Thermal transport across twin grain boundaries in polycrystalline graphene from nonequilibrium molecular dynamics simulations.

We have studied the thermal conductance of tilt grain boundaries in graphene using nonequilibrium molecular dynamics simulations. When a constant heat flux is allowed to flow, we observe sharp jumps in temperature at the boundaries, characteristic of interfaces between materials of differing thermal properties. On the basis of the magnitude of these jumps, we have computed the boundary conductance of twin grain boundaries as a function of their misorientation angles. We find the boundary conductance to be in the range 1.5 × 10(10) to 4.5 × 10(10) W/(m(2) K), which is significantly higher than that of any other thermoelectric interfaces reported in the literature. Using the computed values of boundary conductances, we have identified a critical grain size of 0.1 µm below which the contribution of the tilt boundaries to the conductivity becomes comparable to that of the contribution from the grains themselves. Experiments to test the predictions of our simulations are proposed.

Crystallographic character of grain boundaries resistant to hydrogen-assisted fracture in Ni-base alloy 725.

Hydrogen embrittlement (HE) causes sudden, costly failures of metal components across a wide range of industries. Yet, despite over a century of research, the physical mechanisms of HE are too poorly understood to predict HE-induced failures with confidence. We use non-destructive, synchrotron-based techniques to investigate the relationship between the crystallographic character of grain boundaries and their susceptibility to hydrogen-assisted fracture in a nickel superalloy. Our data lead us to identify a class of grain boundaries with striking resistance to hydrogen-assisted crack propagation: boundaries with low-index planes (BLIPs). BLIPs are boundaries where at least one of the neighboring grains has a low Miller index facet-{001}, {011}, or {111}-along the grain boundary plane. These boundaries deflect propagating cracks, toughening the material and improving its HE resistance. Our finding paves the way to improved predictions of HE based on the density and distribution of BLIPs in metal microstructures.

Preparation and characterization of aligned porous PCL/zein scaffolds as drug delivery systems via improved unidirectional freeze-drying method.

A novel type of drug-delivery scaffold based on poly(ε-caprolactone) (PCL) and zein blends was prepared by improved unidirectional freeze-drying. Scaffolds with tube-like pore structure and high porosity, up to 89%, were obtained by adjusting the concentration of the PCL and zein solutions. Characters of the prepared scaffolds, such as microstructural, porosity, and compressive strength, were evaluated. The hydrophilicity and the degradability of the composite films were investigated in contact with phosphate buffer saline (PBS). It was found that the presence of zein accelerates the degradation rate of the scaffolds in the period time of investigation (28days). The results showed an acceptable way for controlling the in vitro degradation behavior of PCL composite scaffolds by adapting the concentration of zein. In vitro protein release and degradation results revealed that the absolute weight loss of the PCL/zein scaffolds exhibited an increasing trend by increasing the amount of zein concentration in the scaffolds. The drug delivery capability of the scaffolds was tested using tetracycline hydrochloride (TCH). Sustained release of the drug was obtained, and it was found that the proportion of zein in the scaffold had a great impact on the drug release kinetics. The results demonstrated the potential of the PCL/zein biocomposite scaffolds as a suitable candidate in tissue engineering strategies for bone defect treatment.

Mechanical properties and drug release behavior of PCL/zein coated 45S5 bioactive glass scaffolds for bone tissue engineering application.

This article presents data related to the research article entitled "The effect of coating type on mechanical properties and controlled drug release of PCL/zein coated 45S5 bioactive glass scaffolds for bone tissue engineering" [1]. We provide data on mechanical properties, in vitro bioactivity and drug release of bioactive glass (BG) scaffolds coated by poly (ε-caprolactone) (PCL) and zein used as a controlled release device for tetracycline hydrochloride (TCH). By coating the BG scaffolds with PCL or PCL/zein blend the mechanical properties of the scaffolds were substantially improved, i.e., the compressive strength increased from 0.004±0.001 MPa (uncoated BG scaffolds) to 0.15±0.02 MPa (PCL/zein coated BG scaffolds). A dense bone-like apatite layer formed on the surface of PCL/zein coated scaffolds immersed for 14 days in simulated body fluid (SBF). The data describe control of drug release and in vitro degradation behavior of coating by engineering the concentration of zein. Thus, the developed scaffolds exhibit attractive properties for application in bone tissue engineering research.

Structural evolution during the reduction of chemically derived graphene oxide.

The excellent electrical, optical and mechanical properties of graphene have driven the search to find methods for its large-scale production, but established procedures (such as mechanical exfoliation or chemical vapour deposition) are not ideal for the manufacture of processable graphene sheets. An alternative method is the reduction of graphene oxide, a material that shares the same atomically thin structural framework as graphene, but bears oxygen-containing functional groups. Here we use molecular dynamics simulations to study the atomistic structure of progressively reduced graphene oxide. The chemical changes of oxygen-containing functional groups on the annealing of graphene oxide are elucidated and the simulations reveal the formation of highly stable carbonyl and ether groups that hinder its complete reduction to graphene. The calculations are supported by infrared and X-ray photoelectron spectroscopy measurements. Finally, more effective reduction treatments to improve the reduction of graphene oxide are proposed.