Effect of root surface conditioning on gingival recession coverage with a connective tissue graft. A retrospective comparative study of three different agents.

OBJECTIVE: Different root modifiers have been proposed in the literature with an attempt to improve the healing process and the success rate of root coverage procedures. The aim of the present retrospective study was to evaluate the effect of three different types of root surface conditioning, namely, tetracycline (TTC), ethylene-di-amino-tetra-acetic acid (EDTA) and saline, on the outcome of root coverage procedures applying the same surgical technique. MATERIALS AND METHODS: Twenty-nine patients with 60 Classes I, II, or III recession defects were treated using connective tissue with a partial-thickness double-pedicle graft. In 21 recession defects root surface was treated with TTC and, in other 21, with EDTA, while in the remaining, saline solution was applied. Statistical analysis consisted of descriptive statistics and Kruskal-Wallis, Mann-Whitney, and chi-square tests. RESULTS: Differences between pre- and postoperative values were statistically significant only within but not between groups. Mean root coverage was 73.25%, 69.19%, and 82.17% in the TTC, the EDTA, and the saline groups, respectively. The study revealed no statistically significant differences for all evaluated parameters between groups. CONCLUSION: Within the limits of this study, root conditioning, prior to root coverage procedures, does not significantly affect their outcome. CLINICAL SIGNIFICANCE: Clinical outcome of root coverage procedures is not related to the type of root surface conditioning.

Evaluation of a topical herbal patch for soft tissue wound healing: an animal study.

AIM: This study evaluated the effects of a topical herbal patch (PerioPatch®) for gingival wound healing in a rat model. MATERIALS AND METHODS: A mid-crestal incision was performed on each side of the edentulous anterior maxilla in 48, 6-month-old, Wistar rats. Full-thickness flaps were raised, repositioned and sutured. Four experimental groups were established: herbal patch, placebo patch, no patch and no patch and no surgery. Patches were placed immediately after surgery and replaced every 12 h for the following 3 days. Half of the animals were killed after 5 and the remaining ones after 12 days. Tissue blocks were retrieved and processed for histological and immunohistochemical evaluation. Epithelial gap, collagen contents, amount of macrophages, cellular proliferation and vascular contents were evaluated in the central incision area. Statistical analysis consisted of two-way anova. RESULTS: The herbal patch group presented the smallest epithelial gap at 12 days, the highest collagen content both at 5 and 12 days, a larger number of proliferating cells at day 5 and more numerous blood vessels at day 12. Macrophage number was similar in all groups. CONCLUSION: Herbal patch improved wound healing in this animal model.

Freehand versus computer-guided implant placement: early implant failures in a case-control study.

OBJECTIVE: To evaluate the survival of fully guided implants placed with a hollow tooth-supported computerized surgical guide (TSSG). METHOD AND MATERIALS: This retrospective study included 94 patients who underwent implant placement using freehand or TSSG by the same operator between 2015 and 2020. Early implant failures occurring within 1-year post-rehabilitation were assessed. RESULTS: In the study, two types of implants were placed using two different techniques: TSSG and freehand. The TSSG group consisted of 84 S implants and 100 LP implants, and the freehand group included 90 S implants and 94 LP implants. The results showed that more implants survived when placed freehand compared to TSSG (181 [98.4%] vs 172 [93.5%], respectively, P .05). The only significant factor affecting the success rate was the type of implant, with LP implants having a higher survival rate in the TSSG group (P .05). CONCLUSION: Surgeons should consider the impact of implant type on survival rates when utilizing the TSSG system.

A novel micro-CT analysis for evaluating the regenerative potential of bone augmentation xenografts in rabbit calvarias.

