Poly(Lactide-Co-Glycolide)-Monomethoxy-Poly-(Polyethylene Glycol) Nanoparticles Loaded with Melatonin Protect Adipose-Derived Stem Cells Transplanted in Infarcted Heart Tissue.

Stem cell transplantation is a promising therapeutic strategy for myocardial infarction. However, transplanted cells face low survival rates due to oxidative stress and the inflammatory microenvironment in ischemic heart tissue. Melatonin has been used as a powerful endogenous antioxidant to protect cells from oxidative injury. However, melatonin cannot play a long-lasting effect against the hostile microenvironment. Nano drug delivery carriers have the ability to protect the loaded drug from degradation in physiological environments in a controlled manner, which results in longer effects and decreased side effects. Therefore, we constructed poly(lactide-co-glycolide)-monomethoxy-poly-(polyethylene glycol) (PLGA-mPEG) nanoparticles to encapsulate melatonin. We tested whether the protective effect of melatonin encapsulated by PLGA-mPEG nanoparticles (melatonin nanoparticles [Mel-NPs]) on adipose-derived mesenchymal stem cells (ADSCs) was enhanced compared to that of free melatonin both in vitro and in vivo. In the in vitro study, we found that Mel-NPs reduced formation of the p53- cyclophilin D complex, prevented mitochondrial permeability transition pores from opening, and rescued ADSCs from hypoxia/reoxygenation injury. Moreover, Mel-NPs can achieve higher ADSC survival rates than free melatonin in rat myocardial infarction areas, and the therapeutic effects of ADSCs pretreated with Mel-NPs were more apparent. Hence, the combination of Mel-NPs and stem cell transplantation may be a promising strategy for myocardial infarction therapy. Stem Cells 2018;36:540-550.

A novel, cell-permeable, collagen-based membrane promotes fibroblast migration.

BACKGROUND AND OBJECTIVE: Growth factors are frequently incorporated into scaffolds to promote periodontal regeneration but many currently used scaffolds do not encourage cell migration towards the dentogingival junction. We examined the proliferation and migration of human gingival fibroblasts in a novel, physically robust, collagen-Vicryl™ membrane loaded with fibronectin (FN) and/or insulin-like growth factor (IGF-I). Biocompatibility of the membranes was evaluated in rat dorsal skin. MATERIAL AND METHODS: Chemotaxis was examined in Boyden chambers and cell migration by confocal imaging of membranes, which were fabricated from rat tail type I collagen with embedded Vicryl knitted mesh, IGF-I (50, 100 ng/mL) and FN (10 µg/mL). Membranes (Vicryl alone, collagen+Vicryl, collagen+Vicryl+IGF-I, collagen+Vicryl+FN') were implanted subcutaneously in 8 rats and were evaluated by histomorphometry after 7 and 14 days. RESULTS: IGF-I (50 or 100 ng/mL) promoted chemotaxis compared with vehicle controls (P = .02, P = .001, respectively). IGF-I did not affect cell proliferation. Incorporation of FN retarded time-dependent release of IGF-I from collagen gels. Three dimensional confocal microscopy imaging of cell migration through collagen+Vicryl membranes showed enhanced migration in the IGF+FN group compared to all other groups at 8, 10 and 14 days (P < .05). In a rat skin model, implanted membranes were surrounded by thin collagen capsules and mild inflammatory infiltrates. CONCLUSION: Incorporation of FN into IGF-I-loaded collagen+Vicryl membranes reduced IGF release from collagen and increased the migration of human gingival fibroblasts. The new membrane may promote healing and reformation of the dentogingival junction.

Development of poly(lactide-co-glycolide) nanoparticles functionalized with a mitochondria penetrating peptide.

The development of mitochondria-targeting cell permeable vectors represents a promising therapeutic approach for several diseases, such as cancer and oxidative pathologies. Nevertheless, access to mitochondria can be difficult. A new hybrid material composed by poly(lactide-co-glycolide) (PLGA) functionalized with a 6-mer mitochondria penetrating peptide (MPP), consisting in alternating arginine and unnatural cyclohexylalanine, was developed. Circular dichroism, FT-IR and DSC studies indicated that the conjugation of the peptide with the polymer led to the obtainment of a more rigid material with respect to both PLGA and MPP as such. In particular, a conformational rearrangement to a helical structure was observed for MPP. MPP-PLGA conjugates were used for the preparation of nanoparticles that showed no cytotoxicity in MTT assay, suggesting their putative use for future studies on mitochondria targeting. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

Genetic effects of Vicryl® on fibroblast primary culture.

