RESUMEN
PURPOSE: There are only limited anatomical data on nerves, veins, and arteries in the temporal bone. More detailed anatomical data are required to improve planning of treatments targeting the temporal bone region. Herein, we performed a detailed analysis of the facial canal (FC) and the related carotid artery and vein. METHODS: We examined the bony structure of the middle ear and FC, jugular foramen, and carotid canal in 30 Japanese elderly donor cadavers. Three-dimensional reconstruction of the canal structure was achieved using cone beam computed tomography, while macroscopic and histological analyses were also performed. RESULTS: The FC form was classified as either straight (28%) or bent (72%). There were significant differences in the diameter of the FC and the distance between the internal jugular vein, other FC branches, and the FC. Principal component analysis (PCA) was performed for the FC using 29 factors. Two principal components significantly explained 30.9% (component 1, 18.6%; component 2, 12.3%) of the FC. Histological observation showed numerous ganglion cells and shrunken neurons in the geniculate ganglion of the facial nerve of elderly samples. CONCLUSION: FC diameter is an important contributor to the relationship between the FC and the jugular foramen. The FC and the internal jugular vein are located close to each other, which is useful information for the trans-canal surgery of the otology. Furthermore, the geniculate ganglion contains numerous ganglion cells and shrunken neurons, which may affect the FC structure during bone matrix remodeling with aging.
Asunto(s)
Nervio Facial , Hueso Temporal , Humanos , Anciano , Hueso Temporal/diagnóstico por imagen , Hueso Temporal/patología , Nervio Facial/diagnóstico por imagen , Oído Medio , Tomografía Computarizada de Haz Cónico , Ganglio GeniculadoRESUMEN
The purpose of this study was to evaluate the appearance of artifacts by four types of root canal filling sealers on cone-beam computed tomography (CBCT) images. Thirty standardized tooth models were given the radiopacity equivalent to human teeth, and root canal preparation was performed using WaveOne Gold. Root canal filling by a single-point method was performed using WaveOne Gold gutta-percha points and four types of root canal sealers: AH Plus (AH), CANALS (CA), BioRoot RCS (BR), and MTA Fillapex (MTA). Samples were taken by periapical radiography at 60 kV and scanned by CBCT at three tube voltages (70, 85, and 100 kV). The gray-scale values (GVs) of the periapical radiographs were measured and the aluminum equivalents were calculated. On the CBCT axial images, the artifact and dentin area GVs were measured and the rate of change in the GV (RCGV) was calculated as follows: RCGV (%) = (dentin area GV - artifact GV)/dentin area GV × 100. High-density areas with artifacts on the CBCT images were also measured. On the periapical radiographs, the aluminum equivalent was largest for AH and smallest for MTA. On the CBCT images, AH showed the largest values for both RCGV and the high-density areas, while BR and MTA showed comparable values. Correlations were found between the radiopacity on the periapical radiographs and the degree of artifacts on the CBCT images. These findings suggest that the greater the contrast in the 2D image, the higher the artifacts in the 3D image.
Asunto(s)
Artefactos , Materiales de Obturación del Conducto Radicular , Tomografía Computarizada de Haz Cónico , Cavidad Pulpar , Gutapercha , HumanosRESUMEN
PURPOSE: The morphological structure of the nasal cavity (NC) is important for endoscopic surgical treatment. The location of nasal turbinates, including the superior turbinate (ST), middle turbinate (MT) and inferior turbinate (IT), are well presented during the formation of the human NC in cone beam CT (CBCT) images. There is a complex relationship between the nasal sinuses, the maxillary sinus (MS), ethmoidal sinus and sphenoid sinus, during formation of the NC structure at the morphological level. There is a need to clearly define the relationships of these nasal elements at the ossification level, during development. METHODS: We investigated the three-dimensional construction of human foetal NC elements, including ST, MT, IT and vomer, using CBCT images from 16 weeks gestation (E16) to E31 (25 foetuses) and compared it to histochemical observations (E25). RESULTS: At the stage of ossification, the studied elements are elongated in the posterior region near the sphenoidal bone, showing that the locations of the ST, MT, and IT are important during formation of the NC. CBCT analysis revealed that the horizontal and vertical directions of nasal turbinates affect the formation of the human NC. CONCLUSION: The location and elongated development of the MT is one of the most important elements for NC formation. The relationship between the nasal sinus and nasal turbine at the level of ossification may provide useful information in clinical treatment of children.
