Improved thermostability and robustness of L-arabinose isomerase by C-terminal elongation and its application in rare sugar production.

Rare sugar was defined as a sugar that occurs in very small quantities in nature. Among them, l-ribose and d-tagatose were of high added value and useful as pharmaceutical intermediate for anti-HBV drugs or low calorie sweetener in food industry. Bio-production of the two rare sugar from biomass waste has not been investigated. Hence, development of a feasible and efficient co-production method was of practical usage. However, lack of suitable biocatalyst has become a bottleneck. By sequence alignment and analysis, a C-terminal α-helix from l-arabinose isomerase (L-AI) family was selected as a tool for protein engineering. This α-helix was ligated to C-terminal of Lactobacillus fermentum L-AI (LFAI) and significantly enhanced its thermostability and robustness for both l-arabinose and galactose catalysis. The mutant LFAI-C4 enzyme was immobilized by alginate and antimicrobial peptide poly-l-lysine, and was used to convert pretreated corncob acid hydrolysate (PCAH) into l-ribulose and d-tagatose in the presence of boric acid. In addition, we identified and immobilized a novel thermostable mannose-6-phosphate isomerase from Bacillus subtilis (BsMPI-2) which was efficient in catalyzing retaining l-ribulose into l-ribose and showing no activity on d-tagatose. The dual immobilized enzymes (LFAI-C4 and BsMPI-2) system co-produced 191.9 g/L l-ribose and 80.1 g/L d-tagatose, respectively. Showing a total yield of 46.6% from l-arabinose to l-ribose, which was the highest among reported. The dual immobilized enzymes system preserved 82% activity after 40 batches reaction, showing excellent potentials for industrial use. This study presents a promising alternative for rare sugar production from low-value raw material and showed satisfied conversion rate, product concentration, and operation stability.

An overview of D-galactose utilization through microbial fermentation and enzyme-catalyzed conversion.

D-Galactose is an abundant carbohydrate monomer in nature and widely exists in macroalgae, plants, and dairy wastes. D-Galactose is useful as a raw material for biomass fuel production or low-calorie sweetener production, attracting increased attention. This article summarizes the studies on biotechnological processes for galactose utilization. Two main research directions of microbial fermentation and enzyme-catalyzed conversion from galactose-rich biomass are extensively reviewed. The review provides the recent discoveries for biofuel production from macroalgae, including the innovative methods in the pretreatment process and technological development in the fermentation process. As modern people pay more attention to health, enzyme technologies for low-calorie sweetener production are more urgently needed. D-Tagatose is a promising low-calorie alternative to sugar. We discuss the recent studies on characterization and genetic modification of L-arabinose isomerase to improve the bioconversion of D-galactose to D-tagatose. In addition, the trends and critical challenges in both research directions are outlined at the end. KEY POINTS: • The value and significance of galactose utilization are highlighted. • Biofuel production from galactose-rich biomass is accomplished by fermentation. • L-arabinose isomerase is a tool for bioconversion of D-galactose to D-tagatose.

Expression and characterization of l-arabinose isomerase from Geobacillus stearothermophilus for improved activity under acidic condition.

A low-calorie sugar-substituting sweetener, d-tagatose, can be produced by l-arabinose isomerase (l-AI) from the substrate d-galactose. However, this process suffers from a Maillard reaction when performed at alkaline pH and high temperature. For industrial applications, therefore, a reaction under slightly acidic conditions is desirable to minimize the Maillard reaction. Previously, we obtained a mutant of l-AI, H18T, from Geobacillus stearothermophilus with greater substrate specificity. Although H18T possessed excellent thermostability, its activity under acidic conditions was not optimal. Here, we successfully obtained a potential variant of the H18T protein, H18T-Y234C, which achieved improved activity at pH 6.0, based on random mutagenesis using error-prone PCR around the binding pocket area of H18T. This double H18T-Y234C mutant possessed 1.8-fold and 3-fold higher activity at pH 6.0 than the parent H18T and the wild type, thereby broadening the optimal pH range to 6.0-8.0. Mutation from Tyr to Cys at residue 234 had little effect on the secondary structure of L-AI. Furthermore, the formation of disulfide bonds was not detected. Thus, the improvement of activity at pH 6.0 is probably caused by the change in the binding pocket area involving residue 234. This study offers insight into the importance of residue 234 in improving the activity under acidic conditions.

