NiFe2O4-based magnetic covalent organic framework nanocomposites for the efficient adsorption of brominated flame retardants from water.

A new kind of NiFe2O4-based magnetic covalent organic framework nanocomposites (NiFe2O4@COFs) was fabricated through facile synthesis approach under room temperature. The NiFe2O4@COFs exhibited higher adsorption capacity for brominated flame retardants than carbon nanotube material based on hydrophobic interactions, π-π stacking interaction, and van der Waals forces. In addition, the adsorption isotherm and the kinetic model were more suitable for Langmuir and pseudo-second-order model, respectively. NiFe2O4-based magnetic covalent organic framework nanocomposites combined with HPLC-UV (absorption wavelength: 214 nm) technology has excellent adsorption performance, which exhibited low detection limits (0.03-1.9 µg L-1), wide linear range (0.11-1000 µg L-1), good recoveries (91.5-102%) with a relative standard deviation of less than 2.9%. Finally, the prepared magnetic material was successfully used asadsorbents of magnetic solid-phase extraction and applied to the determination of five BFRs from the real water samples. The adsorption and removal of BFRs by NiFe2O4@COFs from water samples.

Validation and Evaluation of Selected Organic Pollutants in Shrimp and Seawater Samples from the NW Portuguese Coast.

The development of coastal regions has contributed to the intensification of environmental contamination, which can accumulate in aquatic biota, such as shrimps. These crustaceans, besides being delicious and being a good source of nutrients, can also accumulate environmental pollutants. Amongst others, these include organochlorine pesticides (OCPs), organophosphorus pesticides (OPPs), brominated flame retardants (BFRs), polychlorinated biphenyls (PCBs) and synthetic musks (SMs). These pollutants, classified as endocrine disruptors, are related to adverse effects in humans and since one of the major routes of exposition is ingestion, this is a cause for concern regarding their presence in food. The aim of the present study was to quantify the presence of environmental pollutants in shrimp samples and in the water from their habitat along the northwest Portuguese coast. In seawater samples, only two OCPs (lindane and DDD) and one BFR (BTBPE) were detected, and in shrimp samples, one OCP (DDD) and three SMs (HHCB, AHTN and ketone) were found. Bioaccumulation and the risk assessment of dietary exposure of SMs in shrimp samples were investigated. It was observed that all shrimp samples analyzed significantly presented bioaccumulation of the three SMs found. Concentrations of SMs detected in shrimp samples do not present a health risk for the adult Portuguese population.

Effective Biobased Phosphorus Flame Retardants from Starch-Derived bis-2,5-(Hydroxymethyl)Furan.

A series of biobased phosphorus flame retardants has been prepared by converting starch-derived bis-2,5-(hydroxymethyl)furan to the corresponding diacrylate followed by Michael addition of phosphite to generate derivatives with phosphorus moieties attached via P-C bonds. All compounds behave as effective flame retardants in DGEBA epoxy resin. The most effective is the DOPO derivative, 2,5-di[(3-dopyl-propanoyl)methyl]furan. When incorporated into a DGEBA blend at a level to provide 2% phosphorus, a material displaying a LOI of 30, an UL 94 rating of V0 and a 40% reduction in combustion peak heat release rate compared to that for resin containing no additive is obtained. The analogous compounds generated from bisphenol A and tetrabromobisphenol A exhibit similar flame-retarding properties.

Determination of organophosphate flame retardants in soil and fish using ultrasound-assisted extraction, solid-phase clean-up, and liquid chromatography with tandem mass spectrometry.

A solid-liquid extraction method in combination with high-performance liquid chromatography and tandem mass spectrometry was developed and optimized for extraction and analysis of organophosphorus flame retardants in soil and fish. Methanol was chosen as the optimum extraction solvent, not only in terms of extraction efficiency, but also for its broader analyte coverage. The subsequent clean-up by solid-phase extraction is required to eliminate matrix coextractives and reduce matrix effects. Recoveries of the optimized method were 50-121% for soil and 47-123% for biota, both with high precision (RSDs <12% in soil and <23% in biota). The method limits of detection ranged from 0.06 to 0.20 ng/g dry weight and between 0.02 and 0.30 ng/g wet weight for soil and biota samples, respectively. However, samples with a high lipid content produce several problems as solid-phase extraction cartridge clogging that increase variability and analysis time. The method was successfully applied for the determination of organophosphorus flame retardants in soil and fish from L'Albufera Natural Park (Valencia, Spain). Target compounds were detected in all soil and fish samples with values varying from 13.8 to 89.7 ng/g dry weight and from 3.3 to 53.0 ng/g wet weight, respectively.

