Epitope diversity of hepatitis B virus capsids: quasi-equivalent variations in spike epitopes and binding of different antibodies to the same epitope.

To investigate the range of antigenic variation of HBV capsids, we have characterized the epitopes for two anti-capsid antibodies by cryo-electron microscopy and image reconstruction of Fab-labeled capsids to approximately 10A resolution followed by molecular modeling. Both antibodies engage residues on the protruding spikes but their epitopes and binding orientations differ. Steric interference effects limit maximum binding to approximately 50% average occupancy in each case. However, the occupancies of the two copies of a given epitope that are present on a single spike differ, reflecting subtle distinctions in structure and hence, binding affinity, arising from quasi-equivalence. The epitope for mAb88 is conformational but continuous, consisting of a loop-helix motif (residues 77-87) on one of the two polypeptide chains in the spike. In contrast, the epitope for mAb842, like most conformational epitopes, is discontinuous, consisting of a loop on one polypeptide chain (residues 74-78) combined with a loop-helix element (residues 78-83) on the other. The epitope of mAb842 is essentially identical with that previously mapped for mAb F11A4, although the binding orientations of the two monoclonal antibodies (mAbs) differ, as do their affinities measured by surface plasmon resonance. From the number of monoclonals (six) whose binding had to be characterized to give the first duplicate epitope, we estimate the total number of core antigen (cAg) epitopes to be of the order of 20. Given that different antibodies may share the same epitope, the potential number of distinct anti-cAg clones should be considerably higher. The observation that the large majority of cAg epitopes are conformational reflects the relative dimensions of a Fab (large) and the small size and close packing of the motifs that are exposed and accessible on the capsid surface.

Conserved features in papillomavirus and polyomavirus capsids.

Capsids of papilloma and polyoma viruses (papovavirus family) are composed of 72 pentameric capsomeres arranged on a skewed icosahedral lattice (triangulation number of seven, T = 7). Cottontail rabbit papillomavirus (CRPV) was reported previously to be a T = 7laevo (left-handed) structure, whereas human wart virus, simian virus 40, and murine polyomavirus were shown to be T = 7dextro (right-handed). The CRPV structure determined by cryoelectron microscopy and image reconstruction was similar to previously determined structures of bovine papillomavirus type 1 (BPV-1) and human papillomavirus type 1 (HPV-1). CRPV capsids were observed in closed (compact) and open (swollen) forms. Both forms have star-shaped capsomeres, as do BPV-1 and HPV-1, but the open CRPV capsids are approximately 2 nm larger in radius. The lattice hands of all papillomaviruses examined in this study were found to be T = 7dextro. In the region of maximum contact, papillomavirus capsomeres interact in a manner similar to that found in polyomaviruses. Although papilloma and polyoma viruses have differences in capsid size (approximately 60 versus approximately 50 nm), capsomere morphology (11 to 12 nm star-shaped versus 8 nm barrel-shaped), and intercapsomere interactions (slightly different contacts between capsomeres), papovavirus capsids have a conserved, 72-pentamer, T = 7dextro structure. These features are conserved despite significant differences in amino acid sequences of the major capsid proteins. The conserved features may be a consequence of stable contacts that occur within capsomeres and flexible links that form among capsomeres.

Hepatitis B virus capsid: localization of the putative immunodominant loop (residues 78 to 83) on the capsid surface, and implications for the distinction between c and e-antigens.

Hepatitis B virus capsid protein comprises a 149 residue "assembly" domain that polymerizes into icosahedral particles, and a 34 residue RNA-binding "protamine" domain. Recently, the capsid structure has been studied to resolutions below 10 A by cryo-electron microscopy, revealing much of its alpha-helical substructure and that it appears to have a novel fold for a capsid protein; however, the resolution is still too low for chain-tracing by conventional criteria. Aiming to establish a fiducial marker to aid in the process of chain-tracing, we have used cryo-microscopy to pinpoint the binding site of a monoclonal antibody that recognizes the peptide from residues 78 to 83. This epitope resides on the outer rim of the 30 A long spikes that protrude from the capsid shell. These spikes are four-helix bundles formed by the pairing of helix-turn-helix motifs from two subunits; by means of a tilting experiment, we have determined that this bundle is right-handed. Variants of the same protein present two clinically important and non-crossreactive antigens: core antigen (HBcAg), which appears early in infection as assembled capsids; and the sentinel e-antigen (HBeAg), a non-particulate form. Knowledge of the binding site of our anti-HBcAg antibody bears on the molecular basis of the distinction between the two antigens, which appears to reflect conformational differences between the assembled and unassembled states of the capsid protein dimer, in addition to epitope masking in capsids.

