RESUMO
Environmental chemicals, such as plasticizers, have been linked to increased rates of obesity, according to epidemiological studies. Acetyl triethyl citrate (ATEC) is a plasticizer that is commonly utilized in pharmaceutical products and food packaging as a non-phthalate alternative. Due to its direct contact with the human body and high leakage rate from the polymers, assessment of the potential risk of ATEC exposure at environmentally relevant low doses to human health is needed. Male C57BL/6 J mice were fed diets containing ATEC at doses of either 0.1 or 10 µg/kg per day in a period of 12 weeks to mimic the real exposure environment. The findings suggest that in C57BL/6 J mice, ATEC exposure resulted in increased body weight gain, body fat percentage, and benign hepatocytes, as well as adipocyte size. Consistent with in vivo models, ATEC treatment obviously stimulated the increase of intracellular lipid load in both mouse and human hepatocytes. Mechanically, ATEC induced the transcriptional expression of genes involved in de novo lipogenesis and lipid uptake. Using both enzyme inhibitor and small interfering RNA (siRNA) transfection, we found that stearoyl-coenzyme A desaturase 1 (SCD1) played a significant role in ATEC-induced intracellular lipid accumulation. This study for the first time provided initial evidence suggesting the obesogenic and fatty liver-inducing effect of ATEC at low doses near human exposure levels, and ATEC might be a potential environmental obesogen and its effect on human health need to be further evaluated.
Assuntos
Citratos , Lipogênese , Plastificantes , Masculino , Camundongos , Humanos , Animais , Plastificantes/toxicidade , Camundongos Endogâmicos C57BL , Obesidade/induzido quimicamente , Obesidade/metabolismo , Lipídeos , Fígado , Estearoil-CoA Dessaturase/genética , Estearoil-CoA Dessaturase/metabolismoRESUMO
As an alternative plasticizer to conventional phthalates, di(2-ethylhexyl) terephthalate (DEHTP) has attracted considerable concerns, given its widespread detection in the environment and humans. However, the potential toxicity, especially liver toxicity, posed by DEHTP remains unclear. In this study, based on the 2017-2018 National Health and Nutrition Examination Survey, two metabolites of DEHTP, i.e., mono(2-ethyl-5-hydroxyhexyl) terephthalate (MEHHTP) and mono(2-ethyl-5-carboxypentyl) terephthalate (MECPTP), were found to be present in the urine samples of nearly all representative U.S. adults. Moreover, a positive linear correlation was observed between the concentrations of the two metabolites and the risk of nonalcoholic fatty liver disease (NAFLD) in the population. Results of weighted quantile sum and Bayesian kernel machine regression indicated that MEHHTP contributed a greater weight to the risk of NAFLD in comparison with 12 conventional phthalate metabolites. In vitro experiments with hepatocyte HepG2 revealed that MEHHTP exposure could increase lipogenic gene programs, thereby promoting a dose-dependent hepatic lipid accumulation. Activation of liver X receptor α may be an important regulator of MEHHTP-induced hepatic lipid disorders. These findings provide new insights into the liver lipid metabolism toxicity potential of DEHTP exposure in the population.
Assuntos
Hepatopatia Gordurosa não Alcoólica , Ácidos Ftálicos , Hepatopatia Gordurosa não Alcoólica/epidemiologia , Hepatopatia Gordurosa não Alcoólica/metabolismo , Humanos , Ácidos Ftálicos/toxicidade , Ácidos Ftálicos/metabolismo , Masculino , Adulto , FemininoRESUMO
This study investigates the effect of adding oligomers on the rheological properties of polymer nanocomposite melts with the goal of enhancing the processability of nanocomposites. The scaling analysis of plateau modulus (GN ) is used in understanding the complex mechanical behavior of entangled poly(methyl acrylate) (PMA) melts upon oligomer addition. Increasing the oligomer amount led to a decrease in GN and an apparent degree of entanglement (Z) in the neat polymer melt. The particle dispersion states at two particle loadings with oligomer addition are examined in transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS). The dilution exponent is found unchanged at 7 and 17 vol% particle loadings for the well-dispersed PMA-SiO2 nanocomposites compared to the neat PMA solution. These findings suggest that attractive particles with strong interfacial layers do not influence the tube dilution scaling of the polymer with the oligomer. To the contrary, composites with weak polymer-particle interfaces demonstrate phase separation of particles when oligomers are introduced and its exponent for tube dilution scaling reaches 4 at a particle loading of 17 vol%, potentially indicating that network-forming clusters influence chain entanglements in this scenario.
