Moorella sulfitireducens sp. nov., a thermophilic anaerobic bacterium isolated from a terrestrial thermal spring.

In hydrothermal ecosystems, the dissolution of sulfur dioxide in water results in the formation of sulfite, which can be used in microbial metabolism. A limited number of thermophiles have been isolated using sulfite as an electron acceptor. From a terrestrial thermal spring, Sakhalin Island, Russia, we isolated a thermophilic anaerobic bacterium (strain SLA38T). Cells of strain SLA38T were spore-forming straight rods. Growth was observed at temperatures 45-65 °C (optimum at 60 °C) and pH 5.5-9.0 (optimum at pH 6.5-7.0). The novel isolate was capable of anaerobic respiration with sulfite, thiosulfate, fumarate and perchlorate or fermentative growth. Strain SLA38T utilized glycerol, lactate, pyruvate and yeast extract. It grew lithoautotrophically on carbon monoxide with thiosulfate as electron acceptor, producing acetate. The genome size of the isolate was 2.9 Mbp and genomic DNA G + C content was 53.6 mol%. Analysis of the 16S rRNA gene sequences revealed that strain SLA38T belongs to the genus Moorella. Based on the physiological features and phylogenetic analysis, we propose to assign strain SLA38T to a new species of the genus Moorella, as Moorella sulfitireducens sp. nov. The type strain is SLA38T (= DSM 111068T = VKM B-3584T).

Formation Mechanism, Geometric Stability and Catalytic Activity of a Single Iron Atom Supported on N-Doped Graphene.

Based on density functional theory (DFT) calculations, the formation geometries, stability and catalytic properties of single-atom iron anchored on xN-doped graphene (xN-graphene-Fe, x=1, 2, 3) sheet are systemically investigated. It is found that the different kinds and numbers of gas reactants can effectively regulate the electronic structure and magnetic properties of the 3 N-graphene-Fe system. For NO and CO oxidation reactions, the coadsorption configurations of NO/O2 and CO/O2 molecules on a reactive substrate as the initial state are comparably analyzed. The NO oxidation reactions through the Langmuir-Hinshelwood (LH) and Eley-Rideal (ER) mechanisms have relatively smaller energy barriers than those of the CO oxidation processes. In comparison, the preadsorbed 2NO reacting with 2CO molecules (2NO+2CO→2CO2 +N2 ) through ER reactions (<0.4 eV) are energetically more favorable processes. These results can provide beneficial references for theoretical studies on NO and CO oxidation and designing graphene-based catalyst for toxic gas removal.

Catalytically Active Rh Sub-Nanoclusters on TiO2 for CO Oxidation at Cryogenic Temperatures.

The discovery that gold catalysts could be active for CO oxidation at cryogenic temperatures has ignited much excitement in nanocatalysis. Whether the alternative Pt group metal (PGM) catalysts can exhibit such high performance is an interesting research issue. So far, no PGM catalyst shows activity for CO oxidation at cryogenic temperatures. In this work, we report a sub-nano Rh/TiO2 catalyst that can completely convert CO at 223 K. This catalyst exhibits at least three orders of magnitude higher turnover frequency (TOF) than the best Rh-based catalysts and comparable to the well-known Au/TiO2 for CO oxidation. The specific size range of 0.4-0.8 nm Rh clusters is critical to the facile activation of O2 over the Rh-TiO2 interface in a form of Rh-O-O-Ti (superoxide). This superoxide is ready to react with the CO adsorbed on TiO2 sites at cryogenic temperatures.

Synthesis and Catalytic Performance of High-Entropy Rare-Earth Perovskite Nanofibers: (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3 in Low-Temperature Carbon Monoxide Oxidation.

