Effects of a force feedback function in a surgical robot on the suturing procedure.

BACKGROUND: Currently, widely used robotic surgical systems do not provide force feedback. This study aimed to evaluate the impact and benefits of a force feedback function on the suturing procedure. METHODS: Twenty surgeons were recruited and divided into young (Y-group, n = 11) and senior (S-group, n = 9) groups, based on their years of surgical experience. The effect of the force feedback function on suturing quality was evaluated using an objective assessment system (A-LAP mini, Kyoto Kagaku Co., Ltd., Kyoto, Japan). Each participant completed the suturing task on intestinal model sheets with the robotic contact force feedback on and off. The task accomplishment time (s), maximal force (Newton, N) applied to the robotic forceps, and quality of suturing (assessed by A-LAP mini) were recorded as performance parameters. RESULTS: In total, the maximal force applied to the robotic forceps was significantly decreased with the robotic force feedback switched on (median [interquartile range]: 2.8 N (2.3-3.2)) as compared with when the feedback was switched off (3.4 N (2.7-4.0), P < 0.001). The contact force feedback function did not affect the objectively assessed suturing score (18 points (17.7-19.0) versus 18 points (17.0-19.0), P = 0.421). The contact force feedback function slightly shortened the task accomplishment time in the Y-group (552.5 s (466.5-832) versus 605.5 s (476.2-689.7), P = 0.851) but not in the S-group (566 s (440.2-703.5) versus 470.5 s (419.7-560.2), P = 0.164). CONCLUSIONS: With the contact force feedback function, the suturing task was completed with a smaller maximal force, while maintaining the quality of suturing. Because the benefits are more apparent in young surgeons, robots with the contact force feedback function will facilitate the educational process in novice surgeons.

Can you feel the force just right? Tactile force feedback for training of minimally invasive surgery-evaluation of vibration feedback for adequate force application.

BACKGROUND: Tissue handling is a crucial skill for surgeons and is challenging to learn. The aim of this study was to develop laparoscopic instruments with different integrated tactile vibration feedback by varying different tactile modalities and assess its effect on tissue handling skills. METHODS: Standard laparoscopic instruments were equipped with a vibration effector, which was controlled by a microcomputer attached to a force sensor platform. One of three different vibration feedbacks (F1: double vibration > 2 N; F2: increasing vibration relative to force; F3: one vibration > 1.5 N and double vibration > 2 N) was applied to the instruments. In this multicenter crossover trial, surgical novices and expert surgeons performed two laparoscopic tasks (Peg transfer, laparoscopic suture, and knot) each with all the three vibration feedback modalities and once without any feedback, in a randomized order. The primary endpoint was force exertion. RESULTS: A total of 57 subjects (15 surgeons, 42 surgical novices) were included in the trial. In the Peg transfer task, there were no differences between the tactile feedback modalities in terms of force application. However, in subgroup analysis, the use of F2 resulted in a significantly lower mean-force application (p-value = 0.02) among the student group. In the laparoscopic suture and knot task, all participants exerted significantly lower mean and peak forces using F2 (p-value < 0.01). These findings remained significant after subgroup analysis for both, the student and surgeon groups individually. The condition without tactile feedback led to the highest mean and peak force exertion compared to the three other feedback modalities. CONCLUSION: Continuous tactile vibration feedback decreases the mean and peak force applied during laparoscopic training tasks. This effect is more pronounced in demanding tasks such as laparoscopic suturing and knot tying and might be more beneficial for students. Laparoscopic tasks without feedback lead to increased force application.

Effect of task-oriented training assisted by force feedback hand rehabilitation robot on finger grasping function in stroke patients with hemiplegia: a randomised controlled trial.

