Assessment of cephalometric parameters and correlation with the severity of the obstructive sleep apnea syndrome.

BACKGROUND: In individuals diagnosed with obstructive sleep apnea syndrome (OSAS), variations in craniofacial structure have been inconsistently documented, showing differing degrees of alteration between obese and nonobese patients. In addition, sleep disturbance has also been shown to induce disequilibrium in this population of patients. This pilot observational study aimed to assess craniofacial values in obese and nonobese subpopulations of patients with OSAS and their correlation and association with the severity of OSAS. We also assessed whether OSAS patients are characterized by an impaired equilibrium in relation to and associated with the severity of OSAS. METHODS: We included all consecutive adult patients with OSAS. Through cephalometry, we assessed the upper (UPa-UPp) and lower (LPa-LPp) pharynx diameters, superior anterior facial height (Sor-ANS), anterior facial height (ANS-Me), anterior vertical dimension (Sor-Me), posterior facial height (S-Go) and craniovertebral angle (CVA). Furthermore, we analyzed postural equilibrium through a stabilometric examination. RESULTS: Forty consecutive OSAS patients (45% female with a mean age of 56 ± 8.2 years) were included. The subgroup of nonobese patients had a reduced UPa-UPp (p = 0.02). Cephalometric measurements were correlated with the severity of OSAS in nonobese patients, whereas only Sor-ANS was correlated with the severity of OSAS in the obese subpopulation. In the overall population, altered craniofacial values are associated with severe OSAS. Although there are differences in equilibrium between obese and nonobese OSAS patients, the stabilometric measurements were not correlated or associated with OSAS severity. CONCLUSION: Altered craniofacial values and compromised equilibrium in OSAS patients are linked to OSAS severity. Therefore, the management of OSAS should be tailored not only to weight management but also to craniofacial and postural rehabilitation to enhance patient outcomes.

Craniofacial risk factors for obstructive sleep apnea-systematic review and meta-analysis.

Obstructive sleep apnea (OSA) is caused by temporary partial or complete constriction of the upper airway during sleep which leads to reduced blood oxygen and cardiovascular risks. Main symptoms vary between adults and children leading to misdiagnosis or delayed patient identification. To improve early diagnosis, lateral cephalograms can provide craniofacial measurements associated with a higher risk of OSA. In order to identify the most relevant craniofacial measurements, a systematic literature review with meta-analysis was conducted combining the terms 'orthodontic*', 'craniofacial', 'cephalometr*', 'cephalogram', 'OSA*', 'UARS', 'SDB', 'sleep disordered breathing', 'sleep apnea' and 'sleep apnoea'. Of 3016 publications, 19 were included in the systematic review and meta-analysis, 15 with adult patients and four with children. A total of 16 measurements (six angles, 10 distances) were compared, nine showed a possible influence in patients with OSA compared to controls: NSBa angle (-0.28°), ANB angle (+0.33°), ML-NSL angle (+0.34°), Me-Go-Ar angle (+0.33°), SN distance (-0.70 mm), N-ANS distance (-0.36 mm), MP-H distance (+1.18 mm), uvula length (+1.07 mm) and thickness (+0.96 mm). Posterior airway measurements were not sufficiently described or comparably measured to be statistically analysed. There is some evidence for altered craniofacial anatomy in patients with OSA compared to controls. Lateral cephalograms should be screened for these aspects routinely to improve early diagnosis of OSA and craniofacial orthopaedics should complement the interdisciplinary treatment plan for young patients with OSA.

Exploring cranial macromorphoscopic variation and classification accuracy in a South African sample.

