Synthesis of meta-substituted arene bioisosteres from [3.1.1]propellane.

Small-ring cage hydrocarbons are popular bioisosteres (molecular replacements) for commonly found para-substituted benzene rings in drug design1. The utility of these cage structures derives from their superior pharmacokinetic properties compared with their parent aromatics, including improved solubility and reduced susceptibility to metabolism2,3. A prime example is the bicyclo[1.1.1]pentane motif, which is mainly synthesized by ring-opening of the interbridgehead bond of the strained hydrocarbon [1.1.1]propellane with radicals or anions4. By contrast, scaffolds mimicking meta-substituted arenes are lacking because of the challenge of synthesizing saturated isosteres that accurately reproduce substituent vectors5. Here we show that bicyclo[3.1.1]heptanes (BCHeps), which are hydrocarbons for which the bridgehead substituents map precisely onto the geometry of meta-substituted benzenes, can be conveniently accessed from [3.1.1]propellane. We found that [3.1.1]propellane can be synthesized on a multigram scale, and readily undergoes a range of radical-based transformations to generate medicinally relevant carbon- and heteroatom-substituted BCHeps, including pharmaceutical analogues. Comparison of the absorption, distribution, metabolism and excretion (ADME) properties of these analogues reveals enhanced metabolic stability relative to their parent arene-containing drugs, validating the potential of this meta-arene analogue as an sp3-rich motif in drug design. Collectively, our results show that BCHeps can be prepared on useful scales using a variety of methods, offering a new surrogate for meta-substituted benzene rings for implementation in drug discovery programmes.

Preparation of cyclohexene isotopologues and stereoisotopomers from benzene.

The hydrogen isotopes deuterium (D) and tritium (T) have become essential tools in chemistry, biology and medicine1. Beyond their widespread use in spectroscopy, mass spectrometry and mechanistic and pharmacokinetic studies, there has been considerable interest in incorporating deuterium into drug molecules1. Deutetrabenazine, a deuterated drug that is promising for the treatment of Huntington's disease2, was recently approved by the United States' Food and Drug Administration. The deuterium kinetic isotope effect, which compares the rate of a chemical reaction for a compound with that for its deuterated counterpart, can be substantial1,3,4. The strategic replacement of hydrogen with deuterium can affect both the rate of metabolism and the distribution of metabolites for a compound5, improving the efficacy and safety of a drug. The pharmacokinetics of a deuterated compound depends on the location(s) of deuterium. Although methods are available for deuterium incorporation at both early and late stages of the synthesis of a drug6,7, these processes are often unselective and the stereoisotopic purity can be difficult to measure7,8. Here we describe the preparation of stereoselectively deuterated building blocks for pharmaceutical research. As a proof of concept, we demonstrate a four-step conversion of benzene to cyclohexene with varying degrees of deuterium incorporation, via binding to a tungsten complex. Using different combinations of deuterated and proteated acid and hydride reagents, the deuterated positions on the cyclohexene ring can be controlled precisely. In total, 52 unique stereoisotopomers of cyclohexene are available, in the form of ten different isotopologues. This concept can be extended to prepare discrete stereoisotopomers of functionalized cyclohexenes. Such systematic methods for the preparation of pharmacologically active compounds as discrete stereoisotopomers could improve the pharmacological and toxicological properties of drugs and provide mechanistic information related to their distribution and metabolism in the body.

Occupational Benzene Exposure and Lung Cancer Risk: A Pooled Analysis of 14 Case-Control Studies.