Towards efficient enzymatic conversion of D-galactose to D-tagatose: purification and characterization of L-arabinose isomerase from Lactobacillus brevis.

L-arabinose isomerase (L-AI) (EC 5. 3. 1. 4. L-AI) that mediates the isomerization of D-galactose to D-tagatose was isolated from Lactobacillus brevis (MF 465792), and was further purified and characterized. Pure enzyme with molecular weight of 60.1 kDa was successfully obtained after the purification using Native-PAGE gel extraction method, which was a monomer in solution. The L-AI was found to be stable at 45-75 °C, and at pH 7.0-9.0. Its optimum temperature and pH was determined as 65 °C and 7.0, respectively. Besides, we found that Ca2+, Cu2+, and Ba2+ ions inhibited the enzyme activity, whereas the enzyme activity was significantly enhanced in the presence of Mg2+, Mn2+, or Co2+ ions. The optimum concentration of Mn2+ and Co2+ was determined to be 1 mM. Furthermore, we characterized the kinetic parameters for L-AI and determined the Km (129 mM) and the Vmax (0.045 mM min- 1) values. Notably, L. brevisL-AI exhibited a high bioconversion yield of 43% from D-galactose to D-tagatose under the optimal condition, and appeared to be a more efficient catalyst compared with other L-AIs from various organisms.

Engineering the l-Arabinose Isomerase from Enterococcus Faecium for d-Tagatose Synthesis.

l-Arabinose isomerase (EC 5.3.1.4) (l-AI) from Enterococcus faecium DBFIQ E36 was overproduced in Escherichia coli by designing a codon-optimized synthetic araA gene. Using this optimized gene, two N- and C-terminal His-tagged-l-AI proteins were produced. The cloning of the two chimeric genes into regulated expression vectors resulted in the production of high amounts of recombinant N-His-l-AI and C-His-l-AI in soluble and active forms. Both His-tagged enzymes were purified in a single step through metal-affinity chromatography and showed different kinetic and structural characteristics. Analytical ultracentrifugation revealed that C-His-l-AI was preferentially hexameric in solution, whereas N-His-l-AI was mainly monomeric. The specific activity of the N-His-l-AI at acidic pH was higher than that of C-His-l-AI and showed a maximum bioconversion yield of 26% at 50 °C for d-tagatose biosynthesis, with Km and Vmax parameters of 252 mM and 0.092 U mg-1, respectively. However, C-His-l-AI was more active and stable at alkaline pH than N-His-l-AI. N-His-l-AI follows a Michaelis-Menten kinetic, whereas C-His-l-AI fitted to a sigmoidal saturation curve.

Immobilized Trienzymatic System with Enhanced Stabilization for the Biotransformation of Lactose.

The use of ketohexose isomerases is a powerful tool in lactose whey processing, but these enzymes can be very sensitive and expensive. Development of immobilized/stabilized biocatalysts could be a further option to improve the process. In this work, ß-galactosidase from Bacillus circulans, l-arabinose (d-galactose) isomerase from Enterococcus faecium, and d-xylose (d-glucose) isomerase from Streptomyces rubiginosus were immobilized individually onto Eupergit C and Eupergit C 250 L. Immobilized activity yields were over 90% in all cases. With the purpose of increasing thermostability of derivatives, two post-immobilization treatments were performed: alkaline incubation to favor the formation of additional covalent linkages, and blocking of excess oxirane groups by reacting with glycine. The greatest thermostability was achieved when alkaline incubation was carried out for 24 h, producing l-arabinose isomerase-Eupergit C derivatives with a half-life of 379 h and d-xylose isomerase-Eupergit C derivatives with a half-life of 554 h at 50 °C. Preliminary assays using immobilized and stabilized biocatalysts sequentially to biotransform lactose at pH 7.0 and 50 °C demonstrated improved performances as compared with soluble enzymes. Further improvements in ketohexose productivities were achieved when the three single-immobilizates were incubated simultaneously with lactose in a mono-reactor system.

