The impact of COVID-19 pandemic in patients with a diagnosis of Oral Lichen Planus: Pain perception and psychological profile analysis.

OBJECTIVES: To assess the impact of COVID-19 in patients affected by OLP, in terms of level of pain, stress, depression and anxiety and their impact on the clinical manifestation of the disease. MATERIAL AND METHODS: A longitudinal design was employed. Psychometric evaluations of anxiety, stress, and depression were conducted using the DASS21 scale, while pain levels were measured using the VAS scale. Clinical diagnosis and phenotype evaluation were performed. RESULTS: The study included 24 patients with an average age of 62.9 years, with 70.8% presenting erosive OLP. Results revealed a significant worsening of anxiety, stress, and depression scores during the pandemic. Pain level (1.5 ± 1.2 pre-pandemic VS 3.8 ± 1.1 during the pandemic, p < 0.0001) was also negatively affected. CONCLUSIONS: These findings highlight the potential interplay between psychological stress and oral health conditions, emphasizing the need for a comprehensive understanding of OLP's complex etiology and its response to external stressors. CLINICAL RELEVANCE: Multidisciplinary care strategies to address both physical and psychological aspects of OLP patients is recommended following the present findings. Further research is warranted to confirm these observations in larger multicenter studies and to guide tailored guidance approaches for OLP patients during challenging times.

Repurposing of Loperamide as a New Drug With Anticancer Activity for Human Osteosarcoma.

BACKGROUND/AIM: Osteosarcoma is an aggressive malignant bone tumor, with unfavorable outcomes in patients with metastatic and recurrent disease. To improve patient survival new treatment options are needed. By using the drug repurposing approach, which takes advantage of already approved drugs with non-oncology primary use, we investigated the activity of loperamide, a peripheral opiate receptor agonist, a drug widely used in clinical practice to treat acute non-specific and chronic diarrhea, on human osteosarcoma. MATERIALS AND METHODS: Human osteosarcoma cell lines (143B, Saos-2, HOS and MG-63) and multidrug-resistant MG-63DXR30 cells were treated with loperamide. Proliferation and cell viability were determined by viable cell count and acid phosphatase assay. Loperamide activity on cell cycle and apoptosis induction were evaluated by flow cytometry and a luminescence assay testing caspase 3/7 activity, respectively. RESULTS: Loperamide significantly inhibited cell proliferation, through alteration of cell cycle profile at G0/G1 phase and apoptotic death in human osteosarcoma cells. Furthermore, loperamide significantly inhibited the growth of multidrug-resistant osteosarcoma cells. CONCLUSION: Our findings provide new perspectives for loperamide and its therapeutic repositioning for the treatment of osteosarcoma.

Association between Bone Turnover Markers and Fracture Healing in Long Bone Non-Union: A Systematic Review.

Background: Fracture healing is a very complex and well-orchestrated regenerative process involving many cell types and molecular pathways. Despite the high efficiency of this process, unsatisfying healing outcomes, such as non-union, occur for approximately 5-10% of long bone fractures. Although there is an obvious need to identify markers to monitor the healing process and to predict a potential failure in callus formation to heal the fracture, circulating bone turnover markers' (BTMs) utility as biomarkers in association with radiographic and clinical examination still lacks evidence so far. Methods: A systematic review on the association between BTMs changes and fracture healing in long bone non-union was performed following PRISMA guidelines. The research papers were identified via the PubMed, Cochrane, Cinahl, Web of Science, Scopus, and Embase databases. Studies in which the failure of fracture healing was associated with osteoporosis or genetic disorders were not included. Results: A total of 172 studies were collected and, given the inclusion criteria, 14 manuscripts were included in this review. Changes in circulating BTMs levels were detected during the healing process and across groups (healed vs. non-union patients and healthy vs. patients with non-union). However, we found high heterogeneity in patients' characteristics (fracture site, gender, and age) and in sample scheduling, which made it impossible to perform a meta-analysis. Conclusions: Clinical findings and radiographic features remain the two important components of non-union diagnosis so far. We suggest improving blood sample standardization and clinical data collection in future research to lay the foundations for the effective use of BTMs as tools for diagnosing non-union.

