Wearable Potentiometric Sensor Based on Na0.44MnO2 for Non-invasive Monitoring of Sodium Ions in Sweat.

Here, we present a wearable potentiometric ion sensor for real-time monitoring of sodium ions (Na+) in human sweat samples using Na0.44MnO2 as the sensing material. Na0.44MnO2 is an attractive material for developing wearable electrochemical sensors due to its good Na+ incorporation ability, electrical conductivity, stability, and low fabrication cost. In the first step, the analytical performance of the electrode prepared using Na0.44MnO2 is presented. Then, a miniaturized potentiometric cell integrated into a wearable substrate is developed, which reveals a Nernstian response (58 mV dec-1). We achieved the detection of Na+ in the linear ranges of 0.21-24.54 mmol L-1, which is well within the physiological range of Na+. Finally, for on-body sweat analysis, the potentiometric sensor is fully integrated into a headband textile. This platform can be employed for non-invasive analysis of Na+ in human sweat for healthcare and disease diagnosis.

Tear proteomics analysis of patient suffered from delayed mustard gas keratopathy.

Understanding the molecular and cellular mechanisms involved in the pathogenesis of ocular injured induced by mustard gas can help better identify complications and discover appropriate therapies. This study aimed to analyze the proteomics of tears of chemical warfare victims with mustard gas ocular injuries and compare it with healthy individuals. In this case-control research, 10 mustard gas victims with long-term ocular difficulties (Chronic) were included in the patient group, while 10 healthy persons who were age and sex matched to the patients were included in the control group. Schirmer strips were used to collect the tears of the participants. Proteomics experiments were performed using the high-efficiency TMT10X method to evaluate the tear protein profile, and statistical bioinformatics methods were used to identify the differently expressed proteins. 24 proteins had different expressions between the two groups. Among these 24 proteins, 8 proteins had increased expression in veterans' tears, while the remaining 16 proteins had decreased expression. Reactome pathways were used to look at proteins with various expressions, and 13 proteins were found to be engaged in the immune system, 9 of which were effective in the innate immune system, and 5 proteins were effective in the complement cascade. Ocular mustard gas exposure may cause a compromised immune system on the eye's surface, exposing the cornea to external and endogenous infections, and eventually causing corneal opacity and reduced vision.

Mask assistance to colorimetric sniffers for detection of Covid-19 disease using exhaled breath metabolites.

According to World Health Organization reports, large numbers of people around the globe have been infected or died for Covid-19 due to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Researchers are still trying to find a rapid and accurate diagnostic method for revealing infected people by low viral load with the overriding goal of effective diagnostic management. Monitoring the body metabolic changes is known as an effective and inexpensive approach for the evaluation of the infected people. Here, an optical sniffer is introduced to detect exhaled breath metabolites of patients with Covid-19 (60 samples), healthy humans (55 samples), and cured people (15 samples), providing a unique color pattern for differentiation between the studied samples. The sniffer device is installed on a thin face mask, and directly exposed to the exhaled breath stream. The interactions occurring between the volatile compounds and sensing components such as porphyrazines, modified organic dyes, porphyrins, inorganic complexes, and gold nanoparticles allowing for the change of the color, thus being tracked as the sensor responses. The assay accuracy for the differentiation between patient, healthy and cured samples is calculated to be in the range of 80%-84%. The changes in the color of the sensor have a linear correlation with the disease severity and viral load evaluated by rRT-PCR method. Interestingly, comorbidities such as kidney, lung, and diabetes diseases as well as being a smoker may be diagnosed by the proposed method. As a powerful detection device, the breath sniffer can replace the conventional rapid test kits for medical applications.

A ratiometric electrochemical DNA-biosensor for detection of miR-141.