Vicryl® (polyglactin 910) is an absorbable, synthetic, usually braided suture, indicated for soft tissue approximation and ligation. Vicryl® has a special coating for minimizing friction, easing passage through tissue and easy knot tie down. It is synthetic for minimal tissue reaction. Fibroblasts are the main cells of connective tissue that synthesize extracellular matrix. In this work, we tried to judge the action of Vicryl® on fibroblasts behaviour. We evaluated the expression levels of some adhesion and traction-resistance related genes (ELN, DSP, FN1, FBN1, ITGB1, ITGA1, ITGA5, ITGA2, COL1A1, COL3A1) by using real time Reverse Transcription-Polymerase Chain Reaction (real time RT-PCR). All but 2 genes resulted up-regulated after 48 h of treatment. Our preliminary results point out the potential of Vicryl® as a biocompatible and regenerative tool in medicine.

Changes in expression of cartilaginous genes during chondrogenesis of Wharton's jelly mesenchymal stem cells on three-dimensional biodegradable poly(L-lactide-co-glycolide) scaffolds.

BACKGROUND: In cartilage tissue regeneration, it is important to develop biodegradable scaffolds that provide a structural and logistic template for three-dimensional cultures of chondrocytes. In this study, we evaluated changes in expression of cartilaginous genes during in vitro chondrogenic differentiation of WJ-MSCs on PLGA scaffolds. METHODS: The biocompatibility of the PLGA material was investigated using WJ-MSCs by direct and indirect contact methods according to the ISO 10993-5 standard. PLGA scaffolds were fabricated by the solvent casting/salt-leaching technique. We analyzed expression of chondrogenic genes of WJ-MSCs after a 21-day culture. RESULTS: The results showed the biocompatibility of PLGA and confirmed the usefulness of PLGA as material for fabrication of 3D scaffolds that can be applied for WJ-MSC culture. The in vitro penetration and colonization of the scaffolds by WJ-MSCs were assessed by confocal microscopy. The increase in cell number demonstrated that scaffolds made of PLGA copolymers enabled WJ-MSC proliferation. The obtained data showed that as a result of chondrogenesis of WJ-MSCs on the PLGA scaffold the expression of the key markers collagen type II and aggrecan was increased. CONCLUSIONS: The observed changes in transcriptional activity of cartilaginous genes suggest that the PLGA scaffolds may be applied for WJ-MSC differentiation. This primary study suggests that chondrogenic capacity of WJ-MSCs cultured on the PLGA scaffolds can be useful for cell therapy of cartilage.

Formulation of venlafaxine for once daily administration using polymeric material hybrids.

OBJECTIVE: Controlled release venlafaxine for once daily administration. METHODS: Drug resin complexation followed by polymer encapsulation. A 4(1).2(1) factorial design was used to study the effect of polymer type and core: coat ratio on the release profile and kinetics. Polymer combinations were tried for optimisation adapting the desIMNCility function. The optimised formula was tested in rabbits against commercial extended release capsules. RESULTS: Poly-epsilon-caprolactone, poly(d, l-lactide-co-glycolide) ester and poly(d, l-lactide) ester polymers were more efficient in lowering the release rate and the initial burst release than Eudragit(®)RS100. Encapsulation at 1:1 ratio ensured complete coats and drug release sustainment. Formula prepared using 50:50 PLA/Eudragit at 1:1 ratio sustained the drug release up to 24 h with low burst release. This formula had higher venlafaxine absorption in rabbits compared to the commercial capsules. CONCLUSIONS: The optimised formula is superior to the available once-daily trials regarding enhanced bioavailability, dosage form versatility and ease of scaling up.

Synthesis, characterisation and drug release properties of microspheres of polystyrene with aliphatic polyester side-chains.