To date South African forensic anthropologists are only able to successfully apply a metric approach to estimate population affinity when constructing a biological profile from skeletal remains. While a non-metric, or macromorphoscopic approach exists, limited research has been conducted to explore its use in a South African population. This study aimed to explore 17 cranial macromorphoscopic traits to develop improved methodology for the estimation of population affinity among black, white and coloured South Africans and for the method to be compliant with standards of best practice. The trait frequency distributions revealed substantial group variation and overlap, and not a single trait can be considered characteristic of any one population group. Kruskal-Wallis and Dunn's tests demonstrated significant population differences for 13 of the 17 traits. Random forest modelling was used to develop classification models to assess the reliability and accuracy of the traits in identifying population affinity. Overall, the model including all traits obtained a classification accuracy of 79% when assessing population affinity, which is comparable to current craniometric methods. The variable importance indicates that all the traits contributed some information to the model, with the inferior nasal margin, nasal bone contour, and nasal aperture shape ranked the most useful for classification. Thus, this study validates the use of macromorphoscopic traits in a South African sample, and the population-specific data from this study can potentially be incorporated into forensic casework and skeletal analyses in South Africa to improve population affinity estimates.

Validating the use of clinical MSCT scans for cranial nonmetric sex estimation in a contemporary Indonesian population.

There is renewed interest in Asia for the development of forensic anthropological standards, partly due to the need for population-specific models to maintain high classification accuracies. At present, there are no known studies utilising morphoscopic standards specific to the Indonesian population. Craniometric analyses can often be time-consuming; morphoscopic assessments are quicker and are also known to be reliable and accurate. One of the most utilised morphoscopic standards for the estimation of skeletal sex is that of Walker (2008). Its application across population groups demonstrated reduced accuracies outside of the United States; population-specific predictive models would thus serve to improve the identification process of unknown skeletal remains. Digital imaging also allows for the validation of standards on a contemporary population and is an appropriate proxy to physical skeletal material.The present study quantifies the applicability of the Walker standard to a contemporary Indonesian population. A total of 200 cranial MSCT scans from a hospital in Makassar were analysed using OsiriX®. Scoring was performed in accordance with the Walker standard. Five univariate and nine multivariate predictive models were derived using single trait and multi-trait combinations. The best performing univariate model included the glabella, with a total classification accuracy of 82.0% and a sex bias of 14.6%. Classification accuracy with all traits considered was at 95.2% for females and 82.8% for males with a sex bias of 12.5%. These results provide forensic practitioners in Indonesia with an appropriate morphoscopic sex estimation standard, strengthening their capabilities in the field and improving judicial outcomes.

Predicting newborn birth outcomes with prenatal maternal health features and correlates in the United States: a machine learning approach using archival data.

BACKGROUND: Newborns are shaped by prenatal maternal experiences. These include a pregnant person's physical health, prior pregnancy experiences, emotion regulation, and socially determined health markers. We used a series of machine learning models to predict markers of fetal growth and development-specifically, newborn birthweight and head circumference (HC). METHODS: We used a pre-registered archival data analytic approach. These data consisted of maternal and newborn characteristics of 594 maternal-infant dyads in the western U.S. Participants also completed a measure of emotion dysregulation. In total, there were 22 predictors of newborn HC and birthweight. We used regularized regression for predictor selection and linear prediction, followed by nonlinear models if linear models were overfit. RESULTS: HC was predicted best with a linear model (ridge regression). Newborn sex (male), number of living children, and maternal BMI predicted a larger HC, whereas maternal preeclampsia, number of prior preterm births, and race/ethnicity (Latina) predicted a smaller HC. Birthweight was predicted best with a nonlinear model (support vector machine). Occupational prestige (a marker similar to socioeconomic status) predicted higher birthweight, maternal race/ethnicity (non-White and non-Latina) predicted lower birthweight, and the number of living children, prior preterm births, and difficulty with emotional clarity had nonlinear effects. CONCLUSIONS: HC and birthweight were predicted by a variety of variables associated with prenatal stressful experiences, spanning medical, psychological, and social markers of health and stress. These findings may highlight the importance of viewing prenatal maternal health across multiple dimensions. Findings also suggest that assessing difficulties with emotional clarity during standard obstetric care (in the U.S.) may help identify risk for adverse newborn outcomes.

Interaction of maternal smoking and gestational diabetes mellitus on newborn head circumference and birthweight.