A sensitive biosensor for the detection of miR-141 has been constructed. The DNA-biosensor is prepared by first immobilizing the thiolated methylene blue-labeled hairpin capture probe (MB-HCP) on two-layer nanocomposite film graphene oxide-chitosan@ polyvinylpyrrolidone-gold nanourchin modified glassy carbon electrode. We used the hematoxylin as an electrochemical auxiliary indicator in the second stage to recognize DNA hybridization via the square wave voltammetry (SWV) responses that record the accumulated hematoxylin on electrode surfaces. The morphology and chemical composition of nanocomposite was characterized using TEM, FE-SEM, and FT-IR techniques. The preparation stages of the DNA-biosensor were screened by electrochemical impedance spectroscopy and cyclic voltammetry. The proposed DNA-biosensor can distinguish miR-141 from a non-complementary and mismatch sequence. A detection limit of 0.94 fM and a linear range of 2.0 -5.0 × 105 fM were obtained using SWV for miR-141 detection. The working potential for methylene blue and hematoxylin was -0.28 and + 0.15 V vs. Ag/AgCl, respectively. The developed biosensor can be successfully used in the early detection of non-small cell lung cancer (NSCLC) by directly measuring miR-141 in human plasma samples. This novel DNA-biosensor is of promise in early sensitive clinical diagnosis of cancers with miR-141 as its biomarker.

Non-invasive detection of COVID-19 using a microfluidic-based colorimetric sensor array sensitive to urinary metabolites.

A colorimetric sensor array designed on a paper substrate with a microfluidic structure has been developed. This array is capable of detecting COVID-19 disease by tracking metabolites of urine samples. In order to determine minor metabolic changes, various colorimetric receptors consisting of gold and silver nanoparticles, metalloporphyrins, metal ion complexes, and pH-sensitive indicators are used in the array structure. By injecting a small volume of the urine sample, the color pattern of the sensor changes after 7 min, which can be observed visually. The color changes of the receptors (recorded by a scanner) are subsequently calculated by image analysis software and displayed as a color difference map. This study has been performed on 130 volunteers, including 60 patients infected by COVID-19, 55 healthy controls, and 15 cured individuals. The resulting array provides a fingerprint response for each category due to the differences in the metabolic profile of the urine sample. The principal component analysis-discriminant analysis confirms that the assay sensitivity to the correctly detected patient, healthy, and cured participants is equal to 73.3%, 74.5%, and 66.6%, respectively. Apart from COVID-19, other diseases such as chronic kidney disease, liver disorder, and diabetes may be detectable by the proposed sensor. However, this performance of the sensor must be tested in the studies with a larger sample size. These results show the possible feasibility of the sensor as a suitable alternative to costly and time-consuming standard methods for rapid detection and control of viral and bacterial infectious diseases and metabolic disorders.

Well-Orientation Strategy for Direct Immobilization of Antibodies: Development of the Immunosensor Using the Boronic Acid-Modified Magnetic Graphene Nanoribbons for Ultrasensitive Detection of Lymphoma Cancer Cells.

This work presents an effective strategy for the well-oriented immobilization of antibodies in which boronic acid is directly attached to the surface and with no need of the long and flexible spacer. A magnetic graphene nanoribbon-boronic-acid-based immunosensor was developed and tested for the impedimetric detection of lymphoma cancer cells, a blood cancer biomarker. Magnetic graphene nanoribbons (MGNRs) were modified with boronic acid (BA) to create a supporting matrix that is utilized by immobilizing anti-CD20 antibodies with good orientation. The prepared biosensing layer (MGNR/BA/Ab) with well-oriented antibodies was premixed into whole blood samples to interact with lymphoma cancer cell receptors. In the presence of target cell receptors, an immunocomplex was formed between anti-CD20 antibodies and lymphoma cancer cell receptors. Then, the biosensing layer was magnetically collected on a screen-printed carbon electrode (SPCE) and placed in a homemade electrochemical cell configuration to measure impedimetric signals. The fabrication steps of the immunosensor were characterized by various techniques, such as resonance light scattering, fluorescence, electrochemical impedance spectroscopy, and cyclic voltammetry. The assay is highly sensitive: the calculated limit of detection of lymphoma cancer cells was as low as 38 cells/mL, and the detection was linear from 100 to 1 000 000 cells/mL. The specificity of the immunosensor is also very high, and there is no interference effect with several potential interferents, such as the breast cancer (MCF-7), human embryonic kidney (HEK293), and leukemia (HL-60 and KCL-22) cell lines. The performance of the immunosensor for lymphoma cancer cells in clinical blood samples is consistent with that of commercial flow cytometric assays.

