The usage of composite nanomaterials in biomedical engineering applications.

Nanotechnology is still developing over the decades and it is commonly used in biomedical applications with the design of nanomaterials due to the several purposes. With the investigation of materials on the molecular level has increased the develop composite nanomaterials with exceptional properties using in different applications and industries. The application of these composite nanomaterials is widely used in the fields of textile, chemical, energy, defense industry, electronics, and biomedical engineering which is growing and developing on human health. Development of biosensors for the diagnosis of diseases, drug targeting and controlled release applications, medical implants and imaging techniques are the research topics of nanobiotechnology. In this review, overview of the development of nanotechnology and applications which is use of composite nanomaterials in biomedical engineering is provided.

A model study by using polymeric molecular imprinting nanomaterials for removal of penicillin G.

We aimed to develop a molecularly imprinted polymeric systems with using penicillin G as a template molecule for removal of the antibiotic residues from environmental samples. Firstly, Pen-G-imprinted poly (2-hydroxyethyl methacrylate-N-methacryloyl-L-alanine) [p(HEMA-MAAL)] nanopolymers were synthesized by surfactant-free emulsion polymerization method. Then, template molecule (Pen-G) was extracted from nanopolymers. Synthesized nanopolymers were characterized by different methods such as Fourier-transform infrared spectroscopy (FTIR), elemental and zeta-size analysis, scanning electron microscope (SEM), and surface area calculations. Nanopolymers have 60.38 nm average size and 1034.22 m2/g specific surface area. System parameters on Pen-G adsorption onto Pen-G imprint nanopolymers were investigated at different conditions. The specific adsorption value (Qmax) of molecularly impirinted p(HEMA-MAAL) nanopolymers was found 71.91 g/g for Pen-G in 5 mg/mL Pen-G initial concentration. Pen-G adsorption of molecularly imprinted nanopolymers was 15 times more than non-imprinted polymer. It is shown that obtained p(HEMA-MAAL) nanopolymer was a reuseable product which protected its adsorption capacity of 98.9% after 5th adsorption-desorption cycle. In conclusion, we suggest a method to develop a nanostructure, selective, low-cost molecularly imprinted polymeric systems with using penicillin G as a template molecule for removal of the antibiotic residues.

A new morphological approach for removing acid dye from leather waste water: preparation and characterization of metal-chelated spherical particulated membranes (SPMs).

In this study, p(HEMA-GMA) poly(hydroxyethyl methacrylate-co-glycidyl methacrylate) spherical particulated membranes (SPMs) were produced by UV-photopolymerization and the synthesized SPMs were coupled with iminodiacetic acid (IDA). Finally the novel SPMs were chelated with Cr(III) ions as ligand and used for removing acid black 210 dye. Characterizations of the metal-chelated SPMs were made by SEM, FTIR and swelling test. The water absorption capacities and acid dye adsorption properties of the SPMs were investigated and the results were 245.0, 50.0, 55.0 and 51.9% for p(HEMA), p(HEMA-GMA), p(HEMA-GMA)-IDA and p(HEMA-GMA)-IDA-Cr(III) SPMs respectively. Adsorption properties of the p(HEMA-GMA)-IDA-Cr(III) SPMs were investigated under different conditions such as different initial dye concentrations and pH. The optimum pH was observed at 4.3 and the maximum adsorption capacity was determined as 885.14 mg/g at about 8000 ppm initial dye concentration. The concentrations of the dyes were determined using a UV/Vis Spectrophotometer at a wavelength of 435 nm. Reusability of p(HEMA-GMA)-IDA-Cr(III) SPMs was also shown for five adsorption-desorption cycles without considerable decrease in its adsorption capacity. Finally, the results showed that the metal-chelated p(HEMA-GMA)-IDA SPMs were effective sorbent systems removing acid dye from leather waste water.

Poly (hydroxyethylmethacrylate-co-methacryloyl glutamic acid) nanocarrier system for controlled release of levothyroxine.

