Effect of Bi2MoO6 Morphology on Adsorption and Visible-Light-Driven Degradation of 2,4-Dichlorophenoxyacetic Acid.

The development of highly efficient and stable visible-light-driven photocatalysts for the removal of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) from water is still a challenge. In this work, Bi2MoO6 (BMO) materials with different morphology were successfully prepared via a simple hydrothermal method by altering the solvent. The morphology of the BMO material is mainly influenced by the solvent used in the synthesis (H2O, ethanol, and ethylene glycol or their mixtures) and to a lesser extent by subsequent thermal annealing. BMO with aggregated spheres and nanoplate-like structures hydrothermally synthesized in ethylene glycol (EG) and subsequently calcined at 400 °C (BMO-400 (EG)) showed the highest adsorption capacity and photocatalytic activity compared to other synthesized morphologies. Complete degradation of 2,4-D on BMO upon irradiation with a blue light-emitting diode (LED, λmax = 467 nm) was reached within 150 min, resulting in 2,4-dichlorophenol (2,4-DCP) as the main degradation product. Holes (h+) and superoxide radicals (⋅O2-) are assumed to be the reactive species observed for the rapid conversion of 2,4-D to 2,4-DCP. The addition of H2O2 to the reaction mixture not only accelerates the degradation of 2,4-DCP but also significantly reduces the total organic carbon (TOC) content, indicating that hydroxyl radicals are crucial for the rapid mineralization of 2,4-D. Under optimal conditions, the TOC value was reduced by 84.5% within 180 min using BMO-400 (EG) and H2O2. The improved degradation performance of BMO-400 (EG) can be attributed to its particular morphology leading to lower charge transfer resistance, higher electron-hole separation, and larger specific surface area.

Development of Iron-Based Single Atom Materials for General and Efficient Synthesis of Amines.

Earth abundant metal-based heterogeneous catalysts with highly active and at the same time stable isolated metal sites constitute a key factor for the advancement of sustainable and cost-effective chemical synthesis. In particular, the development of more practical, and durable iron-based materials is of central interest for organic synthesis, especially for the preparation of chemical products related to life science applications. Here, we report the preparation of Fe-single atom catalysts (Fe-SACs) entrapped in N-doped mesoporous carbon support with unprecedented potential in the preparation of different kinds of amines, which represent privileged class of organic compounds and find increasing application in daily life. The optimal Fe-SACs allow for the reductive amination of a broad range of aldehydes and ketones with ammonia and amines to produce diverse primary, secondary, and tertiary amines including N-methylated products as well as drugs, agrochemicals, and other biomolecules (amino acid esters and amides) utilizing green hydrogen.

Fundamentals of Unanticipated Efficiency of Gd2O3-based Catalysts in Oxidative Coupling of Methane.

Improving the selectivity in the oxidative coupling of methane to ethane/ethylene poses a significant challenge for commercialization. The required improvements are hampered by the uncertainties associated with the reaction mechanism due to its complexity. Herein, we report about 90 % selectivity to the target products at 11 % methane conversion over Gd2O3-based catalysts at 700 °C using N2O as the oxidant. Sophisticated kinetic studies have suggested the nature of adsorbed oxygen species and their binding strength as key parameters for undesired methane oxidation to carbon oxides. These descriptors can be controlled by a metal oxide promoter for Gd2O3.

Fundamental Structural and Electronic Understanding of Palladium Catalysts on Nitride and Oxide Supports.

The nature of the support can fundamentally affect the function of a heterogeneous catalyst. For the novel type of isolated metal atom catalysts, sometimes referred to as single-atom catalysts, systematic correlations are still rare. Here, we report a general finding that Pd on nitride supports (non-metal and metal nitride) features a higher oxidation state compared to that on oxide supports (non-metal and metal oxide). Through thorough oxidation state investigations by X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), CO-DRIFTS, and density functional theory (DFT) coupled with Bader charge analysis, it is found that Pd atoms prefer to interact with surface hydroxyl group to form a Pd(OH)x species on oxide supports, while on nitride supports, Pd atoms incorporate into the surface structure in the form of Pd-N bonds. Moreover, a correlation was built between the formal oxidation state and computational Bader charge, based on the periodic trend in electronegativity.

