage regeneration is related to superior mid-term patient-reported outcomes after open-wedge high tibial osteotomy.

PURPOSE: Medial open-wedge high tibial osteotomy (OWHTO) is related to cartilage improvement in the medial compartment. This study aimed to evaluate factors associated with cartilage improvement and patient-reported outcomes (PRO) after OWHTO. It was hypothesised that cartilage improvement is associated with favourable PRO. METHODS: This retrospective study included 94 patients who underwent OWHTO. The mean follow-up period was 5 years. The weight-bearing line ratio (WBLR) was defined as the ratio of the distance from the medial tibial edge to the tibial insertion of the weight-bearing line and the tibial width. The International Cartilage Research Society grade evaluated the medial femoral condyle (MFC) and medial tibial plateau (MTP) at initial and second-look arthroscopy, and cartilage improvement after OWHTO was assessed. Postoperative knee injury and osteoarthritis outcome scores (KOOS) were compared between the groups with improved and non-improved cartilage. Additionally, factors related to cartilage improvement and postoperative KOOS scores were analysed. RESULTS: Regarding the MFC, KOOS pain, symptoms, activities of daily living (ADL) and quality of life (QOL) were significantly higher in the cartilage-improved group than in the non-improved group (p = 0.012, 0.003, 0.001, 0.006), and cartilage improvement was significantly related to KOOS pain, ADL and QOL (p = 0.021, 0.039, 0.013). In addition, the postoperative WBLR was associated with cartilage improvement, with a cutoff value of 54.0% (p = 0.046). Regarding the MTP, KOOS ADL and QOL (p = 0.026, 0.022) were significantly higher in the cartilage-improved group than in the nonimproved group. Body mass index (BMI) was significantly related to the postoperative QOL (p = 0.018) and associated with cartilage improvement, with a cutoff value of 25.9 kg/m2 (p = 0.002). CONCLUSION: A postoperative WBLR greater than 54.0% and a preoperative BMI below 25.9 kg/m2 were associated with cartilage improvement, positively impacting PRO after OWHTO. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

No difference between 5 and 6 weeks of non-weight bearing after osteochondral grafts for medial osteochondral defects of the talus with medial malleolar osteotomy.

PURPOSE: The present study aimed to compare the clinical outcomes and safety at a 1-year follow-up after 5 or 6 weeks of non-weight bearing after a Talar OsteoPeriostic grafting from the Iliac Crest (TOPIC) for a medial osteochondral lesion of the talus (OLT). METHODS: A retrospective comparative case-control analysis of prospectively followed patients who underwent a TOPIC procedure with medial malleolus osteotomy was performed. Patients were matched in two groups with either 5 or 6 weeks of non-weight bearing. Clinical outcomes were evaluated using the Numeric Rating Scale (NRS) during walking, rest, running, and stairclimbing. Additionally, the Foot and Ankle Outcome Score (FAOS) and American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score were assessed. Moreover, radiology and complications were assessed. RESULTS: Eleven patients were included in the 5-week non-weight bearing group and 22 in the 6-week non-weight bearing group. No significant differences were found in any of the baseline variables. The NRS during walking in the 5-week group improved by 3.5 points and 4 points for the 6-week group (p = 0.58 at 1-year post-operatively). In addition, all other NRS scores, FAOS subscales and the AOFAS scores improved (all n.s. at 1 year follow-up). No significant differences in radiological (osteotomy union and cyst presence in the graft) were found. Moreover, no significant differences were found in terms of complications and reoperations. CONCLUSION: No statistical significant differences were found in terms of clinical, radiological and safety outcomes between 5 or 6 weeks of non-weight bearing following a TOPIC for a medial OLT. LEVEL OF EVIDENCE: Level III, Therapeutic.

Enhancing precision in osteochondral lesions of the talus measurements and improving agreement in surgical decision-making using weight-bearing computed tomography and distance mapping.