A paper-based colorimetric sensor array for discrimination and simultaneous determination of organophosphate and carbamate pesticides in tap water, apple juice, and rice.

A colorimetric paper-based sensor is proposed for the rapid monitoring of six major organophosphate and carbamate pesticides. The assay was constructed by dropping gold and silver nanoparticles on the hydrophilic zones of a paper substrate. The nanoparticles were modified by L-arginine, quercetin, and polyglutamic acid. The mechanism of sensing is based on the interaction between the pesticide and the nanoparticles. The color of nanoparticles changed during the interactions. A digital camera recorded these changes. The assay provided a unique response for each studied pesticide. This method can determine six individual pesticides including carbaryl, paraoxon, parathion, malathion, diazinon, and chlorpyrifos. The limit of detection for these pesticides were 29.0, 22.0, 32.0, 17.0, 45.0, and 36.0 ng mL-1, respectively. The assay was applied to simultaneously determine the six studied pesticides in a mixture using the partial least square method (PLS). The root mean square errors of prediction were 11, 8.7, 9.2, 10, 12, and 11 for carbaryl, paraoxon, parathion, malathion, diazinon, and chlorpyrifos, respectively. The paper-based device can differentiate two types of studied pesticide (organophosphate and carbamate) as well as two types of organophosphate structures (oxon and thion). Furthermore, this sensor showed high selectivity to the pesticides in the presence of other potential species (e.g., metal ions, anions, amino acids, sugar, and vitamins). This assay is capable of determining the pesticide compounds in tap water, apple juice, and rice samples.Graphical abstract.

Two novel sets of UiO-66@ metal oxide/graphene oxide Z-scheme heterojunction: Insight into tetracycline and malathion photodegradation.

Nowadays, widespread researches have been focused on the development of effective photocatalysts to remove pollutants of the aquatic system. In accordance with the universal studies, two new sets of UiO-66@ metal oxide (including ZnO and TiO2)/graphene oxide heterojunctions were synthesized for photodegradation of aromatic (tetracycline) and nonaromatic (malathion) pollutants which are challenging cases in the environment. The dosage of the photocatalyst, pH of the solution, the type of metal oxide, and the presence of various scavengers are assayed parameters in this work. In the optimum condition, maximum photodegradation efficiency is achieved in 90 min for tetracycline (81%) and malathion (100%) by the UiO-66@ZnO/graphene oxide. The superior separation of charge carriers by Z-scheme mechanism, excellent electron mobility on layers of graphene oxide and high surface area are factors that enhanced the efficiency. Furthermore, in comparison with pure UiO-66, the band gaps belong to heterojunctions revealed a red shift in the absorption edge, which can be responsible for more expand adsorption of the solar spectrum. Total organic carbon analysis verified the decontamination of these pollutants in the solution. The produced main intermediates during the photocatalytic process were identified and the possible degradation pathway proposed. In general, the superior photocatalytic activity suggests that these designed photocatalysts can be a promising choice for having a clean future.

Enhanced Visual Wireless Electrochemiluminescence Immunosensing of Prostate-Specific Antigen Based on the Luminol Loaded into MIL-53(Fe)-NH2 Accelerator and Hydrogen Evolution Reaction Mediation.