Accelerated solvent extraction coupled to high-performance liquid chromatography-tandem mass spectrometry for simultaneous determination of 11 organophosphorus flame retardants in aquatic products.

BACKGROUND: A new method based on accelerated solvent extraction was developed for the extraction and determination of 11 organophosphorus flame retardants by using a high-performance liquid chromatography-tandem mass spectrometry technique. RESULTS: After optimization of the extraction temperature (80 °C), the extraction solvent (n-hexane), the flush volume (40%) and the static extraction time (4 min), all 11 organophosphorus flame retardants illustrated good linearities (R > 0.999). The limits of detection of the method ranged from 0.016 to 26.58 µg kg-1 in the different matrices. The recoveries were 90.4-111.2% with relative standard deviations 0.21-5.3% for the various aquatic products. CONCLUSION: The proposed method was applied successfully to detect 11 organophosphorus flame retardants in aquatic products, including grass carp, ribbon fish, mud fish, common eel, shrimp and frog. © 2018 Society of Chemical Industry.

Magnetic solid-phase extraction of brominated flame retardants from environmental waters with graphene-doped Fe3O4 nanocomposites.

Graphene-doped Fe3O4 nanocomposites were prepared by a solvothermal reaction of an iron source with graphene. The nanocomposites were characterized by transmission electron microscopy, atomic force microscopy, X-ray diffraction, superconducting quantum interference, Raman spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. This nanomaterial has been used as a magnetic solid-phase extraction sorbent to extract trace brominated flame retardants from environmental waters. Various extraction parameters were optimized including dosage and reusability of the nanocomposites, and pH of sample matrix. The reliability of the magnetic solid-phase extraction protocol based on graphene-doped Fe3O4 nanocomposites was evaluated by investigating the recoveries of 2,4,6-tribromophenol, tetrabromobisphenol A, 4-bromodiphenyl ether, and 4,4'-dibromodiphenyl ether in water samples. Good recoveries (85.0-105.0%) were achieved with the relative standard deviation ranging from 1.1-7.1%. Moreover, it is speculated from characterization and magnetic solid-phase extraction experiment that there is not only π-π stacking but also possible hydrophobic interaction between the graphene-doped Fe3O4 nanocomposites and analytes.

The occurrence and removal of organophosphate ester flame retardants/plasticizers in a municipal wastewater treatment plant in the Pearl River Delta, China.

The occurrence, distribution and main removal pathway of seven widely used organophosphate esters (OPs) in a municipal wastewater treatment plant (WWTP) located in the Pearl River Delta were investigated. Their daily discharge load into the Pearl River via effluent was also estimated. All the target analytes were detected in wastewater, suspended particle and dewatered sludge, with tri-n-butyl phosphate (TBP) and tris(2-butoxyethyl) phosphate (TBEP) as the main components. The total concentrations of TBP and TBEP were 21271.8 ng L(-1) and 4349.4 ng L(-1), 3105.1 ng L(-1) and 494.5 ng L(-1) in influent wastewater and final effluent, respectively. These results indicated that non-chlorinated OPs were removed efficiently in the WWTP, while chlorinated OPs passed through the WWTP unchanged due to their resistance to current wastewater treatment technology. Approximate 91.4 g of non-chlorinated OPs and 23.4 g of chlorinated OPs per day were discharged into the Pearl River via effluent, 2.4 g of non-chlorinated OPs and 0.6 g of chlorinated OPs entered the environment following sludge disposal.

Partitioning of polybrominated diphenyl ethers to dissolved organic matter isolated from Arctic surface waters.

Polybrominated diphenyl ethers (PBDEs) are a class of brominated flame retardant that is distally transported to the Arctic. Little is known about the fate of PBDEs in Arctic surface waters, especially in the presence of dissolved organic matter (DOM). DOM has been shown to interact with hydrophobic organic contaminants and can alter their mobility, bioavailability, and degradation in the environment. In this study, the partitioning of six PBDE congeners between Arctic DOM (isolated via solid phase extraction) and water was measured using the aqueous solubility enhancement method. Measured dissolved organic carbon (DOC)-water partition coefficient (KDOC) values were nearly an order of magnitude lower than previously reported values for the same PBDE congeners in soil or commercial organic matter, ranging from 10(3.97) to 10(5.16) L kg(-1) of organic carbon. Measured results compared favorably with values calculated using polyparameter linear free energy models for Suwannee River fulvic acid. Log KDOC values increased with increasing PBDE hydrophobicity. Slightly lower than expected values were observed for the highest brominated congeners, which we attribute to steric hindrance. This study is the first to comprehensively measure KDOC values for a range of PBDE congeners with DOM isolated from Arctic surface waters.