A series of graft copolymers consisting of polystyrene backbone with biocompatible side chains based on (co)polymers of l-lactic acid and glycolic acid were synthesised by combination two controlled polymerisations, namely, nitroxide mediated radical polymerisation (NMRP) and ring opening polymerisation (ROP) with "Click" chemistry. The main goal of this work was to design new biodegradable microspheres using obtained graft copolymers for long-term sustained release of imatinib mesylate (IMM) as a model drug. The IMM loaded microspheres of the graft copolymers, polystyrene-g-poly(lactide-co-glycolide) (PS-g-PLLGA), polystyrene-g-poly(lactic acid) (PS-g-PLLA) and poly(lactic-coglycolic acid) (PLLGA) were then prepared by a modified water-in-oil-in-water (w1/o/w2) double emulsion/solvent evaporation technique. The optimised microspheres were characterised by particle size, encapsulation efficiency, and surface morphology also; their degradation and release properties were studied in vitro. The degradation studies of three different types of microspheres showed that the PS backbone of the graft copolymers slows down the degradation rate compared to PLLGA.

Non-aggregated protamine-coated poly(lactide-co-glycolide) nanoparticles of cisplatin crossed blood-brain barrier, enhanced drug delivery and improved therapeutic index in glioblastoma cells: in vitro studies.

BACKGROUND AND OBJECTIVES: Non-aggregated protamine impregnated poly(lactide-co-glycolide) nanoparticles of cisplatin (Pt-PLGA NPs) were synthesized to augment brain delivery. METHODS AND RESULTS: The mean particle size of Pt-PLGA NPs and PLGA NPs were observed to be 173.2 ± 7.9 nm and 140 ± 10.2 nm, respectively. The Pt-PLGA NPs significantly (p < 0.05, one-way analysis of variance; ANOVA) delivered higher amount (172.41 ± 15.04 µg) of cisplatin in comparison to 110.48 ± 4.71 µg by PLGA NPs and 20.83 ± 1.65 µg by cisplatin solution across in vitro bovine brain microvessel endothelial cells. Cisplatin bearing Pt-PLGA NPs was found to be highly cytotoxic to U87 glioblastoma cells with an IC50 of 2.1 µM as compared (one-way ANOVA, p < 0.05) to PLGA NPs (3.9 µM) and cisplatin alone (13.33 µM). Impregnation with Pt enhanced the uptake of PLGA NPs in U87 glioblastoma cells as compared to PLGA NPs by following endocytosis mechanism. CONCLUSION: Cisplatin-loaded Pt-PLGA NPs compel preclinical tumour regression study to further improve its utility against glioblastoma.

Characterisation, cytotoxicity and apoptosis studies of methotrexate-loaded PLGA and PLGA-PEG nanoparticles.

Methotrexate (MTX) widely used in the treatments of various types of malignancies, but high toxicity and short plasma half-life have limited its use. This study was aimed at developing a polymeric drug delivery system for improving the therapeutic index of this potent drug. To achieve these goals, PLGA and PLGA-PEG nanoparticles were prepared using the emulsification-solvent diffusion technique and were optimized for particle size and entrapment efficiency. The optimum loaded nanoparticles were evaluated by cytotoxicity and their ability to induce apoptosis compared to free drug by examining of caspase-3 activity. The results showed that optimized particles were 182 ± 14 nm and 258 ± 10 nm in size for PLGA-PEG and PLGA nanoparticles, respectively, with an entrapment efficiency of more than 51%. The cytotoxicity experiment showed that the nanoparticles were more effective than pure MTX and increase the activity of caspase-3 in MCF7 and AGS and A549 cell lines.

Significance and Influence of Suturing for Ovarian Tissue Transplantation.

The purpose of this animal study was to verify the effect of suturing on graft function in ovarian tissue transplantation. Ovaries from 2-week-old rats were transplanted orthotopically into the ovaries of 8-week-old female Wistar rats. The various transplantation methods used were insertion into the ovarian bursa without suturing (group A: control), suturing with a single 6-0 Vicryl stitch (group B: 6-0*1), suturing with a single 10-0 Vicryl stitch (group C: 10-0*1), and suturing with three 10-0 Vicryl stitches (group D: 10-0*3). Two weeks after transplantation, the transplanted ovaries were evaluated histologically and for gene expression. Engraftment rates of the donor ovaries 14 days after transplantation were 62.5%, 100%, 91.7%, and 100% in groups A, B, C, and D, respectively, significantly lower in group A than in the other groups. In terms of gene expression, TNFα levels were significantly higher in group D, and GDF9 and follicle-stimulating hormone receptor (FSHR) levels were significantly lower in group D than in groups A and B. The number of primordial follicles evaluated by HE staining was significantly lower in groups B, C, and D than in group A. Compared to orthotopic transplantation without sutures, direct suturing to the host improved the engraftment rate, although increasing the number of sutures increased inflammatory marker levels and decreased the number of primordial follicles. We believe that it is important to perform ovarian tissue transplantation using optimal suture diameter for good adhesion, but with a minimum number of sutures to preserve ovarian function.