BACKGROUND: Over 80% of patients with stroke experience finger grasping dysfunction, affecting independence in activities of daily living and quality of life. In routine training, task-oriented training is usually used for functional hand training, which may improve finger grasping performance after stroke, while augmented therapy may lead to a better treatment outcome. As a new technology-supported training, the hand rehabilitation robot provides opportunities to improve the therapeutic effect by increasing the training intensity. However, most hand rehabilitation robots commonly applied in clinics are based on a passive training mode and lack the sensory feedback function of fingers, which is not conducive to patients completing more accurate grasping movements. A force feedback hand rehabilitation robot can compensate for these defects. However, its clinical efficacy in patients with stroke remains unknown. This study aimed to investigate the effectiveness and added value of a force feedback hand rehabilitation robot combined with task-oriented training in stroke patients with hemiplegia. METHODS: In this single-blinded randomised controlled trial, 44 stroke patients with hemiplegia were randomly divided into experimental (n = 22) and control (n = 22) groups. Both groups received 40 min/day of conventional upper limb rehabilitation training. The experimental group received 20 min/day of task-oriented training assisted by a force feedback rehabilitation robot, and the control group received 20 min/day of task-oriented training assisted by therapists. Training was provided for 4 weeks, 5 times/week. The Fugl-Meyer motor function assessment of the hand part (FMA-Hand), Action Research Arm Test (ARAT), grip strength, Modified Ashworth scale (MAS), range of motion (ROM), Brunnstrom recovery stages of the hand (BRS-H), and Barthel index (BI) were used to evaluate the effect of two groups before and after treatment. RESULTS: Intra-group comparison: In both groups, the FMA-Hand, ARAT, grip strength, AROM, BRS-H, and BI scores after 4 weeks of treatment were significantly higher than those before treatment (p < 0.05), whereas there was no significant difference in finger flexor MAS scores before and after treatment (p > 0.05). Inter-group comparison: After 4 weeks of treatment, the experimental group's FMA-Hand total score, ARAT, grip strength, and AROM were significantly better than those of the control group (p < 0.05). However, there were no statistically significant differences in the scores of each sub-item of the FMA-Hand after Bonferroni correction (p > 0.007). In addition, there were no statistically significant differences in MAS, BRS-H, and BI scores (p > 0.05). CONCLUSION: Hand performance improved in patients with stroke after 4 weeks of task-oriented training. The use of a force feedback hand rehabilitation robot to support task-oriented training showed additional value over conventional task-oriented training in stroke patients with hand dysfunction. CLINICAL TRIAL REGISTRATION INFORMATION: NCT05841108.

An intelligent grasper to provide real-time force feedback to shorten the learning curve in laparoscopic training.

BACKGROUND: A lack of force feedback in laparoscopic surgery often leads to a steep learning curve to the novices and traditional training system equipped with force feedback need a high educational cost. This study aimed to use a laparoscopic grasper providing force feedback in laparoscopic training which can assist in controlling of gripping forces and improve the learning processing of the novices. METHODS: Firstly, we conducted a pre-experiment to verify the role of force feedback in gripping operations and establish the safe gripping force threshold for the tasks. Following this, we proceeded with a four-week training program. Unlike the novices without feedback (Group A2), the novices receiving feedback (Group B2) underwent training that included force feedback. Finally, we completed a follow-up period without providing force feedback to assess the training effect under different conditions. Real-time force parameters were recorded and compared. RESULTS: In the pre-experiment, we set the gripping force threshold for the tasks based on the experienced surgeons' performance. This is reasonable as the experienced surgeons have obtained adequate skill of handling grasper. The thresholds for task 1, 2, and 3 were set as 0.731 N, 1.203 N and 0.938 N, respectively. With force feedback, the gripping force applied by the novices with feedback (Group B1) was lower than that of the novices without feedback (Group A1) (p < 0.005). During the training period, the Group B2 takes 6 trails to achieve gripping force of 0.635 N, which is lower than the threshold line, whereas the Group A2 needs 11 trails, meaning that the learning curve of Group B2 was significantly shorter than that of Group A2. Additionally, during the follow-up period, there was no significant decline in force learning, and Group B2 demonstrated better control of gripping operations. The training with force feedback received positive evaluations. CONCLUSION: Our study shows that using a grasper providing force feedback in laparoscopic training can help to control the gripping force and shorten the learning curve. It is anticipated that the laparoscopic grasper equipped with FBG sensor is promising to provide force feedback during laparoscopic training, which ultimately shows great potential in laparoscopic surgery.

