Autologous platelet concentrates in alveolar ridge preservation: A systematic review with meta-analyses.

In order to evaluate the therapeutic advantages of various autologous platelet concentrates (APC) as a single biomaterial during alveolar ridge preservation (ARP), a systematic review with meta-analyses was conducted. PubMed, EMBASE, Web of Science, and Scopus were screened for randomized controlled trials (RCTs) that were released prior to 2024. The selected papers compared an APC with either unassisted healing (blood clot) or another biomaterial during ARP (third molars were not included). The outcome parameters included alveolar bone dimension alterations, soft tissue healing, and post-op pain intensity. The search yielded 35 papers (33 studies), one applying platelet-rich plasma (PRP), six using plasma rich in growth factors (PRGF), and 28 using leukocyte- and platelet-rich fibrin (L-PRF). These studies showed a large heterogeneity (e.g., outcome parameters, timing, surgical approach, and inclusion criteria), which hindered drawing strong conclusions. In most studies, however, ARP with PRP, PRGF, and L-PRF alone produced faster soft tissue healing, less post-extraction pain, less alveolar ridge resorption, more socket bone fill, and a higher bone density when compared to unassisted (spontaneous) healing. The ultimate benefit appears to be significantly influenced by the surgical approach. Limited literature exists comparing APC with other biomaterials for ARP, resulting in inconclusive data. APC application for ARP is a promising strategy to improve soft and hard tissue healing and reduce post-extraction pain.

Flapless early implant placement into the uncalcified provisional matrix-Does it lead to osseointegration of the implant? A preclinical study.

AIM: To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels. MATERIALS AND METHODS: In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement. RESULTS: There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively). CONCLUSIONS: Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials.

Bone formation in large/moderate gap after immediate implantation in response to different treatments: a pre-clinical study in the canine posterior mandible.

OBJECTIVES: This study aims to investigate different treatments on new bone formation around immediate implants in the canine posterior mandible with varying sized mesial-distal gap. MATERIALS AND METHODS: The 4th premolar and the 1st molar of six Labrador dogs were extracted from the mandible, and 4 dental implants were placed 1 mm below the level of the buccal bone crest. Moderate/large mesial-distal gaps between the implants and the sockets were treated with one of four methods and divided into the following groups: (1) the blank group, (2) the collagen membrane (CM) group, (3) the deproteinized bovine bone mineral (DBBM) group, and (4) the DBBM + CM group. Sequential fluorescent labeling was performed at 4, 8, and 10 weeks after the operation. After 12 weeks, the dogs were euthanized, and specimens were collected for micro-CT scanning and histological analysis. RESULTS: The survival rate of immediate implant was 100%. Micro-CT showed significant differences in bone mineral density (BMD) and bone volume fraction (BVF) among groups (P = 0.040, P = 0.009); other indicators were not significantly different among groups. Histological analysis showed the proportion of new bone formation and bone-to-implant contact were not significantly different among groups. No significant difference in bone reduction height around dental implant among four groups and varied mesial-distal gap size. CONCLUSION: Owing to the restricted sample size, this pilot study lacks conclusive findings. Within the limitation, this study demonstrated that although DBBM significantly increase BMD and BVF, the use of DBBM/CM didn't significantly improve bone formation and healing in extraction sockets around the implants in both moderate and large mesial-distal gap. CLINICAL RELEVANCE: The use of deproteinized bovine bone in conjunction with collagen is a common practice in immediate implantation procedures in the posterior mandible. However, there is a lack of conclusive evidence regarding the timing and circumstances under which they should be employed.

Use of autologous tooth-derived material as a graft in the post-extraction socket. Split-mouth study with radiological and histological analysis.