Asunto(s)
Tomografía Computarizada de Haz Cónico/métodos , Feto/anatomía & histología , Imagenología Tridimensional , Cornetes Nasales/diagnóstico por imagen , Cornetes Nasales/embriología , Cadáver , Femenino , Humanos , MasculinoRESUMEN
PURPOSE: The greater and lesser palatine nerves and vessels supply the hard and soft palates, and the roots of these vessels and nerves run through a bony structure. However, the arrangement of blood vessels in the maxilla requires attention during clinical treatments, but detailed morphological information about changes in the greater and lesser palatine arteries and nerves during aging is unavailable. We therefore need detailed investigations of the morphology of the donor cadaver palatine using cone-beam computed tomography (CBCT) and macroscopic observations. METHODS: We investigated 72 donor cadavers using macroscopic segmentation and CBCT. The results' analysis examined differences in skull measurement parameters and differences between dentate and edentulous cases. RESULTS: The greater palatine artery and nerve showed different macroscopic arrangements in dentate and edentulous cadavers. We also classified three types of bony structures of the nerve and vessel roots in the molar regions of the palatine using CBCT images: the shallow groove, deep groove, and flat groove. The deep groove is the deepest of the three and is remarkable in edentulous elderly cadavers. CONCLUSION: This study of macroscopic and CBCT data provides information useful for planning dental implant surgeries and autogenous bone harvesting.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Paladar Duro/irrigación sanguínea , Paladar Duro/inervación , Paladar Blando/irrigación sanguínea , Paladar Blando/inervación , Adulto , Anciano , Cadáver , Femenino , Humanos , Masculino , Persona de Mediana Edad , Paladar Duro/diagnóstico por imagen , Paladar Blando/diagnóstico por imagenRESUMEN
Purpose: This study was conducted to identify the typical sites and patterns of peri-implant bone defects on cone-beam computed tomography (CBCT) images, as well as to evaluate the detectability of the identified bone defects on panoramic images. Materials and Methods: The study population included 114 patients with a total of 367 implant fixtures. CBCT images were used to assess the presence or absence of bone defects around each implant fixture at the mesial, distal, buccal, and lingual sites. Based on the number of defect sites, the presentations of the peri-implant bone defects were categorized into 3 patterns: 1 site, 2 or 3 sites, and circumferential bone defects. Two observers independently evaluated the presence or absence of bone defects on panoramic images. The bone defect detection rate on these images was evaluated using receiver operating characteristic analysis. Results: Of the 367 implants studied, 167 (45.5%) had at least 1 site with a confirmed bone defect. The most common type of defect was circumferential, affecting 107 of the 167 implants (64.1%). Implants were most frequently placed in the mandibular molar region. The prevalence of bone defects was greatest in the maxillary premolar and mandibular molar regions. The highest kappa value was associated with the mandibular premolar region. Conclusion: The typical bone defect pattern observed was a circumferential defect surrounding the implant. The detection rate was generally higher in the molar region than in the anterior region. However, the capacity to detect partial bone defects using panoramic imaging was determined to be poor.
RESUMEN
Objectives: This study aimed to investigate the relationship between postoperative reconstructed tongue flap volume (RTFV) and body mass index (BMI) and identify factors affecting the flap volume in patients with tongue squamous cell carcinoma. Methods: Thirty-two patients were evaluated for RTFV from computed tomography images and BMI. The first and second evaluations were done at 6 months and 1.5 years after surgery respectively. RTFV rate changes and BMI differences from the first and second evaluations were calculated. The correlation between RTFV rate change and BMI difference was assessed using Spearman's rank correlation coefficient. Multiple regression analysis evaluated the relationship between the flap volume rate change and age, sex, flap type, and BMI difference to identify influencing factors. Results: The flap volume rate change and BMI difference correlated significantly (r = .594, p < .05). BMI difference and flap type were independent factors that affected reconstructed flap volume rate change in multiple regression analysis (p < .05). Conclusion: The flap volume of patients with tongue squamous cell carcinoma correlates with the BMI change in the chronic phase. Patients after tongue reconstruction need to be well nourished to maintain BMI and thus postoperative tongue volume to maintain the quality of life. Level of Evidence: Level 3.