This study investigated the catalytic properties of low-temperature oxidation of carbon monoxide, focusing on (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3 synthesized via a glycothermal method using 1,4-butanediol and diethylene glycol at 250 °C. This synthesis route bypasses the energy-intensive sintering process at 1200 °C while maintaining a high-entropy single-phase structure. The synthesized material was characterized structurally and chemically by X-ray diffraction and SEM/EDX analyses. The material was shown to form nanofibers of (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3, thereby increasing the active surface area for catalytic reactions, and crystallize in the model Pbnm space group of distorted perovskite cell. Using a custom setup to investigate catalytic properties of (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3, the CO oxidation behavior of those high-entropy perovskite oxide was investigated, showing an overall conversion of 78% at 50 °C and 97% at 100 °C. These findings highlight the effective catalytic activity of nanofibers of (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3 under mild conditions and their versatility in various catalytic processes of robust CO neutralization. The incorporation of rare-earth elements into a high-entropy structure could impart unique catalytic properties, promoting a synergistic effect that enhances performance.

Bacterial chemolithoautotrophy in ultramafic plumes along the Mid-Atlantic Ridge.

Hydrothermal vent systems release reduced chemical compounds that act as an important energy source in the deep sea. Chemolithoautotrophic microbes inhabiting hydrothermal plumes oxidize these compounds, in particular, hydrogen and reduced sulfur, to obtain the energy required for CO2 fixation. Here, we analysed the planktonic communities of four hydrothermal systems located along the Mid-Atlantic Ridge: Irinovskoe, Semenov-2, Logatchev-1, and Ashadze-2, by combining long-read 16S rRNA gene analysis, fluorescence in situ hybridization, meta-omics, and thermodynamic calculations. Sulfurimonas and SUP05 dominated the microbial communities in these hydrothermal plumes. Investigation of Sulfurimonas and SUP05 MAGs, and their gene transcription in plumes indicated a niche partitioning driven by hydrogen and sulfur. In addition to sulfur and hydrogen oxidation, a novel SAR202 clade inhabiting the plume, here referred to as genus Carboxydicoccus, harbours the capability for CO oxidation and CO2 fixation via reverse TCA cycle. Both pathways were also highly transcribed in other hydrogen-rich plumes, including the Von Damm vent field. Carboxydicoccus profundi reached up to 4% relative abundance (1.0 x 103 cell ml- 1) in Irinovskoe non-buoyant plume and was also abundant in non-hydrothermally influenced deep-sea metagenomes (up to 5 RPKM). Therefore, CO, which is probably not sourced from the hydrothermal fluids (1.9-5.8 µM), but rather from biological activities within the rising fluid, may serve as a significant energy source in hydrothermal plumes. Taken together, this study sheds light on the chemolithoautotrophic potential of the bacterial community in Mid-Atlantic Ridge plumes.

Short-Term Exposure to Thermophilic Temperatures Facilitates CO Uptake by Thermophiles Maintained under Predominantly Mesophilic Conditions.

Three phylogenetically and phenotypically distinct CO-oxidizing thermophiles (Alicyclobacillus macrosporangiidus CPP55 (Firmicutes), Meiothermus ruber PS4 (Deinococcus-Thermus) and Thermogemmatispora carboxidovorans PM5T (Chloroflexi)) and one CO-oxidizing mesophile (Paraburkholderia paradisi WAT (Betaproteobacteria)) isolated from volcanic soils were used to assess growth responses and CO uptake rates during incubations with constant temperatures (25 °C and 55 °C) and during multi-day incubations with a temperature regime that cycled between 20 °C and 55 °C on a diurnal basis (alternating mesophilic and thermophilic temperatures, AMTT). The results were used to test a conjecture that some thermophiles can survive in mesothermal habitats that experience occasional thermophilic temperatures. Meiothermus ruber PS4, which does not form spores, was able to grow and oxidize CO under all conditions, while the spore-forming Alicyclobacillus macrosporangiidus CPP55 grew and oxidized CO during the AMTT regime and at 55 °C, but was not active at 25 °C. Thermogemmatispora carboxidovorans PM5T, also a spore former, only grew at 55 °C but oxidized CO during AMTT and 55 °C incubations. In contrast, the non-sporing mesophile, Paraburkholderia paradisi WAT, was only able to grow and oxidize CO at 25 °C; growth and CO uptake ceased during the AMTT incubations after exposure to the initial round of thermophilic temperatures. Collectively, these results suggest that temporary, periodic exposure to permissive growth temperatures could help maintain populations of thermophiles in mesothermal habitats after deposition from the atmosphere or other sources.

