RESUMEN
This paper presents a 5G new radio (NR) FR2 beamforming system with an integrated transceiver module. A real-time operating module providing enhanced flexibility and capability has been proposed. The integrated RF beamforming system with an integrated transceiver module can be operated in 8Tx-8Rx mode configuration simultaneously. A series-fed structure 8 × 7 microstrip antenna array for compact size and improved directivity is employed in the RF beamforming module. The RF beamforming module incorporates a custom 28 GHz, eight-channel fully differential beamforming IC (BFIC). An eight-channel BFIC in a phased-array beamforming system offers advantages in terms of increased antenna density and improved beam steering precision. The RF beamforming module is integrated with an RF transceiver module that enables the simultaneous up-conversion and down-conversion of the baseband signal. The RF transmitter module consists of a transmitter, a receiver, a signal generator, a power supply, and a control unit. The RF beamforming system can scan horizontally from -50° to +50° with a step of 10°. To achieve an optimized beam pattern, a calibration was conducted. The transmit and receive conversion gain of around 20 dB is achieved with the transceiver module. To verify the communication performance of the manufactured integrated RF beamforming system, a real-time wireless video transmission/reception test was performed at a frequency of 28 GHz, and the video file was transmitted smoothly in real time without interruption within a range of ±50°.
RESUMEN
A 28 GHz fully differential eight-channel beamforming IC (BFIC) with multimode operations is implemented in 65 nm CMOS technology for use in phased array transceivers. The BFIC has an adjustable gain and phase control on each channel to achieve fine beam steering and beam pattern. The BFIC has eight differential beamforming channels each consisting of the two-stage bi-directional amplifier with a precise gain control circuit, a six-bit phase shifter, a three-bit digital step attenuator, and a tuning bit for amplitude and phase variation compensation. The Tx and Rx mode overall gains of the differential eight-channel BFIC are around 11 dB and 9 dB, respectively, at 27.0-29.5 GHz. The return losses of the Tx mode and Rx mode are >10 dB at 27.0-29.5 GHz. The maximum phase of 354° with a phase resolution of 5.6° and the maximum attenuation of 31 dB, including the gain control bits with an attenuation resolution of 1 dB, is achieved at 27.0-29.5 GHz. The root mean square (RMS) phase and amplitude errors are <3.2° and <0.6 dB at 27.0-29.5 GHz, respectively. The chip size is 3.0 × 3.5 mm2, including pads, and Tx mode current consumption is 580 mA at 2.5 V supply voltage.