Oxidative dehydrogenation of cyclohexene on atomically precise subnanometer Cu4-nPdn (0 ≤ n ≤ 4) tetramer clusters: the effect of cluster composition and support on performance.

The pronounced effects of the composition of four-atom monometallic Cu and Pd and bimetallic CuPd clusters and the support on the catalytic activity and selectivity in the oxidative dehydrogenation of cyclohexene are reported. The ultra-nanocrystalline diamond supported clusters are highly active and dominantly produce benzene; some of the mixed clusters also produce cyclohexadiene, which are all clusters with a much suppressed combustion channel. The also highly active TiO2-supported tetramers solely produce benzene, without any combustion to CO2. The selectivity of the zirconia-supported mixed CuPd clusters and the monometallic Cu cluster is entirely different; though they are less active in comparison to clusters with other supports, these clusters produce significant fractions of cyclohexadiene, with their selectivity towards cyclohexadiene gradually increasing with the increasing number of copper atoms in the cluster, reaching about 50% for Cu3Pd1. The zirconia-supported copper tetramer stands out from among all the other tetramers in this reaction, with a selectivity towards cyclohexadiene of 70%, which far exceeds those of all the other cluster-support combinations. The findings from this study indicate a positive effect of copper on the stability of the mixed tetramers and potential new ways of fine-tuning catalyst performance by controlling the composition of the active site and via cluster-support interactions in complex oxidative reactions under the suppression of the undesired combustion of the feed.

Development of a General and Selective Nanostructured Cobalt Catalyst for the Hydrogenation of Benzofurans, Indoles and Benzothiophenes.

The selective hydrogenation of benzofurans in the presence of a heterogeneous non-noble metal catalyst is reported. The developed optimal catalytic material consists of cobalt-cobalt oxide core-shell nanoparticles supported on silica, which has been prepared by the immobilization and pyrolysis of cobalt-DABCO-citric acid complex on silica under argon at 800 °C. This novel catalyst allows for the selective hydrogenation of simple and functionalized benzofurans to 2,3-dihydrobenzofurans as well as related heterocycles. The versatility of the reported protocol is showcased by the reduction of selected drugs and deuteration of heterocycles. Further, the stability, recycling, and reusability of the Co-nanocatalyst are demonstrated.

Tailoring Active Cu2 O/Copper Interface Sites for N-Formylation of Aliphatic Primary Amines with CO2 /H2.

Heterogeneously catalyzed N-formylation of amines to formamide with CO2 /H2 is highly attractive for the valorization of CO2 . However, the relationship of the catalytic performance with the catalyst structure is still elusive. Herein, mixed valence catalysts containing Cu2 O/Cu interface sites were constructed for this transformation. Both aliphatic primary and secondary amines with diverse structures were efficiently converted into the desired formamides with good to excellent yields. Combined ex and in situ catalyst characterization revealed that the presence of Cu2 O/Cu interface sites was vital for the excellent catalytic activity. Density functional theory (DFT) calculations demonstrated that better catalytic activity of Cu2 O/Cu(111) than Cu(111) is attributed to the assistance of oxygen at the Cu2 O/Cu interface (Ointer ) in formation of Ointer -H moieties, which not only reduce the apparent barrier of HCOOH formation but also benefit the desorption of the desired N-formylated amine, leading to high activity and selectivity.

Mild and Efficient Heterogeneous Hydrogenation of Nitroarenes Facilitated by a Pyrolytically Activated Dinuclear Ni(II)-Ce(III) Diimine Complex.

