RESUMEN
ConspectusThe preparation of discrete and well-defined polymers is an emerging strategy for emulating the remarkable precision achieved by macromolecular synthesis in nature. Although modern controlled polymerization techniques have unlocked access to a cornucopia of materials spanning a broad range of monomers, molecular weights, and architectures, the word "controlled" is not to be confused with "perfect". Indeed, even the highest-fidelity polymerization techniquesâyielding molar mass dispersities in the vicinity of D = 1.05âunavoidably create a considerable degree of structural and/or compositional dispersity due to the statistical nature of chain growth. Such dispersity impacts many of the properties that researchers seek to control in the design of soft materials.The development of strategies to minimize or entirely eliminate dispersity and access molecularly precise polymers therefore remains a key contemporary challenge. While significant advances have been made in the realm of iterative synthetic methods that construct oligomers with an exact molecular weight, head-to-tail connectivity, and even stereochemistry via small-molecule organic chemistry, as the word "iterative" suggests, these techniques involve manually propagating monomers one reaction at a time, often with intervening protection and deprotection steps. As a result, these strategies are time-consuming, difficult to scale, and remain limited to lower molecular weights. The focus of this Account is on an alternative strategy that is more accessible to the general scientific community because of its simplicity, versatility, and affordability: chromatography. Researchers unfamiliar with the intricacies of synthesis may recall being exposed to chromatography in an undergraduate chemistry lab. This operationally simple, yet remarkably powerful, technique is most commonly encountered in the purification of small molecules through their selective (differential) adsorption to a column packed with a low-cost stationary phase, usually silica. Because the requisite equipment is readily available and the actual separation takes little time (on the order of 1 h), chromatography is used extensively in small-molecule chemistry throughout industry and academia alike. It is, therefore, perhaps surprising that similar types of chromatography are not more widely leveraged in the field of polymer science as well.Here, we discuss recent advances in using chromatography to control the structure and properties of polymeric materials. Emphasis is placed on the utility of an adsorption-based mechanism that separates polymers based on polarity and composition at tractable (gram) scales for materials science, in contrast to size exclusion, which is extremely common but typically analyzes very small quantities of a sample (â¼1 mg) and is limited to separating by molar mass. Key concepts that are highlighted include (1) the separation of low-molecular-weight homopolymers into discrete oligomers (D = 1.0) with precise chain lengths and (2) the efficient fractionation of block copolymers into high-quality and widely varied libraries for accelerating materials discovery. In summary, the authors hope to convey the exciting possibilities in polymer science afforded by chromatography as a scalable, versatile, and even automated technique that unlocks new avenues of exploration into well-defined materials for a diverse assortment of researchers with different training and expertise.
RESUMEN
2-Amino-2-methyl-1-propanol (AMP™) is a widely used pH stabilizer in personal care products (PCPs); thus, the safety implications of dermal AMP exposure remain of interest. We have previously reported that exposure to AMP in PCPs when used as intended is not anticipated to result in an increased risk of hepatotoxicity (primarily steatosis and altered phospholipid homeostasis). The current study focuses on AMP in PCP's potential for developmental and reproductive toxicity (DART) in humans, based on data from animal studies. Animal studies suggest that exposure to AMP can result in post-implantation loss. However, such effects occur at maternally toxic doses, posing a challenge for determining appropriate hazard classifications in the context of relevant consumer use scenarios. Our assessment concluded that human exposure to AMP in PCPs is not anticipated to result in DART at non-maternally toxic doses. Further, mode of action (MOA) analysis elucidated the potential biological pathways underlying DART effects observed in high-dose animal studies, such that perturbation of uterine choline synthesis was the most well-supported MOA hypothesis. Downstream uterine effects might reflect choline-dependent changes in epigenetic control of pathways important for implantation maintenance and uterine cell energetics. Since AMP-induced post-implantation loss occurs at doses higher than pathology related to liver toxicity, maintaining AMP exposures from exceeding the onset dose for maternal liver effects will also be protective of DART effects. Furthermore, dermal exposure to AMP expected from the use of PCPs is highly unlikely to result in toxicologically significant systemic AMP concentrations; thus, DART is not anticipated.
