Premature gray hair development in the interbrow region owing to the loss of maxillary first molars in young mice.

The exact sites of premature hair graying and whether tooth loss causes this condition remain unknown. In this study, we aimed to explore the effect of reduced mastication on premature hair graying. Maxillary first molars were extracted from young mice, and the mice were observed for 3 months, along with non-extraction control group mice. After 3 months, gray hair emerged in the interbrow region of mice in the tooth extraction group but not in the control group. The expression of tyrosinase-related protein-2 (TRP-2) mRNA was lower in the interbrow tissues of young mice without maxillary molars than in those with maxillary molars. Tooth loss leads to interbrow gray hair growth, possibly because of weakened trigeminal nerve input, suggesting that reduced mastication causes premature graying. Thus, prompt prosthetic treatment after molar loss is highly recommended.

A 3.8-million-year-old hominin cranium from Woranso-Mille, Ethiopia.

The cranial morphology of the earliest known hominins in the genus Australopithecus remains unclear. The oldest species in this genus (Australopithecus anamensis, specimens of which have been dated to 4.2-3.9 million years ago) is known primarily from jaws and teeth, whereas younger species (dated to 3.5-2.0 million years ago) are typically represented by multiple skulls. Here we describe a nearly complete hominin cranium from Woranso-Mille (Ethiopia) that we date to 3.8 million years ago. We assign this cranium to A. anamensis on the basis of the taxonomically and phylogenetically informative morphology of the canine, maxilla and temporal bone. This specimen thus provides the first glimpse of the entire craniofacial morphology of the earliest known members of the genus Australopithecus. We further demonstrate that A. anamensis and Australopithecus afarensis differ more than previously recognized and that these two species overlapped for at least 100,000 years-contradicting the widely accepted hypothesis of anagenesis.

Functional analysis of a bitter gustatory receptor highly expressed in the larval maxillary galea of Helicoverpa armigera.

Many plant secondary substances are feeding deterrents for insects and play a key role in the selection of host plants. The taste sensilla of phytophagous insects contain gustatory sensory neurons sensitive to deterrents but the molecular basis of deterrent chemoreception remains unknown. We investigated the function of Gr180, the most highly expressed bitter gustatory receptor in the maxillary galea of Helicoverpa armigera larvae. Functional analyses using the Xenopus oocyte expression system and two-electrode voltage clamp revealed that the oocytes expressing Gr180 responded to coumarin. Tip recording results showed that the medial sensilla styloconica of the maxilla of fifth instar larvae exhibited electrophysiological responses to coumarin. Two-choice feeding bioassays confirmed that coumarin inhibited larval feeding. A homozygous mutant strain of H. armigera with truncated Gr180 proteins (Gr180-/-) was established using the CRISPR-Cas9 system. The responses of the medial sensilla styloconica in Gr180-/- to coumarin were almost abolished, and the responses to sinigrin and strychnine were also significantly decreased. Knockout of Gr180 alleviated the feeding deterrent effects of coumarin, sinigrin, and strychnine. Thus, we conclude that Gr180 is a receptor responding to coumarin,and also participates in sensing sinigrin and strychnine. These results enhance our understanding of the gustatory sensing mechanisms of phytophagous insects to deterrents.

DLX gene expression in the developing chick pharyngeal arches and relationship to endothelin signaling and avian jaw patterning.

BACKGROUND: A hinged jaw that articulates with the skull base is a striking feature of the vertebrate head and has been greatly modified between, and within, vertebrate classes. Genes belonging to the DLX homeobox family are conserved mediators of local signaling pathways that distinguish the dorsal and ventral aspects of the first pharyngeal arch. Specifically, a subset of DLX genes are expressed in the cranial neural crest-derived mandibular ectomesenchyme in response to ventral endothelin signaling, an important step that confers the first arch with maxillary and mandibular identities. Downstream targets of DLX genes then execute the morphogenetic processes that lead to functional jaws. Identifying lineage-specific variations in DLX gene expression and the regulatory networks downstream of DLX action is necessary to understand how different kinds of jaws evolved. RESULTS: Here, we describe and compare the expression of all six DLX genes in the chick pharyngeal arches, focusing on the period of active patterning in the first arch. Disruption of endothelin signaling results in the down-regulation of ventral-specific DLX genes and confirms their functional role in avian jaw patterning. CONCLUSIONS: This expression resource will be important for comparative embryology and for identifying synexpression groups of DLX-regulated genes in the chick.