The deterioration in the structure of thyroid hormones causes many thyroid-related disorders, which leads to a negative effect on the quality of life, as well as the change in metabolic rate. For the treatment of thyroid disorders, daily use of levothyroxine-based medication is essential. In the study, it is aimed to develop a polymeric nanocarrier that can provide controlled drug release of levothyroxine. In this respect, the p(HEMA-MAGA) nanopolymer was synthesized and then characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Zeta size analysis. The specific surface area of the nanopolymer was calculated as 587.68 m2/g. The pH, temperature, concentration, and time parameters were determined for levothyroxine binding to p(HEMA-MAGA) and optimum binding was determined as pH 7.4, 25 °C, 25 µg/mL concentration, and 30 min adsorption time. As a result of the release performed at pH 7.4, a release profile was observed which increased for the first 3 days and continued for 14 days. According to the results of MTT cell viability analysis, it was determined that the p(HEMA-MAGA) nanopolymeric carrier system had no cytotoxic effect. This developed polymer-based nanocarrier system is suitable for long-term and controlled release of levothyroxine. This is a unique and novel study in terms of developing poly hydroxyethylmethacrylate-co-methacryloyl glutamic acid-based polymeric nanoparticles for levothyroxine release.

Affinity-based nanoparticles were developed for long-term and controlled release of levothyroxine.p(HEMA-MAGA) nanopolymer was synthesized and characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Zeta size analysis.Optimization studies of levothyroxine binding into p(HEMA-MAGA) nanopolymers were carried out and controlled release studies were made with loading in optimum parameters.MTT cell viability analysis were performed for determining that the p(HEMA-MAGA) nanopolymeric carrier system had no cytotoxic effect.

Development of nanobiosensor for therapeutic drug monitoring in personalized cancer treatment approach.

Docetaxel is one of the most effective and safe chemotherapy drugs according to the World Health Organization, but its clinical use has been discontinued due to its various side effects. To reduce these side effects, the amount of docetaxel drug should be kept at the most effective level, it should be monitored in body fluids. Due to the limitations of traditional analytical methods used for this purpose, such as expensive and low sensitivity, labor-intensive and time-consuming complex preliminary preparation, efficient methods are required for the determination of the docetaxel level in the body. The increasing demand for the development of personalized therapy has recently spurred significant research into biosensors for the detection of drugs and other chemical compounds. In this study, an electrochemical-based portable nanobiosensor system was developed for the rapid, low-cost, and sensitive determination of docetaxel. In this context, mg-p(HEMA)-IMEO nanoparticles to be used as nanobiosensor bioactive layer was synthesized, characterized, and docetaxel determination conditions were optimized. According to the results obtained, the developed nanobiosensor system can detect docetaxel with a sensitivity of 2.22 mg/mL in a wide calibration range of 0.25-10 mg/mL, in only 15 min, in mixed media such as commercially available artificial blood serum and urine. determined. We concluded that the developed nanobiosensor system can be successfully used in routine drug monitoring as a low-cost biomedical device capable of direct, rapid, and specific drug determination within the scope of personalized treatment, providing point-of-care testing.

Therapeutic drug monitoring on-site has the potential to significantly save healthcare expenditures while also improving patient outcomes.Chromatography's applicability as a routine procedure is restricted by its lack of standardization, expensive equipment, lengthy turnaround times, and labor-intensive sample preparation.Overcoming these drawbacks, nanobiosensors provide an inexpensive, user-friendly, on-site analytical approach to fully explore the possibilities of therapeutic drug monitoring.

Affinity-Based Magnetic Nanoparticle Development for Cancer Stem Cell Isolation.

Cancer is still the leading cause of death in the world despite the developing research and treatment opportunities. Failure of these treatments is generally associated with cancer stem cells (CSCs), which cause metastasis and are defined by their resistance to radio- and chemotherapy. Although known stem cell isolation methods are not sufficient for CSC isolation, they also bring a burden in terms of cost. The aim of this study is to develop a high-efficiency, low-cost, specific method for cancer stem cell isolation with magnetic functional nanoparticles. This study, unlike the stem cell isolation techniques (MACS, FACS) used today, was aimed to isolate cancer stem cells (separation of CD133+ cells) with nanoparticles with specific affinity and modification properties. For this purpose, affinity-based magnetic nanoparticles were synthesized and characterized by providing surface activity and chemical reactivity, as well as making surface modifications necessary for both lectin affinity and metal affinity interactions. In the other part of the study, synthesized and characterized functional polymeric magnetic nanoparticles were used for the isolation of CSC from the human osteosarcoma cancer cell line (SAOS-2) with a cancer stem cell subpopulation bearing the CD133 surface marker. The success and efficiency of separation after stem cell isolation were evaluated via the MACS and FACS methods. As a result, when the His-graft-mg-p(HEMA) nanoparticle was used at a concentration of 0.1 µg/mL for 106 and 108 cells, superior separation efficiency to commercial microbeads was obtained.