BACKGROUND: The healing process after tooth removal involves bone remodelling which implies some loss of alveolar bone volume. Among materials proposed for minimising this remodelling and preserving the bone, autologous dental tissue is a promising option, but more data are needed. In this context, we evaluated size and density changes using cone beam computed tomography in autologous dental material (ADM)-preserved sockets compared to controls, and assessed biological responses by histological analysis. METHODS: A split-mouth study was conducted including 22 patients, who underwent removal of ≥ 2 single-rooted teeth with intact sockets, assigning one socket to the experimental group which received ADM for alveolar preservation and another to the control group, which only underwent blood clot stabilisation. Cone beam computed tomography was performed postoperatively (week 0) and at weeks 8 and 16 to assess socket size and bone density. Histological analysis was carried out on trephine biopsies taken (Ø4 × 4.5 mm) from the experimental group. RESULTS: Less horizontal shrinkage was observed in the ADM group, especially at week 16 considering the group-by-time interaction for the following variables: difference in height between the lingual and buccal alveolar crests (-1.00; p < .01; 95% CI: -0.28 - -1.73), and half-widths, measured as the distance from the long axis of the missing tooth to the buccal alveolar crest at 1 mm (-0.61; p < .01; 95% CI: -0.18 - -1.04) and at 3 mm (-0.56; p < .01; 95% CI: -0.15 - -0.97) below the crest, with mean decreases of 1.07 and 2.14 mm in height difference, 0.66 and 1.32 mm in half-width at 1 mm and 0.43 and 1.02 mm in half-width at 3 mm in ADM and control groups respectively. Densitometry analysis showed higher bone densities in Hounsfield units in the ADM group considering all factors analysed regardless of time point and socket third (coronal, middle, or apical). Histologically, there were no signs of inflammation or foreign body reaction, and dentin particles were surrounded by and in close contact with bone tissue. CONCLUSION: These results add to the evidence that dentin can be used successfully as a material for alveolar socket preservation, given its desirable mechanical and biological properties, and warrant larger studies.

Evaluation of the effects of platelet-rich fibrin and diode laser on gingival blood perfusion and early bone healing of the extraction socket: a randomized controlled clinical trial.

Evaluation and comparison of the effect of platelet-rich fibrin (PRF), diode laser, and combination of PRF and diode laser on gingival blood perfusion and early bone formation of the extraction socket. Forty maxillary premolar sockets were randomized to four groups: control group, PRF group, diode laser group, and PRF + diode laser group. Gingival blood perfusion was measured at preoperative and postoperative 1, 3, 7, and 30 days. Fractal dimension analysis was performed immediately after the procedure and in the postoperative first month. Gingival perfusions significantly increased during 1 week compared to baseline for all groups with a mean of -4.43 ± 3.20, -5.99 ± 3.68, -5.45 ± 3.01, and -4.78 ± 2.82 respectively, and were at baseline 1 month later. There were no statistically significant differences between the groups at any time point. Although the increase of fractal dimension was higher in the PRF or diode laser group than in the control group with a mean of 0.085 ± 0.05, 0.100 ± 0.04, and 0.072 ± 0.04 respectively, no statistically significant differences were detected. Fractal dimension was significantly greater in PRF + diode laser group than in the control group with a mean of 0.138 ± 0.05 (p = 0.04). PRF, diode laser, and PRF + diode laser did not significantly affect the gingival perfusion, and the combined application of PRF and diode laser had positive effects on early bone regeneration in the extraction socket. PRF, diode laser, and PRF + diode laser provide better tissue healing of the extraction socket.

Regeneration of sensory nerve branches in extraction socket and surrounding alveolar bone in rat: immunohistochemical observation of the axon and myelin sheath changes.

