Influence of Iron Substitution and Solution Composition on Brucite Carbonation.

Carbon neutral or negative mining can potentially be achieved by integrating carbon mineralization processes into the mine design, operations, and closure plans. Brucite [Mg(OH)2] is a highly reactive mineral present in some ultramafic mine tailings with the potential to be rapidly carbonated and can contain significant amounts of ferrous iron [Fe(II)] substituted for Mg; however, the influence of this substitution on carbon mineralization reaction products and efficiency has not been thoroughly constrained. To better assess the efficiency of carbon storage in brucite-bearing tailings, we performed carbonation experiments using synthetic Fe(II)-substituted brucite (0, 6, 23, and 44 mol % Fe) slurries in oxic and anoxic conditions with 10% CO2. Additionally, the carbonation process was evaluated using different background electrolytes (NaCl, Na2SO4, and Na4SiO4). Our results indicate that carbonation efficiency decreases with increasing Fe(II) substitution. In oxic conditions, precipitation of ferrihydrite [Fe10IIIO14(OH)2] and layered double hydroxides {e.g., pyroaurite [Mg6Fe2III(OH)16CO3·4H2O]} limited carbonation efficiency. Carbonation in anoxic environments led to the formation of Fe(II)-substituted nesquehonite (MgCO3·3H2O) and dypingite [Mg5(CO3)4(OH)2·âˆ¼5H2O], as well as chukanovite [Fe2IICO3(OH)2] in the case of 23 and 44 mol % Fe(II)-brucite carbonation. Carbonation efficiencies were consistent between chloride- and sulfate-rich solutions but declined in the presence of dissolved Si due to the formation of amorphous SiO2·nH2O and Fe-Mg silicates. Overall, our results indicate that carbonation efficiency and the long-term fate of stored CO2 may depend on the amount of substituted Fe(II) in both feedstock minerals and carbonate products.

Scaling-Free Cathodes: Enabling Electrochemical Extraction of High-Purity Nano-CaCO3 and -Mg(OH)2 in Seawater.

For electrochemical application in seawater or brine, continuous scaling on cathodes will form insulation layers, making it nearly impossible to run an electrochemical reaction continuously. Herein, we report our discovery that a cathode consisting of conical nanobundle arrays with hydrophobic surfaces exhibits a unique scaling-free function. The hydrophobic surfaces will be covered with microbubbles created by electrolytic water splitting, which limits scale crystals from standing only on nanotips of conical nanobundles, and the bursting of large bubbles formed by the accumulation of microbubbles will cause a violent disturbance, removing scale crystals automatically from nanotips. Benefiting from the scaling-free properties of the cathode, high-purity nano-CaCO3 (98.9%) and nano-Mg(OH)2 (99.5%) were extracted from seawater. This novel scaling-free cathode is expected to eliminate the inherent limitations of electrochemical technology and open up a new route to seawater mining.

Optimizing alkali-pretreatment dosage for waste-activated sludge disintegration and enhanced biogas production yield.

The rapid transition towards modernization and industrialization led to an increase in urban population, resulting in paramount challenge to municipal sewage sludge management. Anaerobic digestion (AD) serves as a promising venue for energy recovery from waste-activated sludge (WAS). Addressing the challenge of breaking down floc structures and microbial cells is crucial for releasing extracellular polymeric substances and cytoplasmic macromolecules to facilitate hydrolysis and fermentation process. The present study aims to introduce a combined process of alkaline/acid pre-treatments and AD to enhance sludge digestion and biogas production. The study investigates the influence of alkali pretreatment at ambient temperature using four alkali reagents (NaOH, Ca(OH)2, Mg(OH)2, and KOH). The primary goal is to provide insights into the intricate interplay of alkali dosages (0.04-0.12 g/gTS) on key physic-chemical parameters crucial for optimizing the pre-treatment dosage. Under the optimized alkaline/acid pre-treatment condition, the TSS reduction of 18%-30% was achieved. An increase in sCOD concentration (24%-50%) signifies the enhanced hydrolysis and solubilization rate of organic substrate in WAS. Finally, the biomethane potential test (BMPT) was performed for pre-treated WAS samples. The maximum methane (CH4) yield was observed in combination A1 (244 mL/g) and D1 (253 mL/g), demonstrating the pivotal role of alkali optimization in enhancing AD efficiency. This study serves as a valuable resource to policymakers, researchers, and technocrats in addressing challenges associated to sludge management.