Rationale: Benzene has been classified as carcinogenic to humans, but there is limited evidence linking benzene exposure to lung cancer. Objectives: We aimed to examine the relationship between occupational benzene exposure and lung cancer. Methods: Subjects from 14 case-control studies across Europe and Canada were pooled. We used a quantitative job-exposure matrix to estimate benzene exposure. Logistic regression models assessed lung cancer risk across different exposure indices. We adjusted for smoking and five main occupational lung carcinogens and stratified analyses by smoking status and lung cancer subtypes. Measurements and Main Results: Analyses included 28,048 subjects (12,329 cases, 15,719 control subjects). Lung cancer odds ratios ranged from 1.12 (95% confidence interval, 1.03-1.22) to 1.32 (95% confidence interval, 1.18-1.48) (Ptrend = 0.002) for groups with the lowest and highest cumulative occupational exposures, respectively, compared with unexposed subjects. We observed an increasing trend of lung cancer with longer duration of exposure (Ptrend < 0.001) and a decreasing trend with longer time since last exposure (Ptrend = 0.02). These effects were seen for all lung cancer subtypes, regardless of smoking status, and were not influenced by specific occupational groups, exposures, or studies. Conclusions: We found consistent and robust associations between different dimensions of occupational benzene exposure and lung cancer after adjusting for smoking and main occupational lung carcinogens. These associations were observed across different subgroups, including nonsmokers. Our findings support the hypothesis that occupational benzene exposure increases the risk of developing lung cancer. Consequently, there is a need to revisit published epidemiological and molecular data on the pulmonary carcinogenicity of benzene.

Long-Term Exposure to Low Concentrations of Ambient Benzene and Mortality in a National English Cohort.

Background: Benzene affects human health through environmental exposure in addition to occupational contact. However, few studies have examined the associations between long-term exposure to low concentrations of ambient benzene and mortality risks in nonoccupational settings.Methods: This prospective cohort study consists of 393,042 participants without stroke, myocardial infarction, or cancer at baseline from the UK Biobank. Annual average concentrations of benzene for each year during follow-up were measured using air dispersion models. The main outcomes were all-cause mortality and mortality from specific causes. Cox proportional-hazards models with time-varying exposure measurements were used to estimate the hazard ratios and 95% confidence intervals (CIs) for mortality risks. Restricted cubic spline models were used to estimate exposure-response relationships.Measurements and Main Results: With each interquartile range increase in the average annual concentration of benzene, the adjusted hazard ratios of mortality risk from all causes, cardiovascular disease, cancer, and respiratory disease were 1.26 (95% CI, 1.24-1.27), 1.24 (95% CI, 1.21-1.28), 1.27 (95% CI, 1.25-1.29), and 1.25 (95% CI, 1.20-1.30), respectively. The monotonically increasing exposure-response curves showed no threshold and plateau within the observed concentration range. Furthermore, the effect of benzene exposure on mortality persisted across different subgroups and was somewhat stronger in younger and White people (P for interaction < 0.05).Conclusions: Long-term exposure to low concentrations of ambient benzene significantly increases mortality risk in the general population. Ambient benzene represents a potential threat to public health, and further investigations are needed to support timely pollution regulation and health protection.

Targeting protein-protein interaction interfaces with antiviral N protein inhibitor in SARS-CoV-2.

Coronaviruses not only pose significant global public health threats but also cause extensive damage to livestock-based industries. Previous studies have shown that 5-benzyloxygramine (P3) targets the Middle East respiratory syndrome coronavirus (MERS-CoV) nucleocapsid (N) protein N-terminal domain (N-NTD), inducing non-native protein-protein interactions (PPIs) that impair N protein function. Moreover, P3 exhibits broad-spectrum antiviral activity against CoVs. The sequence similarity of N proteins is relatively low among CoVs, further exhibiting notable variations in the hydrophobic residue responsible for non-native PPIs in the N-NTD. Therefore, to ascertain the mechanism by which P3 demonstrates broad-spectrum anti-CoV activity, we determined the crystal structure of the SARS-CoV-2 N-NTD:P3 complex. We found that P3 was positioned in the dimeric N-NTD via hydrophobic contacts. Compared with the interfaces in MERS-CoV N-NTD, P3 had a reversed orientation in SARS-CoV-2 N-NTD. The Phe residue in the MERS-CoV N-NTD:P3 complex stabilized both P3 moieties. However, in the SARS-CoV-2 N-NTD:P3 complex, the Ile residue formed only one interaction with the P3 benzene ring. Moreover, the pocket in the SARS-CoV-2 N-NTD:P3 complex was more hydrophobic, favoring the insertion of the P3 benzene ring into the complex. Nevertheless, hydrophobic interactions remained the primary stabilizing force in both complexes. These findings suggested that despite the differences in the sequence, P3 can accommodate a hydrophobic pocket in N-NTD to mediate a non-native PPI, enabling its effectiveness against various CoVs.