PURPOSE: Weight-bearing computed tomography (WBCT) enables the creation of a three-dimensional (3D) model that represents the ankle morphology in a standing position. Distance mapping (DM) is a complementary feature that uses color coding to represent the relative intraarticular distance and can be used to outline intraarticular defects. Consequently, DM offers a novel approach to delineating osteochondral lesions of the talus (OLT), allowing for the quantification of its surface, volume and depth. The reliability of DM for OLT measurements has yet to be thoroughly evaluated. This study primarily aims to determine the reliability of DM in measuring the surface, depth and volume of OLT. A secondary objective is to ascertain whether measurements obtained through DM, when integrated with a predefined treatment algorithm, can facilitate consensus among surgeons regarding the optimal surgical intervention. METHODS: This cohort comprised 36 patients with 40 OLTs evaluated using WBCT and DM. Two raters used DM to determine the lesion boundary (LB) and lesion fundus (LF) and calculate the lesion depth, surface and volume. The raters were asked to choose between bone marrow stimulation, autologous matrix-induced chondrogenesis and osteochondral transposition based on the measurement. Inter-rater and intra-rater agreement was measured. RESULTS: Interclass correlation of the lesion's depth surface produced an excellent inter-rater and intra-rater agreement of 0.90-0.94 p < 0.001. Cohen's κ agreement analysis of the preferable preoperative plan produced a κ = 0.834, p < 0.001, indicating a near-perfect agreement. CONCLUSION: WBCT-based 3D modules and DM can be used to measure the lesion's surface, depth and volume with excellent inter-rater and inter-rater agreement; using this measurement and a predetermined treatment algorithm, a near-perfect inter-rater agreement for the preoperative planning was reached. WBCT in conjunction with AI capabilities could help determine the type of surgery needed preoperatively, evaluate the hindfoot alignment and assess if additional surgeries are needed. LEVEL OF EVIDENCE: Level III.

Medial-pivot design does not provide superior clinical results compared to posterior-stabilized total knee arthroplasty despite kinematic differences during step-up and lunge activities: A prospective randomized controlled trial under medial tight soft tissue balance.

PURPOSE: This study aimed to compare in vivo kinematics during weight-bearing daily activities and determine the relationship with clinical outcomes in patients undergoing total knee arthroplasty (TKA) with a medial-pivot (MP, Evolution™) versus a posterior-stabilized (PS, Persona®) design under constant conditions of intraoperative soft tissue balance. METHODS: Forty patients undergoing MP or PS-TKA under similar conditions of soft tissue balance were enrolled in this prospective randomized controlled trial. Outcome measures included clinical knee society scores (KSS) and knee injury and osteoarthritis outcome scores (KOOS). A kinematic assessment was conducted while the participants performed lunge and step-up activities under fluoroscopic guidance. RESULTS: Eighteen patients in each arm completed 1-year follow-up and were included in the analysis. All patients experienced pain relief and satisfactory knee function postoperatively. In kinematics, in the MP arm, the medial femoral condyle remained consistent, whereas the lateral femoral condyle gradually shifted posteriorly with increasing knee flexion. Conversely, in the PS arm, paradoxical anterior movement of the medial femoral condyle accompanied the lateral pivot motion. During lunge and step-up activities, a medial-pivot motion was observed in 83% and 72% of knees in the MP arm, respectively, compared with 22% and 11% in the PS arm. Despite these differences in kinematics, there were no statistically significant differences in the KSS and KOOS between the two groups. CONCLUSION: Under weight-bearing conditions during flexion, knees that underwent Evolution™ MP-TKA did not show superior clinical results compared to Persona® PS-TKA, despite exhibiting in vivo kinematics closely resembling the normal in vivo pattern. LEVEL OF EVIDENCE: Therapeutic studies-Level I.

Adjunctive Dorsal Spanning Plate Fixation in the Stabilization of Perilunate Dislocations.

PURPOSE: To compare the biomechanical properties of adjunctive dorsal spanning plate (DSP) fixation with traditional K-wire fixation of perilunate dislocations in a cadaveric model. METHODS: Fourteen fresh-frozen cadaveric wrists underwent simulated perilunate injury. The specimens were randomly allocated to either K-wire fixation versus K-wire and DSP fixation. Scapholunate (SL) ligament repair was performed in all specimens. The constructs were tested using a robot cyclically and to failure. Fluoroscopic images were obtained of the specimens prior to simulated injury, after fixation, after 10 and 100 loading cycles, and at construct failure. Differences in carpal alignment parameters (SL interval, SL angle, lunotriquetral interval, and capitolunate angle) and load to failure were recorded. RESULTS: There were no statistically significant differences between the two group's carpal alignment parameters after fixation. Specimens fixated with K-wires and DSP required significantly higher loads to achieve construct failure. The only significant difference between the two groups' carpal alignment parameters was SL interval change at failure. CONCLUSIONS: Compared with K-wire fixation alone, adjunctive DSP fixation resulted in significantly increased loads to failure and decreased change in SL interval at the time of failure. CLINICAL RELEVANCE: Adjunctive DSP may be a useful technique in the polytraumatized patient in whom providing back a weight-bearing extremity may be advantageous in the rehabilitation process.

Shoulder arthroplasty in the upper extremity weight-bearing patient: a systematic review of clinical outcomes and complications.