Characterization of an L-arabinose isomerase from Bacillus coagulans NL01 and its application for D-tagatose production.

BACKGROUND: L-arabinose isomerase (AI) is a crucial catalyst for the biotransformation of D-galactose to D-tagatose. In previous reports, AIs from thermophilic bacterial strains had been wildly researched, but the browning reaction and by-products formed at high temperatures restricted their applications. By contrast, AIs from mesophilic Bacillus strains have some different features including lower optimal temperatures and lower requirements of metallic cofactors. These characters will be beneficial to the development of a more energy-efficient and safer production process. However, the relevant data about the kinetics and reaction properties of Bacillus AIs in D-tagatose production are still insufficient. Thus, in order to support further applications of these AIs, a comprehensive characterization of a Bacillus AI is needed. RESULTS: The coding gene (1422 bp) of Bacillus coagulans NL01 AI (BCAI) was cloned and overexpressed in the Escherichia coli BL21 (DE3) strain. The enzymatic property test showed that the optimal temperature and pH of BCAI were 60 °C and 7.5 respectively. The raw purified BCAI originally showed high activity in absence of outsourcing metallic ions and its thermostability did not change in a low concentration (0.5 mM) of Mn(2+) at temperatures from 70 °C to 90 °C. Besides these, the catalytic efficiencies (k cat/K m) for L-arabinose and D-galactose were 8.7 mM(-1) min(-1) and 1.0 mM(-1) min(-1) respectively. Under optimal conditions, the recombinant E. coli cell containing BCAI could convert 150 g L(-1) and 250 g L(-1) D-galactose to D-tagatose with attractive conversion rates of 32 % (32 h) and 27 % (48 h). CONCLUSIONS: In this study, a novel AI from B. coagulans NL01was cloned, purified and characterized. Compared with other reported AIs, this AI could retain high proportions of activity at a broader range of temperatures and was less dependent on metallic cofactors such as Mn(2+). Its substrate specificity was understood deeply by carrying out molecular modelling and docking studies. When the recombinant E. coli expressing the AI was used as a biocatalyst, D-tagatose could be produced efficiently in a simple one-pot biotransformation system.

Structure of the thermophilic l-Arabinose isomerase from Geobacillus kaustophilus reveals metal-mediated intersubunit interactions for activity and thermostability.

Thermophilic l-arabinose isomerase (AI), which catalyzes the interconversion of l-arabinose and l-ribulose, can be used to produce d-tagatose, a sugar substitute, from d-galactose. Unlike mesophilic AIs, thermophilic AIs are highly dependent on divalent metal ions for their catalytic activity and thermostability at elevated temperatures. However, the molecular basis underlying the substrate preferences and metal requirements of multimeric AIs remains unclear. Here we report the first crystal structure of the apo and holo forms of thermophilic Geobacillus kaustophilus AI (GKAI) in hexamer form. The structures, including those of GKAI in complex with l-arabitol, and biochemical analyses revealed not only how the substrate-binding site of GKAI is formed through displacement of residues at the intersubunit interface when it is bound to Mn(2+), but also revealed the water-mediated H-bonding networks that contribute to the structural integrity of GKAI during catalysis. These observations suggest metal-mediated isomerization reactions brought about by intersubunit interactions at elevated temperatures are responsible for the distinct active site features that promote the substrate specificity and thermostability of thermophilic AIs.

Chemical improvement of chitosan-modified beads for the immobilization of Enterococcus faecium DBFIQ E36 L-arabinose isomerase through multipoint covalent attachment approach.