Biological Evaluation of Isosteric Applicability of 1,3-Substituted Cuneanes as m-Substituted Benzenes Enabled by Selective Isomerization of 1,4-Substituted Cubanes.

We herein evaluate a biological applicability of 1,3-substituted cuneanes as an isostere of m-substituted benzenes based on its structural similarity. An investigation of a method to obtain 1,3-substituted cuneanes by selective isomerization of 1,4-substituted cubanes enables this attempt by giving a key synthetic step to obtain a cuneane analogs of pharmaceuticals having m-substituted benzene moiety. Biological evaluation of the synthesized analogs and in silico study of the obtained result revealed a potential usage of cuneane skeleton in medicinal chemistry.

Enhancement of Benzene Emissions in Special Combinations of Electronic Nicotine Delivery System Liquid Mixtures.

Electronic nicotine delivery systems (ENDS) are battery-powered devices introduced to the market as safer alternatives to combustible cigarettes. Upon heating the electronic liquid (e-liquid), aerosols are released, including several toxicants, such as volatile organic compounds (VOCs). Benzene has been given great attention as a major component of the VOCs group as it increases cancer risk upon inhalation. In this study, several basic e-liquids were tested for benzene emissions. The Aerosol Lab Vaping Instrument was used to generate aerosols from ENDS composed of different e-liquid combinations: vegetable glycerin (VG), propylene glycol (PG), nicotine (nic), and benzoic acid (BA). The tested mixtures included PG, PG + nic + BA, VG, VG + nic + BA, 30/70 PG/VG, and 30/70 PG/VG + nic + BA. A carboxen polydimethylsiloxane fiber for a solid-phase microextraction was placed in a gas cell to trap benzene emitted from a Sub-Ohm Minibox C device. Benzene was adsorbed on the fiber during the puffing process and for an extra 15 min until it reached equilibrium, and then it was determined using gas chromatography-mass spectrometry. Benzene was quantified in VG but not in PG or the 30/70 PG/VG mixtures. However, benzene concentration increased in all tested mixtures upon the addition of nicotine benzoate salt. Interestingly, benzene was emitted at the highest concentration when BA was added to PG. However, lower concentrations were found in the 30/70 PG/VG and VG mixtures with BA. Both VG and BA are sources of benzene. Enhanced emissions, however, are mostly noticeable when BA is mixed with PG and not VG.

Interventional probability of causation (IPoC) with epidemiological and partial mechanistic evidence: benzene vs. formaldehyde and acute myeloid leukemia (AML).