INTRODUCTION: Maternal smoking during pregnancy and gestational diabetes mellitus (GDM) have opposite effects on fetal growth during pregnancy. The aim of the study was to evaluate the interaction of smoking during pregnancy and gestational diabetes mellitus on head circumference and birthweight of newborns. MATERIAL AND METHODS: The study included all primiparous women with singleton pregnancies (n = 290 602) without previously diagnosed diabetes or hypertension in Finland between 2006 and 2018. The information on gestational diabetes mellitus, newborn birthweight and head circumference, and maternal smoking and backgrounds was derived from the Finnish Medical Birth Register. Linear regression models were used in the analyses. RESULTS: In total 8.0% of parturients quit smoking during the first trimester and 9.9% continued smoking thereafter. The prevalence of GDM was 8.9% (n = 25 948). Newborns of women who continued smoking had a smaller head circumference (b = -0.24, SE = 0.01, p < 0.0001) and birthweight (b = -0.28, SE = 0.01, p < 0.0001) compared to newborns of women who did not smoke. Head circumference and birthweight were greater in newborns of women with GDM (b = 0.09, SE = 0.01, p < 0.0001 and b = 0.16, SE = 0.01, p < 0.0001, respectively) compared to newborns of women without GDM. In the interaction analyses, head circumference (b = -0.13, SE = 0.01, p < 0.0001) was smaller and birthweight (b = -0.13, SE = 0.02, p < 0.0001) was lower in newborns of women with GDM who continued smoking compared to newborns of women without GDM who did not smoke. CONCLUSIONS: Although smoking and GDM have opposite effects on fetal growth, the negative effects of exposure to smoking are also seen in newborns of women with GDM. Compared to smoking after the first trimester of pregnancy, cessation of smoking during the first trimester was associated with greater head circumference and birthweight in newborns.

Comparative Evaluation of Digital Cephalometric Tracing Applications on Mobile Devices and Manual Tracing.

BACKGROUND Cephalometric radiography evaluates facial skeleton development and aids in diagnosis and treatment phases (pre and post) in orthodontics. This study aimed to compare digital cephalometric tracing using a smartphone application (App), a tablet-based platform, and manual tracing in 30 orthodontic patients. MATERIAL AND METHODS Thirty orthodontic pretreatment, criteria based, lateral cephalometric radiographs were analyzed/grouped for Steiner analysis parameters (5 skeletal, 3 dentals, 1 soft tissue) by 3 tracing methods [manual - group (Gp M), smartphone (Android - OS9) - Gp S, tablet (Apple - IOS13) - Gp T) after mandatory standardization/calibration. Measurements include 5 angular (SNA, SNB, ANB, SNMPA, SNOP), 3 linear U1NA, L1NB, U1L1, and 1 soft tissue (S line) (millimeters and degrees). Inter-examiner rating was determined using Dahlberg's test. After normality distribution testing (Shapiro-Wilk), data were analyzed using one-way analysis of variance (ANOVA) for group differences. Homogeneity of variance was verified using the Levene test. Differences were determined on probability value of (p≤0.05). RESULTS The results showed that Steiner's analysis parameters were similar in all groups with homogenous variances. Highest differences in mean values were found for L1NB, U1L1, and S line measurement, with higher values being observed in Gp S tracings. However, these differences were not statistically significant (p≤0.05). All parameters, irrespective of being measured in either degrees or millimeters, had means comparable to each other. CONCLUSIONS Smartphone and tablet-based applications produced tracings that were comparable and reliable when compared to conventional manual tracings. Standardization of images, processing, printing, and calibration of devices is important to achieve good results.

Accuracy and clinical validity of automated cephalometric analysis using convolutional neural networks.

BACKGROUND: This study aimed to assess the error range of cephalometric measurements based on the landmarks detected using cascaded CNNs and determine how horizontal and vertical positional errors of individual landmarks affect lateral cephalometric measurements. METHODS: In total, 120 lateral cephalograms were obtained consecutively from patients (mean age, 32.5 ± 11.6) who visited the Asan Medical Center, Seoul, Korea, for orthodontic treatment between 2019 and 2021. An automated lateral cephalometric analysis model previously developed from a nationwide multi-centre database was used to digitize the lateral cephalograms. The horizontal and vertical landmark position error attributable to the AI model was defined as the distance between the landmark identified by the human and that identified by the AI model on the x- and y-axes. The differences between the cephalometric measurements based on the landmarks identified by the AI model vs those identified by the human examiner were assessed. The association between the lateral cephalometric measurements and the positioning errors in the landmarks comprising the cephalometric measurement was assessed. RESULTS: The mean difference in the angular and linear measurements based on AI vs human landmark localization was .99 ± 1.05°, and .80 ± .82 mm, respectively. Significant differences between the measurements derived from AI-based and human localization were observed for all cephalometric variables except SNA, pog-Nperp, facial angle, SN-GoGn, FMA, Bjork sum, U1-SN, U1-FH, IMPA, L1-NB (angular) and interincisal angle. CONCLUSIONS: The errors in landmark positions, especially those that define reference planes, may significantly affect cephalometric measurements. The possibility of errors generated by automated lateral cephalometric analysis systems should be considered when using such systems for orthodontic diagnoses.