Reduced graphene oxide as an effective promoter to the layered manganese oxide-supported Ag catalysts for the oxidation of ethyl acetate and carbon monoxide.

The layered manganese oxide (δ-MnO2)-supported reduced graphene oxide (rGO)-promoted silver catalysts (xAg- yrGO/δ-MnO2; x and y are the Ag and rGO contents (wt%), respectively) were prepared via a polyvinyl alcohol-protected reduction route. Physicochemical properties of these materials were determined using the numerous techniques, and their catalytic activities were evaluated for the oxidation of CO and ethyl acetate. It is found that the loading of rGO as an electron transfer promoter could significantly strengthen the metal-support interaction (SMSI) between Ag and δ-MnO2 and increase specific surface area of the sample, hence improving catalytic performance of the sample. Activity evaluation reveals that 1Ag- 1.0rGO/δ-MnO2 showed the best catalytic activity and the lowest apparent activation energy (Ea), giving a T90% of 140 °C and an Ea of 42.7 kJ/mol for CO oxidation, and a T90% of 160 °C and an Ea of 39.8 kJ/mol for ethyl acetate oxidation at space velocity (SV) = 60,000 mL/(g h). The good performance of 1Ag- 1.0rGO/δ-MnO2 was associated with its high Mn3+/Mn4+ or Oads/Olatt molar ratio, good low-temperature reducibility, and strong SMSI between Ag and δ-MnO2. The in situ DRIFTS characterization demonstrates that the carbonate and acetate species were the main intermediate products in CO and ethyl acetate oxidation over 1Ag- 1.0rGO/δ-MnO2, respectively. The 1Ag- 1.0rGO/δ-MnO2 sample was not significantly altered in physicochemical property after 55 h of stability test, but its activity decreased in the presence of water vapor, especially such an effect on ethyl acetate oxidation was more obvious, which was possibly due to the competitive adsorption of water and reactants on the catalyst surface.

M(II)Al4 Type Layered Double Hydroxides-Preparation Using Mechanochemical Route, Structural Characterization and Catalytic Application.

The synthesis of the copper-poor and aluminum-rich layered double hydroxides (LDHs) of the CuAl4 type was optimized in detail in this work, by applying an intense mechanochemical treatment to activate the gibbsite starting reagent. The phase-pure forms of these LDHs were prepared for the first time; using copper nitrate and perchlorate salts during the syntheses turned out to be the key to avoiding the formation of copper hydroxide sideproducts. Based on the use of the optimized syntheses parameters, the preparation of layered triple and multiple hydroxides was also attempted using Ni(II), Co(II), Zn(II) and even Mg(II) ions. These studies let us identify the relative positions of the incorporating cations in the well-known selectivity series as Ni2+ >> Cu2+ >> Zn2+ > Co2+ >> Mg2+. The solids formed were characterized by using powder X-ray diffractometry, UV-Vis diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. The catalytic potential of the samples was investigated in carbon monoxide oxidation reactions at atmospheric pressure, supported by an in situ diffuse reflectance infrared spectroscopy probe. All solids proved to be active and the combination of the nickel and cobalt incorporation (which resulted in a NiCoAl8 layered triple hydroxide) brought outstanding benefits regarding low-temperature oxidation and increased carbon monoxide conversion values.

Carbon Monoxide Oxidation over Gold Nanoparticles Deposited onto Alumina Film Grown on Mo(110) Substrate: An Effect of Charge Tunneling through the Oxide Film.

