Load-dependent extracellular matrix organization in atrioventricular heart valves: differences and similarities.

The extracellular matrix of the atrioventricular (AV) valves' leaflets has a key role in the ability of these valves to properly remodel in response to constantly varying physiological loads. While the loading on mitral and tricuspid valves is significantly different, no information is available on how collagen fibers change their orientation in response to these loads. This study delineates the effect of physiological loading on AV valves' leaflets microstructures using Second Harmonic Generation (SHG) microscopy. Fresh natural porcine tricuspid and mitral valves' leaflets (n = 12/valve type) were cut and prepared for the experiments. Histology and immunohistochemistry were performed to compare the microstructural differences between the valves. The specimens were imaged live during the relaxed, loading, and unloading phases using SHG microscopy. The images were analyzed with Fourier decomposition to mathematically seek changes in collagen fiber orientation. Despite the similarities in both AV valves as seen in the histology and immunohistochemistry data, the microstructural arrangement, especially the collagen fiber distribution and orientation in the stress-free condition, were found to be different. Uniaxial loading was dependent on the arrangement of the fibers in their relaxed mode, which led the fibers to reorient in-line with the load throughout the depth of the mitral leaflet but only to reorient in-line with the load in deeper layers of the tricuspid leaflet. Biaxial loading arranged the fibers in between the two principal axes of the stresses independently from their relaxed states. Unlike previous findings, this study concludes that the AV valves' three-dimensional extracellular fiber arrangement is significantly different in their stress-free and uniaxially loaded states; however, fiber rearrangement in response to the biaxial loading remains similar.

A Tri-Leaflet Nitinol Mesh Scaffold for Engineering Heart Valves.

The epidemiology of valvular heart disease has significantly changed in the past few decades with aging as one of the main contributing factors. The available options for replacement of diseased valves are currently limited to mechanical and bioprosthetic valves, while the tissue engineered ones that are under study are currently far from clinical approval. The main problem with the tissue engineered heart valves is their progressive deterioration that leads to regurgitation and/or leaflet thickening a few months after implantation. The use of bioresorbable scaffolds is speculated to be one factor affecting these valves' failure. We have previously developed a non-degradable superelastic nitinol mesh scaffold concept that can be used for heart valve tissue engineering applications. It is hypothesized that the use of a non-degradable superelastic nitinol mesh may increase the durability of tissue engineered heart valves, avoid their shrinkage, and accordingly prevent regurgitation. The current work aims to study the effects of the design features on mechanical characteristics of this valve scaffold to attain proper function prior to in vivo implantation.

On the Mechanics of Transcatheter Aortic Valve Replacement.

Transcatheter aortic valves (TAVs) represent the latest advances in prosthetic heart valve technology. TAVs are truly transformational as they bring the benefit of heart valve replacement to patients that would otherwise not be operated on. Nevertheless, like any new device technology, the high expectations are dampened with growing concerns arising from frequent complications that develop in patients, indicating that the technology is far from being mature. Some of the most common complications that plague current TAV devices include malpositioning, crimp-induced leaflet damage, paravalvular leak, thrombosis, conduction abnormalities and prosthesis-patient mismatch. In this article, we provide an in-depth review of the current state-of-the-art pertaining the mechanics of TAVs while highlighting various studies guiding clinicians, regulatory agencies, and next-generation device designers.

A Hybrid Tissue-Engineered Heart Valve.

PURPOSE: This study describes the efforts to develop and test the first hybrid tissue-engineered heart valve whose leaflets are composed of an extra-thin superelastic Nitinol mesh tightly enclosed by uniform tissue layers composed of multiple cell types. DESCRIPTION: The trileaflet Nitinol mesh scaffolds underwent three-dimensional cell culture with smooth muscle and fibroblast/myofibroblast cells enclosing the mesh, which were finally covered by an endothelial cell layer. EVALUATION: Quantitative and qualitative assays were performed to analyze the microstructure of the tissues. A tissue composition almost similar to that of natural heart valve leaflets was observed. The function of the valves and their Nitinol scaffolds were tested in a heart flow simulator that confirmed the trileaflet valves open and close robustly under physiologic flow conditions with an effective orifice area of 75%. The tissue-metal attachment of the leaflets once exposed to physiologic flow rates was tested and approved. CONCLUSIONS: Our preliminary results indicate that the novel hybrid approach with nondegradable scaffold for engineering heart valves is viable and may address the issues associated with current tissue-engineered valves developed with degradable scaffolds.