GATA3 is essential for separating patterning domains during facial morphogenesis.

Neural crest cells (NCCs) within the mandibular and maxillary prominences of the first pharyngeal arch are initially competent to respond to signals from either region. However, mechanisms that are only partially understood establish developmental tissue boundaries to ensure spatially correct patterning. In the 'hinge and caps' model of facial development, signals from both ventral prominences (the caps) pattern the adjacent tissues whereas the intervening region, referred to as the maxillomandibular junction (the hinge), maintains separation of the mandibular and maxillary domains. One cap signal is GATA3, a member of the GATA family of zinc-finger transcription factors with a distinct expression pattern in the ventral-most part of the mandibular and maxillary portions of the first arch. Here, we show that disruption of Gata3 in mouse embryos leads to craniofacial microsomia and syngnathia (bony fusion of the upper and lower jaws) that results from changes in BMP4 and FGF8 gene regulatory networks within NCCs near the maxillomandibular junction. GATA3 is thus a crucial component in establishing the network of factors that functionally separate the upper and lower jaws during development.

What is missing from the sturgeon jaw: Developmental morphology of the upper jaw in Acipenser.

Sturgeons belong to the family Acipenseridae, the most species-rich extant family of Acipenseriformes, a basal actinopterygian group of key importance in assessing the early radiations of the actinopterygians. At the same time, acipenseriforms display unique specializations in the morphology of the snout and jaws which make them a valuable model for studying evolutionary novelties. However, despite a long history of research, the homologies of the snout and the mandibular arch of acipenseriforms remain uncertain preventing further studies on the evolutionary origin of their unique snout and jaw structure, and in particular, of the upper jaw symphysis, the key apomorphy of the group and the preoral snout. In the present study, a detailed description of the upper jaw morphology and development in sturgeons is provided in order to address its composition in terms of the common actinopterygian archetype. Based on the obtained results, the upper jaw of acipenseriforms is assumed to have lost the autopalatine portion, which most likely is represented by the separate cartilages supporting the tentacles. Also, the conventional interpretation of the sturgeon's maxilla as dermopalatine is rejected on the grounds of this bone structure and development. Paedomorphosis is proposed to be the most likely mechanism explaining the evolutionary origin of the upper jaw symphysis and supposed modifications of the snout in sturgeons.

Maxillary morphology of chimpanzees: Captive versus wild environments.

Morphological studies typically avoid using osteological samples that derive from captive animals because it is assumed that their morphology is not representative of wild populations. Rearing environments indeed differ between wild and captive individuals. For example, mechanical properties of the diets provided to captive animals can be drastically different from the food present in their natural habitats, which could impact cranial morphology and dental health. Here, we examine morphological differences in the maxillae of wild versus captive chimpanzees (Pan troglodytes) given the prominence of this species in comparative samples used in human evolution research and the key role of the maxilla in such studies. Size and shape were analysed using three-dimensional geometric morphometric methods based on computed tomography scans of 94 wild and 30 captive specimens. Captive individuals have on average larger and more asymmetrical maxillae than wild chimpanzees, and significant differences are present in their maxillary shapes. A large proportion of these shape differences are attributable to static allometry, but wild and captive specimens still differ significantly from each other after allometric size adjustment of the shape data. Levels of shape variation are higher in the captive group, while the degree of size variation is likely similar in our two samples. Results are discussed in the context of ontogenetic growth trajectories, changes in dietary texture, an altered social environment, and generational differences. Additionally, sample simulations show that size and shape differences between chimpanzees and bonobos (Pan paniscus) are exaggerated when part of the wild sample is replaced with captive chimpanzees. Overall, this study confirms that maxillae of captive chimpanzees should not be included in morphological or taxonomic analyses when the objective is to characterise the species.

Metric evaluation of the anterior nasal spine to estimate sex and population group in South African individuals.