Use of radial density plots to calibrate image magnification for frozen-hydrated specimens.

Accurate magnification calibration for transmission electron microscopy is best achieved with the use of appropriate standards and an objective calibration technique. We have developed a reliable method for calibrating the magnification of images from frozen-hydrated specimens. Invariant features in radial density plots of a standard are compared with the corresponding features in a "defocused" X-ray model of the same standard. Defocused X-ray models were generated to mimic the conditions of cryo-electron microscopy. The technique is demonstrated with polyoma virus, which was used as an internal standard to calibrate micrographs of bovine papilloma virus type 1 and bacteriophage phi X174. Calibrations of the micrographs were estimated to be accurate to 0.35%-0.5%. Accurate scaling of a three-dimensional structure allows additional calibrations to be made with radial density plots computed from two- or three-dimensional data.

Formation of eLiposomes as a drug delivery vehicle.

This paper discusses the formation of eLiposomes, defined as a liposome with internal emulsion droplets. Liposomes have been investigated as passively targeted drug carriers due to their ability to deliver drugs to a cancerous tumor via the enhanced permeability and retention (EPR) effect. The enclosed emulsion droplets in an eLiposome add the ability to further control the location and time of release from the liposome with ultrasound. Emulsion droplets were formed from perfluorohexane (PFC6) by sonication at 20 kHz and stabilized with dipalmitoyl phosphatidyl choline (DPPC). The size of the resulting droplets was reduced to approximately 100 nm or 50 nm by extrusion through polycarbonate filters of the same size at 50°C. Small unilamellar vesicles (SUVs) were prepared from DPPC by thin film hydration and extrusion through a 50 nm filter. Interdigitated DPPC sheets were prepared from the SUVs by the addition of ethanol to a concentration of 3M. Excess ethanol was removed by centrifugation washing. The sheets were mixed with emulsion and the solution was heated to 50°C, resulting in the refolding of the DPPC sheets into closed vesicles. Emulsion droplets were encapsulated inside of the newly formed eLiposomes. The size of the eLiposomes was reduced by extrusion. Cryogenic transmission electron microscopy (cryoTEM) and negative-staining TEM were used to image the emulsion droplets and the eLiposomes. Encapsulation of emulsion droplets was verified by rotating the microscope stage of cryoTEM samples.

A method for establishing the handedness of biological macromolecules.

When biological macromolecules are imaged in the transmission electron microscope (TEM), their inherent handedness is lost because the three-dimensional (3D) structure is projected onto a two-dimensional (2D) plane, and identical 2D projections can be made from either 3D enantiomer. Nevertheless, tilt experiments in the TEM can be used to determine handedness. These experiments have been performed successfully on negatively stained specimens. More recently, the method was applied to unstained, frozen-hydrated specimens imaged by means of cryoelectron microscopy (cryoTEM) methods. Tilt experiments involve recording two micrographs of the same particles at different tilt angles, computing enantiomeric reconstructions from particle images in one micrograph, predicting orientations of corresponding particles in the second micrograph, and comparing model projections with particle images in the second micrograph. In principle, this procedure can be used to determine the handedness of any biological macromolecule imaged by cryoTEM, provided the enantiomeric reconstructions are distinguishable.

Low-resolution density maps from atomic models: how stepping "back" can be a step "forward".

Atomic-resolution structures have had a tremendous impact on modern biological science. Much useful information also has been gleaned by merging and correlating atomic-resolution structural details with lower-resolution (15-40 A), three-dimensional (3D) reconstructions computed from images recorded with cryo-transmission electron microscopy (cryoTEM) procedures. One way to merge these structures involves reducing the resolution of an atomic model to a level comparable to a cryoTEM reconstruction. A low-resolution density map can be derived from an atomic-resolution structure by retrieving a set of atomic coordinates editing the coordinate file, computing structure factors from the model coordinates, and computing the inverse Fourier transform of the structure factors. This method is a useful tool for structural studies primarily in combination with 3D cryoTEM reconstructions. It has been used to assess the quality of 3D reconstructions, to determine corrections for the phase-contrast transfer function of the transmission electron microscope, to calibrate the dimensions and handedness of 3D reconstructions, to produce difference maps, to model features in macromolecules or macromolecular complexes, and to generate models to initiate model-based determination of particle orientation and origin parameters for 3D reconstruction.