INTRODUCTION: Causal epidemiology for regulatory risk analysis seeks to evaluate how removing or reducing exposures would change disease occurrence rates. We define interventional probability of causation (IPoC) as the change in probability of a disease (or other harm) occurring over a lifetime or other specified time interval that would be caused by a specified change in exposure, as predicted by a fully specified causal model. We define the closely related concept of causal assigned share (CAS) as the predicted fraction of disease risk that would be removed or prevented by a specified reduction in exposure, holding other variables fixed. Traditional approaches used to evaluate the preventable risk implications of epidemiological associations, including population attributable fraction (PAF) and the Bradford Hill considerations, cannot reveal whether removing a risk factor would reduce disease incidence. We argue that modern formal causal models coupled with causal artificial intelligence (CAI) and realistically partial and imperfect knowledge of underlying disease mechanisms, show great promise for determining and quantifying IPoC and CAS for exposures and diseases of practical interest. METHODS: We briefly review key CAI concepts and terms and then apply them to define IPoC and CAS. We present steps to quantify IPoC using a fully specified causal Bayesian network (BN) model. Useful bounds for quantitative IPoC and CAS calculations are derived for a two-stage clonal expansion (TSCE) model for carcinogenesis and illustrated by applying them to benzene and formaldehyde based on available epidemiological and partial mechanistic evidence. RESULTS: Causal BN models for benzene and risk of acute myeloid leukemia (AML) incorporating mechanistic, toxicological and epidemiological findings show that prolonged high-intensity exposure to benzene can increase risk of AML (IPoC of up to 7e-5, CAS of up to 54%). By contrast, no causal pathway leading from formaldehyde exposure to increased risk of AML was identified, consistent with much previous mechanistic, toxicological and epidemiological evidence; therefore, the IPoC and CAS for formaldehyde-induced AML are likely to be zero. CONCLUSION: We conclude that the IPoC approach can differentiate between likely and unlikely causal factors and can provide useful upper bounds for IPoC and CAS for some exposures and diseases of practical importance. For causal factors, IPoC can help to estimate the quantitative impacts on health risks of reducing exposures, even in situations where mechanistic evidence is realistically incomplete and individual-level exposure-response parameters are uncertain. This illustrates the strength that can be gained for causal inference by using causal models to generate testable hypotheses and then obtaining toxicological data to test the hypotheses implied by the models-and, where necessary, refine the models. This virtuous cycle provides additional insight into causal determinations that may not be available from weight-of-evidence considerations alone.

General Synthesis of Conformationally Constrained Noncanonical Amino Acids with C(sp3)-Rich Benzene Bioisosteres.

Recent years have seen novel modalities emerge for the treatment of human diseases resulting in an increase in beyond rule of 5 (bRo5) chemical matter. As a result, synthetic innovations aiming to enable rapid access to complex bRo5 molecular entities have become increasingly valuable for medicinal chemists' toolkits. Herein, we report the general synthesis of a new class of noncanonical amino acids (ncAA) with a cyclopropyl backbone to achieve conformational constraint and bearing C(sp3)-rich benzene bioisosteres. We also demonstrate preliminary studies toward utilities of these ncAA as building blocks for medicinal chemistry research.

Conversion of amino-terephthalonitriles to multi-substituted single benzene fluorophores with utility in bioimaging.

Substitution of two fluorine atoms of the tetrafluoroterephthalonitrile (TFTN) ring (ortho to each other) by amine nucleophiles through SNAr chemistry is achievable. However, tri- and tetra-substitution towards multi-substituted single benzene fluorophores (SBFs) is harder due to increased electron richness of the TFTN moiety. Tertiary amine donors promote the molecule towards such multi-substitution guided by the steric obstruction to intramolecular charge transfer to the TFTN ring. Contrarily, secondary amine substituents with better lone pair donation to the TFTN ring cannot induce the SNAr pathway and instead promote hydrolysis of the nitrile groups of the TFTN moiety. Theoretical investigations have helped unearth the reasons for this observed difference in chemical reactivities and also explain the differences in the emission spectra. Finally, the success of the synthetic method towards multi-substitution is showcased through creation of a highly lipophilic SBF bearing an octyl unit and demonstrating its utility in in vitro cellular imaging.

Permeability of Dermatological Solutes through the Short Periodicity Phase of Human Stratum Corneum Lipid Bilayers.