INTRODUCTION: The anterior nasal spine is a pointed, midline projection of the maxilla. This bony structure dictates the overlying soft tissues providing the phenotypic features of the nose and upper lip and determines the differences in the mid-face morphology. Little data is available on the metric features of the Anterior nasal spine (ANS). This study aimed to perform metric evaluations of the ANS of white and black South African males and females to ascertain if morphological variations exist and if the differences are viable for the use in sex and population identification. MATERIALS AND METHODS: The sample included 100 CBCT images for each population and sex group. Linear and angular measurements of the ANS were recorded in both the sagittal and axial planes. RESULTS: Classification decision trees (pruned) were fitted to ascertain the relationship between population group, sex and the ANS measurements including and excluding age. For population group, all the ANS measurements were statistically significant for females but in males, all the ANS measurements were significant when performed individually. However, when fitted to the classification tree, Sagittal 2 did not show any statistical significance. When considering sex, only 2 of the ANS measurements (Sagittal 2 and Axial 1) were found to be significant. The results did not differ significantly when comparing the decision trees including and excluding age. CONCLUSIONS: White South African individuals presented with a longer ANS that produced a more acute angle whereas black South African individuals presented with a shorter ANS and a more obtuse angle. Additionally, males presented with a longer ANS compared to females. ANS measurements were found to be more relevant for population discernment than for sex.

Variability in human tooth cementum thickness reflecting functional processes.

OBJECTIVE: The aim of this study was to investigate the thickness of acellular extrinsic fibre cementum (AEFC) at four root positions of anterior and posterior teeth with special focus on functional aspects. Furthermore, the correlations between cementum thickness and chronological age and sex are investigated. BACKGROUND: While numerous studies confirm continuous cementum apposition with age, masticatory forces as well as physiological and orthodontically induced tooth movements also have the potential to affect tooth cementum thickness. MATERIALS AND METHODS: Undecalcified teeth were embedded in resin and transverse-sectioned in the cervical third of the root. Two sections per root were selected, and digital images at four positions were obtained (mesial, distal, oral, and vestibular) using light microscopy. The AEFC thickness of 99 teeth (anterior = 66, posterior = 33, male = 54, female = 45) were measured in both sections. The differences in mean values between root positions and the association of root position variation with tooth type, age, sex, and subject as well as the overall effects of age and sex were analysed using a mixed model. RESULTS: First incisors and canines showed the greatest mean AFEC thickness, in contrast to premolars which had the lowest values. Differences were found across the four root positions, with a pattern varying considerably between anterior and posterior teeth and between maxilla and mandible in the anterior teeth. An interaction between root position and subject pointed to the existence of an individual component in the variation of AEFC thickness across the four root positions. There was an age trend with an almost linear increase in cementum thickness of 1 µm per year. Overall, females tended to exhibit a significantly lesser AEFC thickness compared to males. CONCLUSIONS: Distinct differences in the pattern of thickness values across the four root positions in anterior and posterior teeth support the assumption that the AEFC is strongly affected by functional processes. In addition to sex-specific differences and age-related trends, the root position variation of AEFC thickness varies from individual to individual.

Effectiveness of intraoral stents in reducing oral adverse events during radiotherapy for maxillary or nasal cavity malignant tumors.

PURPOSE: Many patients experience oral adverse events during head and neck cancer radiotherapy (RT). The methods of management of such events are under debate. One such technique is the intraoral stent (IOS) technique, which removes normal tissue from the irradiation field. This retrospective study examined the factors associated with the occurrence of oral mucositis (OM) and dysgeusia and the efficacy of IOSs in preventing them. METHODS: Twenty-nine patients who underwent RT in the maxilla or nasal cavity between 2016 and 2022 were included. They were investigated for background characteristics, treatment factors (IOS and dose-volume histogram), and oral adverse events (OM and dysgeusia). RESULTS: Significant risk factors for the incidence of grade ≥ 2 (Common Terminology Criteria for Adverse Events v5.0) OM were the non-use of IOSs (p = 0.004) and diabetes (p = 0.025). A significant risk factor for the incidence of grade ≥ 1 dysgeusia was concomitant chemotherapy (p = 0.019). The radiation dose to the tongue was significantly lower in the IOS group than in the non-IOS group. CONCLUSION: Our findings suggest that the use of an IOS during RT reduces the severity of OM by reducing irradiation to the tongue. Therefore, the use of an IOS is recommended during RT performed in the maxilla or nasal cavity.

Randomized controlled multi-centre study comparing shorter dental implants (6 mm) to longer dental implants (11-15 mm) in combination with sinus floor elevation procedures: 10-year data.

