A low-cost automated titration system for colorimetric endpoint detection.

An auto titrator system was developed to accurately and precisely detect colorimetric endpoints for spectrochemical titrations. This system was constructed using inexpensive components such as a Raspberry Pi® single-board computer, 3D-printed components, and a commercially available spectral sensor. The auto titrator was evaluated by performing a standard method for determination of water hardness. Regardless of analyst experience, the auto titrator performed better than the traditional titration approach that involves manual dosing of titrant and visual detection of the endpoint. Inter-day, intra-day, inter-instrumental, and intra-instrumental validation studies were performed to establish the accuracy and precision of endpoint detection. The auto titrator eliminates the subjective bias in color perception and produces accurate and precise endpoint results.

THE MAKING OF A FOOTPRINT IN PROTEIN FOOTPRINTING: A REVIEW IN HONOR OF MICHAEL L. GROSS.

Within the past decade protein footprinting in conjunction with mass spectrometry has become a powerful and versatile means to unravel the higher order structure of proteins. Footprinting-based approaches has demonstrated the capacity to inform on interaction sites and dynamic regions that participate in conformational changes. These findings when set in a biological perspective inform on protein folding/unfolding, protein-protein interactions, and protein-ligand interactions. In this review, we will look at the contribution of Dr. Michael L. Gross to protein footprinting approaches such as hydrogen deuterium exchange mass spectrometry and hydroxyl radical protein footprinting. This review details the development of novel footprinting methods as well as their applications to study higher order protein structure. © 2020 The Authors. Mass Spectrometry Reviews published by John Wiley & Sons Ltd. Mass Spec Rev.

A hybrid strategy combining solution NMR spectroscopy and isothermal titration calorimetry to characterize protein-nanodisc interaction.

NMR is a powerful tool for characterizing intermolecular interactions at atomic resolution. However, the nature of the complex interactions of membrane-binding proteins makes it difficult to elucidate the interaction mechanisms. Here, we demonstrated that structural and thermodynamic analyses using solution NMR spectroscopy and isothermal titration calorimetry (ITC) can clearly detect a specific interaction between the pleckstrin homology (PH) domain of ceramide transport protein (CERT) and phosphatidylinositol 4-monophosphate (PI4P) embedded in the lipid nanodisc, and distinguish the specific interaction from nonspecific interactions with the bulk surface of the lipid nanodisc. This NMR-ITC hybrid strategy provides detailed characterization of protein-lipid membrane interactions.

Comparison of prenatal anti-D titration testing by gel and tube methods: A review of the literature.

BACKGROUND: Antenatal titration testing is traditionally performed using a manual tube test. Tube testing has limitations; it is a manual, time-consuming method with wide interobserver variability. Gel-based testing is an attractive alternative because it is more precise and can be automated. This study's objective was to summarize the published literature that assessed the relationship between titrations performed by tube and gel for anti-D alloimmunized pregnancies. STUDY DESIGN AND METHODS: A comprehensive literature search was performed. Articles were selected if research was original and compared at least five pairs of anti-D titration tests performed by gel and tube. Differences in the number of dilutions between gel and tube methods were compared overall by study and cell type using linear models. RESULTS: A total of 512 articles were identified; eight were included, and titer data from 384 tube and gel pairs were abstracted. The median anti-D titer in tube was 8 (range 0-2048) and by gel was 64 (range 0-4096). Anti-D gel titration results were 2.1 (95% CI; 1-3.3) additional dilutions greater than in tube. Most studies utilized double-dose reagent cells for testing. At a tube titer of 16, the sensitivity and specificity of gel titrations is maximal (91% and 94% respectively) at a gel titer of 64. CONCLUSION: Overall, titrations performed by gel were two dilutions higher than the corresponding tube titer. For titrations, double-dose reagent cells should be considered to standardize practice. A rigorous prospective study is needed to compare tube titrations with gel titrations using a standardized process.

Electrochemical Performance of Na3V2(PO4)2F3 Electrode Material in a Symmetric Cell.