RESUMEN
OBJECTIVE: Anatomical information regarding the eustachian tube (ET) is limited; therefore, more detailed analytical data on ET structure is needed when planning surgical treatments involving the temporal bone. METHODS: We examined the bony structure of the middle ear and ET in 30 Japanese donor cadavers (71-97 years old at the time of death) both macroscopically and with cone-beam computed tomography. Each ET was reconstructed in 3 dimensions, and the structure and correlations of ET element measurements, identified via principal component analysis, were analyzed. RESULTS: Delineation between bony and cartilaginous zones appeared unclear, and the space between ET cartilage and the carotid canal was narrow. We observed stenosis of the ET bony canal in 43.3% of the specimens (n = 30). In 50% of the specimens, the position of the ET bony canal was depressed at the pharyngeal orifice of the auditory side of the tube, and the middle region was a roundish structure. The lateral and central regions of the bony canal were related to the ET bony canal structure. CONCLUSION: The close proximity of the ET bony canal to the carotid canal is an important anatomical and morphological finding. Pre-surgical 3D modeling of the middle ear structure, or at a minimum, of the central region of the middle ear canal, may provide useful information for planning procedures that involve the ET.
Asunto(s)
Trompa Auditiva , Anciano , Anciano de 80 o más Años , Cadáver , Tomografía Computarizada de Haz Cónico , Humanos , Análisis de Componente Principal , Hueso TemporalRESUMEN
Thickening of the Schneiderian membrane (SM, mucosa of the maxillary sinus) appears in the paranasal sinus. Information on SM thickening is available for patients receiving sinus lift treatments, which is a risk factor for SM excretory dysfunction. However, more information is needed on the structure of the SM and the relationship between the maxilla sinus and palatine with the alveolar bone and the SM for dental implant treatment in the human maxilla. One hundred twenty-six sides of the maxilla from 71 cadavers were subjected to cone-beam CT (CBCT) analysis and macroscopic and immunohistochemical observations in this study. A thickened SM was mainly observed in the middle region of the basal layer of the maxillary sinus (MS). Strong calcitonin gene-related peptide (CGRP)-positive reactions were observed in the alveolar bone, oral mucosa, mucosa of the maxillary sinus, and trigeminal ganglion (TG) cells in dentulous samples compared with edentulous samples. TG cells play important roles in delivering CGRP through axons to the mucosal gland and in regulating the maxilla-related thickening of the SM. These data could help determine CGRP functions in the mucosal gland and bone formation between dentulous and edentulous samples and indicate that CGRP may pass from the TG to the maxillary sinus glands.
Asunto(s)
Péptido Relacionado con Gen de Calcitonina/metabolismo , Arcada Parcialmente Edéntula/metabolismo , Seno Maxilar/metabolismo , Ganglio del Trigémino/metabolismo , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Inmunohistoquímica , Masculino , Persona de Mediana Edad , Mucosa Nasal/metabolismoRESUMEN
The formation of the maxillary sinus (MS) is tied to the maturation of the craniofacial bones during development. The MS and surrounding bone matrices in Japanese foetal specimens were inspected using cone beam computed tomography relative to the nasal cavity (NC) and the surrounding bones, including the palatine bone, maxillary process, inferior nasal concha and lacrimal bone. The human foetuses analysed were 223.2 ± 25.9 mm in crown-rump length (CRL) and ranged in estimated age from 20 to 30 weeks of gestation. The amount of bone in the maxilla surrounding the MS increased gradually between 20 and 30 weeks of gestation. Various calcified structures that formed the bone matrix were found in the cortical bone of the maxilla, and these calcified structures specifically surrounded the deciduous tooth germs. By 30 weeks of gestation, the uncinate process of the ethmoid bone formed a border with the maxilla. The distance from the midline to the maximum lateral surface border of the MS combined with the width from the midline to the maximum lateral surface border of the inferior nasal concha showed a high positive correlation with CRL in Japanese foetuses. There appears to be a complex correlation between the MS and NC formation during development in the Japanese foetus. Examination of the surrounding bone indicated that MS formation influences maturation of the maxilla and the uncinate process of the ethmoid bone during craniofacial bone development.