AIM: To compare implant survival and complication rates between shorter and standard-length implants with sinus augmentation and restored with single crowns, at 10 years of loading. MATERIALS AND METHODS: One-hundred and one patients (137 implants) with a ridge height of 5-7 mm in the posterior maxilla were randomly assigned to two treatment modalities: shorter implants (6 mm) (group short [GS]) or standard-length implants (11-15 mm) with sinus grafting (group graft [GG]). Following the insertion of final restorations, patients were regularly recalled for up to 10 years. Assessed outcomes encompassed implant survival, marginal bone levels (MBLs), biological and technical parameters and patient-reported outcome measures (OHIP-49 = Oral Health Impact Profile). Non-parametric statistical analysis was used to analyse the data. RESULTS: For the 5- to 10-year follow-up period, 77 patients with 105 implants (GS: 36 patients/48 implants; GG: 41/57) were available for re-examination (drop-out rate 21%). Implant survival rates at the patient level were 96.0% (GS; 2 failures) and 100% (GG) (inter-group p = .24). Median MBLs amounted to 0.00 mm (min 0.00; max 3.25; GS) and 0.00 mm (min 0.00; max 4.55; GG) (inter-group p = .73). Technical complications predominantly occurred within the first 5 years (inter-group p > .05). Peri-implantitis rates were 4.2% (GS) and 13.3% (GG) (intergroup p = .37). Median OHIP-49 scores were 7.00 (0.00; 39.00; GS) and 9.00 (0.00; 196; GG) (inter-group p = .61) at 10 years. CONCLUSIONS: Based on similar 10-year implant survival rates, reduced patient morbidity and lower costs, the use of shorter dental implants might well serve as an alternative treatment concept to longer implants placed in conjunction with sinus grafting for patients with a limited ridge height in the posterior maxilla. Study register: https://clinicaltrials.gov/ct2/show/NCT01030523.

Immediate implant placement with immediate or delayed provisionalization in the maxillary aesthetic zone: A 10-year randomized trial.

AIM: To compare the marginal bone level of immediately placed implants, with either immediate or delayed provisionalization (IP or DP), in the maxillary aesthetic zone after 10 years of function. MATERIALS AND METHODS: Participants with a failing tooth in the maxillary aesthetic zone were randomly assigned to immediate implant placement with either IP (n = 20) or DP (n = 20) after primary wound closure with a free gingival graft. The final restoration was placed 3 months after provisionalization. The primary outcome was change in marginal bone level. In addition, implant survival, restoration survival and success, peri-implant tissue health, mucosa levels, aesthetic indices, buccal bone thickness and patient satisfaction were evaluated. RESULTS: After 10 years, the mean mesial and distal changes in marginal bone level were -0.47 ± 0.45 mm and -0.49 ± 0.52 mm in the IP group and -0.58 ± 0.76 mm and -0.41 ± 0.72 mm in the DP group (p = .61; p = .71). The survival rate was 100% for the implants; for the restorations, it was 88.9% in the IP group and 87.5% in the DP group. Restoration success, according to modified USPHS criteria, was 77.8% in the IP group and 75.0% in the DP group. The prevalence of peri-implant mucositis was 38.9% and 35.7% and of peri-implantitis 0.0% and 6.3%, respectively, in the IP group and DP group (p = 1.0; p = .40). The Pink Esthetic Score and White Esthetic Score was 15.28 ± 2.32 in the IP group and 14.64 ± 2.74 in the DP group, both clinically acceptable (p = .48). The buccal bone thickness was lower in the DP group. Patient satisfaction was similar in both groups (p = .75). CONCLUSIONS: The mean marginal bone level changes after immediate implant placement with IP were similar to those after immediate placement with DP. CLINICAL TRIAL REGISTRATION: Registered in the National Trial Register (NL9340).

Single immediate implant placement in the maxillary aesthetic zone with and without connective tissue grafting: Results of a 5-year randomized controlled trial.