Reconsidering the role of nasolabial angle in premolar extraction decision-making: A case-series study.

OBJECTIVES: To evaluate the impact of changes in upper incisor inclination and position on the alteration of the nasolabial angle (NLA) in a series of cases involving the extraction of four first premolars. MATERIALS AND METHODS: The study included 41 patients who underwent orthodontic treatment with premolar extractions. The patients were divided into two groups based on their pretreatment NLA values: Group 1 (NLA ≤ 100°) and Group 2 (NLA > 100°). Measurements of NLA, U1.NA and U1-NA were obtained before and after treatment and U1-Ls pretreatment measure was registered. Statistical analyses were performed to compare the differences in NLA, U1.NA and U1-NA between the two groups and to evaluate the influence of these variables added to U1-Ls (T1) on NLA changes. RESULTS: The results showed that Group 1 exhibited significant changes in NLA, while Group 2 did not. However, both groups showed significant changes in U1.NA and U1-NA. In Group 1, 80% of the individuals presented an increase in NLA and 20% no changes. In Group 2, 10% presented a decrease, 57% no changes and 33% an increase in NLA values. Multiple linear regression analysis indicated that the group factor had a statistically significant influence on NLA variation. Additionally, in Group 2, a negative correlation was observed between changes in U1.NA and NLA. CONCLUSIONS: The findings suggest that individuals with higher pretreatment NLA values tend to maintain their NLA values even after the correction of upper incisor inclination.

A comparison of maxillary posterior changes following facemask therapy: Skeletal anchorage versus tooth-borne anchorage.

OBJECTIVE: To compare changes in the maxillary posterior structure as seen in cone-beam computed tomography (CBCT) images resulting from facemask therapy using skeletal (miniplate/FM) anchorage versus tooth-borne anchorage (RME/FM). MATERIALS AND METHODS: A retrospective study was conducted on 20 patients divided into the miniplate/FM group (nine patients aged 9.5 ± 1.4 years) and the RME/FM group (11 patients aged 9.2 ± 1.4 years). CBCT images before and after facemask therapy were evaluated to assess changes in the maxillary posterior structure. RESULTS: The miniplate/FM group had greater advancement of the maxilla and midface compared to the RME/FM group (p < .05). Specifically, there was about three times more advancement of the pterygomaxillary suture in the miniplate/FM group than in the RME/FM group (p < .05). Moreover, the advancement of the pterygomaxillary suture was about half the advancement of A point in the miniplate/FM group, while only about 25% in the RME/FM group. Finally, the miniplate/FM group showed an increase in the transverse dimension of the posterior and superior parts of the maxilla (p < .05). CONCLUSION: There was greater forward movement of the pterygomaxillary suture with facemask therapy using the skeletal anchorage compared to tooth-borne anchorage, leading to a more significant advancement of the maxilla and midface.

Asymmetry in Class II subdivision malocclusion: Assessment based on 3D surface models.