Selective Extraction and Quantification of Hemoglobin Based on a Novel Molecularly Imprinted Nanopolymeric Structure of Poly(acrylamide-vinyl imidazole).

Imbalances in hemoglobin (Hb) levels can lead to conditions such as anemia or polycythemia, emphasizing the importance of precise Hb extraction from blood. To address this, a novel synthetic imprinted polymer was meticulously developed for capturing and separating Hb. Poly(acrylamide-vinylimidazole) nanopolymer (poly(AAm-VIM)) was synthesized using acrylamide and vinyl imidazole as functional monomers through surfactant-free emulsion polymerization. Characterization using FTIR, particle size, zeta potential, and SEM ensured the polymer's structure. The Hb-imprinted nanopolymer (Hb-poly(AAm-VIM)) demonstrated notable specificity, with a calculated Hb-specific adsorption value (Qmax) of 3.7377 mg/g in a medium containing 2.5 mg/mL Hb. The molecularly imprinted polymer (MIP) exhibited approximately 5 times higher Hb adsorption than the nonimprinted polymer (NIP). Under the same conditions, the imprinted nanopolymer displayed 2.39 and 2.17 times greater selectivity for Hb over competing proteins such as bovine serum albumin (BSA) and lysozyme (Lys), respectively. Also, SDS-PAGE analysis results confirmed the purification of Hb by the molecularly imprinted nanopolymer. These results underscore the heightened specificity and efficacy of the molecularly imprinted nanopolymer in selectively targeting Hb atoms among other proteins. Incorporating such polymers is justified by their notable affinity, cost-effectiveness, and facile production. This research contributes valuable insights into optimizing synthetic imprinted polymers for efficient Hb extraction, with potential in medical diagnostics and treatment applications.

Radiolabeling of new generation magnetic poly(HEMA-MAPA) nanoparticles with (131) I and preliminary investigation of its radiopharmaceutical potential using albino Wistar rats.

In this study, N-methacryloyl-l-phenylalanine (MAPA) containing poly(2-hydroxyethylmethacrylate) (HEMA)-based magnetic poly(HEMA-MAPA) nanobeads [mag-poly(HEMA-MAPA)] were radiolabeled with (131) I [(131) I-mag-poly(HEMA-MAPA)], and the radiopharmaceutical potential of (131) I-mag-poly(HEMA-MAPA) was investigated. Quality control studies were carried out by radiochromatographic method to be sure that (131) I binded to mag-poly(HEMA-MAPA) efficiently. In this sense, binding yield of (131) I-mag-poly(HEMA-MAPA) was found to be about 95-100%. In addition to this, optimum radiodination conditions for (131) I-mag-poly(HEMA-MAPA) were determined by thin-layer radiochromatography studies. In addition to thin-layer radiochromatography studies, lipophilicity (partition coefficient) and stability studies for (131) I-mag-poly(HEMA-MAPA) were realized. It was determined that lipophilicities of mag-poly(HEMA-MAPA) and (131) I-mag-poly(HEMA-MAPA) were 0.12 ± 0.01 and 1.79 ± 0.76 according to ACD/logP algorithm program, respectively. Stability of the radiolabeled compound was investigated in time intervals given as 0, 30, 60, 180, and 1440 min. It was found that (131) I-mag-poly(HEMA-MAPA) existed as a stable complex in rat serum within 60 min. After that, biodistribution and scintigraphy studies were carried out by using albino Wistar rats. It was determined that the most important (131) I activity uptake was observed in the breast, the ovary, and the pancreas. Scintigraphy studies well supported biodistribution results.

Polymeric nanoparticle-based electrochemical sensor for the detection of CA 125.