Asunto(s)
Cara/embriología , Seno Maxilar/embriología , Pueblo Asiatico , Tomografía Computarizada de Haz Cónico , Feto/diagnóstico por imagen , Humanos , Japón , Seno Maxilar/diagnóstico por imagenRESUMEN
The condylar process is the most common site of mandibular fracture; however, the biomechanics of this site are not well understood. Vascular endothelial growth factor (VEGF) is a marker for vasculogenesis and the formation of bone. Alkaline phosphatase (ALP) is also a biochemical marker of bone formation. To better understand the biomechanics of the condylar process, we examined the structure of the heads and necks of human mandibles from 35 male cadavers aged 25 to 90 years (mean, 61.5 years) using cone-beam computed tomography (CBCT). In addition, we used immunohistochemistry to assess the expression of the vascular markers VEGF and CD31 as well as the bone formation marker ALP. Significant differences were observed in the thickness of the posterolateral region of the cortical bone in the head of the mandible (p < 0.05) as well as in the medial (p < 0.001) and posterior (p < 0.01) regions of the neck of the mandible. VEGF accumulated more in deformed heads than in heads with oval-shaped structures. ALP was found in numerous small cavities of cortical bone in oval-shaped heads. These differences may be related to dislocation caused by muscle tension or the occlusion of temporomandibular joint movement.
Asunto(s)
Fosfatasa Alcalina/metabolismo , Mandíbula/patología , Mandíbula/fisiología , Molécula-1 de Adhesión Celular Endotelial de Plaqueta/metabolismo , Factor A de Crecimiento Endotelial Vascular/metabolismo , Adulto , Anciano , Anciano de 80 o más Años , Biomarcadores/metabolismo , Fenómenos Biomecánicos , Cadáver , Humanos , Inmunohistoquímica , Masculino , Persona de Mediana Edad , Articulación Temporomandibular/patología , Articulación Temporomandibular/fisiologíaRESUMEN
We observed the location of the posterior superior alveolar artery (PSAA) and nerve at the macroscopic level between the maxillary sinus (MS) and surrounding bone of the anterior region of the maxilla. This study was completed using cone beam computed tomography (CBCT) imaging of 19 human cadavers with 38 sides of Japanese origin (ranging in age from 59-94 years, mean 77.7 +/- 9.8 years) that were prepared for this study. The bony canal structure of the inner surface of the maxilla was clearly apparent in our results, and the bony canals were classified into three types according to the structure along the course of the PSAA: canal-like, ditch-shaped tunnel and fragmented, and the lest sides were undefined. Calcitonin gene-related peptide (CGRP)-positive fibers were identified along the PSAA in the bony canal of the maxilla by immunohistochemistry. The presence of the bony structure and CGRP-positive nerve fibers along the PSAA suggests that there is risk to the PSAA during surgery involving graft implant in the floor of the maxillary sinus.
Asunto(s)
Seno Maxilar/anatomía & histología , Seno Maxilar/diagnóstico por imagen , Tomografía Computarizada por Rayos X/métodos , Anciano , Anciano de 80 o más Años , Pueblo Asiatico , Cadáver , Péptido Relacionado con Gen de Calcitonina/metabolismo , Femenino , Humanos , Inmunohistoquímica , Masculino , Arteria Maxilar/anatomía & histología , Seno Maxilar/irrigación sanguínea , Seno Maxilar/inervación , Persona de Mediana Edad , Fibras Nerviosas/metabolismoRESUMEN
The maxillary sinus (MS) in the maxilla bone is located near the orbit, the nasal cavity and the oral cavity; however, the positioning of the constituent bones is complex. The posterior superior alveolar branches of the maxillary artery and nerve are distributed in the lateral wall of the MS. The courses of these blood vessels and nerves are restricted by the morphology of the craniofacial bones, and the landmarks used in dental implant treatment of these courses mainly run along the lateral wall of the MS. In this study, 19 human cadavers with 34 sides of Japanese origin (ranging in age from 59-94 years, mean 77.7 +/- 9.8 years) were prepared for measurement of the MS, the superior alveolar artery and the infraorbital artery using cone beam computed tomography (CBCT). The posterior superior alveolar artery (PSAA) of the lateral wall of the MS can be classified into one of three groups based on the supply pattern. In the greatest number of cadavers, the PSAA ran mainly to the lateral surface of the zone between the superior border of the alveolar foramen and the inferior border of the MS (53.0%, 18/34). In others, the PSAA ran to the zone between the infraorbital foramen and the superior border of the alveolar foramen (17.6%, 6/34); in a third group, the PSAA ran to the zone between the inferior border of the MS and the greater palatine foramen (23.5%, 8/34). The lest of two sides are spread out in this area (5.9%, 2/34). CBCT is the most accurate tool to evaluate important anatomical parameters, such as the distance of the blood supply, for the implant of grafts in the floor of the MS during surgical procedures.