Treatment of peri-implant mucositis: Adjunctive effect of glycine powder air polishing to professional mechanical biofilm removal. 12 months randomized clinical study.

INTRODUCTION: To evaluate the adjunctive effect of glycine-powder air-polishing (GPAP) to full-mouth ultrasonic debridement (Fm-UD) in the treatment of peri-implant mucositis, and to determine the impact of implant and patient-level variables for disease resolution. METHODS: Individuals with a diagnosis of peri-implant mucositis were consecutively included in this randomized parallel arm clinical study. All the participants received a session of Fm-UD. Only implants allocated to the test group were additionally treated with GPAP. Clinical assessments were recorded at baseline, at 3 and at 12 months following intervention. The primary outcomes were complete disease resolution (DR1), defined as absence of bleeding sites at probing per implants, and partial disease resolution (DR2), measured as the presence of less than two bleeding sites at probing per implant. A final logistic multivariate regression model was built to evaluate the predictive role of implant and patient-level variables on DR. RESULTS: Fifty two patients and 157 implants were included. Both groups displayed significant reduction in the extent of bleeding on probing and plaque levels. At 12 months, DR1 was achieved in 16% and 27% of participants for the test and the control group respectively. IDR1 was best predicted by the number of bleeding sites (OR = 2.7, p = 0.04) and the greatest PPD value (OR = 2.7, p = 0.05), while IDR2 by the prosthetic connection (OR = 2.59, p = 0.02), the mean PPD (OR = 2.23, p = 0.04), the FMBS (OR = 4.09, p = 0.04), and number of implants (OR = 4.59, p = 0.02). CONCLUSIONS: Despite significant improvements of clinical signs of peri-implant inflammation, the use of GPAP appears to have no adjunctive effect as compared with Fm-UD alone in the achievement of DR. Elevated initial levels of bleeding and PD predicted inferior likelihood of reaching disease resolution. The present randomized parallel arm clinical study was registered on Clinicaltrials.gov and received the following registration number: NCT05801315. This clinical trial was not registered prior to participant recruitment and randomization (https://register. CLINICALTRIALS: gov/prs/app/action/SelectProtocol?sid=S0009965&selectaction=Edit&uid=U0004FXM&ts=2&cx=fje7l8).

Advantages and limitations of using cell viability assays for 3D bioprinted constructs.

Bioprinting shows promise for bioengineered scaffolds and three-dimensional (3D) disease models, but assessing the viability of embedded cells is challenging. Conventional assays are limited by the technical problems that derive from using multi-layered bioink matrices dispersing cells in three dimensions. In this study, we tested bioprinted osteogenic bioinks as a model system. Alginate- or gelatin-based bioinks were loaded with/without ceramic microparticles and osteogenic cells (bone tumor cells, with or without normal bone cells). Despite demonstrating 80%-90% viability through manual counting and live/dead staining, this was time-consuming and operator-dependent. Moreover, for the alginate-bioprinted scaffold, cell spheroids could not be distinguished from single cells. The indirect assay (alamarBlue), was faster but less accurate than live/dead staining due to dependence on hydrogel permeability. Automated confocal microscope acquisition and cell counting of live/dead staining was more reproducible, reliable, faster, efficient, and avoided overestimates compared to manual cell counting by optical microscopy. Finally, for 1.2 mm thick 3D bioprints, dual-photon confocal scanning with vital staining greatly improved the precision of the evaluation of cell distribution and viability and cell-cell interactions through thez-axis. In summary, automated confocal microscopy and cell counting provided superior accuracy for the assessment of cell viability and interactions in 3D bioprinted models compared to most commonly and currently used techniques.