A systematic review for prevention of cisplatin-induced nephrotoxicity using different hydration protocols and meta-analysis for magnesium hydrate supplementation.

BACKGROUND: Nephrotoxicity remains the most serious side effect of cisplatin therapy. Cisplatin-induced nephrotoxicity (CIN) limits the use of this drug and affects up to 20% of patients. Several possible interventions such as magnesium supplementation may prevent CIN. This study aimed to review different types of hydration protocols and we conducted a meta-analysis of magnesium supplementation to understand its effect in protecting against CIN. METHODS: A search of the PubMed, Embase, and Cochrane databases was performed. Trials were eligible if they enrolled patients who received cisplatin and different hydration protocols to prevent CIN. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated to assess the efficacy of different protocols. RESULTS: We initially identified 1113 different studies and included 33 of them which met the selection criteria. A meta-analysis of 11 retrospective studies that examined magnesium supplementation during hydration showed that this treatment provided significant protection against CIN (OR = 0.22, 95% CI = 0.14 to 0.35). CONCLUSION: There has been uncertainty regarding the best method to prevent CIN. Our results highlight the potentially protective effect of magnesium supplementation during hydration. This study is registered in PROSPERO, CRD42020212682.

Effect of an Antacid (Aluminum Hydroxide/Magnesium Hydroxide/Simethicone) or a Proton Pump Inhibitor (Omeprazole) on the Pharmacokinetics of Tebipenem Pivoxil Hydrobromide (TBP-PI-HBr) in Healthy Adult Subjects.

Tebipenem pivoxil hydrobromide (TBP-PI-HBr) is a novel oral carbapenem prodrug being developed for the treatment of serious bacterial infections. This open-label, 3-period, fixed sequence study evaluated the effect of gastric acid-reducing agents, aluminum hydroxide/magnesium hydroxide/simethicone, and omeprazole on the pharmacokinetics (PK) of tebipenem (TBP), the active moiety, following coadministration with immediate release TBP-PI-HBr during fasting. In Period 1, subjects received a single oral dose of TBP-PI-HBr 600 mg (2 × 300 mg tablets). In Period 2, subjects received a single oral dose of aluminum hydroxide 800 mg/magnesium hydroxide 800 mg/simethicone 80 mg suspension co-administered with a single dose of TBP-PI-HBr 600 mg. In Period 3, subjects received a single oral dose of omeprazole 40 mg once daily over 5 days, followed by single dose administration of TBP-PI-HBr 600 mg on day 5. In each period, whole blood samples were obtained prior to, and up to 24 h, following TBP-PI-HBr dose administration in order to characterize TBP PK. A 7-day washout was required between periods. Twenty subjects were enrolled and completed the study. Following co-administration of TBP-PI-HBr with either aluminum hydroxide/magnesium hydroxide/simethicone or omeprazole, total TBP exposure (area under the curve [AUC]) was approximately 11% (geometric mean ratio 89.2, 90% confidence interval: 83,2, 95.7) lower, and Cmax was 22% (geometric mean ratio 78.4, 90% confidence interval: 67.9, 90.6) and 43% (geometric mean ratio 56.9, 90% confidence interval: 49.2, 65.8) lower, respectively, compared to administration of TBP-PI-HBr alone. Mean TBP elimination half-life (t1/2) was generally comparable across treatments (range: 1.0 to 1.5 h). Concomitant administration of TBP-PI-HBr with omeprazole or aluminum hydroxide/magnesium hydroxide/simethicone is not expected to impact the efficacy of TBP-PI-HBr, as there is minimal impact on TBP plasma AUC, which is the pharmacodynamic driver of efficacy. Co-administration was generally safe and well tolerated.