Formation of gold nanosized particles supported by aluminum oxide film grown on Mo(110) substrate and oxidation of carbon monoxide molecules on their surface have been in-situ studied in ultra-high vacuum by means of Auger electron spectroscopy (AES), reflection-absorption infrared spectroscopy (RAIRS), low energy electron diffraction (LEED), atomic force microscopy (AFM), temperature-programmed desorption (TPD), and work function measurements. The main focus was to follow how the thickness of the alumina film influences the efficiency of CO oxidation in an attempt to find out evidence of the possible effect of electron tunneling between the metal substrate and the Au particle through the oxide interlayer. Providing the largest degree of surface identity of the studied metal/oxide system at different thicknesses of the alumina film (two, four, six, and eight monolayers), it was found that the CO oxidation efficiency, defined as CO2 to CO TPD peaks intensity ratio, exponentially decays with the oxide film thickness growth. Taking into account the known fact that the CO oxidation efficiency depends on the amount of excess charge acquired by Au particle, the latter suggests that electron tunneling adds efficiency to the oxidation process, although not significantly.

The Role of Tungsten Oxide in Enhancing the Carbon Monoxide Tolerance of Platinum-Based Hydrogen Oxidation Catalysts.

Significant reductions in total cost of ownership can be realized by engineering PEM fuel cells to run on low-purity hydrogen. One of the main drawbacks of low-purity hydrogen fuels is the carbon monoxide fraction, which poisons platinum electrocatalysts and reduces the power output below useful levels. Platinum-tungsten oxide catalyst systems have previously shown high levels of CO tolerance during both ex situ and in situ investigations. In this work, we explore the mechanism of enhanced tolerance using in situ electrochemical attenuated total reflection-infrared (ATR-IR) and Raman spectroscopy methods and investigate, using a mixture of Pt/C and WO3 powders, the role of the WV/WVI redox couple in the oxidation of adsorbed CO.

Carbon Monoxide Oxidation over rGO-Mediated Gold/Cobalt Oxide Catalysts with Strong Metal-Support Interaction.

The strong interaction between Au nanoparticles and support (Au-metal oxide interface) usually governs the performance of a supported Au catalyst in heterogeneous catalysis. In this study, a series of Au/reduced graphene oxide (rGO)/three-dimensionally ordered macroporous (3DOM) Co3O4 catalysts with similar textural properties were prepared using the poly(methyl methacrylate)-templating and poly(vinyl alcohol)-protected reduction strategies. It was found that introducing reduced graphene oxide (rGO) as an electron-transfer bridge between Au and 3DOM Co3O4 could significantly strengthen the strong metal-support interaction (SMSI), thus enhancing the catalytic activity for CO oxidation. Among all of the catalysts, 1.86 wt % Au/2 wt % rGO/3DOM Co3O4 (1.86Au/2rGO/3DOM Co3O4) showed the highest catalytic activity: the CO reaction rate at 40 °C (432.8 µmol/(gAu s)) was 2 times higher than that (208.2 µmol/(gAu s)) over 1.87Au/3DOM Co3O4. The introduction of rGO could improve the activation of oxygen molecules and hence increase the low-temperature catalytic activity. The strategy for strengthening the SMSI via rGO mediation would guide the designing of highly efficient supported metal catalysts for low-temperature oxidation of CO.

Complementary energy acquisition via aerobic anoxygenic photosynthesis and carbon monoxide oxidation by Planktomarina temperata of the Roseobacter group.