Assuntos
Nanocompostos , Polímeros , Dióxido de Silício , Espalhamento a Baixo Ângulo , Dilatação , Difração de Raios XRESUMO
Bisphenol S (BPS), a BPA analog and a safer alternative, is utilized in a diverse range of industrial applications, such as making polycarbonate plastics, epoxy resins, thermal receipt papers, and currency bills. Recently, the increased use of BPS in containers and packages for daily life has been interrogated due to its identical chemical structure and probable endocrine-disrupting actions as BPA has. The present study aimed to evaluate the alterations in biochemical indices and antioxidant enzymes as certain indicators of the endocrine-disrupting effect of BPS in Channa striatus, a freshwater fish. BPS-exposed fish species were subjected to three sub-lethal concentrations of BPS (1, 4, and 12 ppm) and observed after an interval of 7 and 21 days. Exposure to BPS caused a reduction in the level of protein in muscle, gonads and the liver due to an impairment of protein synthesis. Levels of cholesterol in the muscle, gonads, and liver of BPS-exposed fish were found to be decreased after treatment, indicating either an inhibition of cholesterol biosynthesis in the liver or reduced absorption of dietary cholesterol. The levels of antioxidant enzymes such as superoxide dismutase, catalase, glutathione reductase and glutathione peroxidase showed remarkable increases, while the activity of glutathione S-transferase decreased considerably, indicating the antioxidant defense mechanism to counteract the oxidative stress induced by BPS. Moreover, a significant increase was noted in the level of lipid peroxidation products, like malondialdehyde and conjugate diene, which represent biomarkers of oxidative stress. The histoarchitecture changes were also observed in the liver, muscle and gonads of BPS-treated fish species. The present study showed that sub-lethal exposure to BPS significantly influenced the activities of these enzymes and peroxidation byproducts. From this study, it is concluded that BPS-caused toxic effects in fish species lead to an imbalance in the antioxidant defense system. It is clearly indicated that BPS toxicity could lead to susceptible oxidative stress in various tissues and could damage vital organs.
Assuntos
Antioxidantes , Estresse Oxidativo , Animais , Antioxidantes/farmacologia , Superóxido Dismutase/metabolismo , Colesterol , Mecanismos de Defesa , Peroxidação de Lipídeos , Compostos Benzidrílicos/toxicidadeRESUMO
Growing evidence suggests that exposure to certain metabolism-disrupting chemicals (MDCs), such as the phthalate plasticizer DEHP, might promote obesity in humans, contributing to the spread of this global health problem. Due to the restriction on the use of phthalates, there has been a shift to safer declared substitutes, including the plasticizer diisononyl-cyclohexane-1,2-dicarboxylate (DINCH). Notwithstanding, recent studies suggest that the primary metabolite monoisononyl-cyclohexane-1,2-dicarboxylic acid ester (MINCH), induces differentiation of human adipocytes and affects enzyme levels of key metabolic pathways. Given the lack of methods for assessing metabolism-disrupting effects of chemicals on adipose tissue, we used metabolomics to analyze human SGSB cells exposed to DINCH or MINCH. Concentration analysis of DINCH and MINCH revealed that uptake of MINCH in preadipocytes was associated with increased lipid accumulation during adipogenesis. Although we also observed intracellular uptake for DINCH, the solubility of DINCH in cell culture medium was limited, hampering the analysis of possible effects in the µM concentration range. Metabolomics revealed that MINCH induces lipid accumulation similar to peroxisome proliferator-activated receptor gamma (PPARG)-agonist rosiglitazone through upregulation of the pyruvate cycle, which was recently identified as a key driver of de novo lipogenesis. Analysis of the metabolome in the presence of the PPARG-inhibitor GW9662 indicated that the effect of MINCH on metabolism was mediated at least partly by a PPARG-independent mechanism. However, all effects of MINCH were only observed at high concentrations of 10 µM, which are three orders of magnitudes higher than the current concentrations of plasticizers in human serum. Overall, the assessment of the effects of DINCH and MINCH on SGBS cells by metabolomics revealed no adipogenic potential at physiologically relevant concentrations. This finding aligns with previous in vivo studies and supports the potential of our method as a New Approach Method (NAM) for the assessment of adipogenic effects of environmental chemicals.
