RESUMEN
Essential oils are volatile oil-like liquids with a characteristic strong smell and taste. They are formed in plants and are then extracted. Essential oils have extremely strong physiological and pharmacological properties, which are used in the medicine, cosmetics, and food industries. In this study, the molecules caryophyllene oxide, ß-pinene, 1,8-cineol, α-cubebene, and ß-caryophyllene, which are the molecules with the highest contents in the essential oil of the plant mentioned in the title, were selected and theoretical calculations describing their interactions with water were performed. Because oil-water mixtures are very important in biology and industry and are ubiquitous in nature, quantum chemical calculations for binary mixtures of water with caryophyllene oxide, ß-pinene, 1,8-cineol, α-cubebene, and ß-caryophyllene were performed using the density functional theory (DFT)/B3LYP method with a basis of 6-31 G (d, p). Molecular structures, HOMO-LUMO energies, electronic properties, reactivity (ELF, LOL, and Fukui), and NCI-RDG and molecular electrostatic potential (MEP) on surfaces of the main components of Phlomis bruguieri Desf. essential oil were calculated and described.
RESUMEN
The physicochemical properties of binary systems are of great importance for the application of the latter. We report on the investigation of an ammonium sulfamate-urea binary system with different component ratios using a combination of experimental (FTIR, XRD, TGA/DSC, and melting point) and theoretical (DFT, QTAIM, ELF, RDG, ADMP, etc.) techniques. It is shown that, at a temperature of 100 °C, the system under study remains thermally and chemically stable for up to 30 min. It was established using X-ray diffraction analysis that the heating time barely affects the X-ray characteristics of the system. Data on the aggregate states in specified temperature ranges were obtained with thermal analysis and determination of the melting point. The structures of the ammonium sulfamate-urea system with different component ratios were optimized within the density functional theory. The atom-centered density matrix propagation calculation of the ammonium sulfamate-urea system with different component ratios was performed at temperatures of 100, 300, and 500 K. Regardless of the component ratio, a regular increase in the potential energy variation (curve amplitude) with an increase in temperature from 100 to 500 K was found.
RESUMEN
Betulin is an important triterpenoid substance isolated from birch bark, which, together with its sulfates, exhibits important bioactive properties. We report on a newly developed method of betulin sulfation with sulfamic acid in pyridine in the presence of an Amberlyst®15 solid acid catalyst. It has been shown that this catalyst remains stable when being repeatedly (up to four cycles) used and ensures obtaining of sulfated betulin with a sulfur content of ~10%. The introduction of the sulfate group into the betulin molecule has been proven by Fourier-transform infrared, ultraviolet-visible, and nuclear magnetic resonance spectroscopy. The Fourier-transform infrared (FTIR) spectra contain absorption bands at 1249 and 835-841 cm-1; in the UV spectra, the peak intensity decreases; and, in the nuclear magnetic resonance (NMR) spectra, of betulin disulfate, carbons С3 and С28 are completely shifted to the weak-field region (to 88.21 and 67.32 ppm, respectively) with respect to betulin. Using the potentiometric titration method, the product of acidity constants K1 and K2 of a solution of the betulin disulfate H+ form has been found to be 3.86 × 10-6 ± 0.004. It has been demonstrated by the thermal analysis that betulin and the betulin disulfate sodium salt are stable at temperatures of up to 240 and 220 °C, respectively. The density functional theory method has been used to obtain data on the most stable conformations, molecular electrostatic potential, frontier molecular orbitals, and mulliken atomic charges of betulin and betulin disulfate and to calculate the spectral characteristics of initial and sulfated betulin, which agree well with the experimental data.
Asunto(s)
Ácidos Sulfónicos/química , Triterpenos/química , Catálisis , Teoría Funcional de la Densidad , Conformación Molecular , Estructura Molecular , Teoría Cuántica , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
This study aims to experimentally and theoretically examine the plant Aethionema sancakense, which was determined as a new species and whose essential oil and fatty acid compositions were characterized by GC/GC-MS technique. Linoleic acid (23.1%), α-humulene (19.8%), camphene (13.9%), and heptanal (9.7%) were found to be the major essential oil components of A. sancakense aerial part structures. The quantum chemical calculations of these four molecules that are very important to this plant were performed using the density functional method (DFT)/B3LYP with the 6-31 G (d, p) basis set in the ground state for the gas phase. The molecular structures, HOMO-LUMO energies, electronic properties, Fukui functions, and molecular electrostatic potential (MEP) surfaces of the major constituents of Aethionema sancakense essential oil were calculated and interpreted. Finally, the RDG-NCI analysis of these molecules was performed to determine the non-covalent interactions present within the molecules.
