Potential enthalpic energy of water in oils exploited to control supramolecular structure.

Water directs the self-assembly of both natural1,2 and synthetic3-9 molecules to form precise yet dynamic structures. Nevertheless, our molecular understanding of the role of water in such systems is incomplete, which represents a fundamental constraint in the development of supramolecular materials for use in biomaterials, nanoelectronics and catalysis 10 . In particular, despite the widespread use of alkanes as solvents in supramolecular chemistry11,12, the role of water in the formation of aggregates in oils is not clear, probably because water is only sparingly miscible in these solvents-typical alkanes contain less than 0.01 per cent water by weight at room temperature 13 . A notable and unused feature of this water is that it is essentially monomeric 14 . It has been determined previously 15 that the free energy cost of forming a cavity in alkanes that is large enough for a water molecule is only just compensated by its interaction with the interior of the cavity; this cost is therefore too high to accommodate clusters of water. As such, water molecules in alkanes possess potential enthalpic energy in the form of unrealized hydrogen bonds. Here we report that this energy is a thermodynamic driving force for water molecules to interact with co-dissolved hydrogen-bond-based aggregates in oils. By using a combination of spectroscopic, calorimetric, light-scattering and theoretical techniques, we demonstrate that this interaction can be exploited to modulate the structure of one-dimensional supramolecular polymers.

Unexpected Acid-Triggered Formation of Reversibly Photoswitchable Stenhouse Salts from Donor-Acceptor Stenhouse Adducts.

Donor-acceptor Stenhouse adducts (DASAs) are reversibly photoswitchable dyes, which are able to interconvert between a red/NIR absorbing triene-like state and a colorless cyclic state. Although optically attractive for multiple applications, their low solubility and lack of photoswitching in water impede their use in aqueous environments. We developed water-soluble DASAs based on indoline as donor and methyl, or trifluoromethyl, pyrazolone-based acceptors. In acetonitrile, photophysical analysis and photochemical studies, accounted with a three-state kinetic model, confirmed the reversible photoswitching mechanism previously proposed. In water, the colorless cyclic state is a thermodynamic sink at neutral pH values. In contrast, in acidic conditions, we observed a fast scrambling of DASAs' end-group resulting in the in situ formation of Stenhouse salts (StS), which are in turn capable of reversible photoswitching. We believe that this unexpected result is of interest not only for the future design of DASAs with improved stability, but also for further development and applications of StS as photoswitchable probes.

Biasing the Screw-Sense of Supramolecular Coassemblies Featuring Multiple Helical States.

By enchaining a small fraction of chiral monomer units, the helical sense of a dynamic polymer constructed from achiral monomer units can be disproportionately biased. This phenomenon, known as the sergeants-and-soldiers (S&S) effect, has been found to be widely applicable to dynamic covalent and supramolecular polymers. However, it has not been exemplified with a supramolecular polymer that features multiple helical states. Herein, we demonstrate the S&S effect in the context of the temperature-controlled supramolecular copolymerization of chiral and achiral biphenyl tetracarboxamides in alkanes. The one-dimensional helical structures presented in this study are unique because they exhibit three distinct helical states, two of which are triggered by coassembling with monomeric water that is codissolved in the solvent. The self-assembly pathways are rationalized using a combination of mathematical fitting and simulations with a thermodynamic mass-balance model. We observe an unprecedented case of an "abnormal" S&S effect by changing the side chains of the achiral soldier. Although the molecular structure of these aggregates remains elusive, the coassembly of water is found to have a profound impact on the helical excess.

Long-Lived Charge-Transfer State from B-N Frustrated Lewis Pairs Enchained in Supramolecular Copolymers.

The field of supramolecular polymers is rapidly expanding; however, the exploitation of these systems as functional materials is still elusive. To become competitive, supramolecular polymers must display microstructural order and the emergence of new properties upon copolymerization. To tackle this, a greater understanding of the relationship between monomers' design and polymer microstructure is required as well as a set of functional monomers that efficiently interact with one another to synergistically generate new properties upon copolymerization. Here, we present the first implementation of frustrated Lewis pairs into supramolecular copolymers. Two supramolecular copolymers based on π-conjugated O-bridged triphenylborane and two different triphenylamines display the formation of B-N pairs within the supramolecular chain. The remarkably long lifetime and the circularly polarized nature of the resulting photoluminescence emission highlight the possibility to obtain an intermolecular B-N charge transfer. These results are proposed to be the consequences of the enchainment of B-N frustrated Lewis pairs within 1D supramolecular aggregates. Although it is challenging to obtain a precise molecular picture of the copolymer microstructure, the formation of random blocklike copolymers could be deduced from a combination of optical spectroscopic techniques and theoretical simulation.

