Identification of an IgE-binding determinant of the major allergen Myr p I from the venom of the Australian jumper ant Myrmecia pilosula.

The structure of the single allergenic determinant of the major ant venom allergen, Myr p I from the Australian jumper ant Myrmecia pilosula has been determined by inhibition studies with synthetic peptides. A 14 amino-acid C-terminal peptide sequence has been shown to constitute this determinant. Half-maximal inhibition of binding of ant venom-specific IgE antibodies to the native venom was obtained with this peptide at a concentration of 5 x 10(-8) M. This allergenic determinant was invariant for all ant venom-allergic subjects tested whose IgE antibodies recognized this allergen.

Cytotoxicity of pilosulin 1, a peptide from the venom of the jumper ant Myrmecia pilosula.

The synthetic peptide pilosulin 1, corresponding to the largest defined allergenic polypeptide found in the venom of the jumper ant Myrmecia pilosula, inhibited the incorporation of [methyl-3H]thymidine into proliferating Epstein-Barr transformed (EBV) B-cells. The LD50 was four-fold lower in concentration than melittin, a cytotoxic peptide found in honey bee venom. Loss of cell viability was assessed by flow cytometry by measuring the proportion of cells that fluoresced in the presence of the fluorescent dye 7-aminoactinomycin D. Examination of proliferating EBV B-cells indicated that the cells lost viability within a few minutes exposure to pilosulin 1. Partial peptides of pilosulin 1 were less efficient in causing loss of cell viability and the results suggest that the 22 N-terminal residues are critical to the cytotoxic activity of pilosulin 1. Normal blood white cells were also labile to pilosulin 1. T- and B-lymphocytes, monocytes and natural killer cells, however, were more labile than granulocytes. Analysis of pilosulin 1 using circular dichroism indicated that, in common with melittin and other Hymenoptera venom toxins, it had the potential to adopt an alpha-helical secondary structure.

An 1H NMR determination of the three-dimensional structures of mirror-image forms of a Leu-5 variant of the trypsin inhibitor from Ecballium elaterium (EETI-II).

The 3-dimensional structures of mirror-image forms of a Leu-5 variant of the trypsin inhibitor Ecballium elaterium (EETI-II) have been determined by 1H NMR spectroscopy and simulated annealing calculations incorporating NOE-derived distance constraints. Spectra were assigned using 2-dimensional NMR methods at 400 MHz, and internuclear distances were determined from NOESY experiments. Three-bond spin-spin couplings between C alpha H and amide protons, amide exchange rates, and the temperature dependence of amide chemical shifts were also measured. The structure consists largely of loops and turns, with a short region of beta-sheet. The Leu-5 substitution produces a substantial reduction in affinity for trypsin relative to native EETI-II, which contains an Ile at this position. The global structure of the Leu-5 analogue studied here is similar to that reported for native EETI-II (Heitz A, Chiche L, Le-Nguyen D, Castro B, 1989, Biochemistry 28:2392-2398) and to X-ray and NMR structures of the related proteinase inhibitor CMTI-I (Bode W et al., 1989, FEBS Lett 242:285-292; Holak TA et al., 1989a, J Mol Biol 210:649-654; Holak TA, Gondol D, Otlewski J, Wilusz T, 1989b, J Mol Biol 210:635-648; Holak TA, Habazettl J, Oschkinat H, Otlewski J, 1991, J Am Chem Soc 113:3196-3198). The region near the scissile bond is the most disordered part of the structure, based on geometric superimposition of 40 calculated structures. This disorder most likely reflects additional motion being present in this region relative to the rest of the protein. This motional disorder is increased in the Leu-5 analogue relative to the native form and may be responsible for its reduced trypsin binding. A second form of the protein synthesized with all (D) amino acids was also studied by NMR and found to have a spectrum identical with that of the (L) form. This is consistent with the (D) form being a mirror image of the (L) form and not distinguishable by NMR in an achiral solvent (i.e., H2O). The (D) form has no activity against trypsin, as would be expected for a mirror-image form.

Role of the 6-20 disulfide bridge in the structure and activity of epidermal growth factor.

Two synthetic analogues of murine epidermal growth factor, [Abu6, 20] mEGF4-48 (where Abu denotes amino-butyric acid) and [G1, M3, K21, H40] mEGF1-48, have been investigated by NMR spectroscopy. [Abu6, 20] mEGF4-48 was designed to determine the contribution of the 6-20 disulfide bridge to the structure and function of mEGF. The overall structure of this analogue was similar to that of native mEGF, indicating that the loss of the 6-20 disulfide bridge did not affect the global fold of the molecule. Significant structural differences were observed near the N-terminus, however, with the direction of the polypeptide chain between residues four and nine being altered such that these residues were now located on the opposite face of the main beta-sheet from their position in native mEGF. Thermal denaturation experiments also showed that the structure of [Abu6, 20] mEGF4-48 was less stable than that of mEGF. Removal of this disulfide bridge resulted in a significant loss of both mitogenic activity in Balb/c 3T3 cells and receptor binding on A431 cells compared with native mEGF and mEGF4-48, implying that the structural changes in [Abu6, 20] mEGF4-48, although limited to the N-terminus, were sufficient to interfere with receptor binding. The loss of binding affinity probably arose mainly from steric interactions of the dislocated N-terminal region with part of the receptor binding surface of EGF. [G1, M3, K21, H40] mEGF1-48 was also synthesized in order to compare the synthetic polypeptide with the corresponding product of recombinant expression. Its mitogenic activity in Balb/c 3T3 cells was similar to that of native mEGF and analysis of its 1H chemical shifts suggested that its structure was also very similar to native.