The purpose of this study was to investigate the process and derivation of the distribution of the sensory nerves that appear in the extraction socket and surrounding alveolar bone following tooth extraction. The right mandibular first molar of rats and periodontal ligament were extracted as a single mass, and the mandible was harvested after days 1, 3, 5, and 7 after extraction. Serial sections of 7 µm thickness were prepared for the proximal root (Section A), buccolingual root (Section B), and centrifugal root (Section C) of the first molar. H-E staining and immunohistochemical staining with anti-S100 antibody and anti-NF-L antibody were carried out. The presence of nerve fiber bundles in the blood clot was already evident on post-extraction day 3, and on post-extraction day 7. On day 3, the number of axons in Sections B and C had greatly decreased, indicating that, after extraction, the connection between peripheral nerve tissue and the trigeminal ganglion was temporarily markedly reduced in the region of the alveolar branch. Although the myelin sheaths were regenerating on day 5, the majority of the axons of the alveolar branches extending from the inferior alveolar nerve were seen to be extremely thin and scattered, despite their further regeneration. The above results suggest that the newly myelinated nerves are actually derived from the bone marrow to the extraction socket, so few nerves, rather than being derived from the alveolar branches that had innervated the extracted tooth.

Single-rooted extraction socket classification: A systematic review and proposal of a new classification system based on morphologic and patient-related factors.

Taxonomy and classification of a disease contributes to facilitating the diagnosis and treatment planning process and simplifies communication between clinicians. The aim of this study was to provide a critical appraisal based on a systematic review of the single-rooted extraction socket (ES) classifications and subsequently, introduce a new classification system combining the cornerstones of the previously proposed systems and based on the latest consensus in implant dentistry. Following the systematic search process in PubMed, EMBASE, and SCOPUS databases 13 ES classifications were detected. The most repeated hard and soft tissue factors in the previous classifications were buccal bone dehiscence, interproximal bone, gingival recession, and soft tissue phenotype. However, there was minimal attention to patient-related factors such as systemic conditions and smoking. Therefore, a new classification system based on the combination of patient-related factors, clinical and radiographical parameters was proposed. This divides an ES into three types. Class I and II sockets are candidates for receiving immediate implant placement and conversely, a class III socket includes a compromised condition that requires multiple-stage reconstruction mostly suitable for standard delayed implant placement with alveolar ridge preservation. Within the limitations of this study, the new classification system not only provides comprehensive inclusion of various crucial parameters in implant placement (such as prediction of future implant position and osteotomy difficulty, etc.) but also, in contrast to the previously introduced systems, is able to classify the ES prior to extraction and also, takes into the account the patient-related factors as the class modifiers following the extraction.

The Bone Bridge Technique Utilizing Bone from the Lateral Wall of the Maxillary Sinus for Ridge Augmentation: Case Reports of a 1-7 Year Follow-Up.

The post-extraction socket of a periodontally compromised tooth/implant is oftentimes accompanied by a very wide-deep alveolar ridge defect. The commonly utilized treatment is ridge preservation followed by delayed implant placement 4 to 6 months after extraction. In the four cases presented in this study, a novel technique of utilizing a bone block obtained from the lateral wall of the maxillary sinus is introduced. Due to the severe localized vertical ridge deficiency, an intraoral autogenous bone block was obtained from the ipsilateral sinus bony window. After the obtained bone block was properly trimmed, it was fixed in the form of a bridge over the vertical defect by the press-fit method. In two cases, the gap between the autogenous bone and defect was filled with a particulate synthetic bone graft, and in another two cases, the gap was left without grafting. All cases were covered with a resorbable collagen membrane. At the time of re-entry after 5 to 6 months, the bone bridge was well incorporated beside the adjacent native bone and helped by the implant placement. Uncovering was performed after 3 to 6 months, and prostheses were delivered after 2 months. Oral function was maintained without any change in the marginal bone level even after the 1- to 7-year post-prosthesis delivery. This case series showed that the bone bridge technique performed using an ipsilateral sinus bony window for a localized vertical deficiency of a post-extraction socket can be used for successful vertical ridge augmentation (VRA).

An innovative application of pre-medicated collagen sponges with regenerative biomaterials for management of an infected extraction socket: A case report.