Investigating a new approach for magnetic ionic liquids: Dispersive liquid-liquid microextraction coupled to pyrolysis gas-chromatography-mass spectrometry to determine flame retardants in sewage sludge samples.

This study addresses the analysis of emerging contaminants, often using chromatographic techniques coupled to mass spectrometry. However, sample preparation is often required prior to instrumental analysis, and dispersive liquid-liquid microextraction (DLLME) is a viable strategy in this context. DLLME stands out for its ability to reduce sample and solvent volumes. Notably, dispersive liquid-liquid microextraction using magnetic ionic liquids (MILs) has gained relevance due to the incorporation of paramagnetic components in the chemical structure, thereby eliminating the centrifugation step. A pyrolizer was selected in this work to introduce sample onto the GC column, since the MIL is extremely viscous and incompatible with direct introduction through an autosampler. This study is the first to report the use of a DLLME/MIL technique for sample introduction through a pyrolizer in gas chromatography coupled to mass spectrometry (GC-MS). This approach enables the MIL to be compatible with gas chromatography systems, resulting in optimized analytical and instrument performance. The analysis of polybrominated diphenyl ether flame retardants (PBDEs) was focused on the PBDE congeners 28, 47, 99, 100, and 153 in sewage sludge samples. The [P6,6,6,14+]2[MnCl42-] MIL was thoroughly characterized using UV-Vis, Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy, as well as thermal analysis. In the chromatographic method, a pyrolyzer was used in the sample introduction step (Py-GC-MS), and critical injection settings were optimized using multivariate approaches. Optimized conditions were achieved with a temperature of 220 °C, a pyrolysis time of 0.60 min, and an injection volume of 9.00 µL. DLLME optimization was performed through central compound planning (CCD), and optimized training conditions were achieved with 10.0 mg of MIL, 3.00 µL of acetonitrile (ACN) as dispersive solvent, extraction time of 60 s, and volume of a sample of 8.50 mL. Precision was observed to range from 0.11 % to 12.5 %, with limits of detection (LOD) of 44.4 µg L-1 for PBDE 28, 16.9 µg L-1 for PBDE 47 and PBDE 99, 33.0 µg L-1 for PBDE 100 and 375 µg L-1 for PBDE 153. PBDE 28 was identified and analyzed in the sludge sample at a concentration of 800 µg L-1. The use of MIL in dispersive liquid-liquid microextraction combined with pyrolysis gas chromatography-mass spectrometry enables identification and quantification of PBDEs in sewage sludge samples at concentrations down to the µg L-1 level.

Transformation and removal of tetrabromobisphenol A from water in the presence of natural organic matter via laccase-catalyzed reactions: reaction rates, products, and pathways.

The widespread occurrence of the brominated flame retardant tetrabromobisphenol A (TBBPA) makes it a possible source of concern. Our experiments suggest that TBBPA can be effectively transformed by the naturally occurring laccase enzyme from Trametes versicolor. These reactions follow second-order kinetics, whereby apparent removal rate is a function of both substrate and enzyme concentrations. For reactions at different initial concentrations and with or without natural organic matter (NOM), reaction products are identified using liquid or gas chromatography with mass spectrometry. Detailed reaction pathways are proposed. It is postulated that two TBBPA radicals resulting from a laccase-mediated reaction are coupled together via interaction of an oxygen atom on one radical and a propyl-substituted aromatic carbon atom on the other. A 2,6-dibromo-4-isopropylphenol carbocation is then eliminated from the radical dimer. All but one of the detected products arise from either substitution or proton elimination of the 2,6-dibromo-4-isopropylphenol carbocation. Three additional products are identified for reactions in the presence of NOM, which suggests that reaction occurs between NOM and TBBPA radical. Data from acute immobilization tests with Daphnia confirm that TBBPA toxicity is effectively eliminated by laccase-catalyzed TBBPA removal. These findings are useful for understanding laccase-mediated TBBPA reactions and could eventually lead to development of novel methods to control TBBPA contamination.

Study of the transference rules for bromine in waste printed circuit boards during microwave-induced pyrolysis.