In this paper, Cys-graft-p(HEMA) nanomaterials and a new electrochemical method were developed for determination of CA 125. Cys-graft-p(HEMA) nanomaterials were synthesized with emulsion polymerization method and modified with grafting procedure. It was determined that Cys-graft-p(HEMA) nanomaterials had 50 nm dimension and spherical morphology, and per gram polymeric material contained 0.011 mmol L-cysteine. Electrode surface was prepared step by step for electrochemical analysis with optimization process. Linear determination range was determined as 5-400 U/mL (R= 0.9935). Detection limit (LOD) was calculated as 1.87 U/mL, and quantification limit (LOQ) was determined as 5.62 U/mL. The fabricated sensor system showed good repeatability, accuracy, reality, and storage stability. According to the results obtained, Cys-graft p(HEMA) nanomaterials that is used for the first time in biosensor has the potential to find use in the sector with rapid determination time (10 min), extensive determination range, accuracy of methods. Novelties of this study are rapid analysis, determination range, appropriate of prototype device development, and developing new designed material. Developed material and method can be used in the preliminary diagnosis of the disease and combined with a prototype device that can allow the follow-up of the treatment process in diagnosed patients.

Metal-Chelated Polymeric Nanomaterials for the Removal of Penicillin G Contamination.

We developed selective and relatively low-cost metal-chelated nanoparticle systems for the removal of the penicillin G (Pen G) antibiotic, presented for the first time in the literature. In the nanosystem, poly(glycidyl methacrylate) nanoparticles were synthesized by a surfactant-free emulsion polymerization method and covalently bound with a tridentate-chelating ligand, iminodiacetic acid, based on the immobilized metal chelate affinity technique. It was modified with Cu2+, a chelating metal, to make Pen G specific. Metal-chelated nanoparticles were characterized by Fourier-transform infrared spectroscopy, energy dispersive spectrometry, zeta dimensional analysis, and scanning electron microscopy technology. Optimization studies of the Pen G removal were conducted. As a result of this study, Pen G removal with the p(GMA)-IDA-Cu2+ nanoparticle reached its maximum adsorption capacity of 633.92 mg/g in the short time of 15 min. The Pen G adsorption of p(GMA)-IDA-Cu2+ was three times more than that of the p(GMA) nanoparticles and two times more than that of the ampicillin adsorption. In addition, there was no significant decrease in the adsorption capacity of Pen G resulting from the repeated adsorption-desorption process of metal-chelated nanoparticles over five cycles. The metal-chelated nanoparticle had an 84.5% ability to regain its ability to regenerate the product with its regeneration capability, making the widespread use of the system very convenient in terms of reducing cost, an important factor in removal processes.

L-glutamic acid-g-poly hydroxyethyl methacrylate nanoparticles: acute and sub-acute toxicity and biodistribution potential in mice.

The aim of this safety study in mice was to determine in vivo toxicity and biodistribution potential of a single and multiple doses of L-glutamic acid-g-p(HEMA) polymeric nanoparticles as a drug delivery system. The single dose did not cause any lethal effect, and its acute oral LD50 was >2.000 mg/kg body weight (bw). Multiple doses (25, 50, or 100 mg/kg bw) given over 28 days resulted in no significant differences in body and relative organ weights compared to control. These results are supported by biochemical and histological findings. Moreover, nanoparticle exposure did not result in statistically significant differences in micronucleus counts in bone marrow cells compared to control. Nanoparticle distribution was time-dependent, and they reached the organs and even bone marrow by hour 6, as established by ex vivo imaging with the IVIS® spectrum imaging system. In conclusion, L-glutamic acid-g-p(HEMA) polymeric nanoparticles appear biocompatible and have a potential use as a drug delivery system.

Green Carbon Dots: Synthesis, Characterization, Properties and Biomedical Applications.