Localized infection of the extraction socket can compromise bone quality and quantity within the socket and bone support for the adjacent dentition. These events can preclude immediate rehabilitative interventions, such as implant placement, and increase the technical sensitivity of guided bone regeneration procedures for successful tissue and bone gain. The use of local scaffolds containing effective antimicrobial agents may suppress local infection and facilitate the regenerative process related to the introduced bone graft particles and barrier collagen membrane. In this case report, pre-medicated collagen sponges containing chlorhexidine and metronidazole were used in conjunction with a bone graft and collagen membrane for guided tissue and bone regeneration, which was followed by delayed implant placement with 2 years of follow-up evaluations.

Yes-associated protein promotes bone healing after tooth extraction in mice.

In this study, a tooth extraction socket model was established in vivo, and Lv-YAP1-GFP, Lv-GFP or saline was injected locally into the extraction socket. Expression of markers of osteogenesis, osteoclastogenesis, adipogenesis, proliferation and apoptosis explore whether YAP can promote bone formation in the process of tooth extraction socket healing. 66 BALB/c mice were divided into 3 groups and underwent left maxillary first molar extraction, Lv-YAP1-GFP, Lv-GFP or saline was injected into the tooth extraction socket. The maxilla was harvested 1, 3, 7, and 10 days after operation for subsequent analysis by Micro-CT and immunohistochemical analysis. Quantitative analysis of the expression of TRAP, ALP, BMP2, RUNX2, Osterix, OCN, RANKL, PPARγ, and PCNA was conducted. The results of immunofluorescence showed that the lentivirus was successfully transfected into the extraction socket. On the middle and last stage of tooth extraction healing, results of Micro-CT showed that the BV/TV, Tb.Th and Tb.N were significantly higher in the experimental group, results of immunohistochemistry showed that the overexpression of YAP increase in the expression of BMP2, ALP, RUNX2, Osterix, OCN, and PCNA. The expression of PPARγ and TUNEL staining results were significantly lower in the experimental group. The expression of TRAP and RANKL showed no significant differences among the 3 groups. We conclude that YAP could promote bone formation in the middle and late stages of tooth extraction socket healing. The overexpression of YAP increased bone formation and cell proliferation, decreased adipogenic differentiation and apoptosis.

Use of transcortical miniscrews for alveolar ridge preservation following tooth extraction: A pilot study.

OBJECTIVES: The purpose of this split-mouth pilot study was to investigate the effects of a transcortical miniscrew placed over the buccal plate of an extraction socket for alveolar ridge preservation in humans. METHODS: One week after the extraction of bilateral maxillary premolars, cone-beam computed tomography (CBCT) and intraoral digital imaging were performed (T0). A transcortical miniscrew was placed over the buccal plate of the extraction socket on one side (experiment), and the extraction socket on the contralateral side was left untreated (control). Follow-up CBCT and intraoral digital imaging were performed at 8 months immediately after miniscrew removal (T8). Changes in the width of the alveolar bone and ridge were measure by superimposing T0 and T8 of CBCTs and intraoral digital scans. RESULTS: Six participants completed the study protocol. Overall, the experimental side with the miniscrew demonstrated less bone loss and less alveolar ridge reduction than the control side. Bone loss on the experimental side (0.7 ± 0.2 mm) was significantly less than that on the control side (1.3 ± 0.7 mm) at the apical level of the socket on axial CBCT imaging (Wilcoxon signed rank test, p = .031). The experimental side (-18 ± 8%) exhibited less reduction in the alveolar ridge width than the control side (-21 ± 12%) at the crestal level on coronal superimposition of the intraoral digital scans. CONCLUSIONS: Transcortical miniscrew placement over the buccal plate of the extraction socket resulted in less resorption of the alveolar ridge and bone 8 months after tooth extraction. CLINICAL TRIAL REGISTRATION: NCT03205800: Temporary Anchorage Devices for Ridge Preservation (TAD).

[Use of dental implants in orthopedic rehabilitation of patients in aesthetically important area]. / Ispol'zovanie dental'nykh implantatov pri ortopedicheskoi reabilitatsii patsientov v esteticheski znachimoi zone.