D-tagatose is produced from D-galactose by the enzyme L-arabinose isomerase (L-AI) in a commercially viable bioprocess. An active and stable biocatalyst was obtained by modifying chitosan gel structure through reaction with TNBS, D-fructose or DMF, among others. This led to a significant improvement in L-AI immobilization via multipoint covalent attachment approach. Synthetized derivatives were compared with commercial supports such as Eupergit(®) C250L and glyoxal-agarose. The best chitosan derivative for L-AI immobilization was achieved by reacting 4 % (w/v) D-fructose with 3 % (w/v) chitosan at 50 °C for 4 h. When compared to the free enzyme, the glutaraldehyde-activated chitosan biocatalyst showed an apparent activity of 88.4 U g (gel) (-1) with a 211-fold stabilization factor while the glyoxal-agarose biocatalyst gave an apparent activity of 161.8 U g (gel) (-1) with an 85-fold stabilization factor. Hence, chitosan derivatives were comparable to commercial resins, thus becoming a viable low-cost strategy to obtain high active L-AI insolubilized derivatives.

Exploring an l-arabinose isomerase from cryophile bacteria Arthrobacter psychrolactophilus B7 for d-tagatose production.

A novel l-arabinose isomerase (L-AI) from Arthrobacter psychrolactophilus (Ap L-AI) was successfully cloned and characterized. The enzyme catalyzes the isomerization of d-galactose into a rare sugar d-tagatose. The recombinant Ap L-AI had an approximate molecular weight of about 258 kDa, suggesting it was an aggregate of five 58 kDa monomers and became the first record as a homo-pentamer L-AI. The catalytic efficiency (kcat/Km) and Km for d-galactose were 0.32 mM-1 min-1 and 51.43 mM, respectively, while for l-arabinose, were 0.64 mM-1 min-1 and 23.41 mM, respectively. It had the highest activity at pH 7.0-7.5 and 60 °C in the presence of 0.250 mM Mn2+. Ap L-AI was discovered to be an outstanding thermostable enzyme that only lost its half-life value at 60 °C for >1000 min. These findings suggest that l-arabinose isomerase from Arthrobacter psychrolactophilus is a promising candidate for d-tagatose mass-production due to its industrially competitive temperature.

Improving Catalytic Efficiency of L-Arabinose Isomerase from Lactobacillus plantarum CY6 towards D-Galactose by Molecular Modification.

L-Arabinose isomerase (L-AI) has been commonly used as an efficient biocatalyst to produce D-tagatose via the isomerization of D-galactose. However, it remains a significant challenge to efficiently synthesize D-tagatose using the native (wild type) L-AI at an industrial scale. Hence, it is extremely urgent to redesign L-AI to improve its catalytic efficiency towards D-galactose, and herein a structure-based molecular modification of Lactobacillus plantarum CY6 L-AI (LpAI) was performed. Among the engineered LpAI, both F118M and F279I mutants showed an increased D-galactose isomerization activity. Particularly, the specific activity of double mutant F118M/F279I towards D-galactose was increased by 210.1% compared to that of the wild type LpAI (WT). Besides the catalytic activity, the substrate preference of F118M/F279I was also largely changed from L-arabinose to D-galactose. In the enzymatic production of D-tagatose, the yield and conversion ratio of F118M/F279I were increased by 81.2% and 79.6%, respectively, compared to that of WT. Furthermore, the D-tagatose production of whole cells expressing F118M/F279I displayed about 2-fold higher than that of WT cell. These results revealed that the designed site-directed mutagenesis is useful for improving the catalytic efficiency of LpAI towards D-galactose.

L-arabinose isomerase from Lactobacillus fermentum C6: Enzymatic characteristics and its recombinant Bacillus subtilis whole cells achieving a significantly increased production of D-tagatose.