Asunto(s)
Arteria Maxilar/anatomía & histología , Nervio Maxilar/anatomía & histología , Seno Maxilar/irrigación sanguínea , Seno Maxilar/inervación , Anciano , Anciano de 80 o más Años , Pueblo Asiatico , Cadáver , Femenino , Humanos , Masculino , Arteria Maxilar/diagnóstico por imagen , Nervio Maxilar/diagnóstico por imagen , Seno Maxilar/anatomía & histología , Seno Maxilar/diagnóstico por imagen , Persona de Mediana Edad , Diente Molar , Tomografía Computarizada por Rayos XRESUMEN
BACKGROUND: Extracting and three-dimensional (3D) printing an organ in a region of interest in DICOM images typically calls for segmentation as a first step in support of 3D printing. The DICOM images are not exported to STL data immediately, but segmentation masks are exported to STL models. After primary and secondary processing, including noise removal and hole correction, the STL data can be 3D printed. The quality of the 3D model is directly related to the quality of the STL data. This study focuses and reports on the DICOM to STL segmentation performance for nine software packages. METHODS: Multidetector row CT scanning was performed on a dry human mandible with two 10-mm-diameter bearing balls as a phantom. The DICOM image file was then segmented and exported to an STL file using nine different commercial/open-source software packages. Once the STL models were created, the data (file) properties and the size and volume of each file were measured, and differences across the software packages were noted. Additionally, to evaluate differences between the shapes of the STL models by software package, each pair of STL models was superimposed, with the observed differences between their shapes characterized as the shape error. RESULTS: The data (file) size of the STL file and the number of triangles that constitute each STL model were different across all software packages, but no statistically significant differences were found across software packages. The created ball STL model expanded in the X-, Y-, and Z-axis directions, with the length in the Z-axis direction (body axis direction) being slightly longer than that in the other directions. The mean shape error between software packages of the mandibular STL model was 0.11 mm, but there was no statistically significant difference between them. CONCLUSIONS: Our results revealed that there are some differences between the software packages that perform the segmentation and STL creation of the DICOM image data. In particular, the features of each software package appeared in the fine and thin areas of the osseous structures. When using these software packages, it is necessary to understand the characteristics of each.
RESUMEN
Using a trans-illumination device that applies digital imaging fiber-optic transillumination (DIFOTI) technology, which involves the use of transmitted near-infrared laser light for inspection, the effect of composite resin (CR) restoration of a tooth on caries detection was evaluated. A cavity was formed in a tooth of the lower jaw cut from the specimen, experimental CRs with various filler rates were filled, and the influence of the filler on the obtained image was investigated. On the near-infrared images, the lightness differences between the CR-restored portion and the tooth portion were measured. The translucency parameter (TP) value and the correlation between the lightness differences and TP value of the CRs were investigated. The experimental results showed that the greater rate of macro-filler is, the lighter image and larger TP value. In other words, CR with hybrid filler to increase the TP value is less likely to affect caries detection by DIFOTI.