Guided Bone Regeneration is a common procedure, yet, as new grafting materials are being introduced into the market, a reliable evaluation method is required. Critical size defect in animal models provides an accurate simulation, followed by histological sections to evaluate the new bone formation. However, histology is destructive, two-dimensional and technique-sensitive. In this study we developed a novel volumetric Micro-CT analysis to quantify new bone formation characteristics. Eight adult female New Zealand white rabbits were subjected to calvarial critical-size defects. Four 8 mm in diameter circular defects were preformed in each animal, to allow random allocation of four treatment modalities. All calvarias were scanned using Micro-CT. Each defect was segmented into four equal parts: pristine bone, outer, middle, and inner. Amira software (v. 6.3, www.fei.com ) was used to calculate the new bone volume in each region and compare it to that of the pristine bone. All grafting materials demonstrated that new bone formation decreased as it moved inward. Only the inner region differed across grafting materials (p = 0.001). The new Micro-CT analysis allowed us to divide each defect into 3D regions providing better understanding of the bone formation process. Amongst the various advantages of the Micro-CT, it enables us to quantify the graft materials and the newly formed bone independently, and to describe the defect morphology in 3D (bi- vs. uni-cortical defects). Providing an insight into the inner region of the defect can better predict the regenerative potential of the bone augmentation graft material. Therefore, the suggested Micro-CT analysis is beneficial for further developing of clinical approaches.

New Bone Growth into Surgical Bone Defects Grafted with a Novel Cultivated Coral Graft: A Histomorphometric Study in Rabbit Calvarias.

PURPOSE: To evaluate a new cultivated coral graft (CCG) in an in vivo experimental guided bone regeneration (GBR) procedure. MATERIALS AND METHODS: The calvarias of eight rabbits were surgically exposed, and circular defects 8 mm in diameter were prepared. One defect was filled with CCG particles (experimental group); the contralateral defect (control group) was spontaneously filled by blood clot. All defects were covered with a collagen membrane. Subjects were euthanized after 8 weeks. RESULTS: Histologic observations of the defects showed similar bone growth patterns in both experimental and control osteotomies. In the experimental defects, no traces of coral particles were observed. Histometric analysis showed denser bone in the pristine zone (65%-66%) than in the peripheral zone for both the control (50%) and experimental defects (31%) (P = not significant). The new bone percentage was reduced from the peripheral zone toward the middle and the center of the defect (31%, 32%, and 27%, respectively) as the distance from the peripheral pristine bone borders increased. CONCLUSIONS: The existing data supports the complete degradation of CCG as a spacemaintaining scaffold for GBR procedures.

New Bone Growth into Surgical Bone Defects Grafted with a Novel Cultivated Coral Graft: A Histomorphometric Study in Rabbit Calvarias.

Natural Coral Particles (NCPs) are a suitable scaffold material for Guided Bone Regeneration (GBR) procedures; it combines the placement of a bone substitute supporting a barrier membrane. Due to increasing sea pollution and the declarations of endangered coral species (KYOTO 1997), they are no longer suitable for the medical industry. Novel domestic corals have been grown under controlled conditions to produce cultivated coral graft (CCG) material. This study aimed to evaluate a new CCG in an in vivo experimental GBR procedure. The calvarias of 8 rabbits were surgically exposed, and circular defects 8 mm in diameter were prepared. One defect was filled with CCG particles (experimental group); the contralateral defect (control group) was spontaneously filled by blood clot. The defects were covered with a collagen membrane. Animals were euthanized after 8 weeks. Histological observations of the defects showed similar bone growth patterns in both experimental and control osteotomies. In the experimental defects, no traces of coral particles were observed. Histometric analysis showed denser bone in the pristine zone (65-66%) than in the peripheral zone for both the control (50%) and experimental defects (31%) (P= NS). The new bone percentage was reduced from the peripheral zone toward the middle and the center of the defect (31%, 32% and 27%, respectively) as the distance from the peripheral pristine bone borders increased. The existing data support the complete degradation of CCG as space-maintaining scaffold for GBR procedures.

Outcomes and Complications of 33 Soft-Milled Cobalt-Chromium-Ceramic Full-Arch Screw-Retained Implant-Supported Prostheses: A Retrospective Study with up to 10-Year Follow-Up.