Solid freeform-fabricated scaffolds designed to carry multicellular mesenchymal stem cell spheroids for cartilage regeneration.

Three-dimensional (3D) cellular spheroids have recently emerged as a new trend to replace suspended single cells in modern cell-based therapies because of their greater regeneration capacities in vitro. They may lose the 3D structure during a change of microenvironment, which poses challenges to their translation in vivo. Besides, the conventional microporous scaffolds may have difficulty in accommodating these relatively large spheroids. Here we revealed a novel design of microenvironment for delivering and sustaining the 3D spheroids. Biodegradable scaffolds with macroporosity to accommodate mesenchymal stem cell (MSC) spheroids were made by solid freeform fabrication (SFF) from the solution of poly(D,L-lactide-co-glycolide). Their internal surface was modified with chitosan following air plasma treatment in order to preserve the morphology of the spheroids. It was demonstrated that human MSC spheroids loaded in SFF scaffolds produced a significantly larger amount of cartilage-associated extracellular matrix in vitro and in NOD/SCID mice compared to single cells in the same scaffolds. Implantation of MSC spheroid-loaded scaffolds into the chondral defects of rabbit knees showed superior cartilage regeneration. This study establishes new perspectives in designing the spheroid-sustaining microenvironment within a tissue engineering scaffold for in vivo applications.

Bioactivity of freeze-dried platelet-rich plasma in an adsorbed form on a biodegradable polymer material.

Owing to the necessity for the immediate preparation from patients' blood, autologous platelet-rich plasma (PRP) limits its clinical applicability. To address this concern and respond to emergency care and other unpredictable uses, we have developed a freeze-dried PRP in an adsorbed form on a biodegradable polymer material (Polyglactin 910). On the polymer filaments of PRP mesh, which was prepared by coating the polymer mesh with human fresh PRP and subsequent freeze-drying, platelets were incorporated, and related growth factors were preserved at high levels. This new PRP mesh preparation significantly and reproducibly stimulated the proliferation of human periodontal ligament cells in vitro and neovascularization in a chorioallantoic membrane assay. A full-thickness skin defect model in a diabetic mouse demonstrated the PRP mesh, although prepared from human blood, substantially facilitated angiogenesis, granulation tissue formation, and re-epithelialization without inducing severe inflammation in vivo. These data demonstrate that our new PRP mesh preparation functions as a bioactive material to facilitate tissue repair/regeneration. Therefore, we suggest that this bioactive material, composed of allogeneic PRP, could be clinically used as a promising alternative in emergency care or at times when autologous PRP is not prepared immediately before application.

A new model of reversible obstructive jaundice using rapidly absorbable suture materials.

PURPOSE: Reversible obstructive jaundice models have some limiting features, including the need for a second anaesthesia, re-laparotomy and surgical intervention after common bile duct ligation. The present study investigates the feasibility of a new application that can eliminate these limitations. Rapidly absorbable suture materials were used for ligation; therefore, spontaneous biliary decompression was anticipated by the self release of these rapidly degrading materials. METHODS: Common bile ducts in Wistar Albino rats were ligated with silk, polyglytone 6211, or irradiated polyglactine 910 (n=7 for each group). Rats were grouped according to both the suture materials and the experiments termination date: 5 days (sham, silk5, polyglytone5, polyglactine5) and 21 days (silk21, polyglytone21, polyglactine21) after the ligation. Biochemical and morphologic changes of liver were assessed. RESULTS: The group polyglactine21 showed significantly lower mean ALT, AST, GGT, total and direct bilirubin values when compared with the group polyglactine5 (p=0.004-0.037). Morphologic changes did not correlate with the biochemical amelioration. In the group polyglytone21, not only the biochemical but also the morphologic changes significantly ameliorated when compared with the group polyglytone5 (p=0.003-0.043). No procedure associated mortality was observed. CONCLUSION: Common bile duct ligation with polyglytone offers a new reversible model for prolonged obstructive jaundice which abolishes the need for relaparotomy and a second surgical intervention and significantly reduces mortality.