A NASICON-based Na3V2(PO4)2F3 (NVPF) cathode material is reported herein as a potential symmetric cell electrode material. The symmetric cell was active from 0 to 3.5 V and showed a capacity of 85 mAh/g at 0.1 C. With cycling, the NVPF symmetric cell showed a very long and stable cycle life, having a capacity retention of 61% after 1000 cycles at 1 C. The diffusion coefficient calculated from cyclic voltammetry (CV) and the galvanostatic intermittent titration technique (GITT) was found to be ~10-9-10-11, suggesting a smooth diffusion of Na+ in the NVPF symmetric cell. The electrochemical impedance spectroscopy (EIS) carried out during cycling showed increases in bulk resistance, solid electrolyte interphase (SEI) resistance, and charge transfer resistance with the number of cycles, explaining the origin of capacity fade in the NVPF symmetric cell. Finally, the postmortem analysis of the symmetric cell after 1000 cycles at a 1 C rate indicated that the intercalation/de-intercalation of sodium into/from the host structure occurred without any major structural destabilization in both the cathode and anode. However, there was slight distortion in the cathode structure observed, which resulted in capacity loss of the symmetric cell. The promising electrochemical performance of NVPF in the symmetric cell makes it attractive for developing long-life and cost-effective batteries.

Complete Kinetic Characterization of Enzyme Inhibition in a Single Isothermal Titration Calorimetric Experiment.

Techniques for rapidly measuring both the strength and mode of enzyme inhibitors are crucial to lead generation and optimization in drug development. Isothermal titration calorimetry (ITC) is emerging as a powerful tool for measuring enzyme kinetics with distinct advantages over traditional techniques. ITC measures heat flow, a feature of nearly all chemical reactions, and gives an instantaneous readout of enzyme velocity, eliminating the need for artificial substrates or postreaction processing. In principle, ITC is an ideal method for characterizing enzyme inhibition. However, existing ITC experiments are not well-suited to rapid throughput and few studies to date have employed this approach. We have developed a new ITC experiment, in which substrate and inhibitor are premixed in the injection syringe, that yields complete kinetic characterization of an enzyme inhibitor in an hour or less. This corresponds to savings in time and material of 5-fold or greater compared to previous ITC methods. We validated the approach using the trypsin inhibitor benzamidine as a model system, recapitulating both its competitive inhibition mode and binding constant. Our approach combines the rapid throughput of optimized spectroscopic assays with the universality and precision of ITC-based methods, providing substantially improved inhibitor characterization for biochemistry and drug development applications.

Immunoglobulins and virus antibody titers: of past needs, current requirements, and future options.

BACKGROUND: Immunoglobulins (Igs) have been in clinical use for almost 70 years, and early on were also used in conjunction with exposure to the measles virus or polio virus. The US regulations that describe functional Ig lot release thus require the demonstration of minimum antibody titers against these two viruses, although the use of vaccines has now dramatically reduced their incidence. The lower clinical importance of these viruses raises the question of whether other virus antibodies might be more informative for patients with immunodeficiency. STUDY DESIGN AND METHODS: A literature survey was conducted to identify viruses of potential clinical concern for people with immunodeficiency. The viruses selected have stable seroepidemiology and associated functional antibody assays. As a result, neutralizing antibody titers to human adenovirus 5 (HAdV5), respiratory syncytial virus (RSV) serotypes A and B, and human parainfluenza virus 3 (hPIV3) were determined in Ig lots produced from plasma collected in either the United States or the European Union. RESULTS: The virus antibody titers measured were high and consistent among the Ig lots tested. Use of either US- or EU-derived plasma as starting material resulted in equivalent virus antibody titers, with the exception of RSV serotype B, for which a lower titer was seen in EU plasma-derived Ig lots. CONCLUSION: With the significant decline in measles virus and polio virus circulation, and even their potential eradication, measurement of antibody titers against other viruses in Ig products may be more informative for functional lot release testing.

Evaluation of Thiol Raman Activities and pKa Values Using Internally Referenced Raman-Based pH Titration.