Assuntos
Adipócitos , Adipogenia , Ácidos Cicloexanocarboxílicos , Ácidos Dicarboxílicos , Metabolômica , Humanos , Metabolômica/métodos , Ácidos Dicarboxílicos/farmacologia , Ácidos Dicarboxílicos/metabolismo , Adipogenia/efeitos dos fármacos , Adipócitos/efeitos dos fármacos , Adipócitos/metabolismo , Ácidos Cicloexanocarboxílicos/farmacologia , Carbono/metabolismo , Linhagem Celular , Plastificantes/toxicidadeRESUMO
In the United States and abroad, ortho-phthalates and non-ortho-phthalate plasticizers continue to be used within a diverse array of consumer products. Prior California-specific biomonitoring programs for ortho-phthalates have focused on rural, agricultural communities and, to our knowledge, these programs have not measured the potential for exposure to non-ortho-phthalate plasticizers. Therefore, the potential for human exposure to ortho-phthalates and non-ortho-phthalate plasticizers have not been adequately addressed in regions of California that have higher population density. Since there are numerous sources of ortho-phthalates and non-ortho-phthalate plasticizers in population-dense, urban regions, the objective of this study was to leverage silicone wristbands to quantify aggregate ortho-phthalate and non-ortho-phthalate plasticizer exposure over a 5-day period across two different cohorts (2019 and 2020) of undergraduate students at the University of California, Riverside (UCR) that commute from all over Southern California. Based on 5 d of aggregate exposure across two different cohorts, total ortho-phthalate plus non-ortho-phthalate plasticizer concentrations ranged, on average, from â¼100,000-1,000,000 ng/g. Based on the distribution of individual ortho-phthalate and non-ortho-phthalate plasticizer concentrations, the concentrations of di-isononyl phthalate (DiNP, a high molecular weight ortho-phthalate), di (2-ethylhexyl) phthalate (DEHP, a high molecular weight ortho-phthalate), and di-2-ethylhexyl terephthalate (DEHT, a non-ortho-phthalate plasticizer) detected within wristbands were higher than the remaining seven ortho-phthalates and non-ortho-phthalate plasticizers measured, accounting for approximately 94-97% of the total mass depending on the cohort. Overall, our findings raise concerns about chronic DiNP, DEHP, and DEHT exposure in urban, population-dense regions throughout California.
Assuntos
Exposição Ambiental , Ácidos Ftálicos , Plastificantes , Humanos , Plastificantes/análise , California , Ácidos Ftálicos/análise , Exposição Ambiental/análise , Silicones/química , Poluentes Ambientais/análise , Feminino , Masculino , Adulto Jovem , Monitoramento Ambiental/métodos , Punho , AdultoRESUMO
Di(2-ethylhexyl) phthalate (DEHP) is a plasticizer that is used worldwide and raises concerns because of its prevalence in the environment and potential toxicity. Herein, the capability of Fusarium culmorum to degrade a high concentration (3 g/L) of DEHP as the sole carbon and energy source in solid-state fermentation (SSF) was studied. Cultures grown on glucose were used as controls. The biodegradation of DEHP by F. culmorum reached 96.9% within 312 h. This fungus produced a 3-fold higher esterase activity in DEHP-supplemented cultures than in control cultures (1288.9 and 443.2 U/L, respectively). In DEHP-supplemented cultures, nine bands with esterase activity (24.6, 31.2, 34.2, 39.5, 42.8, 62.1, 74.5, 134.5, and 214.5 kDa) were observed by zymography, which were different from those in control cultures and from those previously reported for cultures grown in submerged fermentation. This is the first study to report the DEHP biodegradation pathway by a microorganism grown in SSF. The study findings uncovered a novel biodegradation strategy by which high concentrations of DEHP could be biodegraded using two alternative pathways simultaneously. F. culmorum has an outstanding capability to efficiently degrade DEHP by inducing esterase production, representing an ecologically promising alternative for the development of environmental biotechnologies, which might help mitigate the negative impacts of environmental contamination by this phthalate. KEY POINTS: ⢠F. culmorum has potential to tolerate and remove di(2-ethylhexyl) phthalate (DEHP) ⢠Solid-state fermentation is an efficient system for DEHP degradation by F. culmorum ⢠High concentrations of DEHP induce high levels of esterase production by F. culmorum.