A sensitive prostate-specific antigen (PSA) detection method using a visual-readout closed bipolar electrode (BPE) system has been introduced by integration of hydrogen evolution reaction (HER) in cathodic pole and electrochemiluminescence (ECL) of luminol loaded within the MIL-53(Fe)-NH2 (L@MIL-53(Fe)-NH2) in the anodic pole. The cathode of the BPE was electrochemically synthesized by 3D porous copper foam, followed by decorating with nitrogen-doped graphene nanosheet and ruthenium nanoparticles. As an alternative, we employed carboxylate-modified magnetic nanoparticles (MNPs) for immobilization of the primary antibody (Ab1) and utilized the L@MIL-53(Fe)-NH2 conjugated to secondary antibody (Ab2) as a signaling probe and coreaction accelerator. After sandwiching the target PSA between Ab1 and Ab2, the MNP/Ab1-PSA-Ab2/L@MIL-53(Fe) were introduced to a gold anodic BPE. Finally, the resulting ECL of luminol and H2O2 at the anodic poles was monitored using a photomultiplier tube (PMT) or digital camera. The PMT and visual (camera)-based detections showed linear responses from 1 pg mL-1 to 300 ng mL-1 (limit of detection 0.2 pg mL-1) and 5 pg mL-1 to 200 ng mL-1 (limit of detection 0.1 pg mL-1), respectively. This strategy provides an effective method for high-performance bioanalysis and opens a new door toward the development of the highly sensitive and user-friendly device.

Extraction and determination of trace amounts of three anticancer pharmaceuticals in urine by three-phase hollow fiber liquid-phase microextraction based on two immiscible organic solvents followed by high-performance liquid chromatography.

An automated three-phase hollow fiber liquid-phase microextraction based on two immiscible organic solvents followed by high-performance liquid chromatography with UV-Vis detection method was applied for the extraction and determination of exemestane, letrozole, and paclitaxel in water and urine samples. n-Dodecane was selected as the supported liquid membrane and its polarity was justified by trioctylphosphine oxide. Acetonitrile was used as an organic acceptor phase with desirable immiscibility having n-dodecane. All the effective parameters of the microextraction procedure such as type of the organic acceptor phase, the supported liquid membrane composition, extraction time, pH of the donor phase, hollow fiber length, stirring rate, and ionic strength were evaluated and optimized separately by a one variable at-a-time method. Under the optimal conditions, the linear dynamic ranges were 1.8-200 (R2  = 0.9991), 0.9-200 (R2  = 0.9987) and 1.2-200 µg/L (R2  = 0.9983), and the limits of detection were 0.6, 0.3, and 0.4 µg/L for exemestane, letrozole, and paclitaxel, respectively. To evaluate the capability of the proposed method in the analysis of biological samples, three different urinary samples were analyzed under the optimal conditions. The relative recoveries of the three pharmaceuticals were in the range of 91-107.3% for these three analytes.

Voltammetric determination of 4-nitrophenol using a glassy carbon electrode modified with a gold-ZnO-SiO2 nanostructure.

A nanostructured material of the type Au-ZnO-SiO2 is described that consists of ZnO and gold nanoparticles (NPs) dispersed into a silica matrix and used to construct a voltammetric sensor for 4-nitrophenol. The AuNPs and ZnO NPs are anchored onto the silica network which warrants the nanostructures to be stable in various environments. It also facilitates the electron transfer between the electrolyte and the glassy carbon electrode (GCE). The properties of the nanostructure as a modifier for the GCE were investigated by energy dispersive spectrometry, X-ray diffraction spectroscopy, and transmission electron microscopy. It is shown that the nanostructure increases the surface area. Hence, the cathodic and anodic current in differential pulse voltammetry of 4-nitrophenol are considerably enhanced in comparison to a bare GCE. Under optimum conditions, the currents for oxidation and reduction are proportional to the concentration of 4-nitrophenol in the 0.05-3.5 µM and 0.01-1.2 µM concentration ranges, with 13.7 and 2.8 nM detection limits, respectively. The sensor has excellent sensitivity, fast response, long-term stability, and good reproducibility. It is perceived to be a valuable tool for monitoring 4-nitrophenol in real water samples. Graphical abstract Schematic of voltammetric sensor for 4-nitrophenol. It is based on GCE modified with gold-ZnO-SiO2 nanostructure. It exhibited the improvement in performance for both oxidation and reduction peaks in terms of linearity, concentration range, detection limit, and sensitivity.

A nanocomposite prepared from a zinc-based metal-organic framework and polyethersulfone as a novel coating for the headspace solid-phase microextraction of organophosphorous pesticides.