Thiols, including organothiol and thiol-containing biomolecules, are among the most important classes of chemicals that are used broadly in organic synthesis, biological chemistry, and nanosciences. Thiol pKa values are key indicators of thiol reactivity and functionality. Reported herein is an internally referenced Raman-based pH titration method that enables reliable quantification of thiol pKa values for both mono- and dithiols in water. The degree of thiol ionization is monitored directly using the peak intensity of the S-H stretching feature in the 2600 cm(-1) region relative to an internal reference peak as a function of the titration solution's pH. The thiol pKa values and Raman activity relative to its internal reference were then determined by curve fitting the experimental data with equations derived on the basis of the Henderson-Hasselbalch equation. Using this Raman titration method, we determined for the first time the first and second thiol pKa values for 1,2-benzenedithiol in water. This Raman-based method is convenient to implement, and its underlying theory is easy to follow. It should therefore have broad application for thiol pKa determinations and verification.

Automated spectrophotometric bicarbonate analysis in duodenal juice compared to the back titration method.

OBJECTIVES: We have recently evaluated a short endoscopic secretin test for exocrine pancreatic function. Bicarbonate concentration in duodenal juice is an important parameter in this test. Measurement of bicarbonate by back titration as the gold standard method is time consuming, expensive and technically difficult, thus a simplified method is warranted. We aimed to evaluate an automated spectrophotometric method in samples spanning the effective range of bicarbonate concentrations in duodenal juice. We also evaluated if freezing of samples before analyses would affect its results. METHODS: Patients routinely examined with short endoscopic secretin test suspected to have decreased pancreatic function of various reasons were included. Bicarbonate in duodenal juice was quantified by back titration and automatic spectrophotometry. Both fresh and thawed samples were analysed spectrophotometrically. RESULTS: 177 samples from 71 patients were analysed. Correlation coefficient of all measurements was r = 0.98 (p < 0.001). Correlation coefficient of fresh versus frozen samples conducted with automatic spectrophotometry (n = 25): r = 0.96 (p < 0.001) CONCLUSIONS: The measurement of bicarbonate in fresh and thawed samples by automatic spectrophotometrical analysis correlates excellent with the back titration gold standard. This is a major simplification of direct pancreas function testing, and allows a wider distribution of bicarbonate testing in duodenal juice. Extreme values for Bicarbonate concentration achieved by the autoanalyser method have to be interpreted with caution.

Lab on paper: iodometric titration on a printed card.

A paper test card has been engineered to perform an iodometric titration, an application that requires storage and mixing on demand of several mutually incompatible reagents. The titration is activated when a user applies a test solution to the test card: the dried reagents are reconstituted and combined through a surface-tension-enabled mixing (STEM) mechanism. The device quantifies 0.8-15 ppm of iodine atoms from iodate in aqueous solutions. This is useful, for example, to quantify iodine levels in fortified salt. A blinded internal laboratory validation established the accuracy as 1.4 ppm I and the precision as 0.9 ppm I when the test card was read by newly trained users. Using computer software to process images, the accuracy and precision both improved to 0.9 ppm I. The paper card can also detect substandard ß lactam antibiotics using an iodometric back-titration. When used to quantify amoxicillin, good distinction is achieved between solutions that differ by 0.15 mg/mL over a working range of 0-0.9 mg/mL. The test card was designed to meet the World Health Organization ASSURED criteria for use in low resource settings, where laboratory-based analytical procedures are often not available.

Nanopore back titration analysis of dipicolinic acid.

Here, we report a novel label-free nanopore back titration method for the detection of dipicolinic acid, a marker molecule for bacterial spores. By competitive binding of the target analyte and a large ligand probe to metal ions, dipicolinic acid could be sensitively and selectively detected. This nanopore back titration approach should find useful applications in the detection of other species of medical, biological, or environmental importance if their direct detection is difficult to achieve.

Calcium-buffering effects of gluconate and nucleotides, as determined by a novel fluorimetric titration method.