Solution structure of robustoxin, the lethal neurotoxin from the funnel-web spider Atrax robustus.

The solution structure of robustoxin, the lethal neurotoxin from the Sydney funnel-web spider Atrax robustus, has been determined from 2D 1H NMR data. Robustoxin is a polypeptide of 42 residues cross-linked by four disulphide bonds, the connectivities of which were determined from NMR data and trial structure calculations to be 1-15, 8-20, 14-31 and 16-42 (a 1-4/2-6/3-7/5-8 pattern). The structure consists of a small three-stranded, anti-parallel beta-sheet and a series of interlocking gamma-turns at the C-terminus. It also contains a cystine knot, thus placing it in the inhibitor cystine knot motif family of structures, which includes the omega-conotoxins and a number of plant and animal toxins and protease inhibitors. Robustoxin contains three distinct charged patches on its surface, and an extended loop that includes several aromatic and non-polar residues. Both of these structural features may play a role in its binding to the voltage-gated sodium channel.

Synthesis, stability, antiviral activity, and protease-bound structures of substrate-mimicking constrained macrocyclic inhibitors of HIV-1 protease.

Three new peptidomimetics (1-3) have been developed with highly stable and conformationally constrained macrocyclic components that replace tripeptide segments of protease substrates. Each compound inhibits both HIV-1 protease and viral replication (HIV-1, HIV-2) at nanomolar concentrations without cytotoxicity to uninfected cells below 10 microM. Their activities against HIV-1 protease (K(i) 1.7 nM (1), 0.6 nM (2), 0.3 nM (3)) are 1-2 orders of magnitude greater than their antiviral potencies against HIV-1-infected primary peripheral blood mononuclear cells (IC(50) 45 nM (1), 56 nM (2), 95 nM (3)) or HIV-1-infected MT2 cells (IC(50) 90 nM (1), 60 nM (2)), suggesting suboptimal cellular uptake. However their antiviral potencies are similar to those of indinavir and amprenavir under identical conditions. There were significant differences in their capacities to inhibit the replication of HIV-1 and HIV-2 in infected MT2 cells, 1 being ineffective against HIV-2 while 2 was equally effective against both virus types. Evidence is presented that 1 and 2 inhibit cleavage of the HIV-1 structural protein precursor Pr55(gag) to p24 in virions derived from chronically infected cells, consistent with inhibition of the viral protease in cells. Crystal structures refined to 1.75 A (1) and 1.85 A (2) for two of the macrocyclic inhibitors bound to HIV-1 protease establish structural mimicry of the tripeptides that the cycles were designed to imitate. Structural comparisons between protease-bound macrocyclic inhibitors, VX478 (amprenavir), and L-735,524 (indinavir) show that their common acyclic components share the same space in the active site of the enzyme and make identical interactions with enzyme residues. This substrate-mimicking minimalist approach to drug design could have benefits in the context of viral resistance, since mutations which induce inhibitor resistance may also be those which prevent substrate processing.

Preparation and characterization of polyclonal antibodies against human chaperonin 10.

Early pregnancy factor (EPF) has been identified as an extracellular homologue of chaperonin 10 (Cpn10), a heat shock protein that functions within the cell as a molecular chaperone. Here, we report the production of polyclonal antibodies directed against several different regions of the human Cpn10 molecule and their application to specific protein quantitation and localization techniques. These antibodies will be valuable tools in further studies to elucidate the mechanisms underlying the differential spatial and temporal localization of EPF and Cpn10 and in studies to elucidate structure and function.

Early pregnancy factor suppresses experimental autoimmune encephalomyelitis induced in Lewis rats with myelin basic protein and in SJL/J mice with myelin proteolipid protein peptide 139-151.