In situ imaging of amorphous intermediates during brucite carbonation in supercritical CO2.

Progress in understanding crystallization pathways depends on the ability to unravel relationships between intermediates and final crystalline products at the nanoscale, which is a particular challenge at elevated pressure and temperature. Here we exploit a high-pressure atomic force microscope to directly visualize brucite carbonation in water-bearing supercritical carbon dioxide (scCO2) at 90 bar and 50 °C. On introduction of water-saturated scCO2, in situ visualization revealed initial dissolution followed by nanoparticle nucleation consistent with amorphous magnesium carbonate (AMC) on the surface. This is followed by growth of nesquehonite (MgCO3·3H2O) crystallites. In situ imaging provided direct evidence that the AMC intermediate acts as a seed for crystallization of nesquehonite. In situ infrared and thermogravimetric-mass spectrometry indicate that the stoichiometry of AMC is MgCO3·xH2O (x = 0.5-1.0), while its structure is indicated to be hydromagnesite-like according to density functional theory and X-ray pair distribution function analysis. Our findings thus provide insight for understanding the stability, lifetime and role of amorphous intermediates in natural and synthetic systems.

Synthesis of Graphene Quantum Dot Magnesium Hydroxide Nanocomposites and Investigation of Their Antioxidant and Antimicrobial Activities.

In this paper, we synthesized graphene quantum dots magnesium hydroxide nanocomposites (GQDs/Mg(OH)2). The synthesized nanocomposites were characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Malvern Zetasizer. The antimicrobial and antioxidant properties of the obtained GQDs/Mg(OH)2 nanocomposites were investigated. GQDs/Mg(OH)2 nanocomposites have MIC values of 15.625 µg/mL against fungi (C. metapsilosis and C. parapsilosis) and 62.5 µg/mL against Gram (+) (S. pneumonia and E. faecalis) and Gram (-) (E. coli). The synthesized GQDs/Mg(OH)2 nanocomposites showed moderate antioxidant activity. The results showed that at 100-µg/mL GQDs/Mg(OH)2 nanocomposite concentration, the H2O2 scavenging activity was 62.18%.

Magnesium hydroxide versus macrogol/electrolytes in the prevention of opioid-induced constipation in incurable cancer patients: study protocol for an open-label, randomized controlled trial (the OMAMA study).

BACKGROUND: Opioid-induced constipation (OIC) is a common symptom in cancer patients treated with opioids with a prevalence of up to 59%. International guidelines recommend standard laxatives such as macrogol/electrolytes and magnesium hydroxide to prevent OIC, although evidence from randomized controlled trials is largely lacking. The aim of our study is to compare magnesium hydroxide with macrogol /electrolytes in the prevention of OIC in patients with incurable cancer and to compare side-effects, tolerability and cost-effectiveness. METHODS: Our study is an open-label, randomized, multicenter study to examine if magnesium hydroxide is non-inferior to macrogol/electrolytes in the prevention of OIC. In total, 330 patients with incurable cancer, starting with opioids for pain management, will be randomized to treatment with either macrogol/electrolytes or magnesium hydroxide. The primary outcome measure is the proportion of patients with a score of < 30 on the Bowel Function Index (BFI), measured on day 14. The Rome IV criteria for constipation, side effects of and satisfaction with laxatives, pain scores, quality of life (using the EQ-5D-5L), daily use of laxatives and escape medication, and cost-effectiveness will also be assessed. DISCUSSION: In this study we aim to examine if magnesium hydroxide is non-inferior to macrogol/electrolytes in the prevention of OIC. The outcome of our study will contribute to prevention of OIC and scientific evidence of guidelines on (opioid-induced) constipation. TRIAL REGISTRATION: This trial is registered at clinicaltrials.gov: NCT05216328 and in the Dutch trial register: NTR80508. EudraCT number 2022-000408-36.