In marine pelagic ecosystems energy is often the limiting factor for growth of heterotrophic bacteria. Aerobic anoxygenic photosynthesis (AAP) and oxidation of carbon monoxide (CO) are modes to acquire complementary energy, but their significance in abundant and characteristic pelagic marine bacteria has not been well studied. In long-term batch culture experiments we found that Planktomarina temperata RCA23, representing the largest and most prominent subcluster of the Roseobacter group, maintains 2-3-fold higher cell numbers in the stationary and declining phase when grown in a light-dark cycle relative to dark conditions. Light enables P. temperata to continue to replicate its DNA during the stationary phase relative to a dark control such that when reinoculated into fresh medium growth resumed two days earlier than in control cultures. In cultures grown in the dark and supplemented with CO, cell numbers in the stationary phase remained significantly higher than in an unsupplemented control. Furthermore, repeated spiking with CO until day 372 resulted in significant CO consumption relative to an unsupplemented control. P. temperata represents a prominent marine pelagic bacterium for which AAP and CO consumption, to acquire complementary energy, have been documented.

Isolation and characterization of extremely halophilic CO-oxidizing Euryarchaeota from hypersaline cinders, sediments and soils and description of a novel CO oxidizer, Haloferax namakaokahaiae Mke2.3T, sp. nov.

The phylogenetic affiliations of organisms responsible for aerobic CO oxidation in hypersaline soils and sediments were assessed using media containing 3.8 M NaCl. CO-oxidizing strains of the euryarchaeotes, Haloarcula, Halorubrum, Haloterrigena and Natronorubrum, were isolated from the Bonneville Salt Flats (UT) and Atacama Desert salterns (Chile). A halophilic euryarchaeote, Haloferax strain Mke2.3(T), was isolated from Hawai'i Island saline cinders. Haloferax strain Mke2.3(T) was most closely related to Haloferax larsenii JCM 13917(T) (97.0% 16S rRNA sequence identity). It grew with a limited range of substrates, and oxidized CO at a headspace concentration of 0.1%. However, it did not grow with CO as a sole carbon and energy source. Its ability to oxidize CO, its polar lipid composition, substrate utilization and numerous other traits distinguished it from H. larsenii JCM 13917(T), and supported designation of the novel isolate as Haloferax namakaokahaiae Mke2.3(T), sp. nov (= DSM 29988, = LMG 29162). CO oxidation was also documented for 'Natronorubrum thiooxidans' HG1 (Sorokin, Tourova and Muyzer 2005), N. bangense (Xu, Zhou and Tian 1999) and N. sulfidifaciens AD2(T) (Cui et al. 2007). Collectively, these results established a previously unsuspected capacity for extremely halophilic aerobic CO oxidation, and indicated that the trait might be widespread among the Halobacteriaceae, and occur in a wide range of hypersaline habitats.

Preparation and high catalytic performance of Au/3DOM Mn2O3 for the oxidation of carbon monoxide and toluene.

Three-dimensionally ordered macroporous (3DOM) Mn2O3 and its supported gold (xAu/3DOM Mn2O3, x=1.9-7.5wt%) nanocatalysts were prepared using the polymethyl methacrylate-templating and polyvinyl alcohol-protected reduction methods, respectively. The 3DOM Mn2O3 and xAu/3DOM Mn2O3 samples exhibited a surface area of 34-38m(2)/g. The Au nanoparticles (NPs) with a size of 3.0-3.5nm were uniformly dispersed on the skeletons of 3DOM Mn2O3. The 5.8Au/3DOM Mn2O3 sample performed the best, giving the T90% (the temperature required for a conversion of 90%) of -15°C at space velocity (SV)=20,000mL/(gh) for CO oxidation and 244°C at SV=40,000mL/(gh) for toluene oxidation. The apparent activation energies (30 and 54kJ/mol) over 5.8Au/3DOM Mn2O3 were much lower than those (80 and 95kJ/mol) over 3DOM Mn2O3 for CO and toluene oxidation, respectively. The effects of SV, water vapor, CO2, and SO2 on catalytic activity were also examined. It is concluded that the excellent catalytic performance of 5.8Au/3DOM Mn2O3 was associated with its high oxygen adspecies concentration, good low-temperature reducibility, and strong interaction between Au NPs and 3DOM Mn2O3 as well as high-quality porous architecture.