Carbon dots (CDs) are a new category of crystalline, quasi-spherical fluorescence, "zero-dimensional" carbon nanomaterials with a spatial size between 1 nm to 10 nm and have gained widespread attention in recent years. Green CDs are carbon dots synthesised from renewable biomass such as agro-waste, plants or medicinal plants and other organic biomaterials. Plant-mediated synthesis of CDs is a green chemistry approach that connects nanotechnology with the green synthesis of CDs. Notably, CDs made with green technology are economical and far superior to those manufactured with physicochemical methods due to their exclusive benefits, such as being affordable, having high stability, having a simple protocol, and being safer and eco-benign. Green CDs can be synthesized by using ultrasonic strategy, chemical oxidation, carbonization, solvothermal and hydrothermal processes, and microwave irradiation using various plant-based organic resources. CDs made by green technology have diverse applications in biomedical fields such as bioimaging, biosensing and nanomedicine, which are ascribed to their unique properties, including excellent luminescence effect, strong stability and good biocompatibility. This review mainly focuses on green CDs synthesis, characterization techniques, beneficial properties of plant resource-based green CDs and their biomedical applications. This review article also looks at the research gaps and future research directions for the continuous deepening of the exploration of green CDs.

Impact of a Polymer-Based Nanoparticle with Formoterol Drug as Nanocarrier System In Vitro and in an Experimental Asthmatic Model.

The implementation of nanotechnology in pulmonary delivery systems might result in better and more specific therapy. Therefore, a nano-sized drug carrier should be toxicologically inert and not induce adverse effects. We aimed to investigate the responses of a polymer nano drug carrier, a lysine poly-hydroxyethyl methacrylate nanoparticle (NP) [Lys-p(HEMA)], loaded with formoterol, both in vitro and in vivo in an ovalbumin (OVA) asthma model. The successfully synthesized nanodrug formulation showed an expectedly steady in vitro release profile. There was no sign of in vitro toxicity, and the 16HBE and THP-1 cell lines remained vital after exposure to the nanocarrier, both loaded and unloaded. In an experimental asthma model (Balb/c mice) of ovalbumin sensitization and challenge, the nanocarrier loaded and unloaded with formoterol was tested in a preventive strategy and compared to treatment with the drug in a normal formulation. The airway hyperresponsiveness (AHR) and pulmonary inflammation in the bronchoalveolar lavage (BAL), both cellular and biochemical, were assessed. The application of formoterol as a regular drug and the unloaded and formoterol-loaded NP in OVA-sensitized mice followed by a saline challenge was not different from the control group. Yet, both the NP formulation and the normal drug application led to a more deteriorated lung function and increased lung inflammation in the OVA-sensitized and -challenged mice, showing that the use of the p(HEMA) nanocarrier loaded with formoterol needs more extensive testing before it can be applied in clinical settings.

Preparation of molecular imprinted hydrophobic polymeric nanoparticles having structural memories for lysozyme recognition.

This study is related to the preparation of lysozyme-imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-(L)-tyroptophan methylester) [nano-MIP] nanoparticles for purification of lysozyme. Nano-MIP particles were found to be 261 nm in diameter with a surface area of 1648 m(2)/g. According to the elemental analysis results, the particles contained 0.85 µmol MATrp/g polymer. The maximum lysozyme adsorption capacity was 1182.8 mg/g. Adsorbed lysozyme was desorbed with 94% recovery. It was observed that after five adsorption-desorption cycles there was no significant loss in adsorption capacity. In order to show the selectivity of the Lys-MIP nanoparticles, adsorption of lysozyme, bovine serum albumin (BSA), and cytochrome c were investigated.

Study of silanized nanostructures with immobilized fumarase for production of L-malate.

The conversion of fumaric acid into L-malate by fumarase immobilized on silanized nanostructures was analyzed experimentally. The enzyme was bound to the silanized nanostructures. We carried out scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR) analysis, zeta size analysis and surface area calculation for the characterization of the nanostructures. The effect of initial enzyme concentration and pH on immobilization procedure were investigated and the change of Michaelis-Menten constants (Km and Vmax) with immobilization was examined. The change in the storage stability of the enzyme by immobilization was also investigated. The stability of the immobilized enzyme was very good. We observed that the fumarase was bound to silanized nanostructures [p(HEMA)-3-MTES] in much greater amounts. We have compared the activities of free fumarase and immobilized fumarase and we have observed a significant increase in the activity of the fumarase after immobilization for L-malate production. Moreover, we came to the conclusion that this activity can be better preserved for 30 days compared to free fumarase.