AIM: To assess the 5-year effects of grafting connective tissue while undertaking single immediate implant placement and provisionalization at the mid-buccal mucosa level (MBML). Secondary outcomes were buccal bone wall thickness (BBT), marginal bone level (MBL) and patient satisfaction. MATERIALS AND METHODS: Sixty patients with a single failing tooth in the maxillary anterior region were provided with an immediately placed and provisionalized implant. At implant placement, the patients randomly received either a connective tissue graft from the maxillary tuberosity (n = 30, test group) or no graft (n = 30, control group). The alveolar socket classification was mainly Type 2A. Data were collected before removing the failing tooth (T0 ), and at 1 (T1 ), 12 (T12 ) and 60 (T60 ) months after final crown placement. The primary outcome was the change in MBML compared with the pre-operative situation. Additionally, the change in BBT, MBL, aesthetics (using the Pink Aesthetic Score-White Aesthetic Score), soft-tissue peri-implant parameters and patient satisfaction were assessed. RESULTS: At the 5-year follow-up, 27 patients could be analysed from each group. In each group, one implant was lost during the osseointegration period, within 3 months of placement, resulting in an implant survival rate of 96.7% in both groups. MBML change at T60 was -0.6 (-1.1 to -0.1) mm in the control group and 0.1 (-0.4 to 0.5) mm in the test group (p = .008). BBT and MBL, aesthetics, soft-tissue peri-implant parameters and patient satisfaction showed stable results and satisfied patients, without clinically relevant differences between the groups. CONCLUSIONS: This 5-year follow-up study shows that grafting connective tissue when replacing a single failing tooth with immediately placed and provisionalized implant results in favourable peri-implant tissues and fewer MBML changes.

Clinical outcomes and risk factor analysis of dental implants inserted with lateral maxillary sinus floor augmentation: A 3- to 8-year retrospective study.

AIM: To evaluate the 3- to 8-year outcomes of dental implants placed with lateral sinus floor augmentation (LSFA) and to identify factors affecting implant survival. MATERIALS AND METHODS: This retrospective study was performed by screening all implants placed with LSFA procedures, which were conducted between January 2012 and December 2016. Subantral bone gain (SABG) and apical bone height (ABH) were assessed using panoramic radiographs. The cumulative survival rate of implants was analysed using life-table analysis and Kaplan-Meier survival curves. The influential risk factors affecting survival were assessed using univariate log-rank tests and multivariable mixture cure rate model. Implant complications were recorded. RESULTS: Based on the established criteria, a total of 449 patients (760 implants) were included in this study. In the 3- to 8-year follow-up (mean ± SD, 5.81 ± 1.33 years), 15 implants in 14 patients failed, with a CRS of 96.81% on an implant basis and 95.07% on a patient basis. A history of periodontitis and poor compliance with supportive periodontal treatment was associated with a significantly higher risk of implant failure at both implant and patient levels. Significant decreases in ABH occurred during each yearly interval except for 3 years. A similar trend has been observed for SABG at 1, 2, 6 and 8 years. The total complication rate was 31.84% on implant basis, with peri-implant mucositis (21.58%) being the most frequent biologic complication and porcelain cracking (5.00%) being the most common technical complication. CONCLUSIONS: Implant with LSFA is a reliable treatment option in atrophic maxilla. A history of periodontitis without regular supportive periodontal treatment was identified as a predictor for implant failure. Slight but significant shrinkage of vertically augmented bone can be observed after implant placement.

Single crowns in the posterior maxilla supported by either 11-mm long implants with sinus floor augmentation or by 6-mm long implants: A 10-year randomized controlled trial.

OBJECTIVES: To compare the clinical performance of single crowns in the posterior maxilla supported by either 11-mm long implants combined with maxillary sinus floor augmentation (MSFA) surgery or by 6-mm long implants during a 10-year follow-up period. MATERIALS AND METHODS: Subjects were randomly allocated to receive one 11-mm long implant in combination MFSA or to receive one 6-mm long implant without any grafting. Twenty-one implants in 20 patients were placed in the 6-mm group and 20 implants in 18 patients were placed in the 11-mm group. Both groups were followed by clinical and radiographic examinations up to 10 years. Patients' satisfaction was also scored before treatment. RESULTS: Two patients died and eight patients moved during the follow-up. Two patients lost an implant in the 6-mm group and one implant was lost in the 11-mm group (implant survival 89.5% and 90.9%, respectively). From loading to 10 years' follow-up, mean ± SE marginal bone loss in the 6-mm group and 11-mm group was 0.18 ± 0.10 mm and 0.26 ± 0.12 mm, respectively, without a significant difference between the groups at 10 years (p = .650). In both groups, indices scores for plaque, calculus, gingiva and bleeding were low as well as mean pocket probing depth. Patients' satisfaction at 10 years was high in both groups; mean overall satisfaction in the 6-mm group and 11-mm group was 9.6 ± 0.6 and 9.2 ± 0.8, respectively (p = .168). CONCLUSIONS: Placement of 6-mm implants or 11-mm implants combined MFSA are equally successful during a 10-year follow-up period when applied for supporting a single restoration.