HapticWhirl, a Flywheel-Gimbal Handheld Haptic Controller for Exploring Multimodal Haptic Feedback.

Most haptic actuators available on the market today can generate only a single modality of stimuli. This ultimately limits the capacity of a kinaesthetic haptic controller to deliver more expressive feedback, requiring a haptic controller to integrate multiple actuators to generate complex haptic stimuli, with a corresponding complexity of construction and control. To address this, we designed a haptic controller to deliver several modalities of kinaesthetic haptic feedback using a single actuator: a flywheel, the orientation of which is controlled by two gimbals capable of rotating over 360 degrees, in combination with a flywheel brake. This enables the controller to generate multiple haptic feedback modalities, such as torque feedback, impact simulation, low-frequency high-amplitude vibrations, inertial effects (the sensation of momentum), and complex haptic output effects such as the experience of vortex-like forces (whirl effects). By combining these diverse haptic effects, the controller enriches the haptic dimension of VR environments. This paper presents the device's design, implementation, and characterization, and proposes potential applications for future work.

Findings Favor Haptics Feedback in Virtual Simulation Surgical Education: An Updated Systematic and Scoping Review.

BACKGROUND: Virtual simulations (VSs) enhance clinical competencies and skills. However, a previous systematic review of 9 RCT studies highlighted a paucity of literature on the effects of haptic feedback in surgical VSs. An updated systematic and scoping review was conducted to encompass more studies and a broader range of study methodologies. METHODS: A systematic literature search was conducted on July 31, 2023, in MEDLINE, Embase, and Cochrane. English language studies comparing haptic vs non-haptic conditions and using VSs were included. Studies were evaluated and reported using PRISMA-ScR guidelines. RESULTS: Out of 2782 initial studies, 51 were included in the review. Most studies used RCT (21) or crossover (23) methodologies with medical residents, students, and attending physicians. Most used post-intervention metrics, while some used pre- and post-intervention metrics. Overall, 34 performance results from studies favored haptics, 3 favored non-haptics, and the rest showed mixed or equal results. CONCLUSION: This updated review highlights the diverse application of haptic technology in surgical VSs. Haptics generally enhances performance, complements traditional teaching methods, and offers personalized learning with adequate simulator validation. However, a sparsity of orienting to the simulator, pre-/post-study designs, and small sample sizes poses concerns with the validity of the results. We underscore the urgent need for standardized protocols, large-scale studies, and nuanced understanding of haptic feedback integration. We also accentuate the significance of simulator validation, personalized learning potential, and the need for researcher, educator, and manufacturer collaboration. This review is a guidepost for navigating the complexities and advancements in haptic-enhanced surgical VSs.

The size coding of responses: The size of switches and the force feedback.

We aimed to understand which factors have a functional role in the size coding of responses, either the size of the switches or the force required to trigger each switch. This question is of relevance because it allows a better understanding of processes underlying action coding. In each trial, participants saw a small or large object. Depending on its colour, the participants had to press one of two switches. In the "size" condition, the response device consisted of two switches of different visual size, but both required the same amount of force. In the "force-feedback" condition, the response device consisted in two switches of identical visual size, but one switch required more force than the other. We found a compatibility effect in the "size," not in the "force-feedback" condition, supporting that the size-coding of responses would be due to the size of the switches.

EMG feedback improves grasping of compliant objects using a myoelectric prosthesis.