Selective nanosensor based on folic acid imprinted nanostructures.

Folic acid, which provides the transfer of single carbon atoms in synthesis reactions and metabolic cycles in metabolism, is very important for metabolism. Folic acid also plays an important role in nucleotide synthesis and methylation reactions. There are many disorders caused by defective folic acid metabolism and lack of folic acid. Today, innovative, cost-effective methods are needed to develop folic acid determination methods. The main objective of this study is the development of surface-printed carbon electrodes (SPCE) modified with folic acid imprinted nanostructures (FA-Imp-poly(MPTS-rGO-co-NAT), which will be used for the first time for folic acid determination in commercially human blood serum. For this purpose, the synthesis of nanostructures has been carried out and characterized by FTIR, SEM-EDS, and AFM. Then, a new chemically modified nanosensor was fabricated for the determination of folic acid using folic acid imprinted nanostructures. Differential pulse voltammetry (DPV) and circular voltammetry (CV) methods were used as electrochemical methods in the FA-imprinted-nanosensor studies. Measurements in differential pulse voltammetry were performed at an application speed of 0.005 volts per second in the potential range of -0.4 to 0.6 volts. As a result of the circular voltammetric method, an idea about the surface was obtained with the voltammograms obtained. The detection limit (LOD) of the developed FA-imprinted-nanosensor was 7.54 ng/mL and the determination limit (LOQ) was 25.14 ng/mL. FA analytical (10 and 20 ng/mL) was added to commercial synthetic serum samples by the standard adding method and RSD values of 0.092% and 0.734% were found in the DPV technique and measurements respectively. This manuscript demonstrated a novel, simple, selective, and rapid FA-imprinted-nanosensor for determining the FA in the biological samples.

p(HEMA)-RR241 hydrogel membranes with micron network for IgG depletion in proteomic studies.

Serum proteins can generally be considered a good source for the illness' indication and are precious resources to detect diseases such as inflammation, cancer, diabetes, malnutrition, cardiovascular diseases, Alzheimer's, other autoimmune diseases, and infections. However, one of the biggest difficulties for proteomic studies is that the majority of serum protein mass consists of only a few proteins. Albumin and Immunoglobulin (IgG) constitute 80% of total serum protein. In this study, dye ligand affinity-based hydrogel membranes were proposed as new materials with micron mesh structures. Micron mesh p(HEMA) hydrogel membranes were synthesized by using the UV-photopolymerization method, then modified with Reactive Red 241 (RR241) dye ligand to increase the affinity towards IgG. Characterizations of synthesized micron mesh p(HEMA)-RR241 hydrogel membranes were also performed. It was demonstrated by the characterization studies that; the dye was successfully incorporated into the membrane structure with the amount of 119.38 mg/g. The hydrophilic property of the hydrogel membrane was demonstrated by swelling tests and the swelling value of dye modified membrane was found to be 8 times higher than that of the plain membrane. Micron network structure, as well as the porosity, were demonstrated with SEM/ESEM studies. Optimization of IgG adsorption conditions was also studied at different parameters (pH, temperature, ion strength, initial IgG concentration). Optimum pH, temperature, and ionic strength were found to be 6.5, 25 °C, 0.05 M, respectively, and the maximum IgG absorption value was 10.27 mg/g. Finally, it was shown that the proposed materials can be used repeatedly by 5 adsorption-desorption cycles.

Synthesis and Characterization of a New Cryogel Matrix for Covalent Immobilization of Catalase.