Asunto(s)
Propanolaminas , Reproducción , Animales , Humanos , Propanolaminas/farmacología , Implantación del Embrión , Colina/farmacologíaRESUMEN
Lithium is widely used in contemporary energy applications, but its isolation from natural reserves is plagued by time-consuming and costly processes. While polymer membranes could, in principle, circumvent these challenges by efficiently extracting lithium from aqueous solutions, they usually exhibit poor ion-specific selectivity. Toward this end, we have incorporated host-guest interactions into a tunable polynorbornene network by copolymerizing 1) 12-crown-4 ligands to impart ion selectivity, 2) poly(ethylene oxide) side chains to control water content, and 3) a crosslinker to form robust solids at room temperature. Single salt transport measurements indicate these materials exhibit unprecedented reverse permeability selectivity (â¼2.3) for LiCl over NaCl-the highest documented to date for a dense, water-swollen polymer. As demonstrated by molecular dynamics simulations, this behavior originates from the ability of 12-crown-4 to bind Na+ ions more strongly than Li+ in an aqueous environment, which reduces Na+ mobility (relative to Li+) and offsets the increase in Na+ solubility due to binding with crown ethers. Under mixed salt conditions, 12-crown-4 functionalized membranes showed identical solubility selectivity relative to single salt conditions; however, the permeability and diffusivity selectivity of LiCl over NaCl decreased, presumably due to flux coupling. These results reveal insights for designing advanced membranes with solute-specific selectivity by utilizing host-guest interactions.
RESUMEN
Here, we present the synthesis and characterization of statistical and block copolymers containing α-lipoic acid (LA) using reversible addition-fragmentation chain-transfer (RAFT) polymerization. LA, a readily available nutritional supplement, undergoes efficient radical ring-opening copolymerization with vinyl monomers in a controlled manner with predictable molecular weights and low molar-mass dispersities. Because lipoic acid diads present in the resulting copolymers include disulfide bonds, these materials efficiently and rapidly degrade when exposed to mild reducing agents such as tris(2-carboxyethyl)phosphine (Mn = 56â¯ââ¯3.6 kg mol-1). This scalable and versatile polymerization method affords a facile way to synthesize degradable polymers with controlled architectures, molecular weights, and molar-mass dispersities from α-lipoic acid, a commercially available and renewable monomer.
RESUMEN
Shear-recoverable hydrogels based on block copolypeptides with rapid self-recovery hold potential in extrudable and injectable 3D-printing applications. In this work, a series of 3-arm star-shaped block copolypeptides composed of an inner hydrophilic poly(l-glutamate) domain and an outer ß-sheet forming domain is synthesized with varying side chains and block lengths. By changing the ß-sheet forming domains, hydrogels with diverse microstructures and mechanical properties are prepared and structure-function relationships are determined using scattering and rheological techniques. Differences in the properties of these materials are amplified during direct-ink writing with a strong correlation observed between printability and material chemistry. Significantly, it is observed that non-canonical ß-sheet blocks based on phenyl glycine form more stable networks with superior mechanical properties and writability compared to widely used natural amino acid counterparts. The versatile design available through block copolypeptide materials provides a robust platform to access tunable material properties based solely on molecular design. These systems can be exploited in extrusion-based applications such as 3D-printing without the need for additives.
RESUMEN
2-Amino-2-methyl-1-propanol (AMP™) is widely used as a neutralizer/pH stabilizer in personal care products (PCPs); however, the potential health implications of dermal AMP exposure remain to be fully elucidated. Consequently, an in-depth analysis was performed to determine if PCPs containing AMP pose an elevated risk in humans under the intended use conditions. Animal studies have shown that at high doses, oral AMP exposure could lead to liver steatosis; thus, this study focused on hepatotoxicity. Our assessment revealed that the derived margin of exposure (MoE) values for AMP-containing PCPs were above 100, indicating that dermal exposure to AMP is unlikely to present an elevated risk of hepatotoxicity. Further, mode of action (MOA) analysis was conducted to elucidate the potential mechanisms underlying the observed hepatotoxicity in animal studies. Our analysis proposed that AMP interferes with the CDP-choline pathway in hepatocytes via the inhibition of one or more enzymes integral to the pathway and/or the replacement of choline in the assembly of the phospholipid unit. Ultimately, these events halt the lipid export via very low-density lipoproteins, which can subsequently develop into fatty liver accompanied by hepatotoxicity and other pathological changes if AMP exposure persists at sufficiently high doses. MOA analysis corroborated that dermal exposure to AMP expected from use of PCPs is highly unlikely to result in toxicologically significant systemic concentrations of AMP and thus hepatotoxicity. We concluded that dermal exposure to AMP in PCPs is not anticipated to result in an increased risk of hepatotoxicity.