Future of Supramolecular Copolymers Unveiled by Reflecting on Covalent Copolymerization.

Supramolecular copolymers are an emerging class of materials, and in the last years their potential has been demonstrated on a broad scale. Implementing noncovalent polymers with multiple components can bring together useful features such as dynamicity and new functionalities. However, mastering and tuning the microstructure of these systems is still an open challenge. In this Perspective, we aim to trace the general principles of supramolecular copolymerization by analyzing them through the lens of the well-established field of covalent copolymerization. Our goal is to delineate guidelines to classify and analyze supramolecular copolymers in order to create a fruitful platform to design and investigate new multicomponent systems.

Supramolecular Block Copolymers under Thermodynamic Control.

Supramolecular block copolymers are becoming attractive materials in nascent optoelectronic and catalytic technologies. However, their dynamic nature precludes the straightforward tuning and analysis of the polymer's structure. Here we report the elucidation on the microstructure of triarylamine triamide-based supramolecular block copolymers through a comprehensive battery of spectroscopic, theoretical, and super-resolution microscopic techniques. Via spectroscopic analysis we demonstrate that the direct mixing of preassembled homopolymers and the copolymerization induced by slow cooling of monomers lead to the formation of the same copolymer's architecture. The small but pronounced deviation of the experimental spectra from the linear combination of the homopolymers' spectra hints at the formation of block copolymers. A mass balance model is introduced to further unravel the microstructure of the copolymers formed, and it confirms that stable multiblock supramolecular copolymers can be accessed from different routes. The multiblock structure of the supramolecular copolymers originates from the fine balance between favorable hydrogen-bonding interactions and a small mismatch penalty between two different monomers. Finally, we visualized the formation of the supramolecular block copolymers by adapting a recently developed super-resolution microscopy technique, interface point accumulation for imaging in nanoscale topography (iPAINT), for visualizing the architectures formed in organic media. Combining multiple techniques was crucial to unveil the microstructure of these complex dynamic supramolecular systems.

Control of Electrons' Spin Eliminates Hydrogen Peroxide Formation During Water Splitting.

The production of hydrogen through water splitting in a photoelectrochemical cell suffers from an overpotential that limits the efficiencies. In addition, hydrogen-peroxide formation is identified as a competing process affecting the oxidative stability of photoelectrodes. We impose spin-selectivity by coating the anode with chiral organic semiconductors from helically aggregated dyes as sensitizers; Zn-porphyrins and triarylamines. Hydrogen peroxide formation is dramatically suppressed, while the overall current through the cell, correlating with the water splitting process, is enhanced. Evidence for a strong spin-selection in the chiral semiconductors is presented by magnetic conducting (mc-)AFM measurements, in which chiral and achiral Zn-porphyrins are compared. These findings contribute to our understanding of the underlying mechanism of spin selectivity in multiple electron-transfer reactions and pave the way toward better chiral dye-sensitized photoelectrochemical cells.

Unravelling the Pathway Complexity in Conformationally Flexible N-Centered Triarylamine Trisamides.

Two families of C3 -symmetrical triarylamine-trisamides comprising a triphenylamine- or a tri(pyrid-2-yl)amine core are presented. Both families self-assemble in apolar solvents via cooperative hydrogen-bonding interactions into helical supramolecular polymers as evidenced by a combination of spectroscopic measurements, and corroborated by DFT calculations. The introduction of a stereocenter in the side chains biases the helical sense of the supramolecular polymers formed. Compared to other C3 -symmetrical compounds, a much richer self-assembly landscape is observed. Temperature-dependent spectroscopy measurements highlight the presence of two self-assembled states of opposite handedness. One state is formed at high temperature from a molecularly dissolved solution via a nucleation-elongation mechanism. The second state is formed below room temperature through a sharp transition from the first assembled state. The change in helicity is proposed to be related to a conformational switch of the triarylamine core due to an equilibrium between a 3:0 and a 2:1 conformation. Thus, within a limited temperature window, a small conformational twist results in an assembled state of opposite helicity.

Multiplex enzymatic synthesis of DNA with single-base resolution.

Enzymatic DNA synthesis (EDS) is a promising benchtop and user-friendly method of nucleic acid synthesis that, instead of solvents and phosphoramidites, uses mild aqueous conditions and enzymes. For applications such as protein engineering and spatial transcriptomics that require either oligo pools or arrays with high sequence diversity, the EDS method needs to be adapted and certain steps in the synthesis process spatially decoupled. Here, we have used a synthesis cycle comprising a first step of site-specific silicon microelectromechanical system inkjet dispensing of terminal deoxynucleotidyl transferase enzyme and 3' blocked nucleotide, and a second step of bulk slide washing to remove the 3' blocking group. By repeating the cycle on a substrate with an immobilized DNA primer, we show that microscale spatial control of nucleic acid sequence and length is possible, which, here, are assayed by hybridization and gel electrophoresis. This work is distinctive for enzymatically synthesizing DNA in a highly parallel manner with single base control.