Significantly more Ca(2+) influx is required for eliciting release of neurotransmitter during whole cell patch clamp recording in the Calyx of Held, when gluconate with 3 mm free ATP is used as pipette filling solution, as compared to a methanesulfonate-based solution with excess Mg(2+). This reduction in efficiency of Ca(2+) in eliciting release is due to low-affinity Ca(2+) binding of both gluconate and ATP(2-) anions. To study these effects we developed a simple fluorimeteric titration procedure, which reports the dissociation constant, KD, of a given Ca(2+) indicator dye, multiplied by 1 plus the sum of Ca(2+) binding ratios of any anions, which act as low-affinity Ca(2+) ligands. For solutions without Ca(2+) binding anions we find KD values for Fura2FF ranging from 11.5 ± 1.7 to 15.6 ± 7.47 µm depending on the dominant anion used. For Fura6F and KCl-based solutions we find KD = 17.8 ± 1.3 µm. For solutions with gluconate as the main anion and for solutions that contain nucleotides, such as ATP and GTP, we find much higher values for the product. Assuming that the KD of the indicator dye is equal to that of KCl-based solutions we calculate the summed Ca(2+) binding ratios and find a value of 3.55 for a solution containing 100 mm potassium gluconate and 4 mm ATP. Gluconate contributes a value of 1.75 to this number, while the contribution of ATP depends strongly on the presence of Mg(2+) and varies from 0.8 (with excess Mg(2+)) to 13.8 (in the presence of 3 mm free ATP). Methanesulfonate has negligible Ca(2+) binding capacity. These results explain the reduced efficiency of Ca(2+) influx in the presence of gluconate or nucleotides, as these anions are expected to intercept Ca(2+) ions at short distance.

Simple azo-based salicylaldimine as colorimetric and fluorescent probe for detecting anions in semi-aqueous medium.

A series of novel, highly sensitive, and selective azo-based anion sensors 1-3 have been designed and synthesized from the condensation reaction between 4-amino azo benzene and three different aldehydes. The structure of the sensors 1-3 were confirmed by IR, HRMS, (1)H NMR, and (13)C NMR spectroscopic methods. Colorimetric naked-eye analysis revealed the anion detection by receptors 2 and 3 as color changes from yellow to pink and yellow to orange, respectively. Anion sensing ability of all receptors was further investigated by (1) H NMR titration, UV-vis experiment, and fluorescence titration. UV-vis measurements highly indicate the selective recognition of fluoride and acetate ions in 9:1 dimethyl sulfoxide-H2O (v/v) for receptors 2 and 3. Binding constant value showed among all receptors, receptor 3 has strong affinity toward F(-) and AcO(-) in semi-aqueous medium, which is due to the presence of chromogenic signaling unit in it. The F(-) ion detection property of receptor 2 in organic medium was also extended in the real sample like toothpaste.

Fast and selective determination of total protein in milk powder via titration of moving reaction boundary electrophoresis.

In this paper, moving reaction boundary titration (MRBT) was developed for rapid and accurate quantification of total protein in infant milk powder, from the concept of moving reaction boundary (MRB) electrophoresis. In the method, the MRB was formed by the hydroxide ions and the acidic residues of milk proteins immobilized via cross-linked polyacrylamide gel (PAG), an acid-base indicator was used to denote the boundary motion. As a proof of concept, we chose five brands of infant milk powders to study the feasibility of MRBT method. The calibration curve of MRB velocity versus logarithmic total protein content of infant milk powder sample was established based on the visual signal of MRB motion as a function of logarithmic milk protein content. Weak influence of nonprotein nitrogen (NPN) reagents (e.g., melamine and urea) on MRBT method was observed, due to the fact that MRB was formed with hydroxide ions and the acidic residues of captured milk proteins, rather than the alkaline residues or the NPN reagents added. The total protein contents in infant milk powder samples detected via the MRBT method were in good agreement with those achieved by the classic Kjeldahl method. In addition, the developed method had much faster measuring speed compared with the Kjeldahl method.

Comparison of manual versus automatic continuous positive airway pressure titration and the development of a predictive equation for therapeutic continuous positive airway pressure in Chinese patients with obstructive sleep apnoea.