BACKGROUND: Closing the control loop in myoelectric prostheses by providing artificial somatosensory feedback is recognized as an important goal. However, designing a feedback interface that is effective in realistic conditions is still a challenge. Namely, in some situations, feedback can be redundant, as the information it provides can be readily obtained through hearing or vision (e.g., grasping force estimated from the deformation of a compliant object). EMG feedback is a non-invasive method wherein the tactile stimulation conveys to the user the level of their own myoelectric signal, hence a measurement intrinsic to the interface, which cannot be accessed incidentally. METHODS: The present study investigated the efficacy of EMG feedback in prosthesis force control when 10 able-bodied participants and a person with transradial amputation used a myoelectric prosthesis to grasp compliant objects of different stiffness values. The performance with feedback was compared to that achieved when the participants relied solely on incidental cues. RESULTS: The main outcome measures were the task success rate and completion time. EMG feedback resulted in significantly higher success rates regardless of pin stiffness, indicating that the feedback enhanced the accuracy of force application despite the abundance of incidental cues. Contrary to expectations, there was no difference in the completion time between the two feedback conditions. Additionally, the data revealed that the participants could produce smoother control signals when they received EMG feedback as well as more consistent commands across trials, signifying better control of the system by the participants. CONCLUSIONS: The results presented in this study further support the efficacy of EMG feedback when closing the prosthesis control loop by demonstrating its benefits in particularly challenging conditions which maximized the utility of intrinsic feedback sources.

[Research Progress and Prospect Analysis of Vascular Interventional Surgical Robot].

Vascular interventional surgery is an important means to treat cardiovascular and cerebrovascular diseases, but the particularity of its working environment will bring greater radiation threat to doctors. Vascular interventional surgery robots can effectively improve the working environment of doctors and can provide more stable operations, improve the success rate of surgery. This study mainly introduces the current research status, key technologies, and future application of vascular interventional surgical robots.

Evaluation of a New Virtual Reality Concept Teaching K-Wire Drilling With Force Feedback Simulated Haptic in Orthopedic Skills Training.

PURPOSE: Surgical simulations are becoming increasingly relevant in musculoskeletal training. They provide the opportunity to develop surgical skills in a controlled environment while reducing the risks for patients. For K-wire internal fixation in musculoskeletal surgery, a force feedback virtual reality (VR) simulator was developed. The aim of this study was to evaluate training results using this technology and compare the results with that of standard teaching on cadavers. METHODS: Twenty participants attending an AO Trauma Course during 2020 were randomly allocated in 2 groups. On day 1, group A was trained by senior surgeons using a cadaver and group B was trained by the VR simulator for K-wire insertion in the distal radius. On day 2, all participants performed K-wire insertion on the cadaver model, without assistance, to validate the training effect. RESULTS: On a surgical skills test, group B performed better than group A. In group B, the entry point of the first K-wire was closer to the targeted styloid process of the radius, and the protrusion of the K-wires into soft tissue was less than that in group A. CONCLUSIONS: Training with the VR simulator for K-wire insertion resulted in better surgical skills than training by a surgeon and cadaver model. CLINICAL RELEVANCE: Training with the VR simulator provides the opportunity to improve and refine surgical skills without the risk of harming patients. It offers easier access, unlimited repetitions, and is more cost-effective compared with training sessions with cadavers.

Adaptive Ascent Control of a Collaborative Object Transportation System Using Two Quadrotors.

The paper focuses on the issue of collaborative control of a two quadrotor (Unmanned Aerial Vehicle QDR) system. In particular, two quadrotors perform the task of horizontally transporting a long payload along a predefined trajectory. A leader-follower method is used to synchronize the motion of both QDRs. Conventional PD controllers drive the motion of the leader QDR-L to follow a predefined trajectory. To control a follower QDR-F drive, in the case of indoor applications, a Position Feedback Controller approach (PFC) can be used. To control the QDR-F, the PFC system uses the position information of QDR-L and the required accurate tracking cameras. In our solution, outdoor applications are considered, and usage of the Global Positioning System (GPS) is needed. However, GPS errors can adversely affect the system's stability. The Force Feedback Controller approach (FFC) is therefore implemented to control the QDR-F motion. The FFC system assumes a rigid gripping of payload by both QDRs. The QDR-F collaborative motion is controlled using the feedback contact forces and torques acting on it due to the motion of the QDR-L. For FFC implementation, the principle of admittance control is used. The admittance controller simulates a virtual "mass-spring-damper" system and drives the motion of the QDR-F according to the contact forces. With the FFC control scheme, the follower QDR-F can be controlled without using the QDR-L positional feedback and the GPS. The contribution to the quality of payload transportation is the novelty of the article. In practice, one of the requirements may be to maintain the horizontal position of the payload. In this paper, an original solution is presented to minimize the horizontal position difference of both QDRs. A new procedure of the transfer admittance controller adaptation according to the mass of the transported payload is designed. The adaptive admittance FFC system is implemented in a Matlab-Simulink environment. The effectiveness of its trajectory tracking and horizontal stabilization functions for variations of the payload mass are demonstrated by numerical calculations.

