RESUMEN
This study investigates for the first time the contamination of water and sediment of the Venice Lagoon by twenty Contaminants of Emerging Concern (CECs): three hormones, six pharmaceutical compounds (diclofenac and five antibiotics, three of which are macrolides), nine pesticides (methiocarb, oxadiazon, metaflumizone, triallate, and five neonicotinoids), one antioxidant (BHT), and one UV filter (EHMC). Water and sediment samples were collected in seven sites in four seasons, with the aim of investigating the occurrence, distribution, and possible emission sources of the selected CECs in the studied transitional environment. The most frequently detected contaminants in water were neonicotinoid insecticides (with a frequency of quantification of single contaminants ranging from 73% to 92%), and EHMC (detected in the 77% of samples), followed by BHT (42%), diclofenac (39%), and clarithromycin (35%). In sediment the highest quantification frequencies were those of BHT (54%), estrogens (ranging from 35% to 65%), and azithromycin (46%). Although this baseline study does not highlight seasonal or spatial trends, results suggested that two of the major emission sources of CECs in the Venice Lagoon could be tributary rivers from its drainage basin and treated wastewater, due to the limited removal rates of some CECs in WWTPs. These preliminary results call for further investigations to better map priority emission sources and improve the understanding of CECs environmental behavior, with the final aim of drawing up a site-specific Watch List of CECs for the Venice Lagoon and support the design of more comprehensive monitoring plans in the future.
Asunto(s)
Monitoreo del Ambiente , Sedimentos Geológicos , Contaminantes Químicos del Agua , Sedimentos Geológicos/análisis , Sedimentos Geológicos/química , Contaminantes Químicos del Agua/análisis , Italia , Plaguicidas/análisis , Preparaciones Farmacéuticas/análisisRESUMEN
The cobalt substituted polyoxotungstate [Co6 (H2 O)2 (α-B-PW9 O34 )2 (PW6 O26 )]17- (Co6) displays fast electron transfer (ET) kinetics to photogenerated RuIII (bpy)33+ , 4 to 5 orders of magnitude faster than the corresponding ET observed for cobalt oxide nanoparticles. Mechanistic evidence has been acquired indicating that: (i) the one-electron oxidation of Co6 involves Co(II) aquo or Co(II) hydroxo groups (abbreviated as Co6(II)-OH2 and Co6(II)-OH, respectively, whose speciation in aqueous solution is associated to a pKa of 7.6), and generates a Co(III)-OH moiety (Co6(III)-OH), as proven by transient absorption spectroscopy; (ii) at pH>pKa , the Co6(II)-OHâRuIII (bpy)33+ ET occurs via bimolecular kinetics, with a rate constant k close to the diffusion limit and dependent on the ionic strength of the medium, consistent with reaction between charged species; (iii) at pH Asunto(s)
Complejos de Coordinación/química
, Electrones
, Compuestos Organometálicos/química
, Polímeros/química
, Protones
, Compuestos de Tungsteno/química
, Cobalto/química
, Complejos de Coordinación/síntesis química
, Cinética
, Luz
, Compuestos Organometálicos/efectos de la radiación
, Oxidantes/química
, Oxidantes/efectos de la radiación
, Oxidación-Reducción
, Polímeros/síntesis química
, Rutenio/química
, Rutenio/efectos de la radiación
, Compuestos de Tungsteno/síntesis química
, Agua/química
RESUMEN
Soil and sediment contamination is recognised as one of the most relevant environmental problems caused by past industrial activities and unsustainable waste disposal practices, highlighting the need to develop or improve effective remediation techniques to support sustainable management strategies. In this context, the remediation of sediments dredged from the Mincio river (Italy) contaminated by mercury and heavy hydrocarbons (C12-40) was carried out by applying and implementing the High Performance Solidification/Stabilization technology, aimed at producing safe and reusable cement-based granular materials. The technology was improved by decreasing both the temperature and time of the thermal desorption treatment (from 280 to 110⯰C and from 4-16â¯h to 70â¯min, respectively) and by including a wet conditioning step to the process. Temperature and time reduction allowed to diminish the degradation of the cementitious phases of the granules (usually related to the high temperatures employed in the process), while the wet conditioning step allowed to improve their mechanical properties, as well as to further reduce the leaching of contaminants. The physical-chemical properties of the granules and contaminant leaching in water were investigated by Inductively Coupled Plasma Mass and Optical Emission Spectrometry, Ultraviolet-Visible spectroscopy, Gas Chromatography, X-Ray Powder Diffraction, and Scanning Electron Microscopy, in order to identify the optimal parameters for both thermal and wet conditioning processes. The overall results showed that the use of consecutive thermal and wet conditioning treatment on sedimentary cementitious materials from the High Performance Solidification/Stabilization technology led to the removal of volatile pollutants and to the improvement of granule quality, thus providing a final material that satisfied all the Italian regulatory requirements for reuse. Therefore, the findings obtained in this study may contribute to the development of sustainable management strategies for contaminated soils and sediments, leading to their valorisation through the transformation into reusable materials.