The article presents a review of scientific data of Russian and non-Russian works dedicated to the problem of instant dental implantation in the aesthetically important areas, i.e. the upper jaw. The paper considers such anatomical factors of unsatisfactory aesthetic treatment results as presence and thickness of vestibular alveola wall, pathophysiological processes occurring while extracting teeth in this area, presence of odontogenic inflammatory sites and traumatic injuries under root canal and orthopaedic treatment, impact of gum's biotype on the condition of soft tissue in the area of the future orthopaedic prothesis. Data used in the article suggests the necessity of thorough diagnostic with the help of up-to-date technologies such as Cone beam computer tomography (CBCT).

Alveolar ridge regeneration in two-wall-damaged extraction sockets of an in vivo experimental model.

AIM: To determine the healing outcome following grafting with deproteinized porcine bone mineral (DPBM) with or without collagen membrane coverage in two-wall (both buccal and lingual)-damaged extraction sockets. MATERIALS AND METHODS: Distal roots of three mandibular premolars in six beagle dogs were extracted, and the whole buccal and lingual bony walls were surgically removed. Three treatment protocols were then applied according to the following group allocation: no graft (None), grafting DPBM (BG), and grafting DPBM with coverage by a collagen membrane (BG + M). Two observational periods (2 and 8 weeks) were used with the split-mouth design, and quantitative and qualitative analyses were performed by microcomputed tomography and histology. RESULTS: The dimensions of the alveolar ridge at both grafted sites (BG and BG + M) remained similar to those of the pristine ridge in the histologic and radiographic analyses, whereas the ungrafted sites (None) collapsed both vertically and horizontally. Both grafting protocols produced substantial bony regeneration, but the addition of a covering membrane enhanced the proportion of mineralized tissue within the augmented area, and the BG + M group also showed a significantly larger area of regenerated ridge than the None group (p < .05). CONCLUSIONS: Bone grafting with collagen membrane can maintain the alveolar ridge dimensions with substantial bone regeneration in a two-wall-damaged extraction socket.

Immediate versus delayed application of bone morphogenetic protein-2 solution in damaged extraction sockets: a preclinical in vivo investigation.

OBJECTIVE: To compare the clinical, radiographic, and histological healing patterns between the immediate and delayed applications of bone morphogenetic protein-2 (BMP-2) in damaged extraction sockets in dogs. MATERIALS AND METHODS: The distal roots of the fourth premolars of the mandible were extracted bilaterally in five beagle dogs, and buccal bone defects (4 mm wide and 9 mm high) were surgically created. Collagenated biphasic calcium phosphate (CBCP) soaked for 10 min in 100 µL of BMP-2 solution was applied immediately to the defect site in the control group. In the test group, the BMP-2 solution of same dose was injected into the grafted site 2 weeks after grafting with a saline-soaked CBCP. The dogs were sacrificed 2 weeks later. Clinical, histological, and radiographic analyses were followed. RESULTS: Swelling and inflammatory reactions were predominantly observed in the control group at 2 weeks. The area of new bone formation was significantly larger in the control group compared with the test group (10.8 ± 7.0 mm2 [mean ± SD] and 6.3 ± 3.1 mm2, respectively; p = 0.043). No significant difference was found in ridge width at 2 mm, 4 mm and 6 mm below the lingual bone crest between the control (2.6 ± 1.0 mm, 3.2 ± 0.9 mm and 4.5 ± 0.5 mm, respectively) and test group (3.3 ± 1.0 mm, 3.7 ± 1.3 mm and 4.2 ± 1.0 mm; all p > 0.05). CONCLUSIONS: Delayed application of BMP-2 2 weeks after surgery did not show any advantage over immediate application of BMP-2 in terms of new bone formation. CLINICAL RELEVANCE: This study suggests that it might be better to apply BMP-2 immediately in alveolar ridge preservation, instead of delayed application, in order to enhance new bone formation.