The advantages of cryogels for enzyme immobilization applications include their mechanical and chemical robustness, ease of production, superior porosity, and low cost. Currently, many researchers are exploring porous material-based systems for enzyme immobilization that are more efficient and economically viable. Here, poly(2-Hydroxyethyl methacrylate-co-allyl glycidyl ether) (p(HEMA-co-AGE)) cryogel matrices were synthesized via the free radical cryopolymerization method to be employed as the support material. For the immobilization of the catalase enzyme onto the p(HEMA-co-AGE) cryogel matrix (catalase@p(HEMA-co-AGE), the best possible reaction conditions were determined by altering parameters such as pH, catalase initial concentration, and flow rate. The maximum catalase immobilization amount onto the p(HEMA-co-AGE) cryogel was found to be 48 mg/g cryogel. To determine the advantages of the cryogel matrix, e.g., the stability and reusability of the cryogel matrix, the adsorption-desorption cycles for the catalase enzyme were repeated five times using the same cryogel matrix. At the end of the reusability tests, it was found that the cryogel was very stable and maintained its adsorption capacity with the recovery ratio of 93.8 ± 1.2%. Therefore, the p(HEMA-co-AGE) cryogel matrix affords repeated useability, e.g., up to five times, without decreasing its catalase binding capacities significantly and has promising potential for many industrial applications. Cryogels offer clear distinctive advantages over common materials, e.g., micro/nano particles, hydrogels, films, and composites for these applications. At present, many researchers are working on the design of more effective and economically feasible, porous material-based systems for enzyme immobilization.

Novel Polymeric Nanomaterial Based on Poly(Hydroxyethyl Methacrylate-Methacryloylamidophenylalanine) for Hypertension Treatment: Properties and Drug Release Characteristics.

In this study, a novel polymeric nanomaterial was synthesized and characterized, and it its potential usability in hypertension treatment was demonstrated. For these purposes, a poly(hydroxyethyl methacrylate-methacryloylamidophenylalanine)-based polymeric nanomaterial (p(HEMPA)) was synthesized using a mini-emulsion polymerization technique. The nanomaterials were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and zeta size analysis. The synthesized p(HEMPA) nanomaterial had a diameter of about 113 nm. Amlodipine-binding studies were optimized by changing the reaction conditions. Under optimum conditions, amlodipine's maximum adsorption value (Qmax) of the p(HEMPA) nanopolymer was found to be 145.8 mg/g. In vitro controlled drug release rates of amlodipine, bound to the nanopolymer at the optimum conditions, were studied with the dialysis method in a simulated gastrointestinal system with pH values of 1.2, 6.8 and 7.4. It was found that 99.5% of amlodipine loaded on the nanomaterial was released at pH 7.4 and 72 h. Even after 72 h, no difference was observed in the release of AML. It can be said that the synthesized nanomaterial is suitable for oral amlodipine release. In conclusion, the synthesized nanomaterial was studied for the first time in the literature as a drug delivery system for use in the treatment of hypertension. In addition, AML-p(HEMPA) nanomaterials may enable less frequent drug uptake, have higher bioavailability, and allow for prolonged release with minimal side effects.

Synthesis, characterization and toxicity assessment of a new polymeric nanoparticle, l-glutamic acid-g-p(HEMA).

The toxic effects of poly(HEMA)-based polymeric nanoparticles must be analyzed before their biomedical applications as drug delivery systems. The aim of the study was to characterize and evaluate the toxicity for its biocompatibility of a newly synthesized l-glutamic acid-g-p(HEMA) polymeric nanoparticle The nanoparticle was synthesized with surfactant-free emulsion polymerization and grafting techniques. Grafting efficiency was estimated at 58%. The nanoparticle shape was verified as nearly spherical by scanning electron microscopy. Atomic force microscopy images showed a rough surface topography. The nanoparticle had an average size of ~194.6 nm on zeta analysis, and the zeta potential value was -18 mV. Fourier transformed infrared spectroscopy revealed spectra from 750 to 4000 cm-1 and characteristic peaks of stretching bands. The swelling ratio was 46%. With 24-h exposure, p(HEMA) and l-glutamic acid-g-p(HEMA) did not have cytotoxic effects on a human bronchial epithelial cell line (16HBE) and human monocyte cell line by water-soluble tetrazolium salt 1 (WST-1) assay and lactate dehydrogenase assay (LDH). It did not show genotoxic potential by comet assay and did not have mutagenic effects on Salmonella typhimurium TA98, TA100, TA1535 and TA1537 strains by Ames test. The nanoparticle at 160 µg/ml showed 2% hemolytic activity on erythrocytes. On cell migration assay, the percentage closure difference between exposed and control cells was estimated at 21%. We found no irritation effect on Hen's egg test-chorioallantoic membrane test. We determined that the polymeric nanoparticle l-glutamic acid-g-p(HEMA) was biocompatible and has potential for use in a drug delivery system.