Quantitative Evaluation System of Wrist Motor Function for Stroke Patients Based on Force Feedback.

Motor function evaluation is a significant part of post-stroke rehabilitation protocols, and the evaluation of wrist motor function helps provide patients with individualized rehabilitation training programs. However, traditional assessment is coarsely graded, lacks quantitative analysis, and relies heavily on clinical experience. In order to objectively quantify wrist motor dysfunction in stroke patients, a novel quantitative evaluation system based on force feedback and machine learning algorithm was proposed. Sensors embedded in the force-feedback robot record the kinematic and movement data of the subject, and the rehabilitation doctor used an evaluation scale to score the wrist function of the subject. The quantitative evaluation models of wrist motion function based on random forest (RF), support vector machine regression (SVR), k-nearest neighbor (KNN), and back propagation neural network (BPNN) were established, respectively. To verify the effectiveness of the proposed quantitative evaluation system, 25 stroke patients and 10 healthy volunteers were recruited in this study. Experimental results show that the evaluation accuracy of the four models is all above 88%. The accuracy of BPNN model is 94.26%, and the Pearson correlation coefficient between model prediction and clinician scores is 0.964, indicating that the BPNN model can accurately evaluate the wrist motor function for stroke patients. In addition, there was a significant correlation between the prediction score of the quantitative assessment system and the physician scale score (p < 0.05). The proposed system enables quantitative and refined assessment of wrist motor function in stroke patients and has the feasibility of helping rehabilitation physicians in evaluating patients' motor function clinically.

A Cost-Effective, Integrated Haptic Device for an Exoskeletal System.

The paper presents an innovative integrated sensor-effector designed for use in exoskeletal haptic devices. The research efforts aimed to achieve high cost-effectiveness for a design assuring proper monitoring of joint rotations and providing passive force feedback. A review of market products revealed that there is space for new designs of haptic devices with such features. To determine the feasibility of the proposed solution, a series of simulations and experiments were conducted to verify the adopted design concept. The focus was set on an investigation of the force of attraction between one and two magnets interacting with a steel plate. Further, a physical model of an integrated joint was fabricated, and its performance was evaluated and compared to a similar commercially available device. The proposed solution is cost-effective due to the use of standard parts and inexpensive components. However, it is light and assures a 19 Nm braking torque adequate for the intended use as a haptic device for upper limbs.

A Transparent Teleoperated Robotic Surgical System with Predictive Haptic Feedback and Force Modelling.

In recent years, robotic minimally invasive surgery has transformed many types of surgical procedures and improved their outcomes. Implementing effective haptic feedback into a teleoperated robotic surgical system presents a significant challenge due to the trade-off between transparency and stability caused by system communication time delays. In this paper, these time delays are mitigated by implementing an environment estimation and force prediction methodology into an experimental robotic minimally invasive surgical system. At the slave, an exponentially weighted recursive least squares (EWRLS) algorithm estimates the respective parameters of the Kelvin-Voigt (KV) and Hunt-Crossley (HC) force models. The master then provides force feedback by interacting with a virtual environment via the estimated parameters. Palpation experiments were conducted with the slave in contact with polyurethane foam during human-in-the-loop teleoperation. The experimental results indicated that the prediction RMSE of error between predicted master force feedback and measured slave force was reduced to 0.076 N for the Hunt-Crossley virtual environment, compared to 0.356 N for the Kelvin-Voigt virtual environment and 0.560 N for the direct force feedback methodology. The results also demonstrated that the HC force model is well suited to provide accurate haptic feedback, particularly when there is a delay between the master and slave kinematics. Furthermore, a haptic feedback approach that incorporates environment estimation and force prediction improve transparency during teleoperation. In conclusion, the proposed bilateral master-slave robotic system has the potential to provide transparent and stable haptic feedback to the surgeon in surgical robotics procedures.