Assuntos
Dietilexilftalato , Fusarium , Ácidos Ftálicos , Dietilexilftalato/metabolismo , Biodegradação Ambiental , Esterases/metabolismoRESUMO
Plasticizers are necessary for the usability of various products, including food contact materials. Exposure to plasticizers is most commonly made through the oral route. Several plasticizers have been reported to have adverse effects on humans and the environment. Thus, the present study aimed to determine the long-term toxicity and carcinogenicity of a novel plasticizer called bis(2-ethylhexyl) cyclohexane-1,4-dicarboxylate (Eco-DEHCH), which is an ecofriendly and biologically less harmful replacer. Groups of 50 male and 50 female Han Wistar rats were fed Eco-DEHCH at daily doses of 1,600, 5,000, or 16,000 ppm in their diet for at least 104 weeks. The rats were regularly monitored for mortality, clinical signs, body weight, food consumption, food efficiency, and perceivable mass. All animals were subjected to complete necropsy and histopathological examination. The results indicate that the rats well tolerated chronic exposure to Eco-DEHCH at highest daily doses of 16,000 ppm, with was equivalent to 805.1 mg/kg/day in males and 1060.6 mg/kg/day in females and did not show signs of toxicity or carcinogenicity. In conclusion, Eco-DEHCH could be a safe and promising alternative plasticizer.
Assuntos
Testes de Carcinogenicidade , Plastificantes , Ratos Wistar , Animais , Plastificantes/toxicidade , Masculino , Feminino , Ratos , Administração Oral , Ácidos Dicarboxílicos/toxicidade , Ácidos Dicarboxílicos/administração & dosagem , Relação Dose-Resposta a Droga , Cicloexanos/toxicidade , Cicloexanos/administração & dosagem , DietaRESUMO
Introduction: Di(2-ethylhexyl) phthalate (DEHP) is a plasticizer commonly used in blood bags. Despite its protective effects on red blood cell (RBC) storage, concerns about its reproductive toxicity exist. This study investigated the in vitro quality of RBC concentrates stored in bags using di(isononyl) cyclohexane-1,2-dicarboxylate (DINCH) as an alternative plasticizer. Methods: Using a pool-and-split study design, we produced 20 matched homogenous quintets of RBC concentrates in two DINCH bags and three DEHP bags with citrate phosphate dextrose adenine (CPDA-1) anticoagulant. RBC storage quality was assessed weekly for 35 days. Results: On day 35, the median hemolysis levels in the DINCH bags (0.297-0.342%) were marginally higher (p < 0.05) than the DEHP bags (0.204-0.240%). All DINCH bags showed <0.8% hemolysis. RBCs in the DINCH bags showed increased mean corpuscular volume and decreased eosin 5' maleimide binding than in the DEHP bags. Higher pO2 and lower pCO2 levels in the DINCH bags indicated better gas permeability than in DEHP bags. Other metabolic parameters were comparable in both bags. Compared to DEHP, DINCH exhibited considerably lower levels of plasticizer leaching into blood bags. Conclusion: The quality of RBC concentrates stored for 35 days in DINCH-plasticized blood bags with CDPA-1 is generally comparable to those in DEHP bags. Hence, DINCH can be a viable alternative to DEHP in blood bags for nonleukoreduced RBC storage even without the use of next-generation additive solutions to improve RBC preservation quality.
A plasticizer is a chemical substance added to plastic to increase its flexibility. DEHP is a plasticizer that has been widely used in many products including plastic tubing and bags of medical devices. However, concerns about DEHP-related toxicity have been debated for many years. DEHP has been replaced with other plasticizers in many products, but it is still being used in blood bags due to its protective effect on RBC preservation. DINCH is an alternative plasticizer with a low toxicology profile. This study investigated the quality of RBC concentrates stored in blood bags using DINCH. Twenty sets of five RBC concentrates were produced using two DINCH bags and three DEHP bags with CPDA-1 anticoagulant, and the storage quality was assessed weekly for 35 days. On day 35, the median hemolysis levels in the DINCH bags (0.2970.342%) were slightly increased than the DEHP bags (0.2040.240%). However, all DINCH bags showed hemolysis lower than the regulatory limit of 0.8%. DINCH bags exhibited better gas permeability than DEHP bags. Compared to DEHP, DINCH exhibited considerably lower levels of plasticizer leaching into blood bags. Most of the other metabolic parameters were comparable in both bags. The quality of nonleukocyte-reduced RBC concentrates stored for 35 days in DINCH-plasticized blood bags with CDPA-1 is generally comparable to those in DEHP bags. Hence, DINCH can be a viable alternative to DEHP in blood bags for RBC storage, even without the use of next-generation additive solutions to improve RBC preservation quality.