This retrospective study assessed outcomes and complications related to implants and prostheses in edentulous patients treated with soft-milled cobalt-chromium-ceramic full-arch screw-retained implant-supported prostheses (SCCSIPs). After the final prosthesis was delivered, patients participated in an annual dental check-up program, including clinical and radiographic assessments. Outcomes of implants and prostheses were evaluated, and biological and technical complications were categorized as major or minor. Implant and prosthesis cumulative survival rates were assessed using the life table analysis. A total of twenty-five participants (mean age 63.6 ± 7.3 years) with 33 SCCSIPs were observed for a mean of 68.9 ± 27.9 months (range 1-10 years). A total of 7 out of 245 implants were lost, with no effect on prosthesis survival, leading to cumulative survival rates of 97.1% for implants and 100% for prostheses. The most recurrent minor and major biological complications were soft tissue recession (9%) and late implant failure (2.8%). Among 25 technical complications, porcelain fracture was the only major technical complication, requiring prosthesis removal (1%). Porcelain chipping was the most frequent minor technical complication, affecting 21 crowns (5.4%), which required polishing only. At the end of the follow-up, 69.7% of the prostheses were free of technical complications. Within the limitations of this study, SCCSIP showed promising clinical performance after 1-10 years.

Presence of Periopathogens in Sinus Floor Augmentation Sites: A Cohort Study.

PURPOSE: To investigate the effects of periopathogens on bone grafts for maxillary sinus floor augmentation and implant survival. MATERIALS AND METHODS: A cohort study was designed. Samples from maxillary sinus floor augmentation sites and from periodontal pockets in adjacent teeth of the same patients were collected during the surgery and following periodontal maintenance and plaque removal. Polymerase chain reaction (PCR) was performed by an external lab service for analysis of the following periopathogens: Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Prevotella intermedia, Tannerella forsythia, and Treponema denticola. Correlations between the presence of periopathogens in sinus sites and periodontal pockets in adjacent teeth and the clinical findings (bone and implant survival) were studied. RESULTS: A total of 23 patients were suitable for study inclusion. Periopathogens were found in sinus sites in 6 patients (26%) and in tooth sites in 15 patients (65%). There was low correlation for the presence of periopathogens between tooth sites and sinus sites and for complications. CONCLUSION: The presence of periopathogens as revealed by PCR was lower in sinus sites compared with tooth sites. Their presence neither caused bone pathology nor affected dental implant survival. The presence of periopathogens in sinus sites is inevitable even under periodontal maintenance. Although its presence did not endanger implant survival, future studies are recommended for studying this issue. Further analyses of the presence of periopathogens in cases of bone resorption at the apex of dental implants inserted into sites of augmented sinuses are warranted.

Primary Implant Stability Analysis of Different Dental Implant Connections and Designs-An In Vitro Comparative Study.

Primary implant stability can be evaluated at the time of placement by measuring the insertion torque (IT). However, another method to monitor implant stability over time is resonance frequency analysis (RFA). Our aim was to examine the effect of bone type, implant design, and implant length on implant primary stability as measured by IT and two RFA devices (Osstell and Penguin) in an in vitro model. Ninety-six implants were inserted by a surgical motor in an artificial bone material, resembling soft and dense bone. Two different implant designs-conical connection (CC) and internal hex (IH), with lengths of 13 and 8 mm, were compared. The results indicate that the primary stability as measured by RFA and IT is significantly increased by the quality of bone (dense bone), and implant length and design, where the influence of dense bone is similar to that of CC design. Both the Osstell and Penguin devices recorded higher primary implant stability for long implants in dense bone, favoring the CC over the IH implant design. The CC implant design may compensate for the low stability expected in soft bone, and dense bone may compensate for short implant length if required by the anatomical bone conditions.

Histologic and Histomorphometric Evaluation of a Connective Tissue Graft Retrieved with a Novel Deepithelialization Procedure: A Case Series.

Various free connective tissue graft (CTG) harvesting techniques have been reported. The lining epithelium of the palatal graft may be retrieved either intra- or extraorally. This report presents a series of root coverage cases where deepithelialization was intraorally performed before harvesting the graft with a round diamond bur mounted on a low-speed handpiece. Ten single-tooth gingival recession defects in five patients were treated, applying a surgical procedure based on a coronally advanced flap combined with a free CTG that was deepithelialized in situ by the same method. Recession and probing depths and keratinized tissue and recession widths were recorded at baseline and the follow-up evaluations. Follow-up was between 7 and 21 months (mean: 12.1 ± 5.04 months). Clinical, esthetic, and histologic evaluations were performed. Mean root coverage was 89% ± 24.86% (range: 25% to 100%), and complete root coverage was observed in 80% of cases; the esthetic score range was 6 to 9 (mean: 7.44 ± 1.01). Epithelial remnants, although different in proportions, were evident in all samples (range of prevalence: 4.57% to 29.12%). Within the limitations of the small number of clinical cases, the presented in situ deepithelialization technique for CTG seems to be valuable and may accordingly be routinely applied.