[Research on real-time detection system of catheter delivering force in vascular interventional robots].

In existing vascular interventional surgical robots, it is difficult to accurately detect the delivery force of the catheter/guidewire at the slave side. Aiming to solve this problem, a real-time force detection system was designed for vascular interventional surgical (VIS) robots based on catheter push force. Firstly, the transfer process of catheter operating forces in the slave end of the interventional robot was analyzed and modeled, and the design principle of the catheter operating force detection system was obtained. Secondly, based on the principle of stress and strain, a torque sensor was designed and integrated into the internal transmission shaft of the slave end of the interventional robot, and a data acquisition and processing system was established. Thirdly, an ATI high-precision torque sensor was used to build the experimental platform, and the designed sensor was tested and calibrated. Finally, sensor test experiments under ideal static/dynamic conditions and simulated catheter delivery tests based on actual human computed tomography (CT) data and vascular model were carried out. The results showed that the average relative detection error of the designed sensor system was 1.26% under ideal static conditions and 1.38% under ideal dynamic stability conditions. The system can detect on-line catheter operation force at high precision, which is of great significance towards improving patient safety in interventional robotic surgery.

Sensorimotor impairment and haptic support in microgravity.

Future space missions envisage human operators teleoperating robotic systems from orbital spacecraft. A potential risk for such missions is the observation that sensorimotor performance deteriorates during spaceflight. This article describes an experiment on sensorimotor performance in two-dimensional manual tracking during different stages of a space mission. We investigated whether there are optimal haptic settings of the human-machine interface for microgravity conditions. Two empirical studies using the same task paradigm with a force feedback joystick with different haptic settings (no haptics, four spring stiffnesses, two motion dampings, three masses) are presented in this paper. (1) A terrestrial control study ([Formula: see text] subjects) with five experimental sessions to explore potential learning effects and interactions with haptic settings. (2) A space experiment ([Formula: see text] cosmonauts) with a pre-mission, three mission sessions on board the ISS (2, 4, and 6 weeks in space), and a post-mission session. Results provide evidence that distorted proprioception significantly affects motion smoothness in the early phase of adaptation to microgravity, while the magnitude of this effect was moderated by cosmonauts' sensorimotor capabilities. Moreover, this sensorimotor impairment can be compensated by providing subtle haptic cues. Specifically, low damping improved tracking smoothness for both motion directions (sagittal and transverse motion plane) and low stiffness improved performance in the transverse motion plane.

Impact of haptic feedback on applied intracorporeal forces using a novel surgical robotic system-a randomized cross-over study with novices in an experimental setup.

BACKGROUND: Most currently used surgical robots have no force feedback; the next generation displays forces visually. A novel single-port robotic surgical system called FLEXMIN has been developed. Through an outer diameter of 38 mm, two instruments are teleoperated from a surgeon's control console including true haptic force feedback. One additional channel incorporates a telescope, another is free for special instrument functions. METHODS: This randomized cross-over study analyzed the effect of haptic feedback on the application of intracorporeal forces. In a standardized experiment setup, the subjects had to draw circles with the surgical robot as gently as possible. The applied forces, the required time spans, and predefined error rates were measured. RESULTS: Without haptic feedback, the maximum forces (median/IQR) were 6.43 N/2.96 N. With haptic feedback, the maximum forces were lower (3.57 N/1.94 N, p < 0.001). Also, the arithmetic means of the force progression (p < 0.001) and their standard deviations (p < 0.001) were lower. Not significant were the shorter durations and lower error rates. No sequence effect of force or duration was detected. No characteristic learning or fatigue curve was observed. CONCLUSIONS: In the experiment setup, the true haptic force feedback can reduce the applied intracorporeal robotic force to one-half when considering the aspects maximum, means, and standard deviation. Other test tasks are needed to validate the influence of force feedback on surgical efficiency and safety.