RESUMO
Measures to endorse the adoption of eco-friendly biodegradable plastics as a response to the scale of plastic pollution has created a demand for innovative products from materials from Nature. Ionic liquids (ILs) have the ability to disrupt the hydrogen bonding network of biopolymers, increase the mobility of biopolymer chains, reduce friction, and produce materials with various morphologies and mechanical properties. Due to these qualities, ILs are considered ideal for plasticizing biopolymers, enabling them to meet a wide range of specifications for biopolymeric materials. This mini-review discusses the effect of different IL-plasticizers on the processing, tensile strength, and elasticity of materials made from various biopolymers (e.g., starch, chitosan, alginate, cellulose), and specifically covers IL-plasticized packaging materials and materials for biomedical and electrochemical applications. Furthermore, challenges (cost, scale, and eco-friendliness) and future research directions in IL-based plasticizers for biopolymers are discussed.
Assuntos
Quitosana , Líquidos Iônicos , Líquidos Iônicos/química , Plastificantes/química , Celulose/química , Biopolímeros , Quitosana/químicaRESUMO
State-of-the-art Li batteries suffer from serious safety hazards caused by the reactivity of lithium and the flammable nature of liquid electrolytes. This work develops highly efficient solid-state electrolytes consisting of imidazolium-containing polyionic liquids (PILs) and lithium bis(trifluoromethane sulfonyl)imide (LiTFSI). By employing PIL/LiTFSI electrolyte membranes blended with poly(propylene carbonate) (PPC), we addressed the problem of combining ionic conductivity and mechanical properties in one material. It was found that PPC acts as a mechanically reinforcing component that does not reduce but even enhances the ionic conductivity. While pure PILs are liquids, the tricomponent PPC/PIL/LiTFSI blends are rubber-like materials with a Young's modulus in the range of 100 MPa. The high mechanical strength of the material enables fabrication of mechanically robust free-standing membranes. The tricomponent PPC/PIL/LiTFSI membranes have an ionic conductivity of 10-6 S·cm-1 at room temperature, exhibiting conductivity that is two orders of magnitude greater than bicomponent PPC/LiTFSI membranes. At 60 °C, the conductivity of PPC/PIL/LiTFSI membranes increases to 10-5 S·cm-1 and further increases to 10-3 S·cm-1 in the presence of plasticizers. Cyclic voltammetry measurements reveal good electrochemical stability of the tricomponent PIL/PPC/LiTFSI membrane that potentially ranges from 0 to 4.5 V vs. Li/Li+. The mechanically reinforced membranes developed in this work are promising electrolytes for potential applications in solid-state batteries.
Assuntos
Líquidos Iônicos , Propano/análogos & derivados , Lítio , Eletrólitos , Íons , Poli A , PolímerosRESUMO
The proliferation of emerging pollutants (EPs), encompassing a range of substances such as phthalates, phenolics, pharmaceuticals, pesticides, personal care products, surfactants, and disinfection agents, has become a significant global concern due to their potential risks to the environment and human well-being. Over the past two decades, numerous research studies have investigated the presence of EPs in wastewater and aquatic ecosystems, with the United States Environmental Protection Agency (USEPA) categorizing these newly introduced chemical compounds as emerging contaminants due to their poorly understood impact. EPs have been linked to adverse health effects in humans, including genotoxic and cytotoxic effects, as well as conditions such as obesity, diabetes, cardiovascular disease, and reproductive abnormalities, often associated with their estrogenic action. Microalgae have shown promise in the detoxification of both inorganic and organic contaminants, and several large-scale microalgal systems for wastewater treatment have been developed. However, the progress of algal bioremediation can be influenced by accidental contaminations and operational challenges encountered in pilot-scale research. Microalgae employ various processes, such as bioadsorption, biouptake, and biodegradation, to effectively remediate EPs. During microalgal biodegradation, complex chemical compounds are transformed into simpler substances through catalytic metabolic degradation. Integrating algal bioremediation with existing treatment methodologies offers a viable approach for efficiently eliminating EPs from wastewater. This review focuses on the use of algal-based biological remediation processes for wastewater treatment, the environmental impacts of EPs, and the challenges associated with implementing algal bioremediation systems to effectively remove emerging pollutants.