INTRODUCTION: There is currently no consensus in the literature whether the aetiology of a Class II subdivision is dental, skeletal or both. The aim of this study was to identify and quantify skeletal and dental asymmetries in Class II subdivision malocclusions. METHODS: CBCTs from 33 Class II subdivision malocclusion patients were used to construct 3D volumetric label maps. Eighteen landmarks were identified. The original scan and associated 3D volumetric label map were mirrored. Registration of the original and mirrored images relative to the anterior cranial base, maxilla and mandible were performed. Surface models were generated, and 3D differences were quantified. Statistical analysis was performed. RESULTS: Anterior cranial base registration showed significant differences for fossa vertical difference, fossa roll, mandibular yaw, mandibular lateral displacement and lower midline displacement. Regional registrations showed significant differences for antero-posterior (A-P) mandibular length, maxillary roll, A-P maxillary first molar position, maxillary first molar yaw and maxillary first molar roll. Class II subdivision patients also show an asymmetric mandibular length as well as an asymmetric gonial angle. Moderate correlations were found between the A-P molar relationship and fossa A-P difference, mandibular first molar A-P difference, maxillary first molar A-P difference and maxillary first molar yaw. CONCLUSIONS: This study suggests that Class II subdivisions can result from both significant skeletal and dental factors. Skeletal factors include a shorter mandible as well as posterior and higher displacement of the fossa on the Class II side, resulting in mandibular yaw. Dental factors include maxillary and mandibular first molar antero-posterior asymmetry.

Effect of functional appliances on sleep-disordered breathing in Class II division 1 malocclusion children: Randomized controlled trial.

OBJECTIVES: A randomized controlled trial was undertaken to investigate the orthopaedic effect of functional appliances on the pharyngeal airway space and nocturnal breathing of children with skeletal class II due to mandibular retrusion. MATERIALS AND METHODS: Forty patients were randomized into a 1:1 ratio study (Twin block) group and a control (fixed appliance) group. Each group included equal numbers of boys and girls. Diagnosis with sleep-disordered breathing was not an inclusion criterion. The duration of the trial was 12 months (T0 - T12). Eligibility criteria included skeletal Class II division 1 malocclusion with mandibular retrognathism, SNA ≥82, SNB ≤78, ANB ≥4, overjet ≥6 mm, and patients in circumpubertal stage CVM2 and CVM3. The main outcomes were pharyngeal airway volume, oxygen desaturation index (ODI), and maximum expiratory pressure (MEP), while the secondary outcomes were skeletal and dental changes of the maxilla and mandible. Randomization was accomplished with random blocks of 20 patients with allocation concealed in sequentially numbered, opaque, and sealed envelopes. Blinding was only applicable for data analysis of radiographic measurements and data extracted from the pulse oximeter. RESULTS: The mean age of the patients was 10 ± 1.5 and 10 ± 1.2 at (T0) for the Twin Block and the control groups, respectively. The changes in the oropharyngeal (2.66 cc and 0.056; P = .03) and nasopharyngeal (1.3 cc and 0.84; P = .053) airway volumes for the Twin block and control groups, respectively, were significantly different for the oropharynx. There was a significant decrease in ODI by [median -3.55 (-5.05 to 0.50); P ≤ .001] and a significant increase [median 45 (0.0-110); P ≤ .001] in MEP for the Twin block group. A significant inverse correlation (r = -.589; P = .006) could be found between the total volume of the oropharynx and ODI. No serious harm was observed. CONCLUSIONS: The Twin block group showed significant change in oropharyngeal airway volume and improvement of nocturnal breathing. REGISTRATION: This trial was registered at https://www. CLINICALTRIALS: gov, registration number NCT04255511.

Long-term effects produced by early treatment of Class III malocclusion with rapid maxillary expansion and facemask followed by fixed appliances: A multicentre retro-prospective controlled study.