Emerging trends in heart valve engineering: Part III. Novel technologies for mitral valve repair and replacement.

In this portion of an extensive review of heart valve engineering, we focus on the current and emerging technologies and techniques to repair or replace the mitral valve. We begin with a discussion of the currently available mechanical and bioprosthetic mitral valves followed by the rationale and limitations of current surgical mitral annuloplasty methods; a discussion of the technique of neo-chordae fabrication and implantation; a review the procedures and clinical results for catheter-based mitral leaflet repair; a highlight of the motivation for and limitations of catheter-based annular reduction therapies; and introduce the early generation devices for catheter-based mitral valve replacement.

Emerging trends in heart valve engineering: Part I. Solutions for future.

As the first section of a multi-part review series, this section provides an overview of the ongoing research and development aimed at fabricating novel heart valve replacements beyond what is currently available for patients. Here we discuss heart valve replacement options that involve a biological component or process for creation, either in vitro or in vivo (tissue-engineered heart valves), and heart valves that are fabricated from polymeric material that are considered permanent inert materials that may suffice for adults where growth is not required. Polymeric materials provide opportunities for cost-effective heart valves that can be more easily manufactured and can be easily integrated with artificial heart and ventricular assist device technologies. Tissue engineered heart valves show promise as a regenerative patient specific model that could be the future of all valve replacement. Because tissue-engineered heart valves depend on cells for their creation, understanding how cells sense and respond to chemical and physical stimuli in their microenvironment is critical and therefore, is also reviewed.

Emerging trends in heart valve engineering: Part II. Novel and standard technologies for aortic valve replacement.

The engineering of technologies for heart valve replacement (i.e., heart valve engineering) is an exciting and evolving field. Since the first valve replacement, technology has progressed by leaps and bounds. Innovations emerge frequently and supply patients and physicians with new, increasingly efficacious and less invasive treatment options. As much as any other field in medicine the treatment of heart valve disease has experienced a renaissance in the last 10 years. Here we review the currently available technologies and future options in the surgical and transcatheter treatment of aortic valve disease. Different valves from major manufacturers are described in details with their applications.

The effects of transcatheter valve crimping on pericardial leaflets.

BACKGROUND: Transcatheter aortic valve replacement has emerged as a promising therapy for treatment of severe aortic stenosis. Although it has been shown that these valves can be safely delivered and implanted, studies of valve longevity are lacking because of the infancy of the technology. Particularly, the effects of stent crimping on the valve's leaflets have not yet been sufficiently investigated. In this study, we have characterized the effects of crimping on pericardial leaflets in time and through the depth of the tissue. METHODS: To test the structural changes at the surface and deep layers of bovine pericardial leaflets, scanning electron microscopy and second-harmonic generation microscopy were used. An uncrimped tissue sample was imaged, followed by imaging a segment of tissue after crimping in a stented transcatheter valve, immediately after, at 20 minutes, and 60 minutes after crimping. The crimping experiment was performed for multiple crimping sizes (ie, 14F, 16F, and 18F). We defined a damage index that quantifies the level of leaflet structural changes as a result of crimping. RESULTS: Based on the calculated damage indices and analyses of the raw images, it was determined that crimping does measurable damage to the leaflet tissue that persists with time. CONCLUSIONS: Significant tissue damage was observed at the surface layers of the leaflets. In the deeper tissue layers, damage was substantial for 14F crimping; however, it became less significant but still visible for larger collapse profiles. Crimping may induce substantial structural damage to pericardial leaflets that does not improve with time.

Inflammatory response assessment of a hybrid tissue-engineered heart valve leaflet.