Asunto(s)
Enfermedad Hepática Inducida por Sustancias y Drogas , Hígado Graso , Humanos , Animales , Hígado Graso/inducido químicamente , Hígado Graso/patología , Colina , Adenosina MonofosfatoRESUMEN
The self-assembly of block polymers into well-ordered nanostructures underpins their utility across fundamental and applied polymer science, yet only a handful of equilibrium morphologies are known with the simplest AB-type materials. Here, we report the discovery of the A15 sphere phase in single-component diblock copolymer melts comprising poly(dodecyl acrylate)-block-poly(lactide). A systematic exploration of phase space revealed that A15 forms across a substantial range of minority lactide block volume fractions (fL = 0.25 - 0.33) situated between the σ-sphere phase and hexagonally close-packed cylinders. Self-consistent field theory rationalizes the thermodynamic stability of A15 as a consequence of extreme conformational asymmetry. The experimentally observed A15-disorder phase transition is not captured using mean-field approximations but instead arises due to composition fluctuations as evidenced by fully fluctuating field-theoretic simulations. This combination of experiments and field-theoretic simulations provides rational design rules that can be used to generate unique, polymer-based mesophases through self-assembly.
RESUMEN
BackgroundPriority patients in England were offered COVID-19 vaccination by mid-April 2021. Codes in clinical record systems can denote the vaccine being declined.AimWe describe records of COVID-19 vaccines being declined, according to clinical and demographic factors.MethodsWith the approval of NHS England, we conducted a retrospective cohort study between 8 December 2020 and 25 May 2021 with primary care records for 57.9 million patients using OpenSAFELY, a secure health analytics platform. COVID-19 vaccination priority patients were those aged ≥â¯50 years or ≥â¯16 years clinically extremely vulnerable (CEV) or 'at risk'. We describe the proportion recorded as declining vaccination for each group and stratified by clinical and demographic subgroups, subsequent vaccination and distribution of clinical code usage across general practices.ResultsOf 24.5 million priority patients, 663,033 (2.7%) had a decline recorded, while 2,155,076 (8.8%) had neither a vaccine nor decline recorded. Those recorded as declining, who were subsequently vaccinated (nâ¯=â¯125,587; 18.9%) were overrepresented in the South Asian population (32.3% vs 22.8% for other ethnicities aged ≥â¯65 years). The proportion of declining unvaccinated patients was highest in CEV (3.3%), varied strongly with ethnicity (black 15.3%, South Asian 5.6%, white 1.5% for ≥ 80 years) and correlated positively with increasing deprivation.ConclusionsClinical codes indicative of COVID-19 vaccinations being declined are commonly used in England, but substantially more common among black and South Asian people, and in more deprived areas. Qualitative research is needed to determine typical reasons for recorded declines, including to what extent they reflect patients actively declining.
Asunto(s)
Vacunas contra la COVID-19 , COVID-19 , COVID-19/epidemiología , COVID-19/prevención & control , Estudios de Cohortes , Inglaterra/epidemiología , Humanos , Estudios Retrospectivos , Medicina Estatal , VacunaciónRESUMEN
We introduce a novel grafting-through polymerization strategy to synthesize dynamic bottlebrush polymers and elastomers in one step using light to construct a disulfide-containing backbone. The key starting material-α-lipoic acid (LA)-is commercially available, inexpensive, and biocompatible. When installed on the chain end(s) of poly(dimethylsiloxane) (PDMS), the cyclic disulfide unit derived from LA polymerizes under ultraviolet (UV) light in ambient conditions. Significantly, no additives such as initiator, solvent, or catalyst are required for efficient gelation. Formulations that include bis-LA-functionalized cross-linker yield bottlebrush elastomers with high gel fractions (83-98%) and tunable, supersoft shear moduli in the â¼20-200 kPa range. An added advantage of these materials is the dynamic disulfide bonds along each bottlebrush backbone, which allow for light-mediated self-healing and on-demand chemical degradation. These results highlight the potential of simple and scalable synthetic routes to generate unique bottlebrush polymers and elastomers based on PDMS.