L-arabinose isomerase (L-AI) is a functional enzyme for the isomerizing of D-galactose to produce D-tagatose. In this study, L-AI-C6-encoding gene from the probiotic Lactobacillus fermentum C6 was cloned and expressed in Bacillus subtilis WB600 for investigating enzymatic characteristics and bioconverting D-tagatose by means of whole-cell catalysis. Results showed that the engineered B. subtilis WB600-pMA5-LAI achieved a maximum specific activity of L-AI-C6 (232.65 ± 15.54 U/mg protein) under cultivation in LB medium at 28 °C for 40 h. The recombinant L-AI-C6 was purified, and enzymatic characteristics test showed its optimum reaction temperature and pH at 60 °C and 8.0, respectively. In addition, L-AI-C6 exhibited good stability within the pH range of 5.5-9.0. By using B. subtilis WB600-pMA5-LAI cells as whole-cell catalyst, the highest D-tagatose yield reached 42.91 ± 0.28 % with D-galactose as substrate, which was 2.41 times that of L. fermentum C6 (17.79 ± 0.11 %). This suggested that the cloning and heterologous expression of L-AI-C6 was an effective strategy for improving D-tagatose conversion by whole-cell catalysis. In brief, the present study demonstrated that the reaction temperature, pH, and stability of L-AI-C6 from L. fermentum C6 meet the demands of industrial application, and the constructed B. subtilis WB600-pMA5-LAI shows promising potential for the whole-cell biotransformation of D-tagatose.

Development and Characterization of a Tunable Metal-Organic Framework (MOF) for the Synthesis of a Rare Sugar D-Tagatose.

D-tagatose is a valuable rare sugar with potential health benefits such as antiobesity, low-calorie, prebiotic, and anticancer. However, its production is mainly depending on chemical or enzymatic catalysis. Herein, a cobalt-based metal-organic framework (MOF) was developed at room temperature in an aqueous system using a self-assembly method. The L-arabinose isomerase (L-AI) was immobilized into this unique MOF by an in situ encapsulation process. The morphology and structural aspects of the MOF preparations were characterized by different analytical techniques such as scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), confocal laser scanning microscopy (CLSM), Fourier transform infrared spectroscopy (FT-IR), and X-Ray diffraction (XRD). Moreover, thermogravimetric analysis (TGA) suggested the high thermal stability of the L-AI@MOF. Significantly, the immobilized catalyst exhibited enhanced catalytic efficiency (kcat/Km) of 3.22 mM-1 s-1 and improved turnover number (kcat) of 57.32 s-1. The L-AI@MOF efficiently catalyzes the synthesis of D-tagatose from D-galactose up to the equilibrium level (~ 50%) of isomerization in heterogeneous catalysis. Interestingly, L-AI@MOF was found stable and reusable for more than five cycles without the requirement of additional metal ions during catalysis. Thus, L-AI stabilized in the MOF system demonstrated a higher catalytic activity and potential guidance for the sustainable synthesis of rare sugar D-tagatose.

[Rational design of L-arabinose isomerase from Lactobacillus fermentum and its application in D-tagatose production].

L-arabinose isomerase (L-AI) is the key enzyme that isomerizes D-galactose to D-tagatose. In this study, to improve the activity of L-arabinose isomerase on D-galactose and its conversion rate in biotransformation, an L-arabinose isomerase from Lactobacillus fermentum CGMCC2921 was recombinantly expressed and applied in biotransformation. Moreover, its substrate binding pocket was rationally designed to improve the affinity and catalytic activity on D-galactose. We show that the conversion of D-galactose by variant F279I was increased 1.4 times that of the wild-type enzyme. The Km and kcat values of the double mutant M185A/F279I obtained by superimposed mutation were 530.8 mmol/L and 19.9 s-1, respectively, and the catalytic efficiency was increased 8.2 times that of the wild type. When 400 g/L lactose was used as the substrate, the conversion rate of M185A/F279I reached a high level of 22.8%, which shows great application potential for the enzymatic production of tagatose from lactose.

Robust nano-enzyme conjugates for the sustainable synthesis of a rare sugar D-tagatose.