A randomized clinical trial on zirconia versus titanium implants in maxillary single tooth replacement.

OBJECTIVES: This RCT aimed to compare zirconia and titanium dental implants in the maxillary premolar region. The comparison was based on marginal bone level (MBL) changes, clinical parameters, aesthetic outcomes, and patient related outcome measures (PROMs) 1 year after prosthetic loading. MATERIALS AND METHODS: Fifty patients were randomly assigned to receive either a zirconia (ZrO2, n = 25) implant or a titanium (Ti, n = 25) bone-level implant. Implants were provided with a lithium disilicate crown 3 months after placement. Follow-up was at 1 month and after 1 year. The primary outcome pertained to changes in MBL. Reported secondary outcomes consisted of implant survival, peri-implant tissue health, aesthetics, and PROMs. RESULTS: Mean MBL change after 1 year was 0.01 mm (SD = 0.45; min = 0.72, max = 0.86) for ZrO2 and -0.09 mm (SD = 0.34; min = 0.53, max = -1.06) for Ti (p = .439). Scores for the other clinical outcome parameters and PROMs were generally favorable, with no significant differences. However, significant differences were found for the aesthetic outcomes regarding two criteria: (a) level of facial mucosa (p = .022), in favor of Ti, and (b) root convexity/soft tissue color and texture (p = .005) in favor of ZrO2. CONCLUSION AND CLINICAL IMPLICATIONS: The ZrO2 and Ti implant types used in this study, replacing a single missing maxillary premolar, show a comparable outcome in terms of MBL change after 1 year. Clinical and aesthetic parameters, as well as PROMs, are favorable and similar between both implant types after 1 year of prosthetic loading. These short-term study results suggest that both are suitable for clinical use.

Effect of intraoral administration of parathyroid hormone on osseous and soft tissue healing around implants in ovariectomized rat maxillae.

OBJECTIVES: Intermittent administration of parathyroid hormone (PTH) increases systemic bone mass. However, the effect of PTH on osseous and soft tissue healing around implants in osteoporosis patients remains unclear. This study aimed to investigate the effects of PTH on tissue healing around implants in ovariectomized rats and to compare systemic and intraoral administration routes. MATERIAL AND METHODS: Implants were placed at the healed sites of ovariectomized rats 3 weeks after maxillary first molar extraction. Rats were randomly divided into two groups that received either daily systemic subcutaneous or local intraoral PTH administration. Maxillae were dissected to examine bone architectures with micro-computed tomography images. Histomorphometric and immunohistochemical analyses were performed to evaluate osseous and soft tissue healing around the implants. RESULTS: Regardless of the administration route, PTH significantly increased bone area and the numbers of osteoblasts, osteoclasts, and osteocytes in the first and second inside and outside areas of implant threads, in addition to decreasing the number of sclerostin+ osteocytes. However, the intraoral PTH administration route was superior to the systemic route by significantly improving bone quality and promoting collagen production in the connective tissue around implants. CONCLUSIONS: Parathyroid hormone administration promoted both osseous and soft tissue healing around implants, irrespective of administration route. Interestingly, intraoral administration improved the evaluated parameters more than systemic administration. Thus, the intraoral route could become a useful treatment strategy for implant treatment in osteoporosis patients.

Hard and soft tissue alterations using dual-zone concept versus connective tissue graft at maxillary immediate implant placement: A 1-year randomized clinical and volumetric trial.

OBJECTIVES: To evaluate the esthetic outcome, as well as clinical, radiographic, and volumetric tissue alterations 1 year after immediate implant placement (IIP) with connective tissue grafting (CTG) versus dual-zone concept (DZ) at sites with thin labial bone in the esthetic zone. MATERIALS AND METHODS: This randomized clinical trial included 30 patients treated with IIP simultaneous with either CTG or DZ (n = 15 each). Pink esthetic score (PES) was assessed 6 months after crown placement as the primary outcome. Amount of bone labial to the implant, labio-palatal ridge reduction, and crestal bone changes were measured via CBCT after 1 year. Volumetric analysis of linear labial soft tissue contour, interdental, and mid-facial soft tissue level changes, and total volume loss (mm3) were measured after 1 year. RESULTS: Similar PES was observed in the CTG (12.53 ± 1.13) and DZ (12.13 ± 1.55) groups, with no significant difference (p = 0.42). Likewise, there were no statistically significant differences found between the two groups in labio-palatal bone reduction (mm&%), interdental papillae, and mid-facial gingival levels (p > 0.05). However, the mean vertical crestal bone changes in the CTG and DZ groups were -1.1 ± 0.6 mm and 0.2 ± 1.0 mm, respectively, with a statistically significant difference (p = 0.0002). Moreover, CTG revealed less linear and total volume (mm3) loss in the labial soft tissue which was statistically significant compared to DZ (p = 0.007). CONCLUSION: Both groups demonstrated the same PES, nevertheless, volumetric analysis revealed twice total labial volume loss in DZ compared to CTG. It might be concluded that the use of CTG with IIP caused less horizontal reduction in the supra-implant complex compared to the DZ.