Clinical benefits of ridge preservation for implant placement compared to natural healing in maxillary teeth: A retrospective study.

AIM: The purpose of this retrospective study was to determine clinical benefits of ridge preservation in terms of surgical invasiveness of implant placement compared to natural healing in the maxilla. MATERIALS & METHODS: This study included 178 patients with 206 implants placed at ridge-preserved sites and 493 patients with 656 implants placed at naturally healed sites in maxillary anterior and posterior regions. Patient- and implant-related data were collected from electronic dental records including additional augmentation procedures performed before or during implant placement and surgical complications. Cumulative survival rate was assessed using Kaplan-Meier method. The annual peri-implant marginal bone loss between the two groups was compared using the Mann-Whitney U test. RESULTS: The follow-up period was 24.4 ± 18.1 months (mean ± standard deviation) for ridge-preserved sites and 45.7 ± 29.6 months for naturally healed sites. Sinus augmentation was performed at similar frequencies in the two groups, but lateral approach was applied significantly more at naturally healed sites (37.2%) than ridge-preserved sites (8.3%, p ≤ .001). There was no intergroup difference in the cumulative survival rate or annual peri-implant marginal bone loss. CONCLUSION: Ridge preservation can be clinically beneficial for minimizing the invasiveness of implant surgery by simplifying the procedure when sinus augmentation is expected in the maxilla.

Hard and soft tissue alterations during the healing stage of immediate implant placement and provisionalization with or without connective tissue graft: A randomized clinical trial.

AIMS: To evaluate the hard and soft tissue alterations of immediately placed and provisionalized implants with or without connective tissue graft (CTG). MATERIALS AND METHODS: Single unsalvageable maxillary incisors were replaced with immediately placed and provisionalized implants in 42 participants. The patients were randomly assigned to receive simultaneous CTG (test group) and not receive CTG (control group). Digital impression and cone-beam computed tomography images were obtained before extraction and after 6 months. Mid-facial gingival margin migrations, soft tissue contour changes and hard tissue remodelling were analysed and compared between the two groups using three-dimensional superimposition method. RESULTS: Forty participants completed the study. The test group showed significantly less buccal tissue collapse in the area 2-5 mm apical to the gingival margin. In both groups, the mid-facial gingival margin migrated in an apico-palatal direction and the socket void, except for a triangular space in the bucco-coronal region, demonstrated radiographic new bone formation without statistically significant differences. CONCLUSIONS: The CTG used with immediate implant placement and provisionalization could compensate for the facial tissue collapse, but it did not benefit maintenance of the mid-facial gingival margin position during the 6-month follow-up. New bone formation observed radiographically can be expected in most areas of the socket void, regardless of CTG use (ChiCTR-1900028494).

Effects of local application of alendronate on early healing of extraction socket in dogs.

OBJECTIVE: The aim of the present study was to assess the effects of alendronate (ALN) on bone remodeling following tooth extraction in a dog model. MATERIAL AND METHODS: For the study, fifteen male Beagles dogs of approximately 12 months of age were used. Mesial roots of four mandibular premolars were endodontically treated, and the distal roots were removed. ALN concentrations of 0.5, 1, and 2 mg/mL were topically applied for 15 min, while a sterile saline was used as a negative control. After the healing period of 1, 2, and 8 weeks, the samples were analyzed by micro-CT and histology. RESULTS: Treatment with ALN increased vertical distance between the lingual and the buccal crestal bones. While the ALN-treated sockets had preserved more lingual bone areas, control sockets showed better preservation of the buccal bone areas. ALN treatment resulted in more osteoid formation within the extraction sockets compared with the control. Higher bone volume was found in ALN groups than in the control at 2-week and 8-week healing periods, reaching the significant difference only for the extraction sockets pooled for the ALN treatment. CONCLUSIONS: Although ALN treatment could not prevent buccal bone resorption following tooth extraction in dogs, it proved beneficial for the preservation of the lingual bone and formation of new bone within the socket. There was no clear relation between the ALN dosages and the alterations within the extraction sockets. CLINICAL RELEVANCE: ALN affects bone remodeling of the extraction socket. The optimal concentration remains to be determined in future studies.