We communicate the assembly of a solid, Ce-promoted Ni-based composite that was applied as catalyst for the hydrogenation of nitroarenes to afford the corresponding organic amines. The catalytically active material described herein was obtained through pyrolysis of a SiO2-pellet-supported bimetallic Ni-Ce complex that was readily synthesized prior to use from a MeO-functionalized salen congener, Ni(OAc)2·4 H2O, and Ce(NO3)3·6 H2O. Rewardingly, the requisite ligand for the pertinent solution phase precursor was accessible upon straightforward and time-saving imine condensation of ortho-vanillin with 1,3-diamino-2,2'-dimethylpropane. The introduced catalytic protocol is operationally simple in that the whole reaction set-up is quickly put together on the bench without the need of cumbersome handling in a glovebox or related containment systems. Moreover, the advantageous geometry and compact-sized nature of the used pellets renders the catalyst separation and recycling exceptionally easy.

Manganese-Catalysed Deuterium Labelling of Anilines and Electron-Rich (Hetero)Arenes.

There is a constant need for deuterium-labelled products for multiple applications in life sciences and beyond. Here, a new class of heterogeneous catalysts is reported for practical deuterium incorporation in anilines, phenols, and heterocyclic substrates. The optimal material can be conveniently synthesised and allows for high deuterium incorporation using deuterium oxide as isotope source. This new catalyst has been fully characterised and successfully applied to the labelling of natural products as well as marketed drugs.

Supported Cobalt Nanoparticles for Hydroformylation Reactions.

Hydroformylation of olefins has been studied in the presence of specific heterogeneous cobalt nanoparticles. The catalytic materials were prepared by pyrolysis of preformed cobalt complexes deposited onto different inorganic supports. Atomic absorption spectroscopy (AAS) measurements indicated a correlation of catalyst activity and cobalt leaching as well as a strong influence of the heterogeneous support on the productivity. These new, low-cost, easy-to-handle catalysts can substitute more toxic, unstable and volatile cobalt carbonyl complexes for hydroformylations on a laboratory scale.

Bimetallic Ag-Pt Sub-nanometer Supported Clusters as Highly Efficient and Robust Oxidation Catalysts.

A combined experimental and theoretical investigation of Ag-Pt sub-nanometer clusters as heterogeneous catalysts in the CO→CO2 reaction (COox) is presented. Ag9 Pt2 and Ag9 Pt3 clusters are size-selected in the gas phase, deposited on an ultrathin amorphous alumina support, and tested as catalysts experimentally under realistic conditions and by first-principles simulations at realistic coverage. In situ GISAXS/TPRx demonstrates that the clusters do not sinter or deactivate even after prolonged exposure to reactants at high temperature, and present comparable, extremely high COox catalytic efficiency. Such high activity and stability are ascribed to a synergic role of Ag and Pt in ultranano-aggregates, in which Pt anchors the clusters to the support and binds and activates two CO molecules, while Ag binds and activates O2 , and Ag/Pt surface proximity disfavors poisoning by CO or oxidized species.

Morphological impact on the reaction kinetics of size-selected cobalt oxide nanoparticles.

Apart from large surface areas, low activation energies are essential for efficient reactions, particularly in heterogeneous catalysis. Here, we show that not only the size of nanoparticles but also their detailed morphology can crucially affect reaction kinetics, as demonstrated for mass-selected, soft-landed, and oxidized cobalt clusters in a 6 nm to 18 nm size range. The method of reflection high-energy electron diffraction is extended to the quantitative determination of particle activation energies which is applied for repeated oxidation and reduction cycles at the same particles. We find unexpectedly small activation barriers for the reduction reaction of the largest particles studied, despite generally increasing barriers for growing sizes. We attribute these observations to the interplay of reaction-specific material transport with a size-dependent inner particle morphology.

CeO2-Supported Single-Atom Cu Catalysts Modified with Fe for RWGS Reaction: Deciphering the Role of Fe in the Reaction Mechanism by In Situ/Operando Spectroscopic Techniques.

