RESUMEN
We demonstrate a compact, fiber-pigtailed, 4-by-4 wavelength router in Silicon-on-insulator photonic wires, fabricated using CMOS processing methods. The core is an AWG with a 250GHz channel spacing and 1THz free spectral range, on a 425x155 microm(2) footprint. The insertion loss of the AWG was reduced to 3.5dB by applying a two-step processing technique. The crosstalk is -12dB. The device was pigtailed using vertical fiber couplers and an eight-fiber array connector.
RESUMEN
For the compact integration of photonic circuits, wavelength-scale structures with a high index contrast are a key requirement. We developed a fabrication process for these nanophotonic structures in Silicon-on-insulator using CMOS processing techniques based on deep UV lithography. We have fabricated both photonic wires and photonic crystal waveguides and show that, with the same fabrication technique, photonic wires have much less propagation loss than photonic crystal waveguides. Measurements show losses of 0.24dB/mm for photonic wires, and 7.5dB/mm for photonic crystal waveguides. To tackle the coupling to fiber, we studied and fabricated vertical fiber couplers with coupling efficiencies of over 21%. In addition, we demonstrate integrated compact spot-size converters with a mode-to-mode coupling efficiency of over 70%.
RESUMEN
A photonic crystal waveguide splitter that exhibits ultralow-loss 3-dB splitting for TE-polarized light is fabricated in silicon-on-insulator material by use of deep UV lithography. The high performance is achieved by use of a Y junction, which is designed to ensure single-mode operation, and low-loss 60 degrees bends. Zero-loss 3-dB output is experimentally obtained in the range 1560-1585 nm. Results from three-dimensional finite-difference time-domain modeling with no adjustable parameters are found to be in excellent agreement with the experimental results.