Correlation of fluorescence evolution for quantitative analysis of labels and sensors.

Titration without separation, e.g. quantification of a target species in living cells, is a challenge of analytical chemistry. We perform the selective detection of a target using the kinetics involved in a photochemical process and develop a correlation method that we illustrate by the titration of a fluorescent photoswitcher and the target of a photoswitching sensor. Correlating an input time series and a well-chosen weighting function associated with a variable characteristic time yields a spectrum of characteristic times. The upper integration limit of the correlation output can be chosen to match the argument of an extremum of the spectrum with a characteristic time of the input time series in order to quantify the target. A similar procedure is followed to optimize the signal-to-noise ratio. Selectivity and signal-to-noise ratio associated with 15 weighting functions are theoretically predicted. The results are applied to the titration of the reversibly photoswitchable fluorescent protein Dronpa-2 and the titration of calcium using a reversibly photoswitchable fluorescent sensor. The performance of the correlation method is favorably compared to the one of other dynamic contrast protocols.

Quantitative Model for Reversibly Photoswitchable Sensors.

Composed of a reversibly photoswitchable unit allosterically linked to a sensing module, reversibly photoswitchable sensors (rs-sensors) represent a new and attractive strategy to quantitatively read-out analyte concentrations. However, their kinetic response to illumination is complex, and much attention is required from the design to the application steps. Here, we exploit a generic kinetic model of rs-sensors which enables us to point to key thermokinetic parameters, such as dissociation constants and kinetic rates for exchange toward the analyte, and cross-sections for photoswitching. The application of the model allows to evaluate the robustness of the analyzed parameters and to introduce a methodology for their reliable use. Model and methodology have been experimentally tested on a newly reported calcium sensor based on a reversibly photoswitchable green fluorescent protein allosterically linked to a calcium-sensing module integrating calmodulin and an RS20 peptide.

Equilibrium Model for Supramolecular Copolymerizations.

The coassembly of different building blocks into supramolecular copolymers provides a promising avenue to control their properties and to thereby expand the potential of supramolecular polymers in applications. However, contrary to covalent copolymerization which nowadays can be well controlled, the control over sequence, polymer length, and morphology in supramolecular copolymers is to date less developed, and their structures are more determined by the delicate balance in binding free energies between the distinct building blocks than by kinetics. Consequently, to rationalize the structures of supramolecular copolymers, a thorough understanding of their thermodynamic behavior is needed. Though this is well established for single-component assemblies and over the past years several models have been proposed for specific copolymerization cases, a generally applicable model for supramolecular cooperative copolymers is still lacking. Here, we provide a generalization of our earlier mass-balance models for supramolecular copolymerizations that encompasses all our earlier models. In this model, the binding free energies of each pair of monomer types in each aggregate type can be set independently. We provide scripts to solve the model numerically for any (co)polymerization of one or two types of monomer into an arbitrary number of distinct aggregate types. We illustrate the applicability of the model on data from literature as well as on new experimental data of triarylamine triamide-based copolymers in three distinct solvents. We show that apart from common properties such as the degree of polymerization and length distributions, our approach also allows us to investigate properties such as the copolymer microstructure, that is, the internal ordering of monomers within the copolymers. Moreover, we show that in some cases, also intriguing analytical approximations can be derived from the mass balances.

Painting Supramolecular Polymers in Organic Solvents by Super-resolution Microscopy.

Despite the rapid development of complex functional supramolecular systems, visualization of these architectures under native conditions at high resolution has remained a challenging endeavor. Super-resolution microscopy was recently proposed as an effective tool to unveil one-dimensional nanoscale structures in aqueous media upon chemical functionalization with suitable fluorescent probes. Building upon our previous work, which enabled photoactivation localization microscopy in organic solvents, herein, we present the imaging of one-dimensional supramolecular polymers in their native environment by interface point accumulation for imaging in nanoscale topography (iPAINT). The noncovalent staining, typical of iPAINT, allows the investigation of supramolecular polymers' structure in situ without any chemical modification. The quasi-permanent adsorption of the dye to the polymer is exploited to identify block-like arrangements within supramolecular fibers, which were obtained upon mixing homopolymers that were prestained with different colors. The staining of the blocks, maintained by the lack of exchange of the dyes, permits the imaging of complex structures for multiple days. This study showcases the potential of PAINT-like strategies such as iPAINT to visualize multicomponent dynamic systems in their native environment with an easy, synthesis-free approach and high spatial resolution.