The production of waste printed circuit boards (WPCBs) has drawn increasing global concern, especially because the high bromine (Br) content (5-15%) places obstacles in the way of simple disposal techniques. Microwave-induced pyrolysis of WPCBs provides a promising way to dispose of these hazardous and resource-filled wastes. The transference rules for Br during microwave-induced pyrolysis have been investigated experimentally. It was found that the microwave energy could be used more efficiently to accelerate the heating rate and improve the final pyrolysis temperature by adding some activated carbon (AC) as microwave absorbents. The high temperature and rapid pyrolysis process promoted the yields of gaseous products and the decomposition of brominated compounds into hydrogen bromide and then benefited the capture of Br and the debromination of byproducts. The application of a calcium carbonate (CaCO3) layer overhead led to over 95% debromination of the liquid products and over 50% capture of the total Br. It can be concluded that the presented method is suitable for the control of Br transference in the recycling of WPCBs. This method can also be extended to the disposal of the electronic scraps.

Polybrominated Diphenyl Ethers in Human Follicular Fluid Dysregulate Mural and Cumulus Granulosa Cell Gene Expression.

Polybrominated diphenyl ethers (PBDEs), a major class of flame retardants incorporated into numerous consumer products, leach out into dust resulting in widespread exposure. There is evidence from in vitro and in vivo animal studies that PBDEs affect ovarian granulosa cell function and follicular development, yet human studies of their association with female infertility are inconclusive. Here, we tested the hypothesis that exposure to the PBDEs in follicular fluid is associated with dysregulation of gene expression in the mural and cumulus granulosa cells collected from women undergoing in vitro fertilization by intracytoplasmic sperm injection. The median concentration of the ∑ 10PBDEs detected in the follicular fluid samples (n = 37) was 15.04 pg/g wet weight. RNA microarray analyses revealed that many genes were differentially expressed in mural and cumulus granulosa cells. Highest vs lowest quartile exposure to the Σ 10PBDEs or to 2 predominant PBDE congeners, BDE-47 or BDE-153, was associated with significant effects on gene expression in both cell types. Mural granulosa cells were generally more sensitive to PBDE exposure compared to cumulus cells. Overall, gene expression changes associated with BDE-47 exposure were similar to those for ∑ 10PBDEs but distinct from those associated with BDE-153 exposure. Interestingly, exposure to BDE-47 and ∑ 10PBDEs activated the expression of genes in pathways that are important in innate immunity and inflammation. To the best of our knowledge, this is the first demonstration that exposure to these environmental chemicals is associated with the dysregulation of pathways that play an essential role in ovulation.

Improved QuEChERS for Analysis of Polybrominated Diphenyl Ethers and Novel Brominated Flame Retardants in Capsicum Cultivars Using Gas Chromatography.

One of the main challenges for analytical laboratories and food safety authorities is the control of food contaminants hazardous to human health. For the first time, a simple, fast, and cost-effective sample preparation method is proposed as an extraction technique to determine 12 brominated flame retardants (BFRs) (seven polybrominated diphenyl ether (PBDE) congeners and five novel BFRs) in Capsicum cultivars. Different QuEChERS and dispersive solid-phase extract (d-SPE) sorbent compositions were evaluated in terms of recovery and matrix effects. The best results were obtained with citrate-buffered version QuEChERS and a cleanup step, with 150 mg of MgSO4, 50 mg of primary secondary amine (PSA), 50 mg of C18, and 5 mg of carbon. The limit of detection (LOD) was between 1.4 and 9.3 µg/kg and R2 > 0.99. Recoveries and matrix effects were between 66 and 104% and 0.58 and 2.18, respectively. The relative standard deviations from repeatability and reproducibility studies and estimation of measurement uncertainty were lower than 20%. Gas chromatography coupled with a mass spectrometer was used to confirm the presence of BFRs in the samples. Novel BFRs were detected lower than the LOD.

Solid-phase extraction of seventeen alternative flame retardants in water as determined by ultra-high-performance liquid chromatography-tandem mass spectrometry.