Determining the permeability of drug-like solutes through the densely packed and heterogeneous stratum corneum lipid layer presents a significant challenge. In this study, we employed umbrella sampling with a periodic weighing function applied to the center of mass of the lipid bilayers. Precise umbrella sampling was conducted with an interframe distance of 0.5 Å, spanning from the bilayer center to the water phase, and each frame was simulated for at least 20 ns. Autocorrelation functions, potential of mean force (PMF), and diffusivity profiles were analyzed for six solutes (testosterone, benzene, caffeine, ethanol, mannitol, and histidine). The results revealed that autocorrelations were dependent solely on the medium, whether water or lipid phase. Diffusivity and PMF profiles along the reaction coordinate were influenced by the hydrophilicity of the solute rather than its size. For hydrophobic solutes, the PMF curves exhibited a minimum at the bilayer center, while for hydrophilic solutes, the PMFs peaked at the bilayer center and lipid tails (where the lipid tails are not interacting with the cholesterol). Diffusivity curves were low at the bilayer center and water phase, with peaks observed at the headgroup or the boundary between fatty acid and cholesterol (1 nm from the bilayer center). The quantitative findings presented in this work hold significance for pharmacists and drug designers.

Fostering a Holistic Understanding of the Full Volatility Spectrum of Organic Compounds from Benzene Series Precursors through Mechanistic Modeling.

A comprehensive understanding of the full volatility spectrum of organic oxidation products from the benzene series precursors is important to quantify the air quality and climate effects of secondary organic aerosol (SOA) and new particle formation (NPF). However, current models fail to capture the full volatility spectrum due to the absence of important reaction pathways. Here, we develop a novel unified model framework, the integrated two-dimensional volatility basis set (I2D-VBS), to simulate the full volatility spectrum of products from benzene series precursors by simultaneously representing first-generational oxidation, multigenerational aging, autoxidation, dimerization, nitrate formation, etc. The model successfully reproduces the volatility and O/C distributions of oxygenated organic molecules (OOMs) as well as the concentrations and the O/C of SOA over wide-ranging experimental conditions. In typical urban environments, autoxidation and multigenerational oxidation are the two main pathways for the formation of OOMs and SOA with similar contributions, but autoxidation contributes more to low-volatility products. NOx can reduce about two-thirds of OOMs and SOA, and most of the extremely low-volatility products compared to clean conditions, by suppressing dimerization and autoxidation. The I2D-VBS facilitates a holistic understanding of full volatility product formation, which helps fill the large gap in the predictions of organic NPF, particle growth, and SOA formation.

Assessing the rigidity of cubanes and bicyclo(1.1.1)pentanes as benzene bioisosteres.

Aromatic rings are critical core substructures in the majority of pharmaceutical compounds. There is much recent interest in replacing aromatic structures with saturated bioisosteres of benzene, which are generally fused or bridged ring systems. These bioisosteres often show improved solubility properties compared to benzene, and may also undergo fewer unwanted metabolic processes. One key reason why aromatic rings have proven so successful in drug design is their rigidity. This paper uses molecular dynamics simulations supported by crystallographic data to assess the rigidity of bicyclopentane and cubane ring systems as two of the most common benzene bioisosteres and compares this to benzene. Whilst a benzene ring is shown to be more flexible than these two bioisosteres in terms of its dihedral ring flexibility, substituents around the ring tend to behave in a much more similar way in both benzene and the bioisosteric systems.

Alterations in leukocyte telomere length and mitochondrial DNA copy number in benzene poisoning patients.