Immersive augmented reality system for the training of pattern classification control with a myoelectric prosthesis.

BACKGROUND: Hand amputation can have a truly debilitating impact on the life of the affected person. A multifunctional myoelectric prosthesis controlled using pattern classification can be used to restore some of the lost motor abilities. However, learning to control an advanced prosthesis can be a challenging task, but virtual and augmented reality (AR) provide means to create an engaging and motivating training. METHODS: In this study, we present a novel training framework that integrates virtual elements within a real scene (AR) while allowing the view from the first-person perspective. The framework was evaluated in 13 able-bodied subjects and a limb-deficient person divided into intervention (IG) and control (CG) groups. The IG received training by performing simulated clothespin task and both groups conducted a pre- and posttest with a real prosthesis. When training with the AR, the subjects received visual feedback on the generated grasping force. The main outcome measure was the number of pins that were successfully transferred within 20 min (task duration), while the number of dropped and broken pins were also registered. The participants were asked to score the difficulty of the real task (posttest), fun-factor and motivation, as well as the utility of the feedback. RESULTS: The performance (median/interquartile range) consistently increased during the training sessions (4/3 to 22/4). While the results were similar for the two groups in the pretest, the performance improved in the posttest only in IG. In addition, the subjects in IG transferred significantly more pins (28/10.5 versus 14.5/11), and dropped (1/2.5 versus 3.5/2) and broke (5/3.8 versus 14.5/9) significantly fewer pins in the posttest compared to CG. The participants in IG assigned (mean ± std) significantly lower scores to the difficulty compared to CG (5.2 ± 1.9 versus 7.1 ± 0.9), and they highly rated the fun factor (8.7 ± 1.3) and usefulness of feedback (8.5 ± 1.7). CONCLUSION: The results demonstrated that the proposed AR system allows for the transfer of skills from the simulated to the real task while providing a positive user experience. The present study demonstrates the effectiveness and flexibility of the proposed AR framework. Importantly, the developed system is open source and available for download and further development.

Collaborative Robotic Assistant Platform for Endonasal Surgery: Preliminary In-Vitro Trials.

Endonasal surgery is a minimally invasive approach for the removal of pituitary tumors (sarcomas). In this type of procedure, the surgeon has to complete the surgical maneuvers for sarcoma resection with extreme precision, as there are many vital structures in this area. Therefore, the use of robots for this type of intervention could increase the success of the intervention by providing accurate movements. Research has focused on the development of teleoperated robots to handle a surgical instrument, including the use of virtual fixtures to delimit the working area. This paper aims to go a step further with a platform that includes a teleoperated robot and an autonomous robot dedicated to secondary tasks. In this way, the aim is to reduce the surgeon's workload so that he can concentrate on his main task. Thus, the article focuses on the description and implementation of a navigator that coordinates both robots via a force/position control. Finally, both the navigation and control scheme were validated by in-vitro tests.

Realization of Force Detection and Feedback Control for Slave Manipulator of Master/Slave Surgical Robot.

Robot-assisted minimally invasive surgery (MIS) has received increasing attention, both in the academic field and clinical operation. Master/slave control is the most widely adopted manipulation mode for surgical robots. Thus, sensing the force of the surgical instruments located at the end of the slave manipulator through the main manipulator is critical to the operation. This study mainly addressed the force detection of the surgical instrument and force feedback control of the serial surgical robotic arm. A measurement device was developed to record the tool end force from the slave manipulator. An elastic element with an orthogonal beam structure was designed to sense the strain induced by force interactions. The relationship between the acting force and the output voltage was obtained through experiment, and the three-dimensional force output was decomposed using an extreme learning machine algorithm while considering the nonlinearity. The control of the force from the slave manipulator end was achieved. An impedance control strategy was adopted to restrict the force interaction amplitude. Modeling, simulation, and experimental verification were completed on the serial robotic manipulator platform along with virtual control in the MATLAB/Simulink software environment. The experimental results show that the measured force from the slave manipulator can provide feedback for impedance control with a delay of 0.15 s.