Flame retardants have evoked public concerns owing to their extensive usage in consumer products and potential adverse effects on human health. In this study, a rapid and sensitive solid-phase extraction-ultra-high-performance liquid chromatography-tandem mass spectrometry (SPE-UPLC-MS/MS) method was developed to determine hexabromocyclododecane (HBCD), tetrabromobisphenol-A (TBBPA), six bromophenols (BPs), and nine organophosphate flame retardants (OPFRs) in water. Because of the differences in elution conditions and ionization modes for group 1 (HBCD, TBBPA, and the BPs) and group 2 (OPFRs), we had to run them twice under the different conditions to analyse group 1 and group 2 using UPLC-MS/MS. The method detection limits were 0.1-2.5 ng/L, linearity range was 0.1-100.0 ng/L for group 1 (HBCD, TBBPA, and the BPs). The method detection limit was 0.10 ng/L, and the linearity range was 0.25-250 ng/L for the OPFRs. First, the pH values of the water samples were adjusted to the range of 2-3. Then, the acidified water samples were extracted by hydrophilic-lipophilic-balance solid phase extraction (HLB-SPE) cartridges, which were eluted with 12 mL of acetonitrile. Finally, the recoveries of HBCD, TBBPA, and the BPs were 76.2-98.1%, and the relative standard deviations (RSDs, n = 5) were 2.0-28.5%. Regarding the OPFRs, the recoveries were 72.4-110.3%, and the RSDs were 0.6-6.9%. The stability experiment showed that the concentration differences were less than 15%, meeting the requirement for quality control samples. This proposed method was successfully applied to surface water, ground water, raw water, finished water, tap water, and bottled water samples.

Iridium oxide (IV) nanoparticle-based electrocatalytic detection of PBDE.

Polybrominated diphenyl ethers (PBDEs) are a type of flame retardants which are currently banned in EU and USA due their hazardousness for humans and mammals. However, these compounds were highly used during more than 30 years and still persist in the environment since they are resistant to degradation. Herein we present a biosensor for the detection of PBDEs using screen printed carbon electrodes (SPCEs) based on the electrochemical monitoring of water oxidation reaction (WOR) catalyzed by iridium oxide (IV) nanoparticles (IrO2 NPs). Our assay shows a limit of detection of 21.5 ppb of PBDE in distilled water. We believe that such an IrO2 NPs-based electrocatalytic sensing system can lead to a rapid, sensitive, low cost and miniaturizable device for the detection of PBDEs.

Organophosphate flame retardants in leachates from six municipal landfills across China.

With the phasing out of brominated flame retardants, organophosphate flame retardants (OPFRs) have been widely used and further detected in multiple environmental media. However, municipal landfill leachates, an important source of contamination of OPFRs to aquatic environment, have not been fully understood, especially in a developing country like China. Thus, the occurrence, aqueous removal efficiency, environmental emission, and risk assessment of 10 OPFRs were investigated in leachates from six municipal landfills across China. The results indicated that except triethyl phosphate (TEP), the remaining 9 OPFRs were detected in both raw and final leachates with different frequencies higher than 33.3%. The range of total concentrations of OPFRs (ΣOPFRs) across China was 29.0-437 and 0.652-32.4 µg L-1 in raw and final leachates, respectively. Tris(2-chloroethyl) phosphate (TCEP) was the dominant species and accounted for 78.5% and 85.8% of average ΣOPFR concentration in raw and final leachates, respectively. This may be because TCEP is the most prevalently used OPFR in China. The overall aqueous removal efficiency of ΣOPFRs across China ranged from 57.7% to 99.8%. Tris(2-butoxyethyl) phosphate was the most removed species (98.8%), whereas TCEP was the least removed species (91.5%). The annual emissions of ΣOPFRs discharged into the aquatic environment from municipal landfills across China were estimated to be between 170 and 7094 g. Further risk assessment based on risk quotient values in the final leachates showed that most OPFRs posed negligible risk except TCEP (medium and high risk) and tributyl phosphate (medium risk).

Dispersive liquid-liquid microextraction followed by reversed phase HPLC for the determination of decabrominated diphenyl ether in natural water.

A simple, rapid, and efficient method, dispersive liquid-liquid microextraction (DLLME), has been developed for the extraction and preconcentration of decabrominated diphenyl ether (BDE-209) in environmental water samples. The factors relevant to the microextraction efficiency, such as the kind and volume of extraction and dispersive solvent, the extraction time, and the salt effect, were optimized. Under the optimum conditions (extraction solvent: tetrachloroethane, volume, 22.0 microL; dispersive solvent: THF, volume, 1.00 mL; extraction time: below 5 s and without salt addition), the most time-consuming step is the centrifugation of the sample solution in the extraction procedure, which is about 2 min. In this method, the enrichment factor could be as high as 153 in 5.00 mL water sample, and the linear range, correlation coefficient (r(2)), detection limit (S/N = 3), and precision (RSD, n = 6) were 0.001-0.5 microg/mL, 0.9999, 0.2 ng/mL, and 2.1%, respectively. This method was successfully applied to the extraction of BDE-209 from tap, East Lake, and Yangtse River water samples; the relative recoveries were 95.8, 92.9, and 89.9% and the RSD% (n = 3) were 1.9, 2.7, and 3.5%, respectively. Comparison of this method with other methods, such as solid-phase microextraction (SPME), and single-drop microextraction (SDME), indicates that DLLME is a simple, fast, and low-cost method for the determination of BDE-209, and thus has tremendous potential in polybrominated diphenyl ethers (PBDEs) residual analysis in environmental water samples.