Immediate Maxillary Full-Arch Rehabilitation of Periodontal Patients with Terminal Dentition Using Tilted Implants and Bone Augmentation: A 5-Year Retrospective Cohort Study.

BACKGROUND: All-on-four protocols with tilted implants in the maxilla are used to rehabilitate the terminal dentition of the severe generalized periodontitis patients. Data on long-term biological complications are scarce. METHODS: Eighty-four axial and forty-six tilted immediate implants have been placed in the extraction sockets of 23 patients according to a four-six implants protocol combined with ridge augmentation. Within 72 h, a provisional prosthesis was cemented to the implants; after 6 months, a cemented ceramic-metallic prosthesis was delivered. The patients were followed for up to 5 years. RESULTS: The 5-year survival rate of the straight and tilted implants was 100% and 97.8, and the prosthetic one was 100%. Marginal bone loss (MBL) of the straight implants was 0.42 ± 0.67 and 0.59 ±1.01 mm on the mesial and distal sides; for the tilted, it was 0.37 ± 0.68 and 0.34 ±0.62 mm, and the differences were not statistically significant. Implant position, smoking, keratinized mucosal width, and cantilever did not affect MBL. Peri-implant mucositis involved 29.4% and 22.2% of the straight and tilted implants, respectively; peri-implantitis involved 5.8% and 4.4% of the straight and tilted implants, respectively, without statistical significance. CONCLUSIONS: This immediate loading protocol's 5-year survival and success rates were high. No difference between the straight and tilted implants was found regarding survival, success rates, and MBL.

Evaluation of Implant Stability and Trephination Depth for Implant Removal-An In Vitro Study.

Malpositioned and broken implants are usually fully osseointegrated; hence, their removal, especially from the lower arch, can be very challenging. Implant removal techniques include reverse torque and trephination. Trephination is an invasive technique that can jeopardize vital structures, cause mandibular fatigue fractures, or lead to osteomyelitis. In this study, we aimed to assess the relationship between trephination depth and implant stability by recording implant stability quotient (ISQ) readings at varying trephination depths in vitro. Materials and methods: Forty-eight implants were inserted into dense synthetic polyurethane foam blocks as artificial bone. Primary implant stability was measured with a Penguin resonance frequency analysis (RFA) device. Implants of two designs with a diameter of 3.75 mm and a length of 13 or 8 mm were inserted. Twenty-four internal hexagon (IH) (Seven®) and twenty-four conical connection (CC) implants (C1®; MIS® Implants, Ltd., Misgav, Israel) were used. The primary implant stability was measured with the RFA device. Trephination was performed, and implant stability was recorded at depths of 0, 3, and 6 mm for the 8 mm implants and 0, 3, 6, 8, 10, and 11.5 mm for the 13 mm implants. Results: Linear regression revealed a significant relation between the trephination depth and the ISQ (F (1, 213) = 1113.192, p < 0.001, adjusted r2 = 0.839). The trephination depth significantly predicted the ISQ (ß = −5.337, p < 0.001), and the ISQ decreased by −5.33 as the trephination depth increased by 1 mm. Conclusion: Implant stability reduction as measured using an RFA device during trephination may be a valuable guide to achieving safe reverse torque for implant removal. Further studies are needed to evaluate these data in clinical settings.

Bacterial Growth on Three Non-Resorbable Polytetrafluoroethylene (PTFE) Membranes-An In Vitro Study.