Iron Oxide Nanoparticles in Mesenchymal Stem Cell Detection and Therapy.

Mesenchymal stem cells (MSCs) exhibit regenerative and reparative properties. However, most MSC-related studies remain to be translated for regular clinical usage, partly due to challenges in pre-transplantation cell labelling and post-transplantation cell tracking. Amidst this, there are growing concerns over the toxicity of commonly used gadolinium-based contrast agents that mediate in-vivo cell detection via MRI. This urges to search for equally effective but less toxic alternatives that would facilitate and enhance MSC detection post-administration and provide therapeutic benefits in-vivo. MSCs labelled with iron oxide nanoparticles (IONPs) have shown promising results in-vitro and in-vivo. Thus, it would be useful to revisit these studies before inventing new labelling approaches. Aiming to inform regenerative medicine and augment clinical applications of IONP-labelled MSCs, this review collates and critically evaluates the utility of IONPs in enhancing MSC detection and therapeutics. It explains the rationale, principle, and advantages of labelling MSCs with IONPs, and describes IONP-induced intracellular alterations and consequent cellular manifestations. By exemplifying clinical pathologies, it examines contextual in-vitro, animal, and clinical studies that used IONP-labelled bone marrow-, umbilical cord-, adipose tissue- and dental pulp-derived MSCs. It compiles and discusses studies involving MSC-labelling of IONPs in combinations with carbohydrates (Venofer, ferumoxytol, dextran, glucosamine), non-carbohydrate polymers [poly(L-lysine), poly(lactide-co-glycolide), poly(L-lactide), polydopamine], elements (ruthenium, selenium, gold, zinc), compounds/stains (silica, polyethylene glycol, fluorophore, rhodamine B, DAPI, Prussian blue), DNA, Fibroblast growth Factor-2 and the drug doxorubicin. Furthermore, IONP-labelling of MSC exosomes is reviewed. Also, limitations of IONP-labelling are addressed and methods of tackling those challenges are suggested.

A cell-free ROS-responsive hydrogel/oriented poly(lactide-co-glycolide) hybrid scaffold for reducing inflammation and restoring full-thickness cartilage defectsin vivo.

The modulation of inflammation in tissue microenvironment takes an important role in cartilage repair and regeneration. In this study, a novel hybrid scaffold was designed and fabricated by filling a reactive oxygen species (ROS)-scavenging hydrogel (RS Gel) into a radially oriented poly(lactide-co-glycolide) (PLGA) scaffold. The radially oriented PLGA scaffolds were fabricated through a temperature gradient-guided phase separation and freeze-drying method. The RS Gel was formed by crosslinking the mixture of ROS-responsive hyperbranched polymers and biocompatible methacrylated hyaluronic acid (HA-MA). The hybrid scaffolds exhibited a proper compressive modulus, good ROS-scavenging capability, and cell compatibility.In vivotests showed that the hybrid scaffolds significantly regulated inflammation and promoted regeneration of hyaline cartilage after they were implanted into full-thickness cartilage defects in rabbits for 12 w. In comparison with the PLGA scaffolds, the neo-cartilage in the hybrid scaffolds group possessed more deposition of glycosaminoglycans and collagen type II, and were well integrated with the surrounding tissue.

pH-Triggered Poly(ethylene glycol)-Poly(lactic acid/glycolic acid)/Croconaine Nanoparticles-Assisted Multiplexed Photoacoustic Imaging and Enhanced Photothermal Cancer Therapy.

The most advantageous and attractive property of photoacoustic imaging is its capability to visualize and differentiate multiple species according to their unique absorbance profiles simultaneously in a single mixture. We here report the pH-sensitive near-infrared (NIR) croconaine (Croc) dyes-loaded copolymeric PEG-PLGA nanoparticles (NPs) for in vivo multiplexed PA imaging and pH-responsive photothermal therapy (PTT) in an orthotopic xenograft model. PEG chains on the polymeric NPs shell were conjugated with iRGD in another set of NPs to realize efficient tumor targeting. The distribution and the intensity of two sets of iRGD-targeted and nontargeted NPs inside tumors are simultaneously imaged and monitored in vivo. Meanwhile, the utilization of iRGD-targeted PPC815 NPs as a pH-active photothermal agent with promising tumor-inhibition efficacy was demonstrated. As a result, this nanoplatform is capable of assisting multiwavelength unmixing of PA imaging as well as providing remarkable photothermal ablation for anticancer treatment.