RESUMEN
The hexagonally close-packed (HCP) sphere phase is predicted to be stable across a narrow region of linear block copolymer phase space, but the small free energy difference separating it from face-centered cubic spheres usually results in phase coexistence. Here, we report the discovery of pure HCP spheres in linear block copolymer melts with A = poly(2,2,2-trifluoroethyl acrylate) ("F") and B = poly(2-dodecyl acrylate) ("2D") or poly(4-dodecyl acrylate) ("4D"). In 4DF diblocks and F4DF triblocks, the HCP phase emerges across a substantial range of A-block volume fractions (circa fA = 0.25-0.30), and in F4DF, it forms reversibly when subjected to various processing conditions which suggests an equilibrium state. The time scale associated with forming pure HCP upon quenching from a disordered liquid is intermediate to the ordering kinetics of the Frank-Kasper σ and A15 phases. However, unlike σ and A15, HCP nucleates directly from a supercooled liquid or soft solid without proceeding through an intermediate quasicrystal. Self-consistent field theory calculations indicate the stability of HCP is intimately tied to small amounts of molar mass dispersity (D); for example, an HCP-forming F4DF sample with fA = 0.27 has an experimentally measured D = 1.04. These insights challenge the conventional wisdom that pure HCP is difficult to access in linear block copolymer melts without the use of blending or other complex processing techniques.
Asunto(s)
Resinas Acrílicas/química , Transición de Fase , Temperatura de TransiciónRESUMEN
Self-healing polymer electrolytes are reported with light-switchable conductivity based on dynamic N-donor ligand-containing diarylethene (DAE) and multivalent Ni2+ metal-ion coordination. Specifically, a polystyrene polymer grafted with poly(ethylene glycol-r-DAE)acrylate copolymer side chains was effectively cross-linked with nickel(II) bis(trifluoromethanesulfonimide) (Ni(TFSI)2) salts to form a dynamic network capable of self-healing with fast exchange kinetics under mild conditions. Furthermore, as a photoswitching compound, the DAE undergoes a reversible structural and electronic rearrangement that changes the binding strength of the DAE-Ni2+ complex under irradiation. This can be observed in the DAE-containing polymer electrolyte where irradiation with UV light triggers an increase in the resistance of solid films, which can be recovered with subsequent visible light irradiation. The increase in resistance under UV light irradiation indicates a decrease in ion mobility after photoswitching, which is consistent with the stronger binding strength of ring-closed DAE isomers with Ni2+. 1H-15N heteronuclear multiple-bond correlation nuclear magnetic resonance (HMBC NMR) spectroscopy, continuous wave electron paramagnetic resonance (cw EPR) spectroscopy, and density functional theory (DFT) calculations confirm the increase in binding strength between ring-closed DAE with metals. Rheological and in situ ion conductivity measurements show that these polymer electrolytes efficiently heal to recover their mechanical properties and ion conductivity after damage, illustrating potential applications in smart electronics.
RESUMEN
Breast implant anaplastic large cell lymphoma (ALCL) is a T-cell neoplasm arising around textured breast implants that was recognized recently as a distinct entity by the World Health Organization. Rarely, other types of lymphoma have been reported in patients with breast implants, raising the possibility of a pathogenetic relationship between breast implants and other types of lymphoma. We report eight cases of Epstein-Barr virus (EBV)-positive large B-cell lymphoma associated with breast implants. One of these cases was invasive, and the other seven neoplasms were noninvasive and showed morphologic overlap with breast implant ALCL. All eight cases expressed B-cell markers, had a non-germinal center B-cell immunophenotype, and were EBV+ with a latency type III pattern of infection. We compared the noninvasive EBV+ large B-cell lymphoma cases with a cohort of breast implant ALCL cases matched for clinical and pathologic stage. The EBV+ large B-cell lymphoma cases more frequently showed a thicker capsule, and more often were associated with calcification and prominent lymphoid aggregates outside of the capsule. The EBV+ B-cell lymphoma cells were more often arranged within necrotic fibrinoid material in a layered pattern. We believe that this case series highlights many morphologic similarities between EBV+ large B-cell lymphoma and breast implant ALCL. The data presented suggest a pathogenetic role for breast implants (as well as EBV) in the pathogenesis of EBV+ large B-cell lymphoma. We also provide some histologic findings useful for distinguishing EBV+ large B-cell lymphoma from breast implant ALCL in this clinical setting.