Effect of remediation reagents on bacterial composition and ecological function in black-odorous water sediments.

Black-odorous urban water bodies and sediments pose a serious environmental problem. In this study, we conducted microcosm batch experiments to investigate the effect of remediation reagents (magnesium hydroxide and calcium nitrate) on native bacterial communities and their ecological functions in the black-odorous sediment of urban water. The dominant phyla (Proteobacteria, Actinobacteria, Chloroflexi, and Planctomycetes) and classes (Alphaproteobacteria, Betaproteobacteria, and Gammaproteobacteria, Actinobacteria, Anaerolineae, and Planctomycetia) were determined under calcium nitrate and magnesium hydroxide treatments. Functional groups related to aerobic metabolism, including aerobic chemoheterotrophy, dark sulfide oxidation, and correlated dominant genera (Thiobacillus, Lysobacter, Gp16, and Gaiella) became more abundant under calcium nitrate treatment, whereas functional genes potentially involved in dissimilatory sulfate reduction became less abundant. The relative abundance of chloroplasts, fermentation, and correlated genera (Desulfomonile and unclassified Cyanobacteria) decreased under magnesium hydroxide treatment. Overall, these results indicated that calcium nitrate addition improved hypoxia-related reducing conditions in the sediment and promoted aerobic chemoheterotrophy.

Ag-Ag2O decorated multi-walled carbon nanotubes/NiCoAl hydrotalcite sensor for trace nitrite quantification.

Ag-Ag2O-decorated multiwall carbon nanotube/NiCoAl-hydrotalcite (CNT/LDH-Ag) composites were designed and synthesized for nitrite quantification. The materials were characterized by various techniques, and their electrochemical NO2- detection performances investigated using amperometric and differential pulse voltammetry (DPV) techniques. The Ag-Ag2O nanoparticles (NPs) were anchored on the surface of the CNT/LDH-Ag composites. At a suitable amount of the Ag-Ag2O loading, the Ag-Ag2O NPs with small particle size were distributed evenly on the CNT/LDH surface, increasing the surface area of the composites. The optimal CNT/LDH-Ag3 composite exhibited a high electrochemical activity for NO2- oxidation in pH 7.0. Furthermore, the optimal CNT/LDH-Ag3 composite was fabricated for trace NO2- quantification. The proposed sensor displayed a high sensitivity (0.0960 µA·µM-1·cm-2) and fast response (< 3 s) toward NO2- in a wide linear range from 0.250 µmol·L-1 to 4.00 mmol·L-1 with a low detection limit of 0.0590 µmol·L-1(S/N = 3). The sensor provided an outstanding analytical performance with a desirable recovery (95.3 ~ 107%, RSD < 1.05%) in real sample. As a result, the proposed sensor can be used for the real-time quantification of trace NO2- in the biological, food, and environmental fields.

The Optimal Concentration of Nanoclay Hydrotalcite for Recovery of Reactive and Direct Textile Colorants.

Concerns about the health of the planet have grown dramatically, and the dyeing sector of the textile industry is one of the most polluting of all industries. Nanoclays can clean dyeing wastewater using their adsorption capacities. In this study, as a new finding, it was possible to analyze and quantify the amount of metal ions substituted by anionic dyes when adsorbed, and to determine the optimal amount of nanoclay to be used to adsorb all the dye. The tests demonstrated the specific amount of nanoclay that must be used and how to optimize the subsequent processes of separation and processing of the nanoclay. Hydrotalcite was used as the adsorbent material. Direct dyes were used in this research. X-ray diffraction (XRD) patterns allowed the shape recovery of the hydrotalcite to be checked and confirmed the adsorption of the dyes. An FTIR analysis was used to check the presence of characteristic groups of the dyes in the resulting hybrids. The thermogravimetric (TGA) tests corroborated the dye adsorption and the thermal fastness improvement. Total solar reflectance (TSR) showed increased radiation protection for UV-VIS-NIR. Through the work carried out, it has been possible to establish the maximum adsorption point of hydrotalcite.