OBJECTIVE: The aim of this study is to examine and evaluate the impact of benzene poisoning on the relative content of the mitochondrial MT-ND1 gene and telomere length in individuals with occupational chronic benzene poisoning (CBP) compared to a control group. The study will analyze and gather data on the mitochondrial gene content and telomere length in cases of benzene poisoning, and investigate the relationship with blood routine parameters in order to contribute scientific experimental data for the prevention and treatment of CBP. METHOD: The case group comprised 30 individuals diagnosed with occupational chronic benzene poisoning, whereas the control group consisted of 60 healthy individuals who underwent physical examinations at our hospital concurrently. Blood routine indicators were detected and analyzed, and the PCR method was employed to measure changes in mitochondrial MT-ND1 content and telomere length. Subsequently, a comparison and analysis of the aforementioned indicators was conducted. RESULT: The case group exhibited a higher mitochondrial gene content (median 366.2, IQR 90.0 rate) compared to the control group (median 101.5, IQR 12.0 rate), with a statistically significant difference between the two groups (P < 0.05). Additionally, the case group demonstrated lower white blood cell levels (3.78 ± 1.387 × 109/L) compared to the control group (5.74 ± 1.41 × 109/L), with a significant difference between the two groups (P < 0.05). Furthermore, the case group displayed lower red blood cell levels (3.86 ± 0.65 × 1012/L) compared to the control group (4.89 ± 0.65 × 1012/L), with a significant difference between the two groups (P < 0.05). The hemoglobin level in the case group (113.33 ± 16.34 g/L) was lower than that in the control group (138.22 ± 13.22 g/L). There was a significant difference between the two groups (P < 0.05). Platelet levels in the case group (153.80 ± 58.31 × 109/L) is smaller than the control group (244.92 ± 51.99 × 109/L), there was a significant difference between the two groups (P < 0.05). The average telomere length of the normal control group was 1.451 ± 0.475 (rate); The mean telomere length of individuals in the case group diagnosed with benzene poisoning was determined to be 1.237 ± 0.457 (rate). No significant correlation was observed between telomere length and three blood routine parameters, namely white blood cells (WBC), hemoglobin (HB), and platelets (PLT). However, a significant correlation was found between telomere length and red blood cell count (RBC). Additionally, a negative correlation was observed between mitochondrial gene content and white blood cell count (r = - 0.314, P = 0.026), as well as between mitochondrial gene content and red blood cell count (r = - 0.226, P = 0.032). Furthermore, a negative correlation was identified between mitochondrial gene content and hemoglobin (r = - 0.314, P = 0.028), and platelets (r = - 0.445, P = 0.001). CONCLUSION: Individuals diagnosed with occupational chronic benzene poisoning exhibit a reduction in telomere length and an elevation in the relative content of the mitochondrial MT-ND1 gene. Moreover, a negative correlation is observed between the content of the mitochondrial MT-ND1 gene and four blood routine parameters, namely white blood cells (WBC), red blood cells (RBC), hemoglobin (HB), and platelets (PLT). Consequently, benzene exposure may potentially contribute to the onset of premature aging.

Sulfonated Polyimide Membranes Constructed by Main-Chain and Molecular-Network Engineering Strategy for Direct Methanol Fuel Cell.

Excessive swelling is one important factor that leads to high fuel permeability and limited operating concentration of methanol for proton exchange membranes. Herein, a collaborative strategy of main-chain and molecular-network engineering is applied to lower swelling ratio and improve methanol resistance for highly sulfonated polyimide. Two m-phenylenediamine monomers (4-(2,3,5,6-tetrafluoro-4-vinylphenoxy)benzene-1,3-diamine and 4,6-bis(2,3,5,6-tetrafluoro-4-vinylphenoxy)benzene-1,3-diamine) with tetrafluorostyrol groups are designed and synthesized. Two series of cross-linked sulfonated polyimides (CSPI-Ts, CSPI-Bs) are prepared from the two diamines, 4,4'-diaminostilbene-2,2'-disulfonic acid and 1,4,5,8-naphthalenetetracarboxylicdianhydride. The rigid main-chain structure is cornerstone for wet CSPI-Ts and CSPI-Bs remaining stable at elevated temperatures. The introduction of hydrophobic cross-linked network further improves their dimensional stability and methanol resistance. CSPI-Ts and CSPI-Bs show obviously improved performances containing high proton conductivity (121 ± 0.27-158 ± 0.35 S cm-1 ), low swelling ratio (9.6 ± 0.40%-16.1 ± 0.01%) and methanol permeability (4.14-7.69 × 10-7 cm2 s-1 ) at 80 °C. The direct methanol fuel cell (DMFC) is assembled from CSPI-T-10 with balanced properties, and it exhibits high maximum power density (PDmax ) of 82.3 and 72.6 mW cm-2 in 2 and 10 m methanol solution, respectively. The ratio of PDmax in 10 m methanol solution to the value in 2 m methanol solution is as high as 88%. The CSPI-T-10 is promising proton exchange membrane candidate for DMFC application.