A strategy for determining the orientations of refractory particles for reconstruction from cryo-electron micrographs with particular reference to round, smooth-surfaced, icosahedral viruses.

Cryo-electron microscopy and three-dimensional image reconstruction are powerful tools for analyzing icosahedral virus capsids at resolutions that now extend below 1 nm. However, the validity of such density maps depends critically on correct identification of the viewing geometry of each particle in the data set. In some cases-for example, round capsids with low surface relief-it is difficult to identify orientations by conventional application of the two most widely used approaches-"common lines" and model-based iterative refinement. We describe here a strategy for determining the orientations of such refractory specimens. The key step is to determine reliable orientations for a base set of particles. For each particle, a list of candidate orientations is generated by common lines: correct orientations are then identified by computing a single-particle reconstruction for each candidate and then systematically matching their reprojections with the original images by visual criteria and cross-correlation analysis. This base set yields a first-generation reconstruction that is fed into the model-based procedure. This strategy has led to the structural determination of two viruses that, in our hands, resisted solution by other means.

At sixes and sevens: characterization of the symmetry mismatch of the ClpAP chaperone-assisted protease.

ClpAP, a typical energy-dependent protease, consists of a proteolytic component (ClpP) and a chaperone-like ATPase (ClpA). ClpP is composed of two apposed heptameric rings, whereas in the presence of ATP or ATPgammaS, ClpA is a single hexameric ring. Formation of ClpAP complexes involves a symmetry mismatch as sixfold ClpA stacks axially on one or both faces of sevenfold ClpP. We have analyzed these structures by cryo-electron microscopy. Our three-dimensional reconstruction of ClpA at 29-A resolution shows the monomer to be composed of two domains of similar size that, in the hexamer, form two tiers enclosing a large cavity. Cylindrical reconstruction of ClpAP reveals three compartments: the digestion chamber inside ClpP; a compartment between ClpP and ClpA; and the cavity inside ClpA. They are connected axially via narrow apertures, implying that substrate proteins should be unfolded to allow translocation into the digestion chamber. The cavity inside ClpA is structurally comparable to the "Anfinsen cage" of other chaperones and may play a role in the unfolding of substrates. A geometrical description of the symmetry mismatch was obtained by using our model of ClpA and the crystal structure of ClpP (Wang et al., 1997, Cell 91, 447-456) to identify the particular side views presented by both molecules in individual complexes. The interaction is characterized by a key pair of subunits, one of each protein. A small turn (8.6(o) = 2pi/42; equivalent to a 4-A shift) would transfer the key interaction to another pair of subunits. We propose that nucleotide hydrolysis results in rotation, facilitating the processive digestion of substrate proteins.

Characterization of a conformational epitope on hepatitis B virus core antigen and quasiequivalent variations in antibody binding.

We have characterized a conformational epitope on capsids of hepatitis B virus (HBV) by cryo-electron microscopy and three-dimensional image reconstruction of Fab-labeled capsids to approximately 10-A resolution, combined with molecular modeling. The epitope straddles the interface between two adjacent subunits and is discontinuous, consisting of five peptides-two on one subunit and three on its neighbor. Together, the two icosahedral forms of the HBV capsid-T=3 and T=4 particles-present seven quasiequivalent variants of the epitope. Of these, only three bind this Fab. Occupancy ranges from approximately 100 to approximately 0%, reflecting conformational variations in the epitope and steric blocking effects. In the former, small shifts of the component peptides have large effects on binding affinity. This approach appears to hold general promise for elucidating conformational epitopes of HBV and other viruses, including those of neutralizing and diagnostic significance.

Structural invariance of constitutively active and inactive mutants of acanthamoeba myosin IC bound to F-actin in the rigor and ADP-bound states.