Wound Healing and Cell Dynamics Including Mesenchymal and Dental Pulp Stem Cells Induced by Photobiomodulation Therapy: An Example of Socket-Preserving Effects after Tooth Extraction in Rats and a Literature Review.

High-intensity laser therapy (HILT) and photobiomodulation therapy (PBMT) are two types of laser treatment. According to recent clinical reports, PBMT promotes wound healing after trauma or surgery. In addition, basic research has revealed that cell differentiation, proliferation, and activity and subsequent tissue activation and wound healing can be promoted. However, many points remain unclear regarding the mechanisms for wound healing induced by PBMT. Therefore, in this review, we present an example from our study of HILT and PBMT irradiation of tooth extraction wounds using two types of lasers with different characteristics (diode laser and carbon dioxide laser). Then, the effects of PBMT on the wound healing of bone tissues are reviewed from histological, biochemical, and cytological perspectives on the basis of our own study of the extraction socket as well as studies by other researchers. Furthermore, we consider the feasibility of treatment in which PBMT irradiation is applied to stem cells including dental pulp stem cells, the theme of this Special Issue, and we discuss research that has been reported on its effect.

Modified IVAN Technique: Long-Term Follow-Up of 20 Cases Over 2 to 11 Years.

When natural teeth fail, frequently there is a loss of hard and soft tissue. This may complicate subsequent dental implant placement by creating insufficient bone to house the implant. This also occurs when the tooth has been missing for an extended period, especially in the premaxilla, where the bone is less dense and often lacks sufficient volume of facial bone. Site reconstruction to accommodate implant placement often requires both hard and soft tissue augmentation. The modified interpositional vascularized augmentation neogenesis (mIVAN) technique achieves the desired treatment goals in both delayed and immediate placement scenarios. The technique will be discussed as well as the long-term follow-up on 20 cases.

Safety and Efficacy of a New Synthetic Material Based on Monetite, Silica Gel, PS-Wallastonite, and a Hydroxyapatite Calcium Deficient: A Randomized Comparative Clinic Trial.

Background and Objectives: Maxillary bone defects related to post-extraction alveolar ridge resorption are usual. These defects may lead to failure in further surgical implant phases given the lack of bone volume to perform the dental implant. The objective of this clinical assay was to evaluate the safety and efficacy of an experimental synthetic bone substitute in the preservation of post-extraction maxillary alveoli. Materials and Methods: 33 voluntary patients who had at least one maxillary premolar tooth that was a candidate for exodontia (n = 39) and subsequent implant rehabilitation participated. The regenerated alveoli were monitored by means of periodic clinical examinations (days 9 ± 1, 21 ± 4, 42 ± 6, and 84 ± 6), measuring the height and width of the alveolar crest (days 0 and 180 ± 5), measurement of radiodensity using tomographic techniques (days 0-5 and 175 ± 5), and histological examination of biopsies collected at 180 ± 5 days. Results: No significant differences were observed during the entire follow-up period between the two groups with respect to the safety variables studied. A variation in width of -0.9 ± 1.3 mm and -0.6 ± 1.5 mm, and a variation in height of -0.1 ± 0.9 mm and -0.3 ± 0.7 mm was observed for experimental material Sil-Oss® and Bio-Oss®, respectively. The radiodensity of the alveoli regenerated with the experimental material was significantly lower than that corresponding to Bio-Oss®. However, the histological study showed greater osteoid matrix and replacement of the material with newformed bone in the implanted beds with the experimental material. Conclusions: Both materials can be used safely and proved equally effective in maintaining alveolar flange dimensions, they are also histologically biocompatible, bioactive and osteoconductive. The experimental material showed the advantage of being resorbable and replaced with newformed bone, in addition to promoting bone regeneration.