BACKGROUND: Patients who rely on their upper extremities for ambulation, or upper extremity ambulators (UEAs), place considerable stress on their shoulders through the use of assistive devices like walkers, crutches, canes, and wheelchairs. It has been postulated that UEAs may be at increased risk for complications following shoulder arthroplasty. This study aimed to systematically review the literature related to (1) patient-reported outcomes measures (PROMs), (2) functional outcomes, and (3) complications in UEAs who undergo shoulder arthroplasty. METHODS: A systematic review of the PubMed/MEDLINE, Embase, and Cochrane databases was performed to identify studies reporting clinical outcomes of shoulder arthroplasty in UEAs. Patient demographics, clinical characteristics, patient-reported outcomes measures, radiographic outcomes, and postoperative range of motion were collected and compared to control patients (ie bipedal ambulators) from the constituent studies. RESULTS: A total of eight studies evaluating 248 UEA cases and 206 control cases were included for review. Ambulatory assistive devices utilized by UEAs included walkers (39%), wheelchairs (38%), canes (22%), and a crutch (<1%). Among UEA cases, 197 (79%) reverse total shoulder arthroplasty (TSA), 37 (15%) anatomic TSA, and 14 (6%) hemiarthroplasty were performed. Overall, patients exhibited significant improvements in mean American Shoulder and Elbow Surgeons scores, Constant-Murley scores, Simple Shoulder Test scores, and Visual Analog Scale scores postoperatively. Among 3 studies that included comparison with control groups of bipedal ambulators, no significant differences in outcomes were identified. The overall clinical complication rate was 17% for UEAs compared to 9.1% for controls. The rate of revision surgery was 7.7% for UEAs and 4.9% for bipedal ambulators. CONCLUSIONS: UEAs experience satisfactory pain relief, functional improvements, and good subjective outcomes following shoulder arthroplasty. However, complication and revision rates are higher compared to those for bipedal ambulators, and the majority of UEAs undergo reverse shoulder arthroplasty compared to anatomic TSA.

Inertial Sensor-Based Quantification of Movement Symmetry in Trotting Warmblood Show-Jumping Horses after "Limb-by-Limb" Re-Shoeing of Forelimbs with Rolled Rocker Shoes.

Hoof care providers are pivotal for implementing biomechanical optimizations of the musculoskeletal system in the horse. Regular visits allow for the collection of longitudinal, quantitative information ("normal ranges"). Changes in movement symmetry, e.g., after shoeing, are indicative of alterations in weight-bearing and push-off force production. Ten Warmblood show jumping horses (7-13 years; 7 geldings, 3 mares) underwent forelimb re-shoeing with rolled rocker shoes, one limb at a time ("limb-by-limb"). Movement symmetry was measured with inertial sensors attached to the head, withers, and pelvis during straight-line trot and lunging. Normalized differences pre/post re-shoeing were compared to published test-retest repeatability values. Mixed-model analysis with random factors horse and limb within horse and fixed factors surface and exercise direction evaluated movement symmetry changes (p < 0.05, Bonferroni correction). Withers movement indicated increased forelimb push-off with the re-shod limb on the inside of the circle and reduced weight-bearing with the re-shod limb and the ipsilateral hind limb on hard ground compared to soft ground. Movement symmetry measurements indicate that a rolled rocker shoe allows for increased push-off on soft ground in trot in a circle. Similar studies should study different types of shoes for improved practically relevant knowledge about shoeing mechanics, working towards evidence-based preventative shoeing.

The position, orientation, and relative size of the fibularis longus tubercle in normal patients: A weightbearing CT assessment.

The fibularis longus attaches to the base of the first metatarsal at the fibularis/peroneus longus tubercle (FLT/PLT). Theoretically, differences in FLT morphology may reflect changes in the function of the fibularis longus. This study defines the normal limits of the FLT position, orientation, and size in patients with morphologically normal foot anatomy. A retrospective analysis of 131 feet without deformity in 72 patients undergoing weightbearing CT (WBCT) at a single center was conducted. The position and morphology of the FLT was assessed with novel measurements including tubercle-floor distance, tubercle-metatarsal angle, and the angle between the floor and a line bisecting the FLT (bisecting angle). Roundness of the FLT was compared to a triangle limiting its shape (triangular ratio), with lower values indicating increasing roundness. We also report relative size of the FLT to the first metatarsal (X/Y ratio), and relative size of the first metatarsal and FLT to the second metatarsal (XY/Z ratio). There were no significant side to side differences for any measurement (p > 0.05). Mean values were: tubercle-floor distance 28.02 ± 2.63 mm, tubercle-metatarsal angle 32.7 ± 6.32 degrees, bisecting angle 65.58 ± 6.27 degrees, triangular ratio 0.69 ± 0.04, X/Y ratio 1.13 ± 0.20, and XY/Z ratio 3.44 ± -0.72. Bisecting angle strongly correlated with tubercle-metatarsal angle (Pearson correlation 0.840, p < 0.001) suggesting FLT rotation occurred independent of foot position. ICC was >0.943 for all measurements. This study reports the morphology of the FLT in individuals with normal feet. This normative data may be used in future studies examining differences between groups of patients with foot pathology, helping us better understand the role of fibularis longus in the development and treatment of foot disorders.