BACKGROUND AND OBJECTIVE: Whether the therapeutic nasal continuous positive airway pressure (CPAP) derived from manual titration is the same as derived from automatic titration is controversial. The purpose of this study was to compare the therapeutic pressure derived from manual titration with automatic titration. METHODS: Fifty-one patients with obstructive sleep apnoea (OSA) (mean apnoea/hypopnoea index (AHI) = 50.6 ± 18.6 events/h) who were newly diagnosed after an overnight full polysomnography and who were willing to accept CPAP as a long-term treatment were recruited for the study. Manual titration during full polysomnography monitoring and unattended automatic titration with an automatic CPAP device (REMstar Auto) were performed. A separate cohort study of one hundred patients with OSA (AHI = 54.3 ± 18.9 events/h) was also performed by observing the efficacy of CPAP derived from manual titration. RESULTS: The treatment pressure derived from automatic titration (9.8 ± 2.2 cmH(2)O) was significantly higher than that derived from manual titration (7.3 ± 1.5 cmH(2)O; P < 0.001) in 51 patients. The cohort study of 100 patients showed that AHI was satisfactorily decreased after CPAP treatment using a pressure derived from manual titration (54.3 ± 18.9 events/h before treatment and 3.3 ± 1.7 events/h after treatment; P < 0.001). CONCLUSIONS: The results suggest that automatic titration pressure derived from REMstar Auto is usually higher than the pressure derived from manual titration.

Measuring titratable alkalinity by single versus double endpoint titration: An evaluation in two cyprinodont species and implications for characterizing net H+ flux in aquatic organisms.

In this study, Na(+) uptake and acid-base balance in the euryhaline pupfish Cyprinodon variegatus variegatus were characterized when fish were exposed to pH 4.5 freshwater (7mM Na(+)). Similar to the related cyprinodont, Fundulus heteroclitus, Na(+) uptake was significantly inhibited when exposed to low pH water. However, it initially appeared that C. v. variegatus increased apparent net acid excretion at low pH relative to circumneutral pH. This result is opposite to previous observations for F. heteroclitus under similar conditions where fish were observed to switch from apparent net H(+) excretion at circumneutral pH to apparent net H(+) uptake at low pH. Further investigation revealed disparate observations between these studies were the result of using double endpoint titrations to measure titratable alkalinity fluxes in the current study, while the earlier study utilized single endpoint titrations to measure these fluxes (i.e.,. Cyprinodon acid-base transport is qualitatively similar to Fundulus when characterized using single endpoint titrations). This led to a comparative investigation of these two methods. We hypothesized that either the single endpoint methodology was being influenced by a change in the buffer capacity of the water (e.g., mucus being released by the fish) at low pH, or the double endpoint methodology was not properly accounting for ammonia flux by the fish. A series of follow-up experiments indicated that buffer capacity of the water did not change significantly, that excretion of protein (a surrogate for mucus) was actually reduced at low pH, and that the double endpoint methodology does not properly account for NH(3) excretion by fish under low pH conditions. As a result, it overestimates net H(+) excretion during low pH exposure. After applying the maximum possible correction for this error (i.e., assuming that all ammonia is excreted as NH(3)), the double endpoint methodology indicates that net H(+) transport was reduced to effectively zero in both species at pH 4.5. However, significant differences between the double endpoint (no net H(+) transport at low pH) and single endpoint titrations (net H(+) uptake at low pH) remain to be explained.

Assessment of phytoestrogen and mycoestrogen recognition by recombinant human estrogen receptor-α using ligand titration arrays.