In vitro mineralization by preosteoblasts in poly(DL-lactide-co-glycolide) inverse opal scaffolds reinforced with hydroxyapatite nanoparticles.

Inverse opal scaffolds made of poly(DL-lactide-co-glycolide) (PLGA) and hydroxyapatite (HAp) were fabricated using cubic-closed-packed (ccp) lattices of uniform gelatin microspheres as templates and evaluated for bone tissue engineering. The scaffolds exhibited a uniform pore size (213 +/- 4.4 microm), a porosity of approximately 75%, and an excellent connectivity in three dimensions. Three different formulations were examined: pure PLGA, HAp-impregnated PLGA (PLGA/HAp), and apatite (Ap)-coated PLGA/HAp. After seeding with preosteoblasts (MC3T3-E1), the samples were cultured for different periods of time and then characterized by X-ray microcomputed tomography (micro-CT) and scanning electron microscopy to evaluate osteoinductivity in terms of the amount and spatial distribution of mineral secreted from the differentiated preosteoblasts. Our results indicate that preosteoblasts cultured in the Ap-coated PLGA/HAp scaffolds secreted the largest amount of mineral, which was also homogeneously distributed throughout the scaffolds. In contrast, the cells in the pure PLGA scaffolds secreted very little mineral, which was mainly deposited around the perimeter of the scaffolds. These results suggest that the uniform pore structure and favorable surface properties could facilitate the uniform secretion of extracellular matrix from cells throughout the scaffold. The Ap-coated PLGA/HAp scaffold with uniform pore structure could be a promising material for bone tissue engineering.

Surface engineered Poly(lactide-co-glycolide) nanoparticles for intracellular delivery: uptake and cytotoxicity--a confocal raman microscopic study.

Confocal Raman Microscopy (CRM) is used to study the cell internalization of poly(lactide-co-glycolide) (PLGA) nanoparticles (NPs) fabricated by emulsion techniques with either poly(ethylene imine) (PEI) or bovine serum albumin (BSA) as surface stabilizers. HepG2 cells were exposed to PEI and BSA stabilized PLGA NPs. Spontaneous Confocal Raman Spectra taken in one and the same spot of exposed cells showed bands arising from the cellular environment as well as bands characteristic for PLGA, proving that the PLGA NPs have been internalized. It was found that PLGA NPs preferentially colocalize with lipid bodies. The results from Raman spectroscopy are compared with flow cytometry and confocal scanning laser microscopy (CLSM) data. The advantages of CRM as a label-free technique over flow cytometry and CLSM are discussed. Additionally, cell viability studies by means of quick cell counting solution and MTT tests in several cell lines show a generally low toxicity for both PEI and BSA stabilized PLGA NPs, with BSA stabilized PLGA NPs having an even lower toxicity than PEI stabilized.

PLGA-PEG-PLGA hydrogel for ocular drug delivery of dexamethasone acetate.

AIM: This study aims to investigate the suitability of thermosensitive triblock polymer poly-(DL-lactic acid-co-glycolic acid) (PLGA)-polyethylene glycol (PEG)-PLGA as a matrix material for ocular delivery of dexamethasone acetate (DXA). METHODS: The copolymer was synthesized and evaluated for its thermosensitive and gelation properties. DXA in situ gel-forming solution based on PLGA-PEG-PLGA copolymer of 20% (w/w) was prepared and evaluated for ocular pharmacokinetics in rabbit according to the microdialysis method, which was compared to the normal eye drop. RESULT: The copolymer with 20% (w/w) had a low critical solution temperature of 32 degrees C, which is close to the surface temperature of the eye. The C(max) of DXA in the anterior chamber for the PLGA-PEG-PLGA solution was 125.2 microg/mL, which is sevenfold higher than that of the eye drop, along with greater area under the concentration-time curves (AUC). CONCLUSION: These results suggest that the PLGA-PEG-PLGA copolymer is potential thermosensitive in situ gel-forming material for ocular drug delivery, and it may improve the bioavailability, efficacy of some eye drugs.