Assessment of the Proton Pump Inhibitor, Esomeprazole Magnesium Hydrate and Trihydrate, on Pathophysiological Markers of Preeclampsia in Preclinical Human Models of Disease.

Previously, we demonstrated that the proton pump inhibitor, esomeprazole magnesium hydrate (MH), could have potential as a repurposed treatment against preeclampsia, a serious obstetric condition. In this study we investigate the difference in the preclinical effectiveness between 100 µM of esomeprazole MH and its hydration isomer, esomeprazole magnesium trihydrate (MTH). Here, we found that both treatments reduced secretion of sFLT-1 (anti-angiogenic factor) from primary cytotrophoblast, but only esomeprazole MH reduced sFLT-1 secretion from primary human umbilical vein endothelial cells (assessed via ELISA). Both drugs could mitigate expression of the endothelial dysfunction markers, vascular cell adhesion molecule-1 and endothelin-1 (via qPCR). Neither esomeprazole MH nor MTH quenched cytotrophoblast reactive oxygen species production in response to sodium azide (ROS assay). Finally, using wire myography, we demonstrated that both compounds were able to induce vasodilation of human omental arteries at 100 µM. Esomeprazole is safe to use in pregnancy and a candidate treatment for preeclampsia. Using primary human tissues and cells, we validated that esomeprazole is effective in enhancing vascular relaxation, and can reduce key factors associated with preeclampsia, including sFLT-1 and endothelial dysfunction. However, esomeprazole MH was more efficacious than esomeprazole MTH in our in vitro studies.

Potential application of a hydrotalcite-like compound for reduction of toxicity to aquatic organisms via rapid and efficient removal of hydrogen sulfide.

Hydrogen sulfide (H2S) is known to have wide ranging toxicities not only as a gas but also as dissolved forms in aquatic environments. The diversity of aquatic organisms can be severely affected by hydrogen sulfide at very low concentrations, indicating the urgent necessity to develop an efficient method for removal of hydrogen sulfide in water. In this study, the removal capacity for hydrogen sulfide of our originally developed hydrotalcite-like compound composed of magnesium and iron (MF-HT) was investigated and its potential application for reduction of toxicity to aquatic organisms was evaluated. The MF-HT experimentally showed a high adsorption capacity of 146.5 mg/g with a fast adsorption equilibrium time of 45 min, both of which are top-class compared with those of other adsorbents previously reported. In fact, removal of hydrogen sulfide (1.2-152.5 mg/L) at an average rate of >97.6% was achieved in groundwater samples (n = 16) by the MF-HT within 60 min. The toxicities of groundwater, indicated by inhibition rate for microalgae (primary producers) and immobilization rate for crustaceans (secondary consumers), were reduced by 96.1% and 82.5% in 2-fold and 4-fold diluted groundwater, respectively, after treatment with the MF-HT for 60 min. These results indicate that MF-HT has an excellent safety record for aquatic organisms. After clarifying the adsorption mechanism, excellent reusability of MF-HT was also confirmed after regeneration using 1 M Na2CO3 solution. Considering the efficacy, speed, safety and cost of MF-HT, it could be a novel promising material for solving the problem of hydrogen sulfide pollution in the hydrosphere.

Clay-Catalyzed Ozonation of Hydrotalcite-Extracted Lactic Acid Potential Application for Preventing Milk Fermentation Inhibition.

An unprecedented route for mitigating the inhibitory effect of lactic acid (LA) on milk fermentation was achieved through lactate adsorption on hydrotalcite (Ht) from simulated lactate extracts. During its regeneration by ozonation, Ht displayed catalytic activity that appeared to increase by addition of montmorillonite (Mt). Changes in the pH, Zeta potential and catalyst particle size during LA ozonation were found to strongly influence LA-LA, LA-catalyst and catalyst-catalyst interactions. The latter determine lactate protonation-deprotonation and clay dispersion in aqueous media. The activity of Mt appears to involve hydrophobic adsorption of non-dissociated LA molecules on silica-rich areas at low pH, and Lewis acid-base and electrostatic interactions at higher pH than the pKa. Hydrotalcite promotes both hydrophobic interaction and anion exchange. Hydrotalcite-smectite mixture was found to enhance clay dispersion and catalytic activity. This research allowed demonstrating that natural clay minerals can act both as adsorbents for LA extract from fermentation broths and as catalysts for adsorbent regeneration. The results obtained herein provide valuable and useful findings for envisaging seed-free milk clotting in dairy technologies.