GBR (Guided Bone Regeneration) procedure is challenged by the risk of membrane exposure to the oral cavity and contamination. The barrier quality of these membranes serve as a mechanical block from bacterial penetration into the GBR site. The purpose of this in vitro study was to evaluate the antibacterial effect of three commercial non-resorbable polytetrafluoroethylene membranes. (Two d-PTFE membranes and one double layer e-PTFE +d-PTFE membrane). A validated in vitro model with two bacterial species (Streptococcus sanguinis and Fusobacterium nucleatum) was used. Eight samples from membrane each were placed in a 96-well microtiter plate. The experimental and positive control groups were exposed to a bacterial suspension which involved one bacterial species in each plate. Bacterial growth was monitored spectrophotometrically at 650 nm for 24 h in temperature controlled microplate spectrophotometer under anaerobic conditions. One- Sample Kolmogorov−Smirnov Normal test and the Kruskal−Wallis test was used for the statistical analysis. As shown by the bacterial growth curves obtained from the spectrophotometer readings, all three membranes resulted in bacterial growth. We have not found a statistical difference in F. nucleatum growth between different membrane samples and the positive control group. However, S. sanguinis growth was reduced significantly in the presence of two membranes (CYTOPLAST TXT-200 and NeoGenTM) when compared to the control (p < 0.01). The presence of Permamem® had no significant influence on S. sanguinis growth. Some types of commercial non-resorbable PTFE membranes may have an impact on the growth dynamics of specific bacterial species.

Retrospective 1- to 8-Year Follow-Up Study of Complete Oral Rehabilitation Using Monolithic Zirconia Restorations with Increased Vertical Dimension of Occlusion in Patients with Bruxism.

AIM: The aim of this paper is to perform a retrospective assessment of the clinical performance of the complete oral rehabilitation of patients with bruxism treated with implants and teeth-supported veneered and non-veneered monolithic zirconia restorations with increased occlusal vertical dimension. METHODS: In this retrospective follow-up study, 16 bruxer patients, mean age 59.5 ± 14.9 years, were treated with 152 veneered and 229 non-veneered monolithic zirconia and followed for a mean of 58.8 ± 18.8 months (range 1-8 years). The patients were examined clinically and radiographically, annually. Clinical data were extracted from the medical records. In the recall appointments, modified California Dental Association (CDA) criteria were used to evaluate the restorations. Implant and restoration survival and success rates were recorded and analyzed. RESULTS: The cumulative survival rates of implants and restorations were 97.7% and 97.6%, respectively. Nine restorations were replaced: three due to horizontal tooth fractures, two because of implant failure and four had secondary caries. A total of 43 biologic and technical complications were recorded. In the veneered group, the predominant complication was minor veneer chipping (16.4%), which required polishing only (grade 1). In the non-veneered group, the main complication was open proximal contacts between the implant restorations and adjacent teeth (14.5%). CONCLUSIONS: The survival rates of restorations and implants in patients with bruxism are excellent, even though veneered zirconia restoration exhibited a high rate of minor veneer chipping, which required polishing only. The biologic complication of fractured single-tooth abutment may occur.

The Accuracy of Open-Tray vs. Snap on Impression Techniques in A 6-Implant Model: An In Vitro 3D Study.

To compare the three-dimensional accuracy of an open-tray and two snap on impression techniques (with and without connecting the plastic caps of the snap on impression transfers) in a full arch 6-implant model, a reference acrylic resin model of the maxilla with six implants was fabricated. Prominent geometrical triangles, in the palate area, served as reference points for a digital overlap between scans. Three impression transfer techniques were evaluated and compared: open-tray direct impression (DI), snap on impression (SpO), and connected snap on impression (SpOC). Polyether impression material was used to make 30 impressions (n = 10), and the master model and all casts were digitally scanned with a laboratory optical scanner. The obtained 3D data were converted and recorded as STL files, which were imported to a 3D inspection software program. Angular deviations (buccal, occlusal and interproximal planes) between the study casts and the reference model were measured. Data were analyzed using one-way analysis of variance (ANOVA) and Tukey post hoc test, with 0.05 used as the level of significance. The 3D angular deviations from the master model revealed no significant differences between the DI and SpO impression groups, but there were significant differences in the SpOC impression group, particularly in the buccal and occlusal planes. In all groups, the 3D angular deviation between the most distal scan abutments on each side of the model was significantly different from all other areas when compared to the master model. Within the limits of this study, it is possible to conclude that the indirect closed tray snap on impression technique with unconnected plastic caps exhibited the same three-dimensional accuracies as the direct open tray technique. The indirect closed tray snap on impression technique with connected plastic caps was less accurate than either the indirect closed tray snap on impression technique with unconnected plastic caps or the direct open tray technique. In the case of full arch implant supported prostheses, inaccuracies may be expected in the most distal implants for all the three impression techniques evaluated in this study. Further in vitro and in vivo research is required.