Aim of present study was to develop biological catalysts of L-arabinose isomerase (L-AI) by immobilizing on four different supports such as multiwalled carbon nanotube (MWCNT), graphene oxide (GOx), Santa Barbara Amorphous (SBA-15) and mobile composite matter (MCM-41). Also, comparative analysis of the developed catalysts was performed to evolve the best in terms of transformation efficiency for D-tagatose production. The developed nano-enzyme conjugates (NECs) were characterized using the high resolution transmission electron microscopy (HR-TEM) and elemental analysis was performed by energy dispersive X-ray spectroscopy (EDS). The functional groups were investigated by Fourier transform infra red spectroscopy. Also, the thermo gravimetric analysis (TGA) was employed to plot a thermal degradation weight loss profile of NECs. The conjugated L-AI with MWCNT and GOx were found to be more promising immobilized catalysts due to their ability to provide more surface area. Conversion of D-Galactose to D-Tagatose at moderate temperature and pH was observed to attain the equilibrium level of transformation (~50%). On the contrary, NECs prepared using SBA-15 and MCM-41 as support matrix were unable to reach the equilibrium level of conversion. Additionally, the developed NECs were suitable for reuse in multiple batch cycles. Thus, promising nanotechnology coupled with biocatalysis made the transformation of D-Galactose into D-tagatose more economically sustainable.

Metal-based micro-composite of L-arabinose isomerase and L-ribose isomerase for the sustainable synthesis of L-ribose and D-talose.

The biocatalysts are broadly explored in the biological transformation processes. The enzyme cascade catalysis involves various catalytic activities in a sequential process to produce the desired product including the formation of reaction intermediates. Enzyme immobilization is a method in which enzymes are confined within a support or matrix either physically or chemically to enhance their relative stability and catalytic activity in the enzyme cascade catalysis. In view of this, L-arabinose isomerase (L-AI) and L-ribose isomerase (L-RI) were immobilized on zeolite based metal framework as a micro-composite construct (DEMC@L-AI+L-RI) using linker, and metal ions. Such immobilization could be of great significance and provide several advantages like mesoporous surface for enzyme adsorption, desirable functionality in the production of products in enzyme cascade reaction, high storage stability and enhanced recyclability. The developed DEMC@L-AI+L-RI was characterized using SEM, FTIR, CLSM and TGA. The immobilization yield was 32% and loading of enzyme was 22% on the surface of micro-composite. The DEMC@L-AI+L-RI showed relatively stable catalytic activity at pH 5-6 and temperature 40 °C. The catalytic efficiency (kcat/Km) of both the enzymes was increased by 1.5-fold after immobilization. With the immobilized biocatalyst, bioconversion of L-arabinose to L-ribose was 22.6% and D-galactose to D-talose was 15.2%. The reusability of developed biocatalyst for more than six cycles was observed for more than 50% yield of the sugars. The conversion of biomass sugars from beetroot and onion waste residues was 20% and 14% to produce ribose and talose, respectively.

Alternative Heterologous Expression of L-Arabinose Isomerase from Enterococcus faecium DBFIQ E36 By Residual Whey Lactose Induction.

This study reports an alternative strategy for the expression of a recombinant L-AI from Enterococcus faecium DBFIQ E36 by auto-induction using glucose and glycerol as carbon sources and residual whey lactose as inducer agent. Commercial lactose and isopropyl ß-D-1-thiogalactopyranoside (IPTG) were also evaluated as inducers for comparison of enzyme expression levels. The enzymatic extracts were purified by affinity chromatography, characterized, and applied in the bioconversion of D-galactose into D-tagatose. L-AI presented a catalytic activity of 1.67 ± 0.14, 1.52 ± 0.01, and 0.7 ± 0.04 U/mL, when expressed using commercial lactose, lactose from whey, and IPTG, respectively. Higher activities could be obtained by changing the protocol of enzyme extraction and, for instance, the enzymatic extract produced with whey presented a catalytic activity of 3.8 U/mL. The specific activity of the enzyme extracts produced using lactose (commercial or residual whey) after enzyme purification was also higher when compared to the enzyme expressed with IPTG. Best results were achieved when enzyme expression was conducted using 4 g/L of residual whey lactose for 11 h. These results proved the efficacy of an alternative and economic protocol for the effective expression of a recombinant L-AI aiming its high-scale production.