A Visible Light Responsive Smart Covalent Organic Framework with a Bridged Azobenzene Backbone.

Condensation of 3,3'-diamino-2,2'-ethylene-bridged azobenzene with 1,2,4,5-tetrakis-(4-formylphenyl) benzene produces a visible light responsive porous 2D covalent organic framework, COF-bAzo-TFPB, with a large surface area, good crystallinity, and thermal and chemical stability. The results demonstrate that the elaborated designed linker can make azo unit on the COF-bAzo-TFPB skeleton undergo reversible photoisomerization. This work expands the application scope of covalent organic frameworks in photo-controlled release, uptake of guest molecules, dynamic photoswitching, and UV-sensitive functions.

Associations of personal urinary volatile organic compounds and lung function in children.

BACKGROUND: We investigated the correlation between urine VOC metabolites and airway function in children exposed to anthropogenic volatile organic compounds (VOCs), notable pollutants impacting respiratory health. METHODS: Out of 157 respondents, 141 completed skin prick tests, spirometry, IOS, and provided urine samples following the International Study of Asthma and Allergies in Childhood (ISAAC)-related questions. Allergic sensitization was assessed through skin prick tests, and airway functions were evaluated using spirometry and impulse oscillometry (IOS). Forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC) was recorded and FEV1/FVC ratio was calculated. Airway mechanics parameters including respiratory resistance at 5 Hz (Rrs5) mean respiratory resistance between 5 Hz and 20 Hz (Rrs5-20), were also recorded. Urine concentrations of metabolites of benzene, ethylbenzene, toluene, xylene, styrene, formaldehyde, carbon-disulfide were analyzed by gas chromatography/tandem mass spectroscopy. RESULTS: The median age at study participation was 7.1 (SD 0.3) years. Muconic acid (benzene metabolites) and o-methyl-hippuric acid (xylene metabolites) above medians were associated with a significant increase in Rrs5 (muconic acid: aß = 0.150, p = .002; o-methyl-hippuric acid: aß = 0.143, p = .023) and a decrease in FEV1/FVC (o-methyl-hippuric acid: aß = 0.054, p = .028) compared to those below median. No associations were observed for Rrs5-20 and FEV1 between the groups categorized as above and below the median (all parameter p values > .05). CONCLUSIONS: Elevated levels of benzene and xylene metabolites were associated with a significant increase in Rrs5 and a decrease in FEV1/FVC, related to increased resistance and restrictive lung conditions compared to individuals with concentrations below the median.

Structure-based design and synthesis of anti-fibrotic compounds derived from para-positioned 3,4,5-trisubstituted benzene.

Liver fibrosis is an abnormal wound-healing response to liver injuries. It can lead to liver cirrhosis, and even liver cancer and liver failure. There is a lack of treatment for liver fibrosis and it is of great importance to develop anti-fibrotic drugs. A pivotal event in the process of developing liver fibrosis is the activation of hepatic stellate cells (HSCs), in which the nuclear receptor Nur77 plays a crucial role. This study aimed to develop novel anti-fibrotic agents with Nur77 as the drug target by modifying the structure of THPN, a Nur77-binding and anti-melanoma compound. Specifically, a series of para-positioned 3,4,5-trisubstituted benzene ring compounds with long-chain backbone were generated and tested for anti-fibrotic activity. Among these compounds, compound A8 was with the most potent and Nur77-dependent inhibitory activity against TGF-ß1-induced activation of HSCs. In a crystal structure analysis, compound A8 bound Nur77 in a peg-in-hole mode as THPN did but adopted a different conformation that could interfere the Nur77 interaction with AKT, which was previous shown to be important for an anti-fibrotic activity. In a cell-based assay, compound A8 indeed impeded the interaction between Nur77 and AKT leading to the stabilization of Nur77 without the activation of AKT. In a mouse model, compound A8 effectively suppressed the activation of AKT signaling pathway and up-regulated the cellular level of Nur77 to attenuate the HSCs activation and ameliorate liver fibrosis with no significant toxic side effects. Collectively, this work demonstrated that Nur77-targeting compound A8 is a promising anti-fibrotic drug candidate.