Asunto(s)
Eliminación de Residuos , Contaminantes del Suelo , Cromatografía de Gases y Espectrometría de Masas , Italia , Ríos , SueloRESUMEN
The incidence of skin cancer is increasing both because of climate change and the increase in pollution than people's incorrect habits of sun exposure. In these regards, sunscreen and photoprotection are essential tools in consenting the benefits induced by safe solar light exposition and skin cancer prevention. In this work, a new class of sunscreen filter was synthesized by chemical combination of a physical filter (ZnO) and Oxisol (dihydroxyphenyl benzimidazole carboxylic acid), an antioxidant molecule with booster effect. In this work, a new class of filters with new properties was achieved by direct functionalization of particles surface. A full characterization of this multifunctional ingredient (ZnO-Ox) was conducted: Compared with the simple mixture, the new filter acts as a multifunctional molecule showing a higher Sun Protection Factor (SPF), a better cytotoxic profile (MTT and NRU assay), and anti-acne activity. A strong reduction of photocatalytic activity of ZnO was observed, also improving the safety profile.
Asunto(s)
Antioxidantes , Bencimidazoles , Protectores Solares , Rayos Ultravioleta/efectos adversos , Óxido de Zinc , Células 3T3 , Animales , Antioxidantes/química , Antioxidantes/farmacología , Bencimidazoles/química , Bencimidazoles/farmacología , Humanos , Ratones , Neoplasias Cutáneas/epidemiología , Neoplasias Cutáneas/metabolismo , Neoplasias Cutáneas/patología , Neoplasias Cutáneas/prevención & control , Luz Solar/efectos adversos , Protectores Solares/química , Protectores Solares/farmacología , Óxido de Zinc/química , Óxido de Zinc/farmacologíaRESUMEN
Cyclic C6 O4 (cC6 O4 , CAS number 1190931-27-1) is a new-generation polyfluorinated alkyl substance (PFAS) used as a polymerization aid in the synthesis of fluoropolymers, which has been produced in Italy since 2011. A review of the properties of cC6 O4 , focused on environmental distribution and ecotoxicology, was conducted. The EQuilibrium Criterion model was applied, using default environmental scenarios, to estimate environmental distribution and fate. In a situation of static thermodynamic equilibrium in a closed system (Level I), cC6 O4 distributes mainly to water (97.6%) and in a minimal amount to soil (2.3%). In a more realistic scenario (Level III), with dynamic conditions in an open system, with advection in air and water and with equal emissions in air and water, the major amount of the compound is transported through water advection. Monitoring data, mainly referring to surface and groundwater, are available for water bodies close to the production sites (maximum measured concentration 52 µg/L) as well as for a wider area in the river Po watershed with concentrations generally lower than 1 µg/L. Few values are also available for concentration in biota. Effect data indicate low toxicity on all tested organisms with no observed effect concentration (NOEC) values always higher than the maximum concentrations tested (100 mg/L for acute tests). Bioaccumulation potential is also very low. A comparison with selected widely used PFAS with five to eight C atoms indicates that cC6 O4 is substantially less dangerous to aquatic organisms. For the time being, an ecological risk for the aquatic ecosystem may be excluded even in directly exposed ecosystems. However, for a complete assessment of the suitability of cC6 O4 as a substitute for other PFAS (namely, perfluorooctanoic acid), more comprehensive chronic experiments are necessary, to produce realistic NOEC, as well as higher tier experiments (e.g., mesocosms) capable of providing ecologically relevant endpoints. Moreover, a more accurate evaluation of the environmental persistence would be necessary. Integr Environ Assess Manag 2023;19:1636-1648. © 2023 SETAC.
Asunto(s)
Fluorocarburos , Contaminantes Químicos del Agua , Ecosistema , Ecotoxicología , Exposición a Riesgos Ambientales , Fluorocarburos/toxicidad , Agua , Contaminantes Químicos del Agua/toxicidad , Contaminantes Químicos del Agua/análisisRESUMEN
In recent years, the issue of coral bleaching has led to restrictions in some tropical locations (i.e., Palau, Hawaii, etc.) on the use of some organic UV sunscreen filters, such as oxybenzone and ethyl hexyl methoxycinnamate. In contrast, ZnO is considered safe for marine environments and thus is often used without considering its photocatalytic and oxidative activities related to the generation of O2â¢- and HOâ¢. Moreover, ZnO needs to be used in combination with other filters to reach higher protection factors. Thus, the study of its interaction with formulations and with organic filters is important in sunscreen technology for the development of safer by-design products. In this work, the photocatalytic activity of zinc oxides with different surface areas (30, 25 and 9 m2/g) and their interaction with selected organic sunscreen filters were investigated. In particular, the ZnO photocatalytic kinetics were studied following the photodegradation of Acid Blue 9 (AB9) observing a first-order reaction with a chemical regime. Our evaluations of the selective inhibitions by hvb+ and HO⢠demonstrated a substantial predominance of the hydroxide radicals in the expression of the photocatalysis, a trend that was also confirmed by the irradiation of ZnO in an ethanolic solution. Indeed, the formulations containing both ZnO and organic filters defined as "safe" for coral reefs (i.e., Diethylamino Hydroxybenzoyl Hexyl Benzoate, DHHB, and Ethylhexyl Triazone, EHT) showed a non-negligible photocatalytic oxidation and thus the combination was underlined as safe to use.