The three single-headed monomeric myosin I isozymes of Acanthamoeba castellanii (AMIs)-AMIA, AMIB, and AMIC-are among the best-studied of all myosins. We have used AMIC to study structural correlates of myosin's actin-activated ATPase. This activity is normally controlled by phosphorylation of Ser-329, but AMIC may be switched into constitutively active or inactive states by substituting this residue with Glu or Ala, respectively. To determine whether activation status is reflected in structural differences in the mode of attachment of myosin to actin, these mutant myosins were bound to actin filaments in the absence of nucleotide (rigor state) and visualized at 24-A resolution by using cryoelectron microscopy and image reconstruction. No such difference was observed. Consequently, we suggest that regulation may be affected not by altering the static (time-averaged) structure of AMIC but by modulating its dynamic properties, i.e., molecular breathing. The tail domain of vertebrate intestinal brush-border myosin I has been observed to swing through 31 degrees on binding of ADP. However, it was predicted on grounds of differing kinetics that any such effects with AMIC should be small [Jontes, J. D., Ostap, E. M., Pollard, T. D. & Milligan, R. A. (1998) J. Cell Biol. 141, 155-162]. We have confirmed this hypothesis by observing actin-associated AMIC in its ADP-bound state. Finally, we compared AMIC to brush-border myosin I and AMIB, which were previously studied under similar conditions. In each case, the shape and angle of attachment to F-actin of the catalytic domain is largely conserved, but the domain structure and disposition of the tail is distinctively different for each myosin.

Diversity of core antigen epitopes of hepatitis B virus.

Core antigen (cAg), the viral capsid, is one of the three major clinical antigens of hepatitis B virus. cAg has been described as presenting either one or two conformational epitopes involving the "immunodominant loop." We have investigated cAg antigenicity by cryo-electron microscopy at approximately 11-A resolution of capsids labeled with monoclonal Fabs, combined with molecular modeling, and describe here two conformational epitopes. Both Fabs bind to the dimeric external spikes, and each epitope has contributions from the loops on both subunits, explaining their discontinuous nature: however, their binding aspects and epitopes differ markedly. To date, four cAg epitopes have been characterized: all are distinct. Although only two regions of the capsid surface are accessible to antibodies, local clustering of the limited number of exposed peptide loops generates a potentially extensive set of discontinuous epitopes. This diversity has not been evident from competition experiments because of steric interference effects. These observations suggest an explanation for the distinction between cAg and e-antigen (an unassembled form of capsid protein) and an approach to immunodiagnosis, exploiting the diversity of cAg epitopes.

Three-dimensional structure of poliovirus receptor bound to poliovirus.

Poliovirus initiates infection by binding to its cellular receptor (Pvr). We have studied this interaction by using cryoelectron microscopy to determine the structure, at 21-A resolution, of poliovirus complexed with a soluble form of its receptor (sPvr). This density map aided construction of a homology-based model of sPvr and, in conjunction with the known crystal structure of the virus, allowed delineation of the binding site. The virion does not change significantly in structure on binding sPvr in short incubations at 4 degrees C. We infer that the binding configuration visualized represents the initial interaction that is followed by structural changes in the virion as infection proceeds. sPvr is segmented into three well-defined Ig-like domains. The two domains closest to the virion (domains 1 and 2) are aligned and rigidly connected, whereas domain 3 diverges at an angle of approximately 60 degrees. Two nodules of density on domain 2 are identified as glycosylation sites. Domain 1 penetrates the "canyon" that surrounds the 5-fold protrusion on the capsid surface, and its binding site involves all three major capsid proteins. The inferred pattern of virus-sPvr interactions accounts for most mutations that affect the binding of Pvr to poliovirus.

Molecular tectonic model of virus structural transitions: the putative cell entry states of poliovirus.

Upon interacting with its receptor, poliovirus undergoes conformational changes that are implicated in cell entry, including the externalization of the viral protein VP4 and the N terminus of VP1. We have determined the structures of native virions and of two putative cell entry intermediates, the 135S and 80S particles, at approximately 22-A resolution by cryo-electron microscopy. The 135S and 80S particles are both approximately 4% larger than the virion. Pseudoatomic models were constructed by adjusting the beta-barrel domains of the three capsid proteins VP1, VP2, and VP3 from their known positions in the virion to fit the 135S and 80S reconstructions. Domain movements of up to 9 A were detected, analogous to the shifting of tectonic plates. These movements create gaps between adjacent subunits. The gaps at the sites where VP1, VP2, and VP3 subunits meet are plausible candidates for the emergence of VP4 and the N terminus of VP1. The implications of these observations are discussed for models in which the externalized components form a transmembrane pore through which viral RNA enters the infected cell.