Assuntos
Poluentes Ambientais , Microalgas , Poluentes Químicos da Água , Humanos , Poluentes Ambientais/metabolismo , Águas Residuárias , Ecossistema , Água/metabolismo , Poluentes Químicos da Água/química , Biodegradação Ambiental , Microalgas/metabolismoRESUMO
The use of vegetable oil-dervied plasticizers to enhance the flexibility of polylactic acid (PLA) has received much attention due to their renewability, inexpensiveness and biodegradation. However, the double bonds in vegetable oil-based plasticizers limit their compatibility with PLA, resulting in PLA-derived products with reduced flexibility. Herein, we examined soybean oil-derived hydrogenated dimer acid-based polyethylene glycol methyl ether esters (HDA-2n, 2n = 2, 4, 6 or 8, referring to the ethoxy units) developed via the direct esterification of saturated hydrogenated dimer acid and polyethylene glycol monomethyl ethers. The resulting HDA-2n was first used as a plasticizer for PLA, and the effects of the ethoxy units in HDA-2n on the overall performance of the plasticized PLA were systematically investigated. The results showed that, compared with PLA blended with dioctyl terephthalate (DOTP), the PLA plasticized by HDA-8 with the maximum number of ethoxy units (PLA/HDA-8) exhibited better low-temperature resistance (40.1 °C vs. 15.3 °C), thermal stability (246.8 °C vs. 327.6 °C) and gas barrier properties. Additionally, the biodegradation results showed that HDA-8 could be biodegraded by directly burying it in soil. All results suggest that HDA-8 could be used as green alternative to the traditional petroleum-based plasticizer DOTP, which is applied in the PLA industry.
RESUMO
Nowadays, finding natural and inexpensive resources that can be easily used to make food films has been considered. Despite the widespread use of synthetic resins, natural resins are rarely used. Opopanax resin (OR) was used in this study as a new biosource to prepare the hydrophobic edible film. Ethylcellulose (EC) was blended well with the resin, allowing the formation of a composite film. Film preparation was possible using different amounts of OR and EC. It was interesting that OR had a plasticizing effect on EC film. While using up to 33% w/w glycerol could not produce an elastic EC film, using only 8.5% w/w OR produced a stiff and flexible EC film with lower water sensitivity. Fourier transform infrared (FTIR) spectroscopy analysis showed that the strength of C-O-C and CH bonds in OR + EC film was higher than in EC film. Despite the higher water sensitivity of OR-based composite films than EC-based composite films, they had lower water vapor permeability (WVP) and higher contact angle due to their smoother and more homogeneous film structures with lower porosity, confirmed by scanning electron microscopy (SEM) images. The mechanical properties showed that the film with the highest resin content had the lowest tensile strength (~ 0.4 MPa) and the higher elongation at break (~ 67%) and, therefore, the highest flexibility. The use of natural resins as a biosource is a promising approach in food packaging to prepare hydrophobic films with desirable mechanical properties.
RESUMO
The plant pigments called betalains are nutritionally safe polar compounds. They are subdivided into betaxanthins (having orange to yellow hues) and betacyanins (purple to red violet hues). Betacyanins change color with a change in pH, particularly in the range 6-8 and 9-11. Perishable foods like fish, chicken, beef, pork, and others tend to release total volatile base-nitrogen (TVB-N) during storage or deterioration, which leads to a change in the pH of pH-sensitive materials in the vicinity. pH-sensitive pigment-incorporated polymeric films with inherent active properties (or active/intelligent films) are increasingly being studied as an alternative to synthetic pH indicators to detect the accumulation of TVB-N by changing its color to indicate the stage of perishable food spoilage. There are many methods of developing such films under different conditions using different bio-based biodegradable polymer(s) and biocompatible plasticizer combinations. Among the reported methods, solution casting method has been the preferred one in most studies covered in this review. This method can be carried out under mild conditions. As such, betacyanins-incorporated polymeric films essentially require mild processing conditions because of their heat sensitivity, which will invariably affect the performance in food freshness monitoring. In this review, film fabrication parameters like temperature and duration of dissolution of polymers, plasticizer concentration, pH of the film-forming solution, film drying, and conditioning/aging, have been critically appraised based on the available literature. The lack of studies on the safety of active/intelligent films has been systematically highlighted in this review to focus future studies on this area.