INTRODUCTION: Exposure to phytoestrogens and mycoestrogens has emerged as a public health issue due to their potentially endocrine disruption activities resulting from direct interaction with sex-steroid hormone receptors. There is a significant requirement for comprehensive, reproducible methods to determine the extent of estrogen mimicry by compounds encountered in the environment to estimate risk:benefit ratios, particularly in humans. OBJECTIVE: To develop a systematic approach for assessing recognition of chemically diverse compounds by human estrogen receptor proteins to aid in their assessment as endocrine disruptor compounds (EDCs). METHODS: Recombinant human estrogen receptor-α protein (rhERα) was expressed in Saccharomyces cervisiae as an ubiquitin fusion under control of a CUP1 promoter and partially purified with heparin affinity chromatography in the unliganded state. A novel radio-ligand binding array was developed to evaluate structurally diverse compounds, both naturally occurring and synthetic, for estrogen binding activity and affinity. RESULTS: Binding affinities of suspected estrogen mimics for rhERα were calculated over a range of [(3) H]estradiol-17ß concentrations using Lundon OneSite® and Compete® software. CONCLUSION: ß-zearalanol, a mycoestrogen similar to zearalenone used as an ICCVAM validation substance for the in vitro estrogen receptor binding assays (ICCAM report), was employed as a model estrogen mimic to illustrate the approach, methods and calculations using these techniques.

Considerations in determination of residual moisture in lyophilized demineralized bone matrix: the role of residual moisture analyzers.

The objective of this study is to determine whether a residual moisture analyzer (RMA) can be an acceptable instrument for measuring the residual moisture in lyophilized demineralized bone matrix (DBM). Instruments from two different manufacturers with differing configurations and controls were compared: the Ohaus MB45 and Arizona Instrument MAX4000XL. The effects of various factors such as test temperature, drying profile, end point criteria, lift compensation, chamber configuration, and rehydration on residual moisture (RM) are examined. The performance of the RMAs is based on their ability to reproduce RM results obtained by the current standard gravimetric method. RMAs provide reliable, accurate and reproducible results in a number of industries that rely on the determination of RM. We hypothesize that RMAs are suitable for measuring RM in DBM and provide validation study data with optimized settings for these two instruments. Potentially, such studies will provide justification for allowance of this methodology as an acceptable alternative to the current gravimetric method allowed by American Association of Tissue Banks Standards.

Spectrophotometric titration of bimetallic metal cation binding in polyamido(amine) dendrimer templates.

Spectrophotometric titration and a binding isotherm were used to accurately assess the loading capacity of generation four polyamido(amine) (PAMAM) dendrimer templates with terminal alcohol groups (G4-OH). Preparation of bimetallic G4-OH dendrimer-encapsulated metal nanoclusters (DENs) necessitates knowledge of the precise metal-ion binding capacity. The binding of metal ions such as Pt(2+) and Pd(2+) has proven difficult to assess via UV-vis spectroscopy because the absorbance shifts associated with metal-ion binding within the dendrimer template are masked by the absorbance of the PAMAM dendrimer itself. In contrast, the binding of Cu(2+) to G4-OH PAMAM dendrimer results in a strong, distinct absorption band at 300 nm, making UV-vis spectrophotometric titration with copper straightforward. Here we use copper binding as a means to assess the number of binding sites remaining within the PAMAM G4-OH dendrimer after the complexation of a specified molar excess of Pd(2+) or Pt(2+). In addition, we use a binding isotherm to mathematically estimate the loading capacity of the dendrimer in each case. The loading capacities for M(2+) in the G4-OH dendrimer were found to be ∼16 for copper alone, ∼21 for copper combined with palladium, and ∼25 for copper combined with platinum.

Nonlinear analyte concentration gradients for one-step kinetic analysis employing optical microring resonators.

Conventional methods to probe the binding kinetics of macromolecules at biosensor surfaces employ a stepwise titration of analyte concentrations and measure the association and dissociation to the immobilized ligand at each concentration level. It has previously been shown that kinetic rates can be measured in a single step by monitoring binding as the analyte concentration increases over time in a linear gradient. We report here the application of nonlinear analyte concentration gradients for determining kinetic rates and equilibrium binding affinities in a single experiment. A versatile nonlinear gradient maker is presented, which is easily applied to microfluidic systems. Simulations validate that accurate kinetic rates can be extracted for a wide range of association and dissociation rates, gradient slopes, and curvatures, and with models for mass transport. The nonlinear analyte gradient method is demonstrated with a silicon photonic microring resonator platform to measure prostate specific antigen-antibody binding kinetics.