Determination of polybrominated diphenyl ethers in human serum by gas chromatography - inductively coupled plasma mass spectrometry.

Polybrominated diphenyl ethers (PBDEs) are flame retardants that are added to a wide range of consumer products. Due to their extensive use in the past, their presence has been documented in multiple environmental compartments and living organisms, including humans. To assess the exposure of humans to PBDEs, a new simple, reliable, and sensitive method was developed for the determination of six PBDE congeners (BDE 28, BDE 47, BDE 99, BDE 100, BDE 153, BDE 154) in human serum by gas chromatography-inductively coupled plasma mass spectrometry (GC-ICP-MS). The PBDEs were extracted from 1 mL ofserum by 30 min of mechanical shaking with formic acid. Subsequently, 2 mL of iso-octane was added and 30 min of mechanical shaking was applied. For clean-up of the extract Florisil column was applied. The analytical method was validated by analysis of human serum standard reference materials SRM 1957 (Non-Fortified Human Serum) and SRM 1958 (Fortified Human Serum). Good agreement of the determined concentrations with those certified was found. The repeatability and reproducibility of the analytical method was within 5.9% and 6.1%, respectively, whereas the limits of detection (LODs) for the PBDEs analysed were between 0.0016 and 0.0039 ng mL-1 wet weight (ww). The feasibility of the method was tested by analysing human serum samples. In this study, the determined concentrations in sera were in a range similar to that of as those reported for certain other European countries.

Microwave-assisted extraction of organophosphate flame retardants and plasticizers from indoor dust samples.

A procedure for the determination of eight organophosphate flame retardants and plasticizers in dust samples is presented. Microwave-assisted extraction and gas chromatography (GC) with nitrogen-phosphorus detection (NPD) were used for sample preparation and analytes quantification, respectively. Influence of different variables (type and volume of organic solvent, temperature, time, agitation, etc.) on the yield of the extraction step was evaluated. The most important factor was the type of solvent, with the highest efficiencies corresponding to acetone. Under final conditions 10 mL of this solvent were employed. The extraction was carried out at 130 degrees C and satisfactory yields, similar to those obtained with the Soxhlet technique, were achieved. Due to the high content of organic carbon in dust samples, primary acetone extracts had to be subjected to intensive clean-up. Dilution with ultrapure water followed by concentration on a reversed-phase sorbent and further purification using silica, allowed a significant reduction of co-extracted interferences. Application of the developed methodology to indoor dust from private houses showed important concentrations of several organophosphate esters. The highest levels, up to 19 microg/g, corresponded to tris(butoxyethyl) phosphate; moreover, average values of two chlorinated compounds, used as flame retardants and considered as the most concerning species in the group, exceeded the 1 microg/g level.

On the use of computer assisted resolution of non-separable peaks in a congener specific polybrominated diphenyl ether capillary gas chromatographic analysis.

The use of computer assisted deconvolution for chromatographically not separated peaks in the analysis of polybrominated diphenyl ethers (PBDEs) by capillary gas chromatography (CGC) was studied. Twenty-two not separated clusters containing 48 overlapped PBDEs were registered in the separation of a sample containing 122 PBDE congeners on a semipolar poly(8%-phenyl-92%-dimethyl)siloxane column. There were only two clusters in which overlapped PBDEs differ in the number of bromine atoms {PBDE 126(5Br) co-elutes with 154(6Br) and PBDE 105(5Br) co-elutes with 144(6Br)} and therefore their mass spectra could be successfully used for deconvolution purposes. In 22 other clusters 46 isomeric PBDEs with identical mass spectra overlapped and for their resolution a computer assisted deconvolution procedure using a commercial available program was used. A published procedure for the estimation of minimum number of peaks in a peak cluster for which the data found by deconvolution are reliable, has been adapted. Using this procedure, for eight overlapped PBDE full peak data (single peak retention times and peak areas) were extracted.