The authors describe a zinc-based metal-organic framework/polyethersulfone nanocomposite (TMU-4/PES) coating deposited on a stainless steel wire via a single-phase inversion method. The nanocomposite represents a novel fiber coating for headspace solid-phase microextraction of organophosphorous pesticides (OPPs) from environmental water and soil samples. The synergistic effects of the high surface area and unique porous structure of TMU-4 as well as the rich π electron stacking and mechanical attributes of the PES polymer result in a high affinity of the composite for OPPs. Following thermal desorption, the OPPS were quantified by gas chromatography with a nitrogen-phosphorus detector. The preparation of the coating is simple, and the coated fiber is highly stable and reusable in that it can be used in about 100 consecutive extractions/desorption cycles. A central composite design was used for assessing the effect of the experimental parameters on the extraction process. Under optimized conditions, the limits of detection are in the 5-8 ng mL-1 range for the OPPs diazinon, fenitrothion, malathion and chlorpyrifos. The average repeatability and fiber-to-fiber reproducibility are 6.5% and 8.7%, respectively. The method was applied to the trace determination of OPPs in (spiked) water and soil samples where it gave good recovery (88-108%) and satisfactory reproducibility (5.9-10.1%). Graphical abstract A zinc-based metal-organic framework/polyethersulfone nanocomposite coating was prepared on a stainless steel wire via phase inversion. It was used as a novel fiber coating for headspace solid phase microextraction of organophosphorous pesticides from water and soil samples.

Fabrication of a Novel Highly Sensitive and Selective Immunosensor for Botulinum Neurotoxin Serotype A Based on an Effective Platform of Electrosynthesized Gold Nanodendrites/Chitosan Nanoparticles.

In this work, a novel nanocomposite consisting of electrosynthesized gold nanodendrites and chitosan nanoparticles (AuNDs/CSNPs) has been prepared to fabricate an impedimetric immunosensor based on a screen printed carbon electrode (SPCE) for the rapid and sensitive immunoassay of botulinum neurotoxin A (BoNT/A). BoNT/A polyclonal antibody was immobilized on the nanocomposite-modified SPCE for the signal amplification. The structure of the prepared nanocomposite was investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The charge transfer resistance (RCT) changes were used to detect BoNT/A as the specific immuno-interactions at the immunosensor surface that efficiently limited the electron transfer of Fe(CN)63-/4- as a redox probe at pH = 7.4. A linear relationship was observed between the %∆RCT and the concentration logarithm of BoNT/A within the range of 0.2 to 230 pg·mL-1 with a detection limit (S/N = 3) of 0.15 pg·mL-1. The practical applicability of the proposed sensor was examined by evaluating the detection of BoNT/A in milk and serum samples with satisfactory recoveries. Therefore, the prepared immunosensor holds great promise for the fast, simple and sensitive detection of BoNT/A in various real samples.

Graphene oxide assisted electromembrane extraction with gas chromatography for the determination of methamphetamine as a model analyte in hair and urine samples.

In the present study, graphene oxide reinforced two-phase electromembrane extraction (EME) coupled with gas chromatography was applied for the determination of methamphetamine as a model analyte in biological samples. The presence of graphene oxide in the hollow fiber wall can increase the effective surface area, interactions with analyte and polarity of support liquid membrane that leads to an enhancement in the analyte migration. To investigate the influence of the presence of graphene oxide in the support liquid membrane on the extraction efficiency, a comparative study was performed between graphene oxide and graphene oxide/EME methods. The extraction parameters such as type of organic solvent, pH of the donor phase, stirring speed, time, voltage, salt addition and the concentration of graphene oxide were optimized. Under the optimum conditions, the proposed microextraction technique provided low limit of detection (2.4 ng/mL), high preconcentration factor (195-198) and high relative recovery (95-98.5%). Finally, the method was successfully employed for the determination of methamphetamine in urine and hair samples.

Magnetic molecularly imprinted composite for the selective solid-phase extraction of p-aminosalicylic acid followed by high-performance liquid chromatography with ultraviolet detection.