Optimization of fermentation conditions for production of l-arabinose isomerase of Lactobacillus plantarum WU14.

As a substitute sweetener for sucrose, d-tagatose is widely used in products, such as health drinks, yogurt, fruit juices, baked goods, confectionery, and pharmaceutical preparations. In the fermentation process of l-AI produced by Lactobacillus plantarum, d-tagatose is produced through biotransformation and this study was based on the fermentation process of Lactobacillus plantarum WU14 producing l-AI to further research the biotransformation and separation process of d-tagatose. The kinetics of cell growth, substrate consumption, and l-arabinose isomerase formation were established by nonlinear fitting, and the fitting degrees were 0.996, 0.994, and 0.991, respectively, which could better reflect the change rule of d-tagatose biotransformation in the fermentation process of L. plantarum WU14. The separation process of d-tagatose was identified by decolorization, protein removal, desalination, and freeze drying, initially. Finally, the volume ratio of whole cell catalysts, d-galactose, and borate was 5:1:2 at 60°C, pH 7.17 through borate complexation; then, after 24 hr of conversion, the yield of d-tagatose was 58 g/L.

Rational design of Shewanella sp. l-arabinose isomerase for d-galactose isomerase activity under mesophilic conditions.

d-Tagatose, a potential low calorific substitute for sucrose, can be produced by bioconversion of d-galactose catalysed by l-arabinose isomerase. l-Arabinose isomerase from Shewanella sp. ANA-3 is unique for its ability to catalyse bioconversion reactions under mesophilic conditions. However, d-galactose not being a natural substrate for l-arabinose isomerase is catalysed at a slower rate. We attempted to increase the biocatalytic efficiency of Shewanella sp. l-arabinose isomerase by rational design to enhance galactose isomerisation activity. In silico molecular docking, analysis has revealed that F279 is sterically hindering the binding of d-galactose at the C6 position. Substitution of bulky Phe residue with smaller hydrophilic residues such as Asn and Thr increased the galactose isomerase activity by 86 % and 12 % respectively. At mesophilic conditions, F279N mutant catalysed the bioconversion of d-galactose more efficiently than l-arabinose, indicating a shift in substrate preference.

Advances in engineered Bacillus subtilis biofilms and spores, and their applications in bioremediation, biocatalysis, and biomaterials.

Bacillus subtilis is a commonly used commercial specie with broad applications in the fields of bioengineering and biotechnology. B. subtilis is capable of producing both biofilms and spores. Biofilms are matrix-encased multicellular communities that comprise various components including exopolysaccharides, proteins, extracellular DNA, and poly-γ-glutamic acid. These biofilms resist environmental conditions such as oxidative stress and hence have applications in bioremediation technologies. Furthermore, biofilms and spores can be engineered through biotechnological techniques for environmentally-friendly and safe production of bio-products such as enzymes. The ability to withstand with harsh conditions and producing spores makes Bacillus a suitable candidate for surface display technology. In recent years, the spores of such specie are widely used as it is generally regarded as safe to use. Advances in synthetic biology have enabled the reprogramming of biofilms to improve their functions and enhance the production of value-added products. Globally, there is increased interest in the production of engineered biosensors, biocatalysts, and biomaterials. The elastic modulus and gel properties of B. subtilis biofilms have been utilized to develop living materials. This review outlines the formation of B. subtilis biofilms and spores. Biotechnological engineering processes and their increasing application in bioremediation and biocatalysis, as well as the future directions of B. subtilis biofilm engineering, are discussed. Furthermore, the ability of B. subtilis biofilms and spores to fabricate functional living materials with self-regenerating, self-regulating and environmentally responsive characteristics has been summarized. This review aims to resume advances in biological engineering of B. subtilis biofilms and spores and their applications.