Reverse water-gas shift (RWGS) reaction has attracted much attention as a potential approach for CO2 valorization via the production of synthesis gas, especially over Fe-modified supported Cu catalysts on CeO2. However, most studies have focused solely on investigating the RWGS reaction over catalysts with high Cu and Fe loadings, thus leading to an increase in the complexity of the catalytic system and, hence, preventing the gain of any reliable information about the nature of the active sites and reaction mechanism. In this work, a CeO2-supported single-atom Cu catalyst modified with iron was synthesized and evaluated for the RWGS reaction. The catalytic results reveal a significant synergistic effect between CuCeO2 and Fe, demonstrating an activity up to three times higher than the combined catalytic activities of monometallic catalysts (Fe/CeO2 + CuCeO2) under identical conditions. Various ex situ and in situ/operando techniques are employed to unveil the concealed role of Fe in catalyst activity enhancement. The combined findings from hydrogen temperature-programmed reduction (H2-TPR) and operando electron paramagnetic resonance spectroscopy (EPR) reveal that the added Fe predominantly interacts with Cu-containing surface sites, resulting in the stabilization of higher proportions of Cu single sites. Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and operando EPR results unveil a synergistic interplay of Fe with Cu-containing sites and CeO x domains, efficiently enhancing both the reoxidation of Cu+ in Cu+-Ov-Ce3+ moieties and the reducibility of Ce4+ in CeO x domains under RWGS conditions. Detailed mechanistic studies reveal that the RWGS reaction predominantly proceeds via the redox mechanism.

Cobalt nanoparticle-catalysed N-alkylation of amides with alcohols.

A protocol for efficient N-alkylation of benzamides with alcohols in the presence of cobalt-nanocatalysts is described. Key to the success of this general methodology is the use of highly dispersed cobalt nanoparticles supported on carbon, which are obtained from the pyrolysis of cobalt(ii) acetate and o-phenylenediamine as a ligand at suitable temperatures. The catalytic material shows a broad substrate scope and good tolerance to functional groups. Apart from the synthesis of a variety of secondary amides (>45 products), the catalyst allows for the conversion of more challenging aliphatic alcohols and amides, including biobased and macromolecular amides. The practical applicability of the catalyst is underlined by the successful recycling and reusability.

Heterogenized Molecular Electrocatalyst Based on a Hydroxo-Bridged Binuclear Copper(II) Phenanthroline Compound for Selective Reduction of CO2 to Ethylene.

Molecular copper catalysts have emerged as promising candidates for the electrochemical reduction of CO2 . Notable features of such systems include the ability of Cu to generate C2+  products and the well-defined active sites that allow for targeted structural tuning. However, the frequently observed in situ formation of Cu nanoclusters has undermined the advantages of the molecular frameworks. It is therefore desirable to develop Cu-based catalysts that retain their molecular structures during electrolysis. In this context, a heterogenized binuclear hydroxo-bridged phenanthroline Cu(II) compound with a short Cu···Cu distance is reported as a simple yet efficient catalyst for electrogeneration of ethylene and other C2 products. In an aqueous electrolyte, the catalyst demonstrates remarkable performance, with excellent Faradaic efficiency for C2 products (62%) and minimal H2 evolution (8%). Furthermore, it exhibits high stability, manifested by no observable degradation during 15 h of continuous electrolysis. The preservation of the atomic distribution of the active sites throughout electrolysis is substantiated through comprehensive characterizations, including X-ray photoelectron and absorption spectroscopy, scanning and transmission electron microscopy, UV-vis spectroscopy, as well as control experiments. These findings establish a solid foundation for further investigations into targeted structural tuning, opening new avenues for enhancing the catalytic performance of Cu-based molecular electrocatalysts.

State-of-the-Art Light-Driven Hydrogen Generation from Formic Acid and Utilization in Enzymatic Hydrogenations.

A concept of combining photocatalytically generated hydrogen with green enzymatic reductions is demonstrated. The developed photocatalytic formic acid (FA) dehydrogenation setup based on Pt(x)@TiO2 shows unprecedented hydrogen generation activity, which is two orders of magnitude higher than reported values of state-of-the-art systems. Mechanistic studies confirm that hydrogen generation proceeds via a photocatalytic pathway, which is entirely different from purely thermal reaction mechanisms previously reported. The viability of the presented approach is demonstrated by the synthesis of value-added compounds 3-phenylpropanal and (2R, 5S)-dihydrocarvone at ambient pressure and room temperature, which should be applicable for many other hydrogenation processes, e.g., for the preparation of flavours and fragrance compounds, as well as pharmaceuticals.