OBJECTIVE: To assess the short- and long-term dentoskeletal effects of early Class III treatment with rapid maxillary expansion and facemask (RME/FM) followed by fixed appliances. MATERIALS AND METHODS: A total of 44 patients (27 females, 17 males) treated consecutively with RME/FM were included from the archives of 3 centres. Three lateral cephalograms were available: T0 (before the start of RME/FM therapy, mean age 8.1 ± 1.8 years), T1 (immediately after RME/FM, mean age 9.8 ± 1.6 years), and T2 (long-term observation, mean age 19.5 ± 1.6 years). A control group of 17 untreated Class III subjects (12 females and 5 males) also was selected. Between-group statistical comparisons were performed with ANCOVA. RESULTS: No statistically significant differences for any of the cephalometric variables were found at T0. In the short term, the treated group showed significant improvements in ANB (+2.9°), Wits appraisal (+2.7 mm), SNA (+1.8°) and SNB (-1.1°). A significant closure of CoGoMe angle (-1.3°) associated with smaller increments along Co-Gn (-2.4 mm) also was found together with a significant increase in intermaxillary divergence (+1.3°). In the long-term, significant improvements in ANB (+2.6°), Wits appraisal (+2.7 mm) and SNB (-1.7°) were recorded together with a significant closure of the CoGoMe angle (-2.9°). No significant long-term changes in vertical skeletal relationships were found. CONCLUSIONS: RME/FM therapy was effective in improving Class III dentoskeletal relationships in the short term. These changes remained stable in the long-term due mainly to favourable mandibular changes.

Accuracy of artificial intelligence-assisted growth prediction in skeletal Class I preadolescent patients using serial lateral cephalograms for a 2-year growth interval.

OBJECTIVE: To investigate the accuracy of artificial intelligence-assisted growth prediction using a convolutional neural network (CNN) algorithm and longitudinal lateral cephalograms (Lat-cephs). MATERIALS AND METHODS: A total of 198 Japanese preadolescent children, who had skeletal Class I malocclusion and whose Lat-cephs were available at age 8 years (T0) and 10 years (T1), were allocated into the training, validation, and test phases (n = 161, n = 17, n = 20). Orthodontists and the CNN model identified 28 hard-tissue landmarks (HTL) and 19 soft-tissue landmarks (STL). The mean prediction error values were defined as 'excellent,' 'very good,' 'good,' 'acceptable,' and 'unsatisfactory' (criteria: 0.5 mm, 1.0 mm, 1.5 mm, and 2.0 mm, respectively). The degree of accurate prediction percentage (APP) was defined as 'very high,' 'high,' 'medium,' and 'low' (criteria: 90%, 70%, and 50%, respectively) according to the percentage of subjects that showed the error range within 1.5 mm. RESULTS: All HTLs showed acceptable-to-excellent mean PE values, while the STLs Pog', Gn', and Me' showed unsatisfactory values, and the rest showed good-to-acceptable values. Regarding the degree of APP, HTLs Ba, ramus posterior, Pm, Pog, B-point, Me, and mandibular first molar root apex exhibited low APPs. The STLs labrale superius, lower embrasure, lower lip, point of lower profile, B', Pog,' Gn' and Me' also exhibited low APPs. The remainder of HTLs and STLs showed medium-to-very high APPs. CONCLUSION: Despite the possibility of using the CNN model to predict growth, further studies are needed to improve the prediction accuracy in HTLs and STLs of the chin area.

Cephalometric changes of pushing splints 3 compared to rapid maxillary expansion and facemask therapy on the airway space in class III growing patients: A randomized clinical trial.

BACKGROUND: Early orthopaedic treatment with rapid maxillary expansion (RME) associated with facemask (FM) has been shown to be effective in correcting Class III malocclusions in children. Treatment with pushing splints 3 (PS3) has shown to correct skeletal discrepancies in Class III growing patients. However, the effects of orthopaedic treatment on the upper airways in children with Class III malocclusion is controversial. OBJECTIVES: The aim of this study was to evaluate the cephalometric changes in the airways of PS3 compared to the RME/FM protocol. MATERIALS AND METHODS: In this study, 48 patients with Class III malocclusion (age range 5.5-8.5 years old) were selected for this study, and 24 were treated with PS3 appliance and 24 with RME/FM therapy. Lateral cephalograms before (T0) and at the end of the treatment (T1) were analysed to compare pharyngeal spaces. Paired and unpaired t tests were used for data analysis (P < .05). RESULTS: A total of 41 patients (21 patients for the PS3 group, 11 males and 10 females, mean age 7.0 ± 1.2 years; 20 patients for the RME/FM group, 10 males and 10 females, mean age 7.2 ± 1.3 years) were included. The results showed a statistically significant (P < .05) increase in the nasopharyngeal space after both therapies. However, the effects were similar considering that there were no differences between groups for the assessed variables at T0-T1. CONCLUSIONS: Early treatment of Class III malocclusion with PS3 does not induce a statistically significant increase in the sagittal airway space compared to RME/FM. The absence of untreated group could not define the role of growth in the increase of space.