Early pregnancy factor (EPF) is a secreted protein with immunosuppressive and growth factor properties. During pregnancy, it appears in maternal serum within 6-24 h of fertilization, is present for at least the first two-thirds of pregnancy in all species studied and is essential for embryonic survival. It is a homologue of chaperonin 10, a heat shock protein, but, unlike other members of this family, EPF has an extracellular role. As it has the ability to modulate CD4+ T cell-dependent immune responses, its role in treatment of experimental autoimmune encephalomyelitis (EAE) was investigated. EAE is a CD4+ T cell-mediated disease, the best available animal model of multiple sclerosis (MS). Two models of EAE were investigated, acute EAE induced in Lewis rats by inoculation with myelin basic protein (MBP-EAE) and chronic relapsing EAE induced in SJL/J mice by inoculation with myelin proteolipid protein peptide (residues 139-151) (PLP-EAE). EPF, delivered intraperitoneally or orally to rats or intraperitoneally to mice, suppressed clinical signs of disease. Mice with PLP-EAE were also treated with interferon-beta, with and without EPF. Both EPF and IFN-beta suppressed clinical signs of EAE and, when administered together, gave greater suppression than when given separately. These findings suggest that EPF may be a potential candidate for use in treatment of MS and may be of use in combined therapy with IFN-beta.

In situ neutralization in Boc-chemistry solid phase peptide synthesis. Rapid, high yield assembly of difficult sequences.

Simple, effective protocols have been developed for manual and machine-assisted Boc-chemistry solid phase peptide synthesis on polystyrene resins. These use in situ neutralization [i.e. neutralization simultaneous with coupling], high concentrations (> 0.2 M) of Boc-amino acid-OBt esters plus base for rapid coupling, 100% TFA for rapid Boc group removal, and a single short (30 s) DMF flow wash between deprotection/coupling and between coupling/deprotection. Single 10 min coupling times were used throughout. Overall cycle times were 15 min for manual and 19 min for machine-assisted synthesis (75 residues per day). No racemization was detected in the base-catalyzed coupling step. Several side reactions were studied, and eliminated. These included: pyrrolidonecarboxylic acid formation from Gln in hot TFA-DMF; chain-termination by reaction with excess HBTU; and, chain termination by acetylation (from HOAc in commercial Boc-amino acids). The in situ neutralization protocols gave a significant increase in the efficiency of chain assembly, especially for "difficult" sequences arising from sequence-dependent peptide chain aggregation in standard (neutralization prior to coupling) Boc-chemistry SPPS protocols or in Fmoc-chemistry SPPS. Reported syntheses include HIV-1 protease(1-50,Cys.amide), HIV-1 protease(53-99), and the full length HIV-1 protease(1-99).

Expression of jumper ant (Myrmecia pilosula) venom allergens: post-translational processing of allergen gene products.

N-terminal analyses of electrophoretically-separated allergenic polypeptides of the venom of the jumper ant M. pilosula showed that five out of the six allergenic polypeptides identified are homologous with the cloned major allergen Myr p I and may be derived from a single precursor polypeptide. The sixth polypeptide is homologous with a second cloned major allergen, Myr p II which is expressed as a single precursor polypeptide but exists in its native form as a disulphide bond-linked complex.

Solution structure of a defensin-like peptide from platypus venom.

Three defensin-like peptides (DLPs) were isolated from platypus venom and sequenced. One of these peptides, DLP-1, was synthesized chemically and its three-dimensional structure was determined using NMR spectroscopy. The main structural elements of this 42-residue peptide were an anti-parallel beta-sheet comprising residues 15-18 and 37-40 and a small 3(10) helix spanning residues 10-12. The overall three-dimensional fold is similar to that of beta-defensin-12, and similar to the sodium-channel neurotoxin ShI (Stichodactyla helianthus neurotoxin I). However, the side chains known to be functionally important in beta-defensin-12 and ShI are not conserved in DLP-1, suggesting that it has a different biological function. Consistent with this contention, we showed that DLP-1 possesses no anti-microbial properties and has no observable activity on rat dorsal-root-ganglion sodium-channel currents.

Molecular recognition of macrocyclic peptidomimetic inhibitors by HIV-1 protease.

High-resolution crystal structures are described for seven macrocycles complexed with HIV-1 protease (HIVPR). The macrocycles possess two amides and an aromatic group within 15-17 membered rings designed to replace N- or C-terminal tripeptides from peptidic inhibitors of HIVPR. Appended to each macrocycle is a transition state isostere and either an acyclic peptide, nonpeptide, or another macrocycle. These cyclic analogues are potent inhibitors of HIVPR, and the crystal structures show them to be structural mimics of acyclic peptides, binding in the active site of HIVPR via the same interactions. Each macrocycle is restrained to adopt a beta-strand conformation which is preorganized for protease binding. An unusual feature of the binding of C-terminal macrocyclic inhibitors is the interaction between a positively charged secondary amine and a catalytic aspartate of HIVPR. A bicyclic inhibitor binds similarly through its secondary amine that lies between its component N-terminal and C-terminal macrocycles. In contrast, the corresponding tertiary amine of the N-terminal macrocycles does not interact with the catalytic aspartates. The amine-aspartate interaction induces a 1.5 A N-terminal translation of the inhibitors in the active site and is accompanied by weakened interactions with a water molecule that bridges the ligand to the enzyme, as well as static disorder in enzyme flap residues. This flexibility may facilitate peptide cleavage and product dissociation during catalysis. Proteases [Aba67,95]HIVPR and [Lys7,Ile33,Aba67,95]HIVPR used in this work were shown to have very similar crystal structures.