Changes in clinical outcomes and alignment of the ipsilateral knee and ankle after supramalleolar osteotomy in patients with varus osteoarthritis of the ankle: a short-term follow-up study.

PURPOSE: The purpose of this study was to investigate the changes in clinical outcomes and alignment of the ipsilateral knee and ankle in patients with varus ankle osteoarthritis after supramalleolar osteotomy (SMO). METHODS: We retrospectively reviewed 23 patients (24 ankles) with Takakura II, IIIa and IIIb ankle osteoarthritis treated with SMO between May 2017 and March 2022. The radiologic parameters of ankles contained medial distal tibial angle (TAS), tibiotalar angle (TT), tibial lateral surface (TLS), tibial plafond inclination (TPI) and talar inclination (TI). The radiologic parameters of knees contained medial proximal tibial angle (MPTA), joint line convergence angle (JLCA), the knee joint line orientation relative to ground (G-KJLO) and WBL. Hip-knee-ankle angle (HKA) was also collected. The Takakura system was used for evaluating the ankle osteoarthritis and the Kellgren-Lawrence (KL) system was used for evaluating the knee osteoarthritis. Clinical evaluation of the ankle joints contained American Orthopedic Foot and Ankle Society (AOFAS), range of motion (ROM) and visual analogue scale (VAS). Clinical evaluation of the knee joints contained Japanese Orthopaedic Association Scores (JOA), ROM, VAS. RESULTS: The mean follow-up times were 20.3 ± 7.3 months (range 12-38). According to the radiologic evaluation, the TAS increased from preoperative 84.7° ± 2.0° to 91.2° ± 1.8° at the last follow-up (P < 0.001). The TPI and TI decreased from 4.4° ± 4.2° and 11.0° ± 5.2° to 0.1° ± 4.7° and 4.1° ± 4.8° (P < 0.001 for both). The TT angel improved from 9.5° ± 4.1° to 4.9° ± 3.3° (P < 0.001). No significant differences were found regarding MPTA, JLCA, G-KJLO, knee WBL and HKA (P > 0.05 for all). The Takakura stage improved after SMO (P < 0.001) whilst the KL stage maintains the similar lever (P > 0.05). According to the clinical evaluation, the AOFAS significantly increased from 67.5 ± 10.6 to 88.5 ± 9.3 and the VAS of the ankle decreased from 4.7 ± 1.6 to 1.2 ± 1.1, whilst there were no changes on VAS and even the JOA and knee ROM after SMO (P > 0.05 for all). CONCLUSIONS: SMO can alleviate the symptoms of varus ankle osteoarthritis and delay the time for ankle replacement or arthrodesis by redistributing the abnormal stress of the ankle and restoring the congruence of the tibiotalar joint. In addition, it did not induce the clinical symptoms of knee without compromising lower limb alignment or knee joint line orientation in the short term. LEVEL OF EVIDENCE: Level IV case series.

Primary arthrodesis versus open reduction and internal fixation following intra-articular calcaneal fractures: a weight-bearing CT analysis.