N-doped CoAl oxides from hydrotalcites with enhanced oxygen vacancies for excellent low-temperature propane oxidation.

A series of nitrogen-doped CoAlO (N-CoAlO) were constructed by a hydrothermal route combined with a controllable NH3 treatment strategy. The effects of NH3 treatment on the physico-chemical properties and oxidation activities of N-CoAlO catalysts were investigated. In comparison to CoAlO, a smallest content decrease in surface Co3+ (serving as active sites) while a largest increased amount of surface Co2+ (contributing to oxygen species) are obtained over N-CoAlO/4h among the N-CoAlO catalysts. Meanwhile, a maximum N doping is found over N-CoAlO/4h. As a result, N-CoAlO/4h (under NH3 treatment at 400°C for 4 hr) with rich oxygen vacancies shows optimal catalytic activity, with a T90 (the temperature required to reach a 90% conversion of propane) at 266°C. The more oxygen vacancies are caused by the co-operative effects of N doping and suitable reduction of Co3+ for N-CoAlO/4h, leading to an enhanced oxygen mobility, which in turn promotes C3H8 total oxidation activity dominated by Langmuir-Hinshelwood mechanism. Moreover, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTs) analysis shows that N doping facilities the decomposition of intermediate species (propylene and formate) into CO2 over the catalyst surface of N-CoAlO/4h more easily. Our reported design in this work will provide a promising way to develop abundant oxygen vacancies of Co-based catalysts derived from hydrotalcites by a simple NH3 treatment.

Cooperative Chemotaxis of Magnesium Microswimmers for Corrosion Spotting.

Numerous artificial micro- and nanomotors, as well as various swimmers have been inspired by living organisms that are able to move in a coordinated manner. Their cooperation has also gained a lot of attention because the resulting clusters are able to adapt to changes in their environment and to perform complex tasks. However, mimicking such a collective behavior remains a challenge. In the present work, magnesium microparticles are used as chemotactic swimmers with pronounced collective features, allowing the gradual formation of macroscopic agglomerates. The formed clusters act like a single swimmer able to follow pH gradients. This dynamic behavior can be used to spot localized corrosion events in a straightforward way. The autonomous docking of the swimmers to the corrosion site leads to the formation of a local protection layer, thus increasing corrosion resistance and triggering partial self-healing.

Carbonation, Cementation, and Stabilization of Ultramafic Mine Tailings.

Tailings dam failures can cause devastation to the environment, loss of human life, and require expensive remediation. A promising approach for de-risking brucite-bearing ultramafic tailings is in situ cementation via carbon dioxide (CO2) mineralization, which also sequesters this greenhouse gas within carbonate minerals. In cylindrical test experiments, brucite [Mg(OH)2] carbonation was accelerated by coupling organic and inorganic carbon cycling. Waste organics generated CO2 concentrations similar to that of flue gas (up to 19%). The abundance of brucite (2-10 wt %) had the greatest influence on tailings cementation as evidenced by the increase in total inorganic carbon (TIC; +0.17-0.84%). Brucite consumption ranged from 64-84% of its initial abundance and was mainly influenced by water availability. Higher moisture contents (e.g., 80% saturation) and finer grain sizes (e.g., clay-silt) that allowed for a better distribution of water resulted in greater brucite carbonation. Furthermore, pore clogging and surface passivation by Mg-carbonates may have slowed brucite carbonation over the 10 weeks. Unconfined compressive strengths ranged from 0.4-6.9 MPa and would be sufficient in most scenarios to adequately stabilize tailings. Our study demonstrates the potential for stabilizing brucite-bearing mine tailings through in situ cementation while sequestering CO2.