Asunto(s)
Implantación de Mama/efectos adversos , Implantes de Mama/efectos adversos , Infecciones por Virus de Epstein-Barr/virología , Linfoma de Células B Grandes Difuso/patología , Linfoma Anaplásico de Células Grandes/patología , Adulto , Anciano , Biomarcadores de Tumor/análisis , Implantación de Mama/instrumentación , Diagnóstico Diferencial , Infecciones por Virus de Epstein-Barr/diagnóstico , Femenino , Humanos , Linfoma de Células B Grandes Difuso/inmunología , Linfoma de Células B Grandes Difuso/virología , Linfoma Anaplásico de Células Grandes/etiología , Linfoma Anaplásico de Células Grandes/inmunología , Persona de Mediana Edad , Estadificación de Neoplasias , Valor Predictivo de las Pruebas , Diseño de Prótesis , Factores de Riesgo , Propiedades de SuperficieRESUMEN
Recent models have predicted entangled polymer solutions could shear band due to unstable flow-induced demixing. This work provides the first experimental probe of the in situ concentration profile of entangled polymer solutions under shear. At shear rates above a critical value, we show that the concentration and velocity profiles can develop bands, in quantitative agreement with steady-state model predictions. These findings highlight the critical importance of flow-concentration coupling in entangled polymer solutions.
RESUMEN
The vision sciences literature contains a large diversity of experimental and theoretical approaches to the study of visual attention. We argue that this diversity arises, at least in part, from the field's inability to unify differing theoretical perspectives. In particular, the field has been hindered by a lack of a principled formal framework for simultaneously thinking about both optimal attentional processing and capacity-limited attentional processing, where capacity is limited in a general, task-independent manner. Here, we supply such a framework based on rate-distortion theory (RDT) and optimal lossy compression. Our approach defines Bayes-optimal performance when an upper limit on information processing rate is imposed. In this article, we compare Bayesian and RDT accounts in both uncued and cued visual search tasks. We start by highlighting a typical shortcoming of unlimited-capacity Bayesian models that is not shared by RDT models, namely, that they often overestimate task performance when information-processing demands are increased. Next, we reexamine data from two cued-search experiments that have previously been modeled as the result of unlimited-capacity Bayesian inference and demonstrate that they can just as easily be explained as the result of optimal lossy compression. To model cued visual search, we introduce the concept of a "conditional communication channel." This simple extension generalizes the lossy-compression framework such that it can, in principle, predict optimal attentional-shift behavior in any kind of perceptual task, even when inputs to the model are raw sensory data such as image pixels. To demonstrate this idea's viability, we compare our idealized model of cued search, which operates on a simplified abstraction of the stimulus, to a deep neural network version that performs approximately optimal lossy compression on the real (pixel-level) experimental stimuli.
Asunto(s)
Señales (Psicología) , Percepción Visual , Teorema de Bayes , Humanos , Redes Neurales de la Computación , Análisis y Desempeño de TareasRESUMEN
OBJECTIVE: In view of changing landscape of surgical treatment for LUTS secondary to BPE, this audit was undertaken to assess key aspects of the processes and outcomes of the current interventional treatments for BPE, across different units in the UK. MATERIALS AND METHOD: A multi-institutional snapshot audit was conducted for patients undergoing interventions for LUTS/BPE over 8-week period. Using Delphi process two-part proforma was designed to capture data. RESULTS: 529 patients were included across 20 NHS trusts in England and Wales. Median age was 73 years. Indications for surgery were acute retention (47%) and LUTS (45%). 80% of patients had prior medical therapy. TURP formed the commonest procedure. 27% patients had <23 hour hospital stay. Immediate (21%) and delayed (18%) complications were Clavien-Dindo <2 category. High proportion of patients reported residual symptoms. Type and indication of surgery were significant predictor of complications, length of stay and failure of TWOC outcomes, on multivariate analyses. There were variations in departmental processes, 50% centres used PROMs. CONCLUSION: Monopolar TURP still remains the commonest intervention for BPE. Most departments are adopting newer technologies. The audit identified opportunities for development of consistent, effective and patient centric practices as well as need for large-scale focused studies.