Despite substantial research in the past few decades, only slight progress has been made toward developing biocompatible, tissue-engineered scaffolds for heart valve leaflets that can withstand the dynamic pressure inside the heart. Recent progress on the development of hybrid scaffolds, which are composed of a thin metal mesh enclosed by multi-layered tissue, appear to be promising for heart valve engineering. This approach retains all the advantages of biological scaffolds while developing a strong extracellular matrix backbone to withstand dynamic loading. This study aims to test the inflammatory response of hybrid tissue-engineered leaflets based on characterizing the activation of macrophage cells cultured on the surfaces of the tissue construct. The results indicate that integration of biological layers around a metal mesh core-regardless of its type-may reduce the evoked inflammatory responses by THP-1 monocyte-like cells. This observation implies that masking a metal implant within a tissue construct prior to implantation can hide it from the immune system and may improve the implant's biocompatibility.

Characterizing the collagen fiber orientation in pericardial leaflets under mechanical loading conditions.

When implanted inside the body, bioprosthetic heart valve leaflets experience a variety of cyclic mechanical stresses such as shear stress due to blood flow when the valve is open, flexural stress due to cyclic opening and closure of the valve, and tensile stress when the valve is closed. These types of stress lead to a variety of failure modes. In either a natural valve leaflet or a processed pericardial tissue leaflet, collagen fibers reinforce the tissue and provide structural integrity such that the very thin leaflet can stand enormous loads related to cyclic pressure changes. The mechanical response of the leaflet tissue greatly depends on collagen fiber concentration, characteristics, and orientation. Thus, understating the microstructure of pericardial tissue and its response to dynamic loading is crucial for the development of more durable heart valve, and computational models to predict heart valves' behavior. In this work, we have characterized the 3D collagen fiber arrangement of bovine pericardial tissue leaflets in response to a variety of different loading conditions under Second-Harmonic Generation Microscopy. This real-time visualization method assists in better understanding of the effect of cyclic load on collagen fiber orientation in time and space.

Metal mesh scaffold for tissue engineering of membranes.

Engineering of the membrane-like tissue structures to be utilized in highly dynamic loading environments such as the cardiovascular system has been a challenge in the past decade. Scaffolds are critical components of the engineered tissue membranes and allow them being formed in vitro and remain secure in vivo when implanted in the body. Several approaches have been taken to develop scaffolds for tissue membranes. However, all methods entail limitations due to structural vulnerability, short-term functionality, and mechanical properties of the resulted membrane constructs. To overcome these issues, we have developed a novel hybrid scaffold made of an extra thin layer of metal mesh tightly enclosed by biological matrix components. This approach retains all the advantages of using biological scaffolds while developing a strong extracellular matrix that can stand various types of loads after implantation inside the body.

Coupled fluid-wall modelling of steady flow in stenotic carotid arteries.

Arterial stenoses may cause critical blood flow and wall conditions leading to clinical complications. In this paper computational models of stenotic carotid arteries are proposed and the vessel wall collapse phenomenon is studied. The models are based on fluid-structure interactions (FSI) between blood and the arterial walls. Coupled finite element and computational fluid dynamics methods are used to simultaneously solve for stress and displacement in the solid, and for pressure, velocity and shear stress in the fluid domain. Results show high wall shear stress at the stenosis throat and low (negative) values accompanied by disturbed flow patterns downstream of the stenosis. The wall circumferential stress varies abruptly from tensile to compressive along the stenosis with high stress concentration on the plaque shoulders showing regions of possible plaque rupture. Wall compression and collapse are observed for severe cases. Post-stenotic collapse of the arterial wall occurs for stenotic severity as low as 50%, with the assumption that a given amount of blood flow needs to pass the stenotic artery; whereas if constant pressure drop should be maintained across a constriction, then collapse happens at severity of 75% and above. The former assumption is based on the requirement of adequate blood supply to the downstream organs/tissue, while the latter stems from the fact that the pumping mechanism of the body has a limited capacity in regulating blood pressure, in case a stenosis appears in the vasculature.