Correction: Time-, space- and energy-resolved in situ characterization of catalysts by X-ray absorption spectroscopy.

Correction for 'Time-, space- and energy-resolved in situ characterization of catalysts by X-ray absorption spectroscopy' by Stefan Peters et al., Chem. Commun., 2023, 59, 12120-12123, https://doi.org/10.1039/D3CC03277A.

How droplets move on laser-structured surfaces: Determination of droplet adhesion forces on nano- and microstructured surfaces.

HYPOTHESIS: Lateral adhesion forces are a fundamental property of liquid-solid interactions and a key aspect of dynamic droplet mobility. But, commonly applied conventional wetting analysis is limited to static and quasi-static methods and cannot resolve dynamic and spatial liquid-solid interactions. However, droplet mobility is assumed to be affected by chemical and topographic surface inhomogeneities introduced by femtosecond laser treatment. EXPERIMENTS: In this study, we used a customized droplet adhesion force instrument to determine lateral adhesion forces on various femtosecond laser-structured surface designs to obtain a deeper understanding of the dynamic droplet motion with regard to chemical and topographic surface features. FINDINGS: We show that the droplet motion was highly affected by the chemical and topographical surface design and local inhomogeneities. The droplet mobility on femtosecond laser-structured surfaces could be classified into a static, a transfer, and a kinetic regime, which is essential for designing surfaces with extreme wetting characteristics and a wide range of scientific and industrial processes. Furthermore, with proper tailoring of surface structures and chemical modification, we were able to provoke adhesion forces on self-organized laser microstructures similar to those found on the natural lotus leaves.

A general and robust Ni-based nanocatalyst for selective hydrogenation reactions at low temperature and pressure.

Catalytic hydrogenations are important and widely applied processes for the reduction of organic compounds both in academic laboratories and in industry. To perform these reactions in sustainable and practical manner, the development and applicability of non-noble metal-based heterogeneous catalysts is crucial. Here, we report highly active and air-stable nickel nanoparticles supported on mesoporous silica (MCM-41) as a general and selective hydrogenation catalyst. This catalytic system allows for the hydrogenation of carbonyl compounds, nitroarenes, N-heterocycles, and unsaturated carbon─carbon bonds in good to excellent selectivity under very mild conditions (room temperature to 80°C, 2 to 10 bar H2). Furthermore, the optimal nickel/meso-silicon dioxide catalyst is reusable (4 cycles) without loss of its catalytic activity.

Experiment and Theory in Concert To Unravel the Remarkable Electronic Properties of Na-Doped Eu11Zn4Sn2As12: A Layered Zintl Phase.

Low-dimensional materials have unique optical, electronic, mechanical, and chemical properties that make them desirable for a wide range of applications. Nano-scaling materials to confine transport in at least one direction is a common method of designing materials with low-dimensional electronic structures. However, bulk materials give rise to low-dimensional electronic structures when bonding is highly anisotropic. Layered Zintl phases are excellent candidates for investigation due to their directional bonding, structural variety, and tunability. However, the complexity of the structure and composition of many layered Zintl phases poses a challenge for producing phase-pure bulk samples to characterize. Eu11Zn4Sn2As12 is a layered Zintl phase of significant complexity that is of interest for its magnetic, electronic, and thermoelectric properties. To prepare phase-pure Eu11-xNaxZn4Sn2As12, a binary EuAs phase was employed as a precursor, along with NaH. Experimental measurements reveal low thermal conductivity and a high Seebeck coefficient, while theoretical electronic structure calculations reveal a transition from a 3D to 2D electronic structure with increasing carrier concentration. Simulated thermoelectric properties also indicate anisotropic transport, and thermoelectric property measurements confirm the nonparabolicity of the relevant bands near the Fermi energy. Thermoelectric efficiency is known to improve as the dimensionality of the electronic structure is decreased, making this a promising material for further optimization and opening the door to further exploitation of layered Zintl phases with low-dimensional electronic structures for thermoelectric applications.