The effect of pectin on swelling and permeability characteristics of free films containing Eudragit RL and/or RS as a coating formulation aimed for colonic drug delivery.

BACKGROUND AND THE PURPOSE OF THE STUDY: The potential of pectin as a bacterially degradable polysaccharide for colon drug delivery has been demonstrated. Due to the high solubility and swelling properties of pectin in aqueous media, it is frequently used in combination with water insoluble polymers for targeting drugs to the colon. The aim of this study was to evaluate free films containing pectin as a bacterially-degradable polysaccharide in combination with Eudragit RL (ERL) and/or RS (ERS) as a coating formulation for colonic drug delivery. METHODS: Isolated free films comprising 20% pectin and 80% ERL or ERS and their combination in 1:1 ratio were prepared by casting method. Then, free films were evaluated by water vapor transmission (WVT), swelling and permeability experiments for theophylline and indomethacin in different media. RESULTS: Formulations containing ERL exhibited higher WVT, swelling and permeability compared with formulations containing ERS. The permeability of theophylline through free films composed of pectin and eudragit polymers in simulated colonic media was not significantly different from those obtained in other media. However indomethacin free films containing pectin and ERL showed higher permeation in simulated colonic fluid (SCF) compared to the other media. MAJOR CONCLUSION: Formulation containing pectin and ERL may be suitable as a coating formulation for colon targeted delivery of drugs of low solubility such as indomethacin.

Permeability and swelling studies on free films containing inulin in combination with different polymethacrylates aimed for colonic drug delivery.

The aim of this study was to assess some permeability and swelling characteristics of free films prepared by combination of inulin as a bacterially degradable system and time- or pH-dependent polymers as a coating formulation for colonic drug delivery. Different free films were prepared by casting and solvent evaporation method. Formulations containing inulin with Eudragit RS, Eudragit RL, Eudragit RS-Eudragit RL, Eudragit FS and Eudragit RS-Eudragit S with different ratios of inulin were prepared. After preparation, free films were evaluated by water vapor transmission test, swelling experiment and permeability to indomethacin and theophylline in different media. Formulations containing Eudragit FS had high resistance to water vapor permeation; but were unable to protect premature swelling and drug release in simulated small intestine media. Also, combination of Eudragit RS and Eudragit S had no suitable characteristics for colon delivery. However, Eudragit RS and Eudragit RL in combination with inulin made free films which had more swelling and permeation of drug in the colonic medium rather than the other media. It was shown that formulations containing sustained release polymethacrylates in combination with inulin have more potential as a coating system for specific colon delivery compared with pH-dependent polymers.

Combination of time-dependent and pH-dependent polymethacrylates as a single coating formulation for colonic delivery of indomethacin pellets.

The objective of this study was to evaluate the combination of pH-dependent and time-dependent polymers as a single coating for design of colon delivery system of indomethacin pellets. Eudragit S100 and Eudragit L100 were used as pH-dependent polymers and Eudragit RS was used as a time-dependent polymer. A statistical full factorial design was used in order to optimize formulations. Factors studied in design were percent of Eudragit RS in combination with Eudragit S and L and coating level. Dissolution studies of pellets in the media with different pH (1.2, 6.5, 6.8 and 7.2) showed that drug release in colon could be controlled by addition of Eudragit RS to the pH-dependent polymers. The lag time prior to drug release was highly affected by coating level. With combination of two factors, i.e. the percent of Eudragit RS and coating level, the optimum formulation was found to be the one containing 20% Eudragit RS, 64% Eudragit S and 16% Eudragit L, and a coating level of 10%. This formulation was reproduced and tested in continuous condition of dissolution, and also separately at pH 7.5. The results of in vitro experiments indicate that the proposed combined time-dependent and pH-dependent polymethacrylate polymer coating may provide a colonic delivery system for indomethacin.

Statistical optimization of indomethacin pellets coated with pH-dependent methacrylic polymers for possible colonic drug delivery.

The objective of this study was to evaluate the effect of two factors (ratio of Eudragit S100 and Eudragit L100 and the coating level) on indomethacin release from pellets in order to optimize coating formulations for colonic delivery. Coating formulations were designed based on the full factorial design. Two independent variables were the ratio of Eudragit S100:Eudragit L100 (1:4, 1:1 and 1:0) and the level of coating (10%, 15% and 20%, w/w), respectively. The evaluated responses were lag time prior to drug release at pH 6.8 (the time required for drug release up to 2%) and percent of drug release at pH 6.8 in 5h. Polymers were coated onto the pellets containing 20% (w/w) indomethacin, using a fluidized bed coating apparatus. Dissolution test was carried out in media with different pH (1.2, 6.5, 6.8 and 7.2). The dissolution data revealed that the level of coating and the ratio of polymers are very important to achieve optimum formulation. Using responses and resulted statistical equations, optimum formulation consisted of Eudragit S100:L100 in 4:1 ratio and the level of coating (20%) was predicted. Practical results showed that the pellets prepared according to above formulation released no indomethacin at pH 1.2 (simulating stomach pH) and pH 6.5 (simulating proximal part of small intestine pH); drug release was slowly at pH 6.8 (simulating lower part of small intestine pH), but it was fast at pH 7.2 (simulating terminal ileum pH). The results of this study revealed that factorial design is a suitable tool for optimization of coating formulations to achieve colon delivery. It was shown that coating formulation consisted of Eudragit S100:Eudragit L100 in 4:1 ratio at 20% coating level has potential for colonic delivery of indomethacin loaded pellets. The optimized formulation produced dissolution profiles that were close to predicted values.

Preparation and evaluation of pellets using acacia and tragacanth by extrusion-spheronization.

BACKGROUND AND THE PURPOSE OF THE STUDY: Extrusion-spheronization is an established technique for the production of pellets for pharmaceutical applications. In this study, the feasibility and influence of the incorporation of acacia, by itself and in combination with tragacanth, on the ability of formulations containing 2 model of drugs (ibuprofen and theophylline) to form spherical pellets by extrusion-spheronization was investigated. MATERIAL AND METHODS: Formulations containing different ratios of acacia and tragacanth (8:2, 9:1, and 10:0) and different drug concentrations (20%, 40%, and 60%) were prepared, on the basis of a 3(2) full factorial design. Pellet properties, such as aspect ratio, sphericity (image analysis), crushing strength and elastic modulus (mechanical tests), mean dissolution time, and dissolution profiles were evaluated. The effect of particular factors on responses was determined by linear regression analysis. RESULTS: The sphericity, drug release rate, and the mechanical properties of the pellets were affected by the amounts and types of the drugs, and the ratio of the gums. Acacia, relative to tragacanth, produced pellets with higher mechanical strength and a faster drug release rate. Addition of small amounts of tragacanth to ibuprofen formulations resulted in matrix pellets with slow drug release. CONCLUSION: The results showed that acacia and tragacanth can be used successfully as 2 natural binders in the pellet formulations.