RESUMEN
Designing heterostructures of soft ionic nanocrystals with metallic or covalent nanostructures having epitaxial junctions in solution poses several fundamental challenges. Hence, in spite of large successes in developing lead halide perovskite nanocrystals, the chemistry of formation of their facet-directive epitaxial growth of noble metals cannot be explored yet. To address this, herein, epitaxial heterostructures of orthorhombic CsPbBr3 and cubic Pt in multiple directional approaches are reported. Appropriate facets of perovskite nanocrystals and high-temperature reaction are the key parameters for obtaining such nanocrystal heterostructures. Interfacial planes at the junctions having ideal lattice matching helped in establishing the epitaxial relations of (110) of orthorhombic (space group Pbnm) CsPbBr3 with {020} of cubic Pt and again (011) of CsPbBr3 with {111} of Pt. These results provided strong fundamental insights that ionic halide perovskite nanostructures and materials having different crystal phases can be placed in a single building block with continuous sublattice structures.
RESUMEN
Bright lead halide perovskite nanocrystals, which have been extensively studied in the past 5 years, are mostly confined to a six faceted hexahedron (cube/platelet) shape. With variations of ligand, precursor, reaction temperature, and surface modification, their brightness has been enhanced and phase became stable, but ultimate nanocrystals still retained the hexahedron cube or platelet shape in most of the hot injection reactions. In contrast, by exploration of α-halo ketone in amine as a halide precursor, different shaped nanocrystals without compromising the photoluminescence quantum yield (PLQY) are reported. Confining to orthorhombic CsPbBr3, the obtained nanocrystals are stabilized by 12 facets ({200}, {020}, {112}) and led to 12 faceted rhombic dodecahedrons. These facets are absolutely different from six ({110}, {002}) equivalent facets of widely reported orthorhombic cube shaped CsPbBr3 nanocrystals. These also retained the colloidal and phase stability, as well as showed near unity PLQY. With further annealing, these are transformed to 26 faceted rhombicuboctahedrons by dissolving all their vertices. Importantly, these 12 faceted nanocrystals showed wide area self-assembly in most of the reactions. It has also been concluded that primary ammonium ions led to six faceted nanocrystals, but tertiary ammonium ions obtained in this case stabilized different group of facets. While perovskite nanocrystals were broadly confined to only nanocubes, these new nanocrystals with intense emission would certainly provide a new avenue for continuing their further research.
RESUMEN
In a generic synthesis approach, all three CsPbX3 (X=Cl, Br and I) perovskite nanocrystals having near unity quantum yields is reported. This has been achieved by injecting the desired amount of preformed alkylammonium halide salts which acted as a dual source providing halide ions and the capping agent to an equimolar amount of non-halide Pb and Cs precursors in a reaction flask at an optimized reaction temperature. The composition sensitivity of Pb to Cs ratio, high temperature reaction, and injection of ammonium halide remained the key parameters for obtaining the high quantum yields. Details of the reaction process, use of different reagents and setting up the reaction parameters are reported.
RESUMEN
There is an ever-evolving need of customized, anatomic-specific grafting materials for bone regeneration. More specifically, biocompatible and osteoconductive materials, that may be configured dynamically to fit and fill defects, through the application of an external stimulus. The objective of this study was to establish a basis for the development of direct inkjet writing (DIW)-based shape memory polymer-ceramic composites for bone tissue regeneration applications and to establish material behavior under thermomechanical loading. Polymer-ceramic (polylactic acid [PLA]/ß-tricalcium phosphate [ß-TCP]) colloidal gels were prepared of different w/w ratios (90/10, 80/20, 70/30, 60/40, and 50/50) through polymer dissolution in acetone (15% w/v). Cytocompatibility was analyzed through Presto Blue assays. Rheological properties of the colloidal gels were measured to determine shear-thinning capabilities. Gels were then extruded through a custom-built DIW printer. Space filling constructs of the gels were printed and subjected to thermomechanical characterization to measure shape fixity (Rf) and shape recovery (Rr) ratios through five successive shape memory cycles. The polymer-ceramic composite gels exhibited shear-thinning capabilities for extrusion through a nozzle for DIW. A significant increase in cellular viability was observed with the addition of ß-TCP particles within the polymer matrix relative to pure PLA. Shape memory effect in the printed constructs was repeatable up to 4 cycles followed by permanent deformation. While further research on scaffold macro-/micro-geometries, and engineered porosities are warranted, this proof-of-concept study suggested suitability of this polymer-ceramic material and the DIW 3D printing workflow for the production of customized, patient specific constructs for bone tissue engineering.