Asunto(s)
Aceites Volátiles , Espectrometría Raman , Monoterpenos Bicíclicos , Ácido Linoleico , Modelos Moleculares , Conformación Molecular , Teoría Cuántica , Espectrofotometría Ultravioleta , Espectroscopía Infrarroja por Transformada de Fourier , Electricidad Estática , Termodinámica , VibraciónRESUMEN
Imidazole derivatives have found wide application in organic and medicinal chemistry. In particular, benzimidazoles have proven biological activity as antiviral, antimicrobial, and antitumor agents. In this work, we experimentally and theoretically investigated N-Butyl-1H-benzimidazole. It has been shown that the presence of a butyl substituent in the N position does not significantly affect the conjugation and structural organization of benzimidazole. The optimized molecular parameters were performed by the DFT/B3LYP method with 6-311++G(d,p) basis set. This level of theory shows excellent concurrence with the experimental data. The non-covalent interactions that existed within our compound N-Butyl-1H-benzimidazole were also analyzed by the AIM, RDG, ELF, and LOL topological methods. The color shades of the ELF and LOL maps confirm the presence of bonding and non-bonding electrons in N-Butyl-1H-benzimidazole. From DFT calculations, various methods such as molecular electrostatic potential (MEP), Fukui functions, Mulliken atomic charges, and frontier molecular orbital (HOMO-LUMO) were characterized. Furthermore, UV-Vis absorption and natural bond orbital (NBO) analysis were calculated. It is shown that the experimental and theoretical spectra of N-Butyl-1H-benzimidazole have a peak at 248 nm; in addition, the experimental spectrum has a peak near 295 nm. The NBO method shows that the delocalization of the aσ-electron from σ (C1-C2) is distributed into antibonding σ* (C1-C6), σ* (C1-N26), and σ* (C6-H11), which leads to stabilization energies of 4.63, 0.86, and 2.42 KJ/mol, respectively. Spectroscopic investigations of N-Butyl-1H-benzimidazole were carried out experimentally and theoretically to find FTIR vibrational spectra.
Asunto(s)
Teoría Cuántica , Espectrometría Raman , Espectroscopía Infrarroja por Transformada de Fourier , Modelos Moleculares , Bencimidazoles/químicaRESUMEN
CONTEXT: Oligothiophenes have long been used as model compounds to understand the chemistry of polythiophenes. Herein, we have some quantum chemical calculations and intra- and inter-molecular interaction calculations of a series of oligothiophenes such as terthiophene, quintetthiophene, sevensthiophene, terthiophene-terthiophene, terthiophene-water, terthiophene-methanol, and terthiophene-chloroform performed by time-dependent density functional theory (TD-DFT), density functional theory (DFT), and Multiwfn: a multifunctional wavefunction analyzer. The UV-vis spectra, HOMO-LUMO energies, NBO analysis, MEP, molecular structures, and electronic properties were computed using DFT/TD-DFT at the level of B3LYP/6-31+ G (d,p) and described. The nature of molecular interactions between terthiophene and solvents like water, methanol, and chloroform were also investigated using non-covalent interaction index (NCI), reduced density gradient (RDG), localized orbital locator (LOL), and electron localization function (ELF) topological analyses. Besides, Fukui functions and energy of population density-of-states were computed using the same method. The calculation results show that there are some changes in the terthiophene with the addition of solvent to the medium. METHODS: DFT calculations were performed using the Gaussian 09 software and GaussView 5.0 visulation program. Multiwfn software is used to calculate the reduced density gradient (RDG) scatterplots, non-covalent interactions (NCI), ELF, LOL, Fukui analysis, and energy of population density-of-states of oligothiophenes.
RESUMEN
The hexachlorocyclotriphosphaze compound (N3P3Cl6, HCCP) was reacted with excess (E)-(1-(4'-oxyphenyl)-3-(substituted-phenyl)prop-2-en-1-ones (2-11) to produce hexakis[(1-(4-oxyphenyl)-3-(substituted-phenyl)prop-2-en-1-one)]cyclotriphosphazenes (CP 2-11). The structures of products (CP 2-11) were confirmed using elemental analysis, FT-IR, MS spectral analysis as well as 31P, 1H and 13C-APT NMR techniques and their thermal properties determined by TGA and DSC techniques. The HOMO-LUMO energy gap and chemical reactivity identifiers were calculated and HOMO and LUMO images were viewed. According to the calculations, all the chemical potential values of CP 2-11 are negative and it shown that the molecules are stable. The in vitro cytotoxic of CP 2-11 investigated and their activity potentials were evaluated by molecular docking studies with Autodock Vina softwares. CP 2-11 compounds were found to demonstrate cytotoxic activity against human cancer cell lines (A2780, LNCaP and PC-3). The CP 2-11 compounds reduced the cell viability against all cancer cell lines in the range 36%-90% especially. The results showed that these compounds are powerful candidate molecules for pharmaceutical applications.