Survival and Success Rates of Monolithic Zirconia Restorations Supported by Teeth and Implants in Bruxer versus Non-Bruxer Patients: A Retrospective Study.

The aim of this study was to assess retrospectively the survival and success rates of monolithic zirconia restorations supported by teeth and implants in bruxer versus non-bruxer patients. Methods: A total of 15 bruxer and 25 non-bruxer patients attended the recall appointment. The bruxer group (mean age of 61.2 ± 13.3 years and follow-up of 58.7 ± 16.8 months) were treated with 331 monolithic zirconia restorations, while the non-bruxer group, with a comparable mean age and follow-up time, were treated with 306 monolithic zirconia restorations. Clinical data were retrieved from the patients' files. At the recall appointment, all supporting teeth and implants were examined for biological and technical complications, and the restorations were evaluated using modified California Dental Association (CDA) criteria. Data were statistically analyzed using survival analysis methods. A significance level of p < 0.05 was used. A total of 31 versus 27 biologic and technical complications were recorded in the bruxer and non-bruxer groups, respectively. No significant differences were found between the two groups regarding overall complications and survival rate. Regarding the type of complication, a significantly higher rate of veneered porcelain chipping (p = 0.045) was observed in the bruxer group. With regard to biological complications, the only complications that exhibited a borderline, although not significant, difference were three fractured teeth exclusively in the bruxer group (p = 0.051), which were replaced with implant-supported restorations. Within the limitations of this study, we conclude that there were no significant differences in the overall survival and success rates of the monolithic zirconia restorations in bruxer versus non-bruxer patients, although veneered zirconia restorations and single tooth abutments exhibited a higher rate of complications in the bruxer group.

Reliability and Correlation of Different Devices for the Evaluation of Primary Implant Stability: An In Vitro Study.

Our aim was to analyze the correlation between the IT evaluated by a surgical motor and the primary implant stability (ISQ) measured by two RFA devices, Osstell and Penguin, in an in vitro model. This study examines the effect of bone type (soft or dense), implant length (13 mm or 8 mm), and implant design (CC: conical connection; IH: internal hexagon), on this correlation. Ninety-six implants were inserted using a surgical motor (IT) into two types of synthetic foam blocks. Initial measurements for both the peak IT and ISQ were recorded at the point when implant insertion was stopped by the surgical motor, and the final measurements were recorded when the implant was completely inserted into the synthetic blocks using only the RFA devices. Our null hypothesis was that there is a good correlation between the devices, independent of the implant length, design, or bone type. We found a positive, significant correlation between the IT, and the Osstell and Penguin devices. Implant length and bone type did not affect this correlation. The correlation between the devices in the CC design was maintained; however, in the IH design it was maintained only between the RFA devices. We concluded that there is a high positive correlation between the IT and ISQ from a mechanical perspective, which was not affected by bone type or implant length but was affected by the implant design.

Three-Dimensional Surface Texture Analysis of Fluoride's Effect on Enamel Erosion.