False positives and false negatives in benzene biological monitoring.

Benzene is a commonly used industrial chemical that is a significant environmental pollutant. Occupational health specialists and industrial toxicologists are concerned with determining the exact amount of exposure to chemicals in the workplace. There are two main approaches to assess chemical exposure; air monitoring and biological monitoring. Air monitoring has limitations, which biological monitoring overcomes and could be used as a supplement to it. However, there are several factors that influence biological monitoring results. It would be possible to assess exposure more accurately if these factors were taken into account. This study aimed to review published papers for recognizing and discussing parameters that could affect benzene biological monitoring. Two types of effects can be distinguished: positive and negative effects. Factors causing positive effects will increase the metabolite concentration in urine more than expected. Furthermore, the parameters that decrease the urinary metabolite level were referred to as false negatives. From the papers, sixteen influential factors were extracted that might affect benzene biological monitoring results. Identified factors were clarified in terms of their nature and mechanism of action. It is also important to note that some factors influence the quantity and quality of the influence of other factors. As a result of this study, a decision-making protocol was developed for interpreting the final results of benzene biological monitoring.

Climatic conditions and concentrations of BTEX compounds in atmospheric media.

Climatic and meteorological conditions are among the factors affecting the ambient concentrations of BTEX compounds. This systematic review and meta-analysis aimed to interrogate the seasonal effect of climatic conditions on the concentrations of BTEX compounds. Three electronic bibliographic databases including Scopus, PubMed, and Web of Science were systematically searched up to November 14, 2023. The search algorithm followed PRISMA guidance and consisted of three groupings of keywords and their possible combinations. For various climatic conditions, the overall mean and 95% confidence interval (CI) of effect size related to BTEX concentrations were calculated using a random-effect model. In total, 104 articles were included for evaluation in this review. BTEX ambient concentration was higher in winter (ranging from 36 out of 79 relevant studies for xylene to 52 out of 97 relevant studies for benzene) followed by summer and autumn. For humidity conditions, the highest exposure values for BTEX were detected for rainy weather (ranging from 3 out of 5 relevant studies for toluene and xylene to 4 out of 5 relevant studies for benzene and ethyl benzene) compared to dry conditions. The pooled concentration (µg/m3) of benzene, toluene, ethyl benzene, and xylene were computed as 2.61, 7.12, 2.21, and 3.61 in spring, 2.13, 7.53, 1.61, and 2.75 in summer, 3.04, 9.59, 3.14, and 5.50 in autumn, and 3.56, 8.71, 2.35, and 3.91 in winter, respectively. Moreover, the pooled concentrations (µg/m3) of BTEX were measured as 2.98, 7.22, 1.90, and 3.03 in dry weather and 3.15, 6.30, 2.14, and 3.86 in rainy or wet weather, respectively. In most seasons, the ambient concentrations of BTEX were higher in countries with low and middle incomes and in Middle Eastern countries and East/Southeast Asia compared to those in other regions (P < 0.001). The increasing concentrations of BTEX in winter and autumn followed by the summer season and during rainy/wet weather appear to be reasonably consistent despite variations in study methods, quality, or geography. Therefore, it is recommended that more serious control measures are considered for decreasing exposure to BTEX in these climatic conditions.