RESUMO
BACKGROUND AND OBJECTIVES: Polyvinyl chloride (PVC) plasticized with di(2-ethylhexyl) phthalate (DEHP) is a widely used material for medical transfusion devices. Not covalently bound to PVC, DEHP can migrate into blood products during storage. Recognized as an endocrine disruptor and raising concerns about its potential carcinogenicity and reprotoxicity, DEHP is gradually being withdrawn from the medical device market. Therefore, the use of alternative plasticizers, such as diisononylcyclohexane-1,2-dicarboxylate (DINCH) and di(2-ethylhexyl) terephthalate (DEHT), as potential candidates for the replacement of DEHP in medical transfusion devices has been investigated. The purpose of this study was to evaluate the quantity of PVC-plasticizers in the blood components according to their preparation, storage conditions and in function of the plasticizer. MATERIALS AND METHODS: Whole blood was collected, and labile blood products (LBPs) were prepared by the buffy-coat method with a PVC blood bag plasticized either with DEHP, DINCH or DEHT. DINCH and DEHT equivalent concentrations were quantified in LBPs by liquid chromatography-tandem mass spectrometry or coupled with UV and compared to DEHP equivalent concentrations. RESULTS: The plasticizer equivalent concentration to which a patient is exposed during a transfusion depends on the preparation of LBPs as well as their storage conditions, that is, temperature and storage time. At day 1, for all LBPs, the migration of DEHP is 5.0 and 8.5 times greater than DINCH and DEHT, respectively. At the end of the 49 days storage period, the DEHP equivalent concentration in red blood cells concentrate is statistically higher when compared to DINCH and DEHT, with maximal values of 1.85, 1.13 and 0.86 µg/dm2 /mL, respectively. CONCLUSION: In addition to lower toxicity, transfused patients using PVC-DEHT or PVC-DINCH blood bags are less exposed to plasticizers than using PVC-DEHP bags with a ranging exposure reduction from 38.9% to 87.3%, due to lower leachability into blood components.
Assuntos
Preservação de Sangue , Ácidos Cicloexanocarboxílicos , Dietilexilftalato , Ácidos Ftálicos , Plastificantes , Humanos , Dietilexilftalato/análise , Plastificantes/análise , Cloreto de Polivinila/química , Preservação de Sangue/instrumentação , Preservação de Sangue/normas , Segurança do Sangue , Transfusão de Sangue/instrumentação , Transfusão de Sangue/normas , Ácidos Cicloexanocarboxílicos/análise , Cromatografia Líquida de Alta PressãoRESUMO
BACKGROUND: Di(2-ethylhexyl) phthalate (DEHP) is a widely detected plasticizer and a priority pollutant of utmost concern for its adverse impact on humans, wildlife and the environment. To eliminate such toxic burden, biological processes are the most promising ways to combat rampant environmental insults under eco-friendly conditions. The present study investigated the biochemical and molecular assessment of the catabolic potential of Mycolicibacterium sp. strain MBM in the assimilation of estrogenic DEHP. RESULTS: A detailed biochemical study revealed an initial hydrolytic pathway of degradation for DEHP followed by the assimilation of hydrolyzed phthalic acid and 2-ethylhexanol to TCA cycle intermediates. Besides the inducible nature of DEHP-catabolic enzymes, strain MBM can efficiently utilize various low- and high-molecular-weight phthalate diesters and can grow under moderately halotolerant conditions. Whole genome sequence analysis exhibited a genome size of 6.2 Mb with a GC content of 66.51% containing 6,878 coding sequences, including multiple genes, annotated as relevant to the catabolism of phthalic acid esters (PAEs). Substantiating the annotated genes through transcriptome assessment followed by RT-qPCR analysis, the possible roles of upregulated genes/gene clusters in the metabolism of DEHP were revealed, reinforcing the biochemical pathway of degradation at the molecular level. CONCLUSIONS: A detailed co-relation of biochemical, genomic, transcriptomic and RT-qPCR analyses highlights the PAE-degrading catabolic machineries in strain MBM. Further, due to functional attributes in the salinity range of both freshwater and seawater, strain MBM may find use as a suitable candidate in the bioremediation of PAEs.
