Computational Insights into Schottky Barrier Heights: Graphene and Borophene Interfaces with H- and H́-XSi2N4 (X = Mo, W) Monolayers.

The two-dimensional (2D) semiconducting family of XSi2N4 (X = Mo and W), an emergent class of air-stable monolayers, has recently gained attention due to its distinctive structural, mechanical, transport, and optical properties. However, the electrical contact between XSi2N4 and metals remains a mystery. In this study, we inspect the electronic and transport properties, specifically the Schottky barrier height (SBH) and tunneling probability, of XSi2N4-based van der Waals contacts by means of first-principles calculations. Our findings reveal that the electrical contacts of XSi2N4 with metals can serve as the foundation for nanoelectronic devices with ultralow SBHs. We further analyzed the tunneling probability of different metal contacts with XSi2N4. We found that the H-phase XSi2N4/metal contact shows superior tunneling probability compared to that of H́-based metal contacts. Our results suggest that heterostructures at interfaces can potentially enable efficient tunneling barrier modulation in metal contacts, particularly in the case of MoSi2N4/borophene compared to MoSi2N4/graphene and WSi2N4/graphene in transport-efficient electronic devices. Among the studied heterostructures, tunneling efficiency is highest at the H and H́-MoSi2N4/borophene interfaces, with barrier heights of 2.1 and 1.52 eV, respectively, and barrier widths of 1.04 and 0.8 Å. Furthermore, the tunneling probability for these interfaces was identified to be 21.3 and 36.4%, indicating a good efficiency of carrier injection. Thus, our study highlights the potential of MoSi2N4/borophene contact in designing power-efficient Ohmic devices.

Bi-doping improves the magnetic properties of zinc oxide nanowires.

Room-temperature ferromagnetism in the large and direct bandgap diluted magnetic semiconductor zinc oxide (ZnO) is attributed to the intrinsic defects and p-orbital-p-orbital (p-p) coupling interaction. However, due to oxidation, the ferromagnetism induced by defects is unstable. In the present work, the solution process synthesis route was utilized to grow pristine and bismuth-doped, highly crystalline ZnO nanowire (ZnO NW)-based samples. The FE-SEM images showed that the grown ZnO NWs have a preferred orientation along the c-axis in the (001) direction due to the anisotropic crystal nature of ZnO. X-ray photoelectron spectroscopy (XPS) confirmed the presence of Bi, and at a higher doping content, the bismuth oxide phase appeared. The XRD patterns showed the wurtzite crystal structure, and the large intensity of the (002) peak suggests that most of the reflection was from the top hexagonal face of the NWs, and thus, the wires are predominantly aligned along the c-axis. The TEM analysis further confirmed the crystal growth direction along the (001) direction. The UV-Visible absorption and PL measurements also showed a decrease in the bandgap with an increase in doping concentration, which may be associated with the sp-d exchange interaction between the localized d-electrons and band electrons of the Bi ions. Bi-doping tended to increase the PL intensity in the visible region. The magnetic properties measured by SQUID at 4 and 300 K showed ferromagnetic behaviour for both the pristine and Bi-doped samples. However, the saturation magnetization for the Bi-doped samples was higher compared to that of the pristine ZnO samples until the threshold doping value. The obtained results demonstrated that Bi-doping can be used to tune both the optical and magnetic properties of ZnO NWs, hence paving the way for future spintronics and spin-polarized optoelectronics applications.

High-gain subnanowatt power consumption hybrid complementary logic inverter with WSe2 nanosheet and ZnO nanowire transistors on glass.

A 1D-2D hybrid complementary logic inverter comprising of ZnO nanowire and WSe2 nanosheet field-effect transistors (FETs) is fabricated on glass, which shows excellent static and dynamic electrical performances with a voltage gain of ≈60, sub-nanowatt power consumption, and at least 1 kHz inverting speed.

Molybdenum disulfide nanoflake-zinc oxide nanowire hybrid photoinverter.

We demonstrate a hybrid inverter-type nanodevice composed of a MoS2 nanoflake field-effect transistor (FET) and ZnO nanowire Schottky diode on one substrate, aiming at a one-dimensional (1D)-two-dimensional (2D) hybrid integrated electronic circuit with multifunctional capacities of low power consumption, high gain, and photodetection. In the present work, we used a nanotransfer printing method using polydimethylsiloxane for the fabrication of patterned bottom-gate MoS2 nanoflake FETs, so that they could be placed near the ZnO nanowire Schottky diodes that were initially fabricated. The ZnO nanowire Schottky diode and MoS2 FET worked respectively as load and driver for a logic inverter, which exhibits a high voltage gain of ∼50 at a supply voltage of 5 V and also shows a low power consumption of less than 50 nW. Moreover, our inverter effectively operates as a photoinverter, detecting visible photons, since MoS2 FETs appear very photosensitive, while the serially connected ZnO nanowire Schottky diode was blind to visible light. Our 1D-2D hybrid nanoinverter would be quite promising for both logic and photosensing applications due to its performance and simple device configuration as well.

Long single ZnO nanowire for logic and memory circuits: NOT, NAND, NOR gate, and SRAM.

We demonstrate logic and static random access memory (SRAM) circuits using a 100 µm long and 100 nm thin single ZnO nanowire (NW), which acts as a channel of field-effect transistors (FETs) with Al2O3 dielectrics. NW FETs are thus arrayed in one dimension to consist of NOT, NAND, and NOR gate logic, and SRAM circuits. Two respective top-gate NW FETs with Au and indium-tin-oxide (ITO) were connected to form an inverter, the basic NOT gate component, since the former gate leads to an enhanced mode FET while the latter to depletion mode due to their work function difference. Our inverters showed a high voltage gain of 22 under a 5 V operational voltage, resulting in successful operation of all other devices. We thus conclude that our long single NW approach is quite promising to extend the field of nano-electronics.