Asunto(s)
Síntomas del Sistema Urinario Inferior/cirugía , Hiperplasia Prostática/complicaciones , Resección Transuretral de la Próstata/métodos , Anciano , Técnica Delphi , Humanos , Síntomas del Sistema Urinario Inferior/etiología , Masculino , Auditoría Médica , Resultado del Tratamiento , Reino UnidoRESUMEN
We introduce a design strategy to expand the range of accessible mechanical properties in covalent adaptable networks (CANs) using bottlebrush polymer building blocks. Well-defined bottlebrush polymers with rubbery poly(4-methylcaprolactone) side chains were cross-linked in formulations that include a bislactone and strong Lewis acid (tin ethylhexanoate). The resulting materials exhibit tunable stress-relaxation rates at elevated temperatures (160-180 °C) due to dynamic ester cross-links that undergo transesterification with residual hydroxy groups. Varying the cross-linker loading or bottlebrush backbone degree of polymerization yields predictable low-frequency shear moduli ca. 10-100 kPa, well below values typical of linear polymer CANs (1 MPa). These extensible networks can be stretched to strains as large as 350% before failure and undergo efficient self-healing to recover >85% of their original toughness upon repeated fracture and melt processing. In summary, molecular architecture creates new opportunities to tailor the mechanical properties of CANs in ways that are otherwise difficult to achieve.
RESUMEN
A versatile and scalable strategy is reported for the rapid generation of block copolymer libraries spanning a wide range of compositions starting from a single parent copolymer. This strategy employs automated and operationally simple chromatographic separation that is demonstrated to be applicable to a variety of block copolymer chemistries on multigram scales with excellent mass recovery. The corresponding phase diagrams exhibit increased compositional resolution compared to those traditionally constructed via multiple, individual block copolymer syntheses. Increased uniformity and lower dispersity of the chromatographic libraries lead to differences in the location of order-order transitions and observable morphologies, highlighting the influence of dispersity on the self-assembly of block copolymers. Significantly, this separation technique greatly simplifies the exploration of block copolymer phase space across a range of compositions, monomer pairs, and molecular weights (up to 50000 amu), producing materials with increased control and homogeneity when compared to conventional strategies.
Asunto(s)
Automatización , Polímeros/aislamiento & purificación , Estructura Molecular , Peso Molecular , Polímeros/químicaRESUMEN
Humans can easily describe, imagine, and, crucially, predict a wide variety of behaviors of liquids-splashing, squirting, gushing, sloshing, soaking, dripping, draining, trickling, pooling, and pouring-despite tremendous variability in their material and dynamical properties. Here we propose and test a computational model of how people perceive and predict these liquid dynamics, based on coarse approximate simulations of fluids as collections of interacting particles. Our model is analogous to a "game engine in the head", drawing on techniques for interactive simulations (as in video games) that optimize for efficiency and natural appearance rather than physical accuracy. In two behavioral experiments, we found that the model accurately captured people's predictions about how liquids flow among complex solid obstacles, and was significantly better than several alternatives based on simple heuristics and deep neural networks. Our model was also able to explain how people's predictions varied as a function of the liquids' properties (e.g., viscosity and stickiness). Together, the model and empirical results extend the recent proposal that human physical scene understanding for the dynamics of rigid, solid objects can be supported by approximate probabilistic simulation, to the more complex and unexplored domain of fluid dynamics.
Asunto(s)
Hidrodinámica , Intuición , Biología Computacional , Simulación por Computador , Heurística , Humanos , Juicio , Modelos Psicológicos , Modelos Estadísticos , Redes Neurales de la Computación , Fenómenos FísicosRESUMEN
Block polymer self-assembly typically translates molecular chain connectivity into mesoscale structure by exploiting incompatible blocks with large interaction parameters (χij). In this article, we demonstrate that the converse approach, encoding low-χ interactions in ABC bottlebrush triblock terpolymers (χAC [Formula: see text] 0), promotes organization into a unique mixed-domain lamellar morphology, which we designate LAMP Transmission electron microscopy indicates that LAMP exhibits ACBC domain connectivity, in contrast to conventional three-domain lamellae (LAM3) with ABCB periods. Complementary small-angle X-ray scattering experiments reveal a strongly decreasing domain spacing with increasing total molar mass. Self-consistent field theory reinforces these observations and predicts that LAMP is thermodynamically stable below a critical χAC, above which LAM3 emerges. Both experiments and theory expose close analogies to ABA' triblock copolymer phase behavior, collectively suggesting that low-χ interactions between chemically similar or distinct blocks intimately influence self-assembly. These conclusions provide fresh opportunities for block polymer design with potential consequences spanning all self-assembling soft materials.
RESUMEN
The "resource-rational" approach is ambitious and worthwhile. A shortcoming of the proposed approach is that it fails to constrain what counts as a constraint. As a result, constraints used in different cognitive domains often have nothing in common. We describe an alternative framework that satisfies many of the desiderata of the resource-rational approach, but in a more disciplined manner.