Enamel erosion has become a common clinical finding that often impairs dental esthetics and function. In the current study, we aimed to implement the three-dimensional surface texture analysis (3DST) method to explore the protective effect of fluoride on surface texture prior to erosive conditions. For each of the 50 teeth used in this study, the polished buccal enamel surface was divided into three separate areas: the first area was untouched polished enamel, the two other surfaces were immersed in 0.3% citric acid for 30 s. One was treated with high-concentration (19,000 ppm) sodium fluoride (NaF) solution prior to acid attack, and the other had no treatment prior to acid exposure. Enamel surface texture and step height measurements were obtained using a high-resolution disk scanning confocal microscope, and SEM images were also acquired. Surfaces treated with fluoride showed fewer variations in 3-D surface texture parameters than the eroded surface compared to the control group (p = 0.001). This was in accordance with the SEM descriptive images. The findings indicate that pre-fluoridated enamel areas were less affected by the acid and showed similar features to the untouched enamel. Moreover, a protective effect of the fluoride treatment against irreversible enamel damage was noted as the surface loss (step-height) was significantly reduced (p = 0.03). The study showed that 3DST analysis is a valuable methodology for detecting and quantifying subtle differences between the surfaces. When exploring the combination of all surface texture parameters, it was revealed that the pre-fluoridated eroded enamel surfaces showed considerable similarity to the untouched enamel.

The Incidence and Nature of Claims against Dentists Related to Periodontal Treatment in Israel during the Years 2005-2019.

BACKGROUND: In recent years, worldwide dental malpractice claims have dramatically increased. The purpose of the present study is to analyze periodontal therapy related claims in Israel that led to legal decisions. METHODS: This retrospective cohort study includes malpractice claims against dental practitioners related to periodontology between 2005 and 2019. Only closed cases where a final decision was made were included. The chi-square test or Fisher exact test for categorical variables were performed and a p value of <0.05 was considered statistically significant. RESULTS: During the study period there were 508 legal claims related to periodontal disease. Most plaintiffs were women (63.4%), and 71.3% of the patients were >35 years old. Most claims (82.8%) were settled out of court and ended in compromise. Claims concerning the treatment of periodontal disease by periodontists accounted only for 4.5% (23/508) of the cases while 95.5% (485/508) of the claims were for complications secondary to another treatment. Prosthodontic treatment was involved with the highest number 54.5%, followed by dental implants 17.7%, and endodontics 11.6%. The allegations were related to pain and distress (84.8%), aggravation of existent periodontal disease (83.3%), tooth loss (78.1%), and violation of autonomy (47%). CONCLUSIONS: The main cause for lawsuits was related to aggravation of periodontal disease during prosthetic or implant therapy and related to suspected faulty or inexistent preoperative diagnosis and planning. PRACTICAL IMPLICATIONS: Periodontal consultation before dental treatment may reduce malpractice risks, adverse events, and un-necessary changes of treatment plans.

Clinical evaluation of particulate allogeneic with and without autogenous bone grafts and resorbable collagen membranes for bone augmentation of atrophic alveolar ridges.

OBJECTIVES: The evaluate the clinical outcome of bone augmentation with the use of particulate mineralized freeze-dried bone allograft (FDBA) with or without the addition of autogeneous bone chips, applied in a bi-layered (BL) technique, covered by a resorbable cross-linked collagen membrane. MATERIAL AND METHODS: Fifty patients presenting with a vertical and/or lateral ridge deficiency of at least 3 mm were included: Group FDBA, N=27 patients, particulate FDBA was the only graft; and Group BL, N=23 patients, a BL bone grafting procedure where autogenous bone chips were the inner layer and FDBA the outer. Bone graft was covered with a ribose cross-linked collagen barrier membrane. Ridge dimensions were clinically or radiographically (computerized tomography scan) measured at the time of the bone augmentation procedure and at implant placement or uncovering and the maximum linear vertical or horizontal calcified tissue gain was calculated. Statistical analysis consisted of linear regression analysis, with maximum bone gain being the dependent variable. RESULTS: In the FDBA group, mean vertical bone gain was 3.47 mm (SD 1.25) and the horizontal, 5 mm (SD 1.28), while in the BL values were 3.5 mm (SD 1.2) and 3.6 mm (SD 1.72), respectively. Addition of autogenous bone does not appear to statistically significantly enhance the results. Spontaneous membrane exposure occurred in 24% of the cases and was the only variant that significantly influenced results (P<0.001). CONCLUSIONS: Large vertical and/or horizontal ridge deficiencies may be treated with FDBA and ribose cross-linked collagen barrier membranes with good clinical outcome. No added effect of the application of a layer of autogenous bone in these bone augmentation procedures could be demonstrated. Spontaneous membrane exposure was the only parameter to affect the degree of new calcified tissue formation.