PURPOSE: To compare primary arthrodesis (PA) versus open reduction and internal fixation (ORIF) in displaced intra-articular calcaneal fractures (DIACFs), based on clinical outcome and 2D and 3D geometrical analyses obtained from weight-bearing (WB) cone-beam CT images. MATERIALS AND METHODS: In this prospective study, 40 patients with surgically treated calcaneal fractures were included, consisting of 20 PA and 20 ORIF patients. Weight-bearing cone-beam CT-images of the left and right hindfoot and forefoot were acquired on a Planmed Verity cone-beam CT-scanner after a minimum of 1-year follow-up. Automated 2D and 3D geometric analyses, i.e., (minimal and average) talo-navicular joint space, calcaneal pitch (CP), and Meary's angle (MA), were obtained for injured and healthy feet. Clinical outcomes were measured using the EQ5D and FFI questionnaires. RESULTS: Overall, there were no differences in baseline patient characteristics apart from age (p < 0.005). The calcaneal pitch in 2D after treatment by ORIF (13.8° ± 5.6) was closer to the uninjured side (18.1° ± 5.5) compared to PA (10.9° ± 4.5) (p < 0.001). Meary's angle in 2D was closer to the uninjured side (8.7° ± 6.3) after surgery in the PA cohort (7.0° ± 5.8) compared to the ORIF cohort (15.5° ± 5.9) (p = 0.046). In 3D measurements, CP was significantly decreased for both cohorts after surgery (- 4.09° ± 6.2) (p = 0.001). MA was not significantly affected overall or between cohorts in 3D. Clinical outcomes were not significantly different between the ORIF and PA cohorts. None of the radiographic measurements in 2D or 3D correlated with any of the clinical outcomes studied. CONCLUSION: Three-dimensional WB CT imaging enables functional 2D and 3D analyses under natural load in patients with complex calcaneal fractures. Based on clinical outcome, both PA and ORIF appear viable treatment options. Clinical correlation with geometrical outcomes remains to be established.

Partial weight-bearing following ankle fracture: what's the actual load in early recovery?

PURPOSE: This study investigates the learning efficacy for partial weight load before discharge as well as the impact of biofeedback during the learning process. METHODS: We monitored weight-bearing in 57 patients who had surgery for ankle fractures. Continuous measurements without and with biofeedback were performed in the early postoperative stage in order to, first, assess how well these patients could apply what they have learned before being discharged, and second, to examine the influence of biofeedback. RESULTS: Using conventional teaching methods, only about one-third of patients (36.8% on the ground and 29.2% on the stairs) were able to maintain a satisfactory load. One-fourth of the patients did not place any weight on their leg, which was shown to be due to excessive pain at the time of the measurement (p < 0.05). A further one-fourth loaded inadequately low, while the remainder loaded excessively. Patients benefited significantly from the activation of audio-visual biofeedback in real time. As a result, loads in a target zone between 15 and 30 kg could be significantly increased (p < 0.05). CONCLUSION: We conclude that the majority of ankle fracture patients were unable to learn partial weight bearing in the early postoperative stage using traditional techniques. Additionally, each patient's ability to carry out a given loading varied. Using an audio-visual real-time biofeedback modality led to significantly improved performance. These findings support the proposed utility of audiovisual feedback in early rehabilitation. With the use of outpatient real-time biofeedback systems, therapists will be able to respond specifically to the needs of each individual patient. TRIAL REGISTRATION: Trial registration: DRKS00031136, Registered 01.02.2023 - Retrospectively registered, https://www.drks.de/DRKS00031136.

Effect of early weight bearing program with conventional physiotherapy on functional outcomes in surgically treated proximal tibia fracture: a pilot randomized controlled trial.

INTRODUCTION: Patients are often instructed to avoid weight bearing on the proximal tibia for 6 - 12 weeks post-surgery to avoid fracture fixation failure. However, delayed weight bearing leads to delayed mobility, causing difficulties in daily activities; problems such as pain, limited knee ROM, reduced quadriceps muscle strength, and impaired functional outcomes are reported in long-term follow-up. This study primarily aimed to evaluate the feasibility and explore the effect size. The secondary aim was to determine the effectiveness of early weight bearing along with conventional physiotherapy on functional outcomes. MATERIALS AND METHODS: A single-blinded pilot randomized controlled trial with 30 participants with proximal tibia type I, II, and III fractures were included; they were randomized using computer-based software. Seven patients were lost to follow-up. Group I received early weight bearing along with conventional physiotherapy whereas Group II received restricted weight bearing along with conventional physiotherapy. Assessments were made on post-operative day 3 (POD-03), at discharge, at 6 weeks, and at 12 weeks. Radiographs were recorded immediately after the operation, at discharge, and at 12 weeks. RESULTS: A full-scale RCT is feasible with an effect size between 0.3 - 0.7. A statistically significant difference (p < 0.05) was found within both groups 12 weeks post-surgery in all outcome measures; the difference was more prominent in the intervention group. A statistically significant difference (p < 0.05) was found between both the groups post-12 weeks in all outcome measures except quadriceps isometric muscle strength. CONCLUSION: A full-scale RCT for early weight bearing along with conventional physiotherapy for patients operated for Type I, II, and III proximal tibia fracture is feasible. Early weight bearing along with conventional physiotherapy could have a positive effect on reducing patient's pain perception and increasing knee joint mobility, quadriceps isometric muscle strength, knee function, and quality of life without any adverse effects. TRIAL REGISTRATION: ClinicalTrialsRegistry.gov (CTRI/2022/10/046797).