Asunto(s)
Caries Dental , Diente , Resinas Compuestas , Tecnología de Fibra Óptica , Humanos , TransiluminaciónRESUMEN
Many types of cone-beam computed tomography (CBCT) have recently been developed and are being used in many dental clinics. CBCT has significantly changed imaging diagnosis in dentistry by showing detailed structures in multiple dimensions with high spatial resolution. This allows dentists to confirm what cannot be recognized with conventional two-dimensional images, such as small neurovascular canals, the buccolingual location of structures/lesions, and the three-dimensional shapes of hard tissue structures. The aim of this study was to review the normal variants of detailed anatomical structures in relation with the mandibular canal by comparing the previous reports and anatomical evaluations. These structures are likely to be observed on CBCT images by dental practitioners prior to dental procedures involving the mandibular teeth and bone. Understanding the relationship of these structures is useful for dental practitioners and oral surgeons to reduce the possibility of causing damage and patient discomfort during dental procedures.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Mandíbula/diagnóstico por imagen , HumanosRESUMEN
There is an important bone matrix with remodelling between dentate and edentulous samples of the human maxilla for bone metabolism. Cone beam computed tomography (CBCT) is useful for structural analysis of bone. The objective of this study was to investigate morphological data of donor cadavers in detail using CBCT imaging and principal component analysis (PCA). We analysed 38 donor cadavers using a CBCT apparatus. The analytical results defined differences in skull measurement parameters and dentate and edentulous levels using PCA. We observed cortical bone, trabecular bone, and the distance from the bottom of the maxillary sinus to the oral mucosa at a right angle to the palatal plane of the first molar region between dentate and edentulous samples of the human maxilla using CBCT imaging. In the dentate sample of the maxilla, component 1 was defined by negative contributions from gender (-0.84) and age (-0.54) to positive contributions such as cortical bone structure (CBS, 0.68) and trabecular bone structure (TBS, 0.50). There was a difference in CBS between dentate and edentulous human maxilla samples. This study of CBCT data provides useful basal information for planning dental implant surgery using PCA.
Asunto(s)
Maxilar/diagnóstico por imagen , Anciano , Anciano de 80 o más Años , Tomografía Computarizada de Haz Cónico , Femenino , Humanos , Masculino , Análisis de Componente PrincipalRESUMEN
PURPOSE: The mandibular ramus is regarded as a relatively safe zone for a sagittal splitting osteotomy or for harvesting bone during implant treatment. The only important anatomical structure is the mandibular canal. The mandible has some anatomical variants that need to be recognized, such as a bifid mandibular canal, a retromolar canal, and rarely a temporal crest canal (TCC). In this study, cadaver mandibles were used to evaluate the TCC in the mandibular ramus using cone beam computed tomography (CBCT). METHODS: Altogether, 90 sites on 48 mandibles from Japanese cadavers were examined in this study. The CBCT volumetric images were acquired for areas of 79 mm[Formula: see text] 71 mm. Three-dimensional observation of the images was undertaken to estimate the frequency, position of the orifices, and canal continuity. The cadaver mandibles in which the TCCs were observed were dissected from the inner surface to confirm the contents. RESULTS: Five TCCs (5.6 %) were observed in 90 observation areas. At least one TCC was confirmed in four (8.3 %) of 48 mandibles. Two types of TCC were recognized. Dissection revealed that they contained neurovascular bundles. CONCLUSION: Three-dimensional diagnosis is essential prior to surgical procedures in the mandibular ramus because unexpected blood vessels may be present that may cause bleeding or complications during the surgery.
Asunto(s)
Tomografía Computarizada de Haz Cónico/métodos , Imagenología Tridimensional , Mandíbula/diagnóstico por imagen , Cadáver , Femenino , Humanos , Masculino , Mandíbula/cirugía , Osteotomía , Reproducibilidad de los ResultadosRESUMEN
The discomallear ligament (DML) runs through a narrow space of bony petrotympanic fissure, which joins the articular disc of the temporomandibular joint (TMJ) and the malleus in the tympanic cavity. Previous report suggest that an anatomical feature gives rise to TMJ pain and dysfunction. Recently, the movement of the malleus caused by hypertension on the discomallear ligament is important to the function of the TMJ. The purpose of this study is to define its morphological features using the cone beam CT (CBCT) and anatomical dissection of Japanese cadavers. Petrotympanic fissure and DML were observed in 14 cadavers (eight males and six females). It is revealed that a wide tunnel-like structure was found on CBCT images in the middle region of the petrotympanic fissure to the malleus in the tympanic cavity consisting of mainly three types: a wide tunnel-shaped structure (29.2%, 7/24, type 1), a tunnel-shaped structure widely open in the entrance of the petrotympanic fissure to the mandibular fossa and gradually thinning out in the tympanic cavity (20.8%, 5/24, type 2), and a tunnel-shaped structure widely open in the entrance of the mandibular fossa, middle region with flat-shaped tunnel structure and narrow exit in the tympanic cavity (41.7%, 10/24, type 3). These structures between the entrance of the petrotympanic fissure and the exit at the tympanic cavity are important to define the limited movement of the malleus. Therefore, morphological feature of the ligaments in malleus may relate to TMJ pain, dysfunction and hearing function.