Zn Promoted Mg-Al Mixed Oxides-Supported Gold Nanoclusters for Direct Oxidative Esterification of Aldehyde to Ester.

The synthesis of ester compounds is one of the most important chemical processes. In this work, Zn-Mg-Al mixed oxides with different Zn2+/Mg2+ molar ratios were prepared via co-precipitation method and supported gold nanoclusters to study the direct oxidative esterification of aldehyde and alcohol in the presence of molecular oxygen. Various characterization techniques such as N2-physical adsorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and CO2 temperature programmed desorption (TPD) were utilized to analyze the structural and electronic properties. Based on the results, the presence of small amounts of Zn2+ ions (~5 wt.%) provoked a remarkable modification of the binary Mg-Al system, which enhanced the interaction between gold with the support and reduced the particle size of gold. For oxidative esterification reaction, the Au25/Zn0.05MgAl-400 catalyst showed the best performance, with the highest turnover frequency (TOF) of 1933 h-1. The active center was believed to be located at the interface between metallic gold with the support, where basic sites contribute a lot to transformation of the substrate.

Synthesis, characterization, CO2 mineralization in air, and thermal decomposition of nano- C8H10MgO10·4H2O powder.

Effective solutions for efficient carbon dioxide (CO2) capture in air at room temperature are in high demand due to the major impacts CO2 has on global climatic changes. Solid adsorbents materials for CO2 capture received great attention over the past years, among them, magnesium-based sorbents have been identified as a promising solution for CO2 capture at intermediate temperatures. This study reports for the first time (1) the synthesis of monoclinic magnesium malate tetrahydrate by combining electrospinning and aging processes, and (2) its room temperature CO2 adsorption and mineralization in air. Commercial magnesium hydroxide (Mg(OH)2) powder was used as raw material in the synthesis of magnesium carbonate hydrates (MCH), by three processes; (1) direct calcination, (2) electrospinning and calcination, and (3) electrospinning, calcination, and aging (at room temperature and in air to incubate CO2 mineralization). The synthesized powder samples were characterized thoroughly using XRD, SEM, EDS, and TGA analyses. Effects of calcination temperature/aging time on CO2 adsorption (at room temperature), crystallization, and mineralization of MCH were studied. Interestingly, the results showed that the 6-month aged samples (via the third synthesis process above), recorded a CO2 adsorption capacity of 15.5 wt% within 90 min at 30 °C. Subsequently, three novel mechanisms of thermal decomposition CO2 adsorption/mineralization were proposed, and a theoretical upper limit of carbon saving potentials was estimated, i.e., 8 mol CO2 per 1 mol MgO. This work provides a novel CO2 mineralization approach that results in (1) effective and practical solutions of carbon dioxide (CO2) emission management and which holds (2) great potential for novel carbon-based fuels development.

Recent progress in the synthesis of Layered Double Hydroxides and their application for the adsorptive removal of dyes: A review.

Layered double hydroxides (LDHs), also known as anionic clays, are lamellar inorganic solids with a brucite-like structure and consist of positively charged metal hydroxide sheets intercalated by anions and water molecules. Choice of LDH is beneficial as it displays properties like simple synthesis procedures, adjustable structure, stability, large surface area, homogeneous positive charge distribution over the surface, interplanar spacing, and versatility to synthesize a variety of composites. Due to these properties LDHs act as efficient adsorbents for wastewater treatment. This review presents a detailed overview of the removal of hazardous organic dyes using different LDHs and LDH-hybrids/composites. The review also incorporates methods of synthesis of various LDHs and composites and the effect of their morphology on dye removal capacity. The effects of adsorption variables such as pH, adsorbent dosage, initial concentration of dye, contact time on the adsorption of these materials are also explained along with adsorption isotherms, kinetics and operative mechanisms. This article incorporates 156 references, majority of which have been taken from the available literature of last 5 years.