Temporomandibular joint disc position and shape in patients submitted to two protocols of rapid maxillary expansion and face mask therapy: A randomized clinical trial.

OBJECTIVE: The objective of this prospective study was to assess possible changes in the position and shape of the temporomandibular joint (TMJ) articular disc in patients treated with two protocols of rapid maxillary expansion (RME) and face mask (FM) therapy. METHODS: A sample of 88 patients with Class III or Class III subdivision malocclusions, aged between 6 and 13 years, were consecutively selected and divided into three groups (G): G1-34 patients were treated with RME, followed by FM therapy; G2-34 patients were treated using RME according to modified alternate rapid maxillary expansion and constriction (ALT-RAMEC) protocol, followed by FM therapy. These treated groups were randomly (1:1 allocation ratio) distributed according to the two treatment protocols. G3 - Control Group - 20 untreated patients were followed. Magnetic resonance imaging (MRI) TMJs were obtained before (T1) and after (T2) a treatment period or follow-up. McNemar test, Fisher's exact test and intra- and inter-observer concordance (K) were performed (p ≤ .05). RESULTS: There were no statistically significant differences in the baseline cephalometric variables at T1 between the groups. There were statistically significant differences between the groups (p < .001) in relation to the disc shape in T1, since G1 (8 TMJs -11.76%) presented higher occurrences of altered forms in comparison with G2 (no changes). No significant differences were observed in disc position CM and OM (G1 - p > .999; G2 - p = .063; G3 - p = .500) and shape (G1 - p > 0.999; G2 - p = .250; G3 - not calculable), between T1 × T2, in any of the groups studied. CONCLUSION: The two treatment protocols did not have adverse effects on the position and shape of the TMJ disc, in a short-term evaluation.

Skeletal and dental effects of function-generating bite appliance compared to rapid palatal expander and untreated controls.

INTRODUCTION: Maxillary expansion is a fundamental interceptive orthodontic treatment, which can be achieved through either a rapid expansion protocol or functional devices. However, no data exist about the efficacy of functional devices in achieving skeletal expansion. Therefore, the aim of this study was to compare the effects of the rapid palatal expander (RPE) and the function-generating bite type M (FGB-M) on the transversal dimension of the maxilla, and on the maxillary and mandibular dental arch width. METHODS: One hundred eighty-one skeletal Class I patients, aged between 6 and 12 years and with a cervical vertebral maturation stage II or III, with maxillary transversal deficiency were retrospectively enrolled; among these 55 were treated with FGB-M, 73 were treated with RPE and 51 were untreated subjects retrieved from historical databases. The pre-treatment (T0) and post-treatment (T1) frontal cephalograms were retrieved, and the maxillary and mandibular widths, and the distance between upper and lower first molars were measured. T1-T0 interval was of 17.3 months (RPE), 24.6 months (FGB-M) and 18.2 months (controls). RESULTS: The statistical analysis showed that there were no statistically significant differences between the RPE and FGB-M groups regarding skeletal and dental expansion, while the untreated control group differed significantly from the other two groups. CONCLUSION: The comparison between patients treated with RPE and FGB-M showed that there were no statistically significant differences between the RPE and FGB-M groups regarding the amount of skeletal expansion and dental arch width, suggesting that both appliances can be used to achieve similar results.

Correlation analysis of airway-facial phenotype in Crouzon syndrome by geometric morphometrics: A promising method for non-radiation airway evaluation.