Osteoblast and osteoclast activity on collagen-based 3D printed scaffolds enriched with strontium-doped bioactive glasses and hydroxyapatite nanorods for bone tissue engineering.

Bone tissue engineering (BTE) aims to promote bone regeneration by means of the synergistic effect of biomaterials, cells, and other factors, as potential alternative to conventional treatments for bone fractures. To this aim, a composite material was developed, based on collagen type I, strontium-enriched mesoporous bioactive glasses, and hydroxyapatite nanoparticles as bioactive and biomimetic components. Nanostructured scaffolds were 3D printed and subsequently chemically crosslinked with genipin to improve mechanical properties and stability. The developed nanostructured system was maintained in culture until 3 weeks with a co-culture of human bone cells to provide an ex vivo model of bone microenvironment and examine the cellular crosstalk and signaling pathways through paracrine cell activities. Human osteoblasts (OBs), derived from trabecular bone, and human osteoclast precursors (OCs), isolated from buffy coat samples were involved, with OBs seeded on the scaffold and OCs precursors seeded in a transwell device. When compared to the material without inorganic components, the bioactive and biomimetic scaffold positively influenced cell proliferation and cell metabolic activity, boosting alkaline phosphatase activity of osteoblasts, and reducing osteoclast differentiation. Thus, the bioactive and biomimetic system promoted an enhanced cellular response, highlighting its potential application in bone tissue engineering. .

New strontium-based coatings show activity against pathogenic bacteria in spine infection.

Infections of implants and prostheses represent relevant complications associated with the implantation of biomedical devices in spine surgery. Indeed, due to the length of the surgical procedures and the need to implant invasive devices, infections have high incidence, interfere with osseointegration, and are becoming increasingly difficult to threat with common therapies due to the acquisition of antibiotic resistance genes by pathogenic bacteria. The application of metal-substituted tricalcium phosphate coatings onto the biomedical devices is a promising strategy to simultaneously prevent bacterial infections and promote osseointegration/osseoinduction. Strontium-substituted tricalcium phosphate (Sr-TCP) is known to be an encouraging formulation with osseoinductive properties, but its antimicrobial potential is still unexplored. To this end, novel Sr-TCP coatings were manufactured by Ionized Jet Deposition technology and characterized for their physiochemical and morphological properties, cytotoxicity, and bioactivity against Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P human pathogenic strains. The coatings are nanostructured, as they are composed by aggregates with diameters from 90 nm up to 1 µm, and their morphology depends significantly on the deposition time. The Sr-TCP coatings did not exhibit any cytotoxic effects on human cell lines and provided an inhibitory effect on the planktonic growth of E. coli and S. aureus strains after 8 h of incubation. Furthermore, bacterial adhesion (after 4 h of exposure) and biofilm formation (after 24 h of cell growth) were significantly reduced when the strains were cultured on Sr-TCP compared to tricalcium phosphate only coatings. On Sr-TCP coatings, E. coli and S. aureus cells lost their organization in a biofilm-like structure and showed morphological alterations due to the toxic effect of the metal. These results demonstrate the stability and anti-adhesion/antibiofilm properties of IJD-manufactured Sr-TCP coatings, which represent potential candidates for future applications to prevent prostheses infections and to promote osteointegration/osteoinduction.

A natural biogenic fluorapatite as a new biomaterial for orthopedics and dentistry: antibacterial activity of lingula seashell and its use for nanostructured biomimetic coatings.