A new method for the selective extraction of p-aminosalicylic acid from aqueous and urine samples has been developed using magnetic molecularly imprinted polymer nanoparticles before determination by high-performance liquid chromatography. The Fe3 O4 nanoparticles were first prepared through the chemical coprecipitation of Fe2+ and Fe3+ and then coated with a vinyl shell. Subsequently, a layer of molecularly imprinted polymers was grafted onto the vinyl-modified magnetic nanoparticles by precipitation polymerization. FTIR spectroscopy, scanning electron microscopy, vibrating sample magnetometry, and thermogravimetric analysis were applied to characterize the sorbent properties. Moreover, the predominant parameters affecting the magnetic solid phase extraction such as sample pH, sorption and elution times, the amount of sorbent, and composition and volume of eluent were investigated thoroughly. The maximum sorption capacity of the imprinted polymer toward p-aminosalicylic acid was 70.9 mg/g, which is 4.5 times higher than that of the magnetic nonimprinted polymer. The magnetic molecularly imprinted polymer nanoparticles were applied for the selective extraction of p-aminosalicylic acid from aqueous and urine samples and satisfactory results were achieved. The results illustrate that magnetic molecularly imprinted polymer nanoparticles have a great potential in the extraction of p-aminosalicylic acid from environmental and biological matrices.

Al2O3 nanoparticles: an efficient and recyclable nanocatalyst for the rapid synthesis of N-heteroaryl formamides under solvent-free conditions.

A series of N-heteroaryl formamides were efficiently synthesized from heteroarylamines and formic acid using Al2O3 nanoparticles as a heterogeneous catalyst under solvent-free conditions. The smaller size of Al2O3 nanoparticles with a higher surface to volume ratio has a promising catalytic activity, resulting in a short reaction times and high reaction yields under mild reaction conditions. The catalyst could be recycled and reused four times without a noticeable decrease in its activity.

Ti3C2 MXene-based nanozyme as coreaction accelerator for enhancing electrochemiluminescence of glucose biosensing.

Delamination of the exfoliated multilayer MXenes with electro-catalysts, not only leads to increasing surface area for high electrochemiluminescent (ECL) signal tracer loading but also provides highly sensitive achievements in a coreaction accelerator manner. To this end, herein, we used bromophenol blue (BPB)-delaminated multilayer Ti3C2 MXene as both a coreaction accelerator to promote the electrochemiluminescent (ECL) reaction rate of luminol (LUM) and the co-reactant H2O2 and a substrate for retaining high loading of glucose oxidase (GOx)-conjugated polyethylene imine (PEI) along with luminophore species into more open structure of Ti3C2 MXene for sensitive detection of glucose. In the presence of glucose, in situ generating H2O2 product through a GOx-catalyzed process could produce abundant •OH radicals via the peroxidase-like activity of the BPB@Ti3C2 in the LUM ECL reaction. Moreover, decreasing the distance between the high-content LUM into the BPB@Ti3C2 and the generated •OH, minimizes the decomposition of highly active •OH, providing a superb ECL signal. Last, the proximity of incorporated GOx into the delaminated Ti3C2 MXene near the electrode allows efficient electron transfer between the electrode and enzyme. The integration of such amplifying effects endowed high sensitivity and excellent selectivity for glucose with a low limit of detection of 0.02 µM in the wide range of 0.01 µM-40,000 µM, enabling the feasibility of the glucose analysis in human serum samples. Overall, the enhanced ECL based on the BPB@Ti3C2 opens a new horizon to develop highly sensitive MXene-based ECL toward the field of biosensors.

Metabolomics to investigate the effect of preconditioned mesenchymal stem cells with crocin on pulmonary epithelial cells exposed to 2-chloroethyl ethyl sulfide.