Maxillary bone augmentation with calvarial bone graft for immediate full-arch rehabilitation: Insights from a 10-year proof-of-concept retrospective analysis.

OBJECTIVE: Evaluate the long-term outcomes of full-arch rehabilitation using immediate dental implant placement and continuous functional loading with full-fixed dental prostheses (FFDPs). MATERIALS AND METHODS: Fifty-six patients received temporary implants (n = 327) at maxillary augmentation with calvarial bone. A provisional acrylic FFDP was immediately loaded onto these implants. After 6 months, the temporary implants were replaced with definitive implants (n = 326) and immediately loaded with a second provisional FFDP (N = 55). Subsequently, a baseline radiograph was taken following a 6-month healing period. The second bridge was then substituted with a definitive FFDP. Primary outcomes included peri-implant marginal bone level (MBL) and definitive implant survival. Secondary outcomes evaluated provisional implant and prostheses survival, complications, and patient satisfaction. RESULTS: The provisional implants had a survival rate of 97.9%. One patient was excluded from further analysis due to loss of temporary implants and first FFDP. The definitive implant survival rate after 10 years was 92.2%, with a moderate but significant decrease in MBL between baseline radiography and 10 years later (-0.08 ± 0.18 vs. -0.24 ± 0.44). However, large individual variations were observed, with 65.8% of implants showing no bone loss and 9.2% showing loss ≥0.5 mm. Sinusitis was experienced by 14.3% of patients upon surgery. Patient satisfaction was high or reported no issues after protocol completion (80%). One patient lost all six definitive implants and definitive FFDP 8.2 years after implant placement. CONCLUSIONS: The described protocol can be regarded as a long-term, highly successful method for full-arch rehabilitation of atrophied maxillae while enabling continuous masticatory and speaking functionality.

Accuracy of open-sleeved vs. closed-sleeved static computer-assisted implant systems in immediate maxillary molar implant placement: An in vitro study.

OBJECTIVES: The objective of this study is (1) to compare the accuracy of an open-sleeved static computer-assisted implant system (sCAIS) with a closed-sleeve sCAIS and free-hand approach in immediate implant placement (IIP) of maxillary molar sites and (2) to investigate the influence of socket morphology on these approaches. MATERIALS AND METHODS: Ninety partially edentulous duplicated maxillary models simulating three different molar sockets (type A, B, and C based on Smith and Tarnow's classification) were investigated. Three modalities, including sCAIS with open-sleeves, sCAIS with closed-sleeves, and free-hand approach, were applied separately to 30 models with 120 sockets. A customized Python script automatically measured the deviations between the virtual and actual implant positions for all 360 implants. RESULTS: The 3D deviations of sCAIS were significantly influenced by the socket and sleeve types. Both guided groups exhibited significantly less deviation than the free-hand approach. Type A and C sockets resulted in better implant positions than type B socket sites. In type B sockets, the open-sleeve group achieved significantly less deviation compared to the closed-sleeve group, with respect to apical global (1.34 ± 0.53 vs. 1.84 ± 0.59 mm), coronal horizontal (0.68 ± 0.36 vs. 0.93 ± 0.34 mm), apical horizontal (1.21 ± 0.59 vs. 1.74 ± 0.63 mm), and angular (3.30 ± 1.41 vs. 4.41 ± 1.96°) deviations. CONCLUSIONS: Guided implant surgery significantly reduces deviations during molar IIP compared to free-hand procedures. Furthermore, the use of open-sleeve sCAIS appears to be more effective in minimizing deviations in type B sockets when compared with the closed-sleeve guided system.