Asunto(s)
Fosfatos de Calcio , Poliésteres , Ingeniería de Tejidos , Humanos , Poliésteres/farmacología , Polímeros , Regeneración Ósea , Geles , Andamios del Tejido , Impresión TridimensionalRESUMEN
The cube shape of orthorhombic phase CsPbBr3 nanocrystals possesses the ability of selective facet packing that leads to 1D, 2D, and 3D nanostructures. In solution, their transformation with linear one-dimensional packing to nanorods/nanowires is extensively studied. Here, multifacet coupling in two directions of the truncated cube nanocrystals to rod couples and then to single-crystalline rectangular rods is reported. With extensive high-resolution transmission electron microscopy image analysis, length and width directions of these nanorods are derived. For the seed cube structures, finding {110} and {002} facets has remained difficult as these possess the hexahedron symmetry and their size remains smaller; however, for nanorods, these planes and the ⟨110⟩ and ⟨001⟩ directions are clearly identified. From nanocrystal to nanorod formation, the alignment directions are observed as random (as shown in the abstract graphic), and this could vary from one to the other rods obtained in the same batch of samples. Moreover, seed nanocrystal connections are derived here as not random and are rather induced by addition of the calculated amount of additional Pb(II). The same has also been extended to nanocubes obtained from different literature methods. It is predicted that a Pb-bromide buffer octahedra layer was created to connect two cubes, and this can connect along one, two, or even more facets of cubes simultaneously to connect other cubes and form different nanostructures. Hence, these results here provide some basic fundamentals of seed cube connections, the driving force to connect those, trapping the intermediate to visualize their alignments for attachments, and identifying and establishing the orthorhombic ⟨110⟩ and ⟨001⟩ directions of the length and width of CsPbBr3 nanostructures.
RESUMEN
The increase of the stability of perovskite nanocrystals with respect to exposure to polar media, layers growth, or shelling with different materials is in demand. While these are widely studied for metal chalcogenide nanocrystals, it has yet to be explored for perovskite nanocrystals. Even growth of a single monolayer on any facet or on the entire surface of these nanocrystals could not be established yet. To address this, herein, a secondary growth approach leading to creation of a secondary lattice with subsequent expansion on preformed CsPbBr3 perovskite nanocrystals is reported. As direct layer growth by adding precursors was not successful, Cs-lattice extension to preformed CsPbBr3 nanocrystals was performed by coupling CsBr to these nanocrystals. Opening both {110}/{002} and {200} facets of parent CsPbBr3 nanocrystals, CsBr was observed to be connected with lattice matching to the {200} facets. Further with Pb(II) incorporation, the Cs-sublattices of CsBr were expanded to CsPbBr3 and led to cube-couple nanocrystals. However, as cubes in these nanostructures were differently oriented, these showed lattice mismatch at their junctions. This lattice mismatch though restricted complete shelling but successfully favored the secondary growth on specific facets of parent CsPbBr3 nanocrystals. Details of this secondary growth via lattice extension and expansion are microscopically analyzed and reported. These results further suggest that lead halide perovskite nanocrystals can be epitaxially grown under proper reaction design and more complex as well as heterostructures of these materials can be fabricated to meet the current demands.
RESUMEN
Physical insights related to ion equilibrium involved in the synthesis of lead halide perovskite nanocrystals remain key parameters for regulating the phase stability and luminescence intensity of these emerging materials. These have been extensively studied since the development of these nanocrystals, and different reaction processes controlling the formation of CsPbX3 nanocrystals are largely understood. However, growth kinetics related to the formation of these nanocrystals have not been established yet. Hence, more fundamental understanding of the formation processes of these nanocrystals is urgently required. Keeping these in mind and emphasizing the most widely studied nanocrystals of CsPbBr3, different equilibrium processes involved in their synthesis for phase and composition variations are summarized and discussed in this Perspective. In addition, implementations of these findings for shape modulations by growth are discussed, and several new directions of research for understanding more fundamental insights are also presented.