AIM: This study aimed to verify the correlation of the airway-facial phenotype and visualize the morphological variation in Crouzon syndrome patients. Additionally, to develop a non-radiation methodology for airway assessments. METHOD: In this study, 22 patients diagnosed with Crouzon syndrome (Age: 7.80 ± 5.63 years; Gender distribution: 11 females and 11 males) were analysed. The soft tissue surface and airway were three-dimensionally reconstructed, and the entire facial phenotype was topologized and converted into spatial coordinates. Geometric morphometrics was employed to verify the correlation and visualize dynamic phenotypic variation associated with airway volume. A total of 276 linear variables were automatically derived from 24 anatomical landmarks, and principal component analysis (PCA) identified the 20 most significant parameters for airway evaluation. Correlation analyses between parameters and airway volume were performed. Then, patients were classified into three groups based on airway volume, and the differences among the groups were compared for evaluating the differentiating effectiveness of parameters. RESULTS: The facial phenotype was strongly correlated with the airway (coefficient: 0.758). Morphological variation was characterized by (i) mandibular protrusion and anticlockwise rotation; (ii) midface retrusion; (iii) supraorbital frontward and (iv) lengthening of the facial height. All the anthropometric parameters were strongly associated with the airway, and the differences among the groups were statistically significant. CONCLUSION: This study confirmed the strong correlation between facial phenotype and airway parameters in Crouzon syndrome patients. Despite the development of the airway, pathological midface retrusion was still aggravated, suggesting that surgical intervention was inevitable. Three-dimensional facial anthropometry has potential as a non-radiation examination for airway evaluation.

Evaluation of modified clear Twin Block aligner in treating adolescents with skeletal class II malocclusion: A two-centre cephalometric study.

INTRODUCTION: The purpose of this study was to evaluate the therapeutic effect of modified clear Twin Block (CTB) aligner and traditional twin block (TB) appliance from skeletal, dentoalveolar and soft tissue changes in adolescents with skeletal class II malocclusion. METHODS: A total of 80 adolescents, included in this study from two medical centres, were distributed into CTB group, TB group and control group based on the treatment they received. Lateral cephalograms at pre-treatment (T1) and post-treatment (T2) were measured by modified Pancherz's cephalometric analysis, and dentoskeletal and soft tissue changes were analysed by independent-sample t-test, paired-sample t-test, ANOVA test and Scheffe's Post Hoc test. RESULTS: Seventy-five adolescents completed the study, including 32 in the CTB group, 32 in the TB group and 11 in the control group. Both CTB and TB treatment showed significant differences in most dentoskeletal and soft tissue measurements. Compared with the control group, improvements were observed in class II molar relationship through significant different in S Vert/Ms-S Vert/Mi in the CTB group (P < .01) and the TB group (P < .001), as well as deep overjet through significant different in S Vert/Is-S Vert/Ii in the CTB group (P < .001) and the TB group (P < .001). Besides, the CTB group also showed less protrusion of lower incisors and resulted in a more significant improvement in profile with fewer adverse effects on speaking, eating and social activities. CONCLUSIONS: For adolescents with skeletal class II malocclusion, CTB appliance was as effective as TB on improving dentoskeletal and soft tissue measurements, featuring more reliable teeth control and patient acceptance.

Comparison of maxillary transversal changes between auxiliary beta-titanium expansion arch and miniscrew-assisted rapid palatal expansion.

OBJECTIVE(S): This study compared buccal bone thickness, dental inclinations and maxillary transverse width dimensions changes between auxiliary beta-titanium expansion arch (AEA) and miniscrew-assisted rapid palatal expansion (MARPE). MATERIALS AND METHODS: The sample consisted of 29 patients, aged between 18 and 40 years, with transverse maxillary deficiency and treated without extractions, divided into two groups: group AEA: comprised 13 individuals (initial mean age: 29.23 ± 9.13 years) treated using auxiliary beta-titanium expansion arch; group MARPE: comprised 16 patients (initial mean age: 24.92 ± 7.60 years) treated with miniscrew-assisted rapid palatal expansion. Buccal bone thickness, dental inclinations and transverse width dimensions (dental, nasal base and jugular) were measured in cone-bean computed tomographies at pre- and post-treatment stages. The variables were compared using the independent t-test. RESULTS: The buccal bone thickness was similar for both groups at the post-treatment stage. The second premolars were significantly more buccal inclined in the AEA group and the right maxillary first molars in the MARPE group. The intercanine and intermolar distances were statistically significantly greater in the MARPE group. Changes in dental arch transverse dimensions were significantly greater for the MARPE group. CONCLUSION: Both treatment protocols corrected the maxillary transverse discrepancy; however, MARPE provided greater correction.