Metabolomics significantly impacts drug discovery and precise disease management. This study meticulously assesses the metabolite profiles of cells treated with Crocin, Dexamethasone, and mesenchymal stem cells (MSCs) under oxidative stress induced by 2-chloroethyl ethyl sulfide (CEES). Gas chromatography/mass spectrometry (GC/MS) analysis unequivocally identified substantial changes in 37 metabolites across the treated groups. Notably, pronounced alterations were observed in pathways associated with aminoacyl-tRNA biosynthesis and the metabolism of aspartate, serine, proline, and glutamate. These findings demonstrate the potent capacity of the analyzed treatments to effectively reduce inflammation, mitigate reactive oxygen species production, and enhance cell survival rates. SIGNIFICANCE.

High-performance strategy for the construction of electrochemical biosensor for simultaneous detection of miRNA-141 and miRNA-21 as lung cancer biomarkers.

In this study, the dual signal-labeled hairpin-structured DNA (dhDNA)-based probes have been developed to construct a novel nano-biosensor. This one hairpin-structured probe consists of a thiolated methylene blue-labeled hairpin capture probe (MB-HCP) as an inner reference probe and a ferrocene-modified anti-miRNA-21 DNA probe (Fc-AP-21). This novel integrated structure of MB-HCP and Fc-AP-21 was designed on one sensing interface for sensitive and simultaneous detection of the miRNA-141 and miRNA-21 in one single assay. The proposed strategy has a good ability to reduce the interference of environmental factors and it was designed to control the initial responses of Fc-AP to MB-HCP ((IFc/IMB)0) at a 1:1 ratio, which is desirable for further increase in the sensitivity and signal-to-noise ratio of the biosensor operation. Besides, the biosensor was first prepared by immobilizing the dhDNA (Fc-AP-21/MB-HCP) onto the modified glassy carbon electrode. After hybridization with the anti-miRNA-141 complementary sequence (ACP-141), the dhDNA structure was compelled to open and form the final structure of the biosensor. Also, the miRNA-141 and miRNA-21 dissociate duplex structures due to the highly matched sequences between the miRNA-141 and ACP-141 and the miRNA-21 and Fc-AP-21. A linear relationship was found between the logarithm of miRNA-141 and miRNA-21 concentrations and the signal changes. This feature was used to detect the two miRNAs. This sensitive biosensor provided low detection limits of 0.89 and 1.24 fM for the miRNA-141 and miRNA-21, respectively. Also, it has wide linear ranges of 2.0 to 105 fM, with highly selective and accurate results for its application in plasma samples. Therefore, this strategy can be promising as a suitable platform for simultaneous and early detection of various cancer biomarkers.

Accelerating synergistic effects of preconditioned mesenchymal stem cells with Crocin and dexamethasone in pulmonary epithelial cells injury.

Chemical warfare victims suffer from bronchiolitis and chronic pulmonary obstruction caused by sulfur mustard (SM) toxicity. Despite the mesenchymal stem cells capacity to alleviate inflammation, their low survival rate under oxidative stress severely limits their effectiveness. This study aimed to examine how natural (Crocin) and synthetic (Dexamethasone) antioxidants might affect MSC efficacy. MSCs were treated with the optimal doses of Crocin (Cr.), Dexamethasone (Dex.), and their combination. The A549 cells line was pretreated with the optimal dose of the CEES to mimic the lung disease. Then, the affected A549 cells were exposed to the preconditioned MSCs and conditioned media, and then their survival rates were estimated by MTTor2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. Annexin-V PI apoptosis test was conducted for MSCs and A549 cells. Reactive Oxygen Species (ROS) assay and Enzyme-linked immunosorbent assay (ELISA) test demonstrated the percentage of production of ROS and the cytokines levels in A549/CEES, respectively. The results revealed significant increases in Cr. + Dex. treated MSCs (P < .01) and A549 cells treated with MSCs-CM/Cr/Dex (P < .01) groups' survival. The apoptosis rate and ROS production were reduced in the MSCs-CM/Cr/Dex. Also, considerable decreases in IL-1ß (P < .01) and IL-6 (P < .01) and a significant increase in IL-10 (P < .05) in treated A549/CEES by Cr/Dex and MSCs-CM/Cr/Dex supported the synergistic effects of Crocin and Dexamethasone.