Asunto(s)
Antineoplásicos , Neoplasias Ováricas , Antineoplásicos/química , Antineoplásicos/farmacología , Línea Celular Tumoral , Femenino , Humanos , Simulación del Acoplamiento Molecular , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Soda lignin is a by-product of the soda process for producing cellulose from grassy raw materials. Since a method for the industrial processing of lignin of this type is still lacking, several research teams have been working on solving this problem. We first propose a modification of soda lignin with sulfamic acid over solid catalysts. As solid catalysts for lignin sulfation, modified carbon catalysts (with acid sites) and titanium and aluminum oxides have been used. In the elemental analysis, it is shown that the maximum sulfur content (16.5 wt%) was obtained with the Sibunit-4® catalyst oxidized at 400 °C. The incorporation of a sulfate group has been proven by the elemental analysis and Fourier-transform infrared spectroscopy. The molecular weight distribution has been examined by gel permeation chromatography. It has been demonstrated that the solid catalysts used in the sulfation process causes hydrolysis reactions and reduces the molecular weight and polydispersity index. It has been established by the thermal analysis that sulfated lignin is thermally stabile at temperatures of up to 200 °C. According to the atomic force microscopy data, the surface of the investigated film consists of particles with an average size of 50 nm. The characteristics of the initial and sulfated ß-O-4 lignin model compounds have been calculated and recorded using the density functional theory.
RESUMEN
The synthesis of guar gum sulfates by a complex of sulfur trioxide with 1,4-dioxane was studied. The influence of temperature, process duration, and the volume of chlorosulfonic acid on the degree of substitution of guar gum sulfates was studied. The sulfation process has been optimized using the Box-Behnken design. It was shown that the optimal conditions for sulfation of guar gum with a complex of sulfur trioxide-1.4-dioxane: temperature 60 °C, duration 2.9 h, and a volume of chlorosulfonic acid of 3.1 ml. Sulfate groups embedding into the structure of guar gum was confirmed by elemental analysis and FTIR. The initial and sulfated guar gum were also characterized by methods: X-ray diffraction, scanning electron microscopy, and gel permeation chromatography. Using X-ray diffraction, it was shown that amorphization of guar gum occurs during sulfation. Using scanning electron microscopy, it was shown that the morphology of guar gum changes in the process of sulfation. Using gel permeation chromatography, it was shown in the process of guar gum sulfation by a complex of sulfur trioxide with 1,4-dioxane, the molecular weight decreases from 600 to 176 kDa. The geometric parameters of all complexes were carried out by using the DFT/B3PW91 method with a 6-31 + G (d,p) basis set. These structures are optimized to predict the important properties of a theme. MEP with contour map has been performed to obtain the electronic properties. Frontier molecular orbital HOMO-LUMO orbital diagram has been obtained for different energy levels and their band gap energies have been computed.
RESUMEN
Sulfated cellulose derivatives are biologically active substances with anticoagulant properties. In this study, a new sulfated diethylaminoethyl (DEAE)-cellulose derivative has been obtained. The effect of a solvent on the sulfation process has been investigated. It is shown that 1,4-dioxane is the most effective solvent, which ensures the highest sulfur content in DEAE-cellulose sulfate under sulfamic acid sulfation. The processes of sulfamic acid sulfation in the presence of urea in 1,4-dioxane and in a deep eutectic solvent representing a mixture of sulfamic acid and urea have been compared. It is demonstrated that the use of 1,4-dioxane yields the sulfated product with a higher sulfur content. The obtained sulfated DEAE-cellulose derivatives have been analyzed by Fourier transform infrared spectroscopy, X-ray diffractometry, and scanning electron and atomic force microscopy, and the degree of their polymerization has been determined. The introduction of a sulfate group has been confirmed by the Fourier transform infrared spectroscopy data; the absorption bands corresponding to sulfate groups have been observed in the ranges of 1247-1256 and 809-816 cm-1. It is shown that the use of a deep eutectic solvent leads to the side carbamation reactions. Amorphization of DEAE-cellulose during sulfation has been demonstrated using X-ray diffractometry. The geometric structure of a molecule in the ground state has been calculated using the density functional theory with the B3LYP/6-31G(d, p) basis set. The reactive areas of DEAE-cellulose and its sulfated derivatives have been analyzed using molecular electrostatic potential maps. The thermodynamic parameters (heat capacity, entropy, and enthalpy) of the target sulfation products have been determined. The HOMO-LUMO energy gap, Mulliken atomic charges, and electron density topology of the title compound have been calculated within the atoms in molecule theory.
RESUMEN
This study aims to experimentally and theoretically examine the nature and energy of intermolecular bond interactions between thiourea and water molecules using natural bond orbital (NBO), non-linear optical (NLO), atoms in molecules (AIM), and reduced density gradient (RDG) analyses based on the quantum chemical approach and spectroscopic analysis on X-ray and FTIR. Geometry optimizations of Thio-(H2O)1-5 complexes were carried out in the gas phase by B3LYP/6-311++G(d,p) level of density functional theory. The nature of the molecular interactions between the water and thiourea through hydrogen bonding has been investigated using RDG and AIM methods. NBO analysis shows that the Thio-(H2O)5 complex has higher stabilization energy values than the other complexes. The non-linear optical properties, such as dipole moment (µ), the polarizability (α0), and the first hyperpolarizability (ßtot), and thermodynamic functions, such as entropy (S), specific heat capacity (Cv), and thermal energy (E), were calculated using the same method. It was observed that thermodynamic parameters, polarizability, and the first hyperpolarizability increased with the number of water molecules. X-ray diffraction analysis confirmed that thiourea is single crystal, and the thiourea/water complexes are crystalline in nature. Besides, the infrared spectrum shows the existence of water molecules and it is used to get details of the structure of the complex.