RESUMEN
Pretreatment using metal chlorides during the formation of halide deficient free perovskite nanocrystals is reported. Among several metal chlorides, Cu(II)Cl2 was observed to be ideal for the synthesis of highly emitting CsPbCl3 nanocrystals at high reaction temperature. Because high temperature remained more favorable for the dopant insertion, doping of Mn(II) was carried out under this halide-rich system, and nearly 68% photoluminescence quantum yield was recorded. Analysis could not provide strong evidence of insertion of Cu(II) inside the nanocrystals; rather, it was established that Cu(II)Cl2 in the system helped to stabilize the reaction even at and above 260 °C and provided an adequate chloride source for obtaining the highly emitting host as well as doped nanocrystals. Details of the physical process involved for this metal ion-induced uplifting of the reaction temperature and the consequent impacts on the nanocrystal formation are studied in detail and reported in this Letter.
RESUMEN
Doping Mn(II) in inorganic Ruddlesden-Popper phase Cs2PbCl2I2 perovskite nanoplatelets is reported. The host nanostructures were prepared with a calculative protocol taking the exact required composition of Cs(I) and Pb(II) and injecting the preformed mixed oleylammonium chlorides and iodides at optimized reaction temperature. Reactions were optimized with various halides and their mixtures, but the stable phase of the Cs2PbX4 system was obtained only for the chloride-iodide mixed-halide system. Introduction of Mn(II) along with Pb(II), resulted in successful light-emitting doped nanocrystals. Measuring the photoluminescence and the decay lifetimes at room and liquid nitrogen temperatures, the variations in the excitonic, self-trapped, and Mn dopant emission properties were compared with those of the chalcogenide and perovskite nanocrystals.
RESUMEN
Red emitting α-CsPbI3 nanocrystals are highly phase sensitive to ambient exposure, and B-site doping with suitable cations is adopted as one of the most feasible approaches for their phase stability. There are several reports herein: Ni(II) ions having the smallest transition metal Shannon radii were explored for doping in these nanocrystals. This successfully stabilized the cubic phase and retained the intense emission of nanocrystals for nearly 2 months. Being the smallest ion, the halide octahedra in the perovskite lattice were expected to provide high restraint ability toward δ-CsPbI3. Comparing with postsynthesis iodide treatments, the importance of doping in high temperature reaction was discussed. Finally, these doped nanocrystals were explored for photovoltaic devices and showed comparable efficiency (9.1%) to different other similar doped nanocrystals. Hence, the finding reported here is a step forward for understanding the insights of phase stability of α-CsPbI3 perovskite nanocrystals.
RESUMEN
High-energy-emitting CsPbCl3 nanocrystals have shown significant loss and enhancement of their emission intensity (â¼40-50 folds) during purification and surface treatments, respectively. This confirms that the surfaces of these nanocrystals are very sensitive. In this Letter, physical insights of the interface bindings on the surface of these blue-emitting CsPbCl3 nanocrystals with different passivating agents and their consequential impact on purification are investigated. Using various metal chlorides irrespective of the charge and size of the metal ions, metal acetates, and nonmetal chloride, the predominant influence of chloride ions in helping retrieve/intensify the blue emission is established. The purification processes are observed to be very delicate, and successive purifications with introduction of polar nonsolvents led to the transformation of an emitting cubic CsPbCl3 phase to nonemitting tetragonal CsPb2Cl5 phase nanocrystals irreversibly. The impact of various salt additions only temporarily helped in enhancing the emission, but the phase change remained inevitable upon successive purification. However, as a remedy, by in situ use of alkylammonium chloride salt in high-temperature reactions, the surface binding was improved, and significant emission as well as the phase could be retained with successive purifications.
RESUMEN
Annealing perovskite nanocrystals at high reaction temperature changes their crystal phase, shape, and optical properties. Carrying out reactions between 180 and 250 °C, the impact of thermal annealing for CsPbCl3 and CsPbBr3 nanocrystals in a reaction flask was investigated here. At higher temperature, a phase change was observed instantly, which could not be trapped even with ice-bath cooling. Interestingly, using a calculated amount of preformed alkylammonium halides as dual passivating agents, the nanocrystals of both CsPbCl3 and CsPbBr3 could even be stabilized for hours of annealing at 250 °C. CsPbCl3, which was reported to be a poor emissive nanocrystal in comparison to CsPbBr3, could sustain even more than 5 h of annealing at 250 °C and recorded â¼51% absolutely quantum yield. Details of the interface chemistry and the role of the used dual passivating agent for providing thermal stability are studied and reported in this Letter.