Calcium phosphates are widely studied in orthopedics and dentistry, to obtain biomimetic and antibacterial implants. However, the multi-substituted composition of mineralized tissues is not fully reproducible from synthetic procedures. Here, for the first time, we investigate the possible use of a natural, fluorapatite-based material, i.e., Lingula anatina seashell, resembling the composition of bone and enamel, as a biomaterial source for orthopedics and dentistry. Indeed, thanks to its unique mineralization process and conditions, L. anatina seashell is among the few natural apatite-based shells, and naturally contains ions having possible antibacterial efficacy, i.e., fluorine and zinc. After characterization, we explore its deposition by ionized jet deposition (IJD), to obtain nanostructured coatings for implantable devices. For the first time, we demonstrate that L. anatina seashells have strong antibacterial properties. Indeed, they significantly inhibit planktonic growth and cell adhesion of both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. The two strains show different susceptibility to the mineral and organic parts of the seashells, the first being more susceptible to zinc and fluorine in the mineral part, and the second to the organic (chitin-based) component. Upon deposition by IJD, all films exhibit a nanostructured morphology and sub-micrometric thickness. The multi-doped, complex composition of the target is maintained in the coating, demonstrating the feasibility of deposition of coatings starting from biogenic precursors (seashells). In conclusion, Lingula seashell-based coatings are non-cytotoxic with strong antimicrobial capability, especially against Gram-positive strains, consistently with their higher susceptibility to fluorine and zinc. Importantly, these properties are improved compared to synthetic fluorapatite, showing that the films are promising for antimicrobial applications.

A Multidisciplinary Evaluation of Three-Dimensional Polycaprolactone Bioactive Glass Scaffolds for Bone Tissue Engineering Purposes.

In the development of bone graft substitutes, a fundamental step is the use of scaffolds with adequate composition and architecture capable of providing support in regenerative processes both on the tissue scale, where adequate resistance to mechanical stress is required, as well as at the cellular level where compliant chemical-physical and mechanical properties can promote cellular activity. In this study, based on a previous optimization study of this group, the potential of a three-dimensional construct based on polycaprolactone (PCL) and a novel biocompatible Mg- and Sr-containing glass named BGMS10 was explored. Fourier-transform infrared spectroscopy and scanning electron microscopy showed the inclusion of BGMS10 in the scaffold structure. Mesenchymal stem cells cultured on both PCL and PCL-BGMS10 showed similar tendencies in terms of osteogenic differentiation; however, no significant differences were found between the two scaffold types. This circumstance can be explained via X-ray microtomography and atomic force microscopy analyses, which correlated the spatial distribution of the BGMS10 within the bulk with the elastic properties and topography at the cell scale. In conclusion, our study highlights the importance of multidisciplinary approaches to understand the relationship between design parameters, material properties, and cellular response in polymer composites, which is crucial for the development and design of scaffolds for bone regeneration.

Ionized jet deposition of silver nanostructured coatings: Assessment of chemico-physical and biological behavior for application in orthopedics.

Infection is one of the main issues connected to implantation of biomedical devices and represents a very difficult issue to tackle, for clinicians and for patients. This study aimed at tackling infection through antibacterial nanostructured silver coatings manufactured by Ionized Jet Deposition (IJD) for application as new and advanced coating systems for medical devices. Films composition and morphology depending on deposition parameters were investigated and their performances evaluated by correlating these properties with the antibacterial and antibiofilm efficacy of the coatings, against Escherichia coli and Staphylococcus aureus strains and with their cytotoxicity towards human cell line fibroblasts. The biocompatibility of the coatings, the nanotoxicity, and the safety of the proposed approach were evaluated, for the first time, in vitro and in vivo by rat subcutaneous implant models. Different deposition times, corresponding to different thicknesses, were selected and compared. All silver coatings exhibited a highly homogeneous surface composed of nanosized spherical aggregates. All coatings having a thickness of 50 nm and above showed high antibacterial efficacy, while none of the tested options caused cytotoxicity when tested in vitro. Indeed, silver films impacted on bacterial strains viability and capability to adhere to the substrate, in a thickness-dependent manner. The nanostructure obtained by IJD permitted to mitigate the toxicity of silver, conferring strong antibacterial and anti-adhesive features, without affecting the coatings biocompatibility. At the explant, the coatings were still present although they showed signs of progressive dissolution, compatible with the release of silver, but no cracking, delamination or in vivo toxicity was observed.