Assuntos
Dietilexilftalato , Mycobacteriaceae , Ácidos Ftálicos , Humanos , Dietilexilftalato/análise , Dietilexilftalato/metabolismo , Ácidos Ftálicos/metabolismo , Biodegradação Ambiental , Mycobacteriaceae/metabolismo , Ésteres/metabolismoRESUMO
PURPOSE: Plasticizers are commonly used in the preparation of amorphous solid dispersions (ASDs) with the main goal of aiding processability; however, to the best of our knowledge, the impact of plasticizers on drug release has not been explored. The goal of this study was to evaluate diverse plasticizers, including glycerol and citrate derivatives, as additives to increase the drug loading where good drug release could be achieved from copovidone (PVPVA)-based dispersions, focusing on high glass transition (Tg) drugs, atazanavir (ATZ) and ledipasvir (LED). METHODS: ASDs were prepared using the high Tg compounds, atazanavir (ATZ) and ledipasvir (LED), as model drugs. Release was evaluated using surface normalized dissolution testing. Differential scanning calorimetry was used to measure glass transition temperature and water vapor sorption was performed on select samples. RESULTS: The presence of a plasticizer at 5% w/w for ATZ and 10% w/w for LED ASDs, led to improved drug release. For ATZ ASDs, in the absence of plasticizer, release was very poor at drug loadings of 10% w/w and above. Good release was obtained for plasticized ASDs up to a drug loading of 25%. The corresponding improvement for LED was from 5 to 20% DL. Interestingly, for a low Tg compound, ritonavir, relatively smaller improvements in release as a function of drug loading were achieved through plasticizer incorporation. CONCLUSIONS: The use of plasticizers represents a potential new strategy to increase drug loading in ASDs for high Tg compounds with a low tendency to crystallize and may help improve a major limitation of ASD formulations, namely the high excipient burden.
Assuntos
Benzimidazóis , Plastificantes , Plastificantes/química , Solubilidade , Sulfato de Atazanavir , Liberação Controlada de Fármacos , Composição de MedicamentosRESUMO
Globally, more than 6 million metric tons of agricultural plastic films are used to increase crop yields and reduce the use of water and herbicides, resulting in the contamination of soil and water by plastic debris and additives. However, knowledge of the occurrence and release of additives from agricultural films is limited. In this study, suspect screening with high-resolution mass spectrometry, one-dimensional Fickian diffusion models, and linear free energy relationships (LFERs) were used to determine the occurrence and mass transfer of various additives from agricultural plastic films. A total of 89 additives were tentatively identified in 40 films, and 62 of them were further validated and quantified. The aqueous concentrations of 26 released additives reached mg L-1 after a 28 day incubation at 25 °C. Diffusion models and LFERs demonstrated that the film-water partition coefficient and the diffusivity in the polymer, the two critical parameters controlling the mass transfer, could be predicted using Abraham descriptors. The findings of this study highlighted the need for future research on the environmental fate and risk assessment of previously neglected additives in agricultural plastic films and other similar products.
Assuntos
Plásticos , Água , Plásticos/análise , Agricultura , Polímeros , SoloRESUMO
Chlorinated paraffins (CPs) are widely produced chemicals, with certain CP subgroups facing global restrictions due to their environmental dispersion, persistence, bioaccumulation, and toxicity. To evaluate the effectiveness of these international restrictions, we assessed the homologue group contribution and the mass fraction of short-chain CPs (SCCPs: C10-C13), medium-chain CPs (MCCPs: C14-C17), and long-chain CPs (LCCPs: ≥C18) in 36 technical CP mixtures used worldwide over the last 50 years. Using low-resolution mass spectrometry (LC-ESI-MS/MS), we quantified 74 CP homologue groups (C10Cl4-C20Cl10). Additionally, high-resolution mass spectrometry (LC-ESI-QTOF-MS) screening was employed to identify unresolved CP contents, covering 375 CP homologue groups (C6Cl4-C30Cl30). Overall, 1 sample was mainly composed of Assuntos
Parafina
, Espectrometria de Massas em Tandem
, Cromatografia Líquida