RESUMEN
Bone infections following open bone fracture or implant surgery remain a challenge in the orthopedics field. In order to avoid high doses of systemic drug administration, optimized local antibiotic release from scaffolds is required. 3D additive manufactured (AM) scaffolds made with biodegradable polymers are ideal to support bone healing in non-union scenarios and can be given antimicrobial properties by the incorporation of antibiotics. In this study, ciprofloxacin and gentamicin intercalated in the interlamellar spaces of magnesium aluminum layered double hydroxides (MgAl) and α-zirconium phosphates (ZrP), respectively, are dispersed within a thermoplastic polymer by melt compounding and subsequently processed via high temperature melt extrusion AM (~190 °C) into 3D scaffolds. The inorganic fillers enable a sustained antibiotics release through the polymer matrix, controlled by antibiotics counterions exchange or pH conditions. Importantly, both antibiotics retain their functionality after the manufacturing process at high temperatures, as verified by their activity against both Gram + and Gram - bacterial strains. Moreover, scaffolds loaded with filler-antibiotic do not impair human mesenchymal stromal cells osteogenic differentiation, allowing matrix mineralization and the expression of relevant osteogenic markers. Overall, these results suggest the possibility of fabricating dual functionality 3D scaffolds via high temperature melt extrusion for bone regeneration and infection prevention.
RESUMEN
Copper oxide nanoparticles (CuO NPs) have previously been shown to cause dose-dependent pulmonary toxicity following inhalation. Here, CuO NPs (10 nm), coated with polyethylenimine (PEI) or ascorbate (ASC) resulting in positively or negatively charged NPs, respectively, were evaluated. Rats were exposed nose-only to similar exposure dose levels of ASC or PEI coated CuO NPs for 5 consecutive days. On day 6 and day 27 post-exposure, pulmonary toxicity markers in bronchoalveolar lavage fluid (BALF), lung histopathology and genome-wide transcriptomic changes in lungs, were assessed. BALF analyses showed a dose-dependent pulmonary inflammation and cell damage, which was supported by the lung histopathological findings of hypertrophy/hyperplasia of bronchiolar and alveolar epithelium, interstitial and alveolar inflammation, and paracortical histiocytosis in mediastinal lymph nodes for both types of CuO NPs. Transcriptomics analysis showed that pathways related to inflammation and cell proliferation were significantly activated. Additionally, we found evidence for the dysregulation of drug metabolism-related genes, especially in rats exposed to ASC-coated CuO NPs. Overall, no differences in the type of toxic effects and potency between the two surface coatings could be established, except with respect to the (regional) dose that initiates bronchiolar and alveolar hypertrophy. This disproves our hypothesis that differences in surface coatings affect the pulmonary toxicity of CuO NPs.
Asunto(s)
Enfermedades Pulmonares , Nanopartículas , Animales , Cobre/toxicidad , Hipertrofia , Inflamación , Exposición por Inhalación/efectos adversos , Nanopartículas/toxicidad , Óxidos , Ratas , TranscriptomaRESUMEN
The application of an innovative solidification/stabilization (S/S) process was investigated for the remediation of Pb contaminated soil. The performance of Pb stabilization was evaluated by comparing the use of calcium aluminate cement (CAC) and an alkali activated metakaolin binder vs the Ordinary Portland Cement (OPC). The phase composition of the stabilized products was investigated by XRD and correlated to the internal microstructure obtained by SEM-EDX imaging. Leaching tests were performed to ascertain the effectiveness of the proposed binders in the S/S of the contaminated soil, and Pb release was evaluated for each binding system. The overall results proved that multiple mechanisms are involved in Pb retention and that key parameters regulating the stabilization performance are strongly dependent on the type of applied binder system. Pb was found to be associated to C-S-H in the case of OPC, whereas ettringite played a key role in the retention of this contaminant using the CAC binder. The use of a NaOH activated metakaolin resulted in almost total retention of Pb, despite a lack of solidification, highlighting the importance of pH in the regulation of the leaching behavior.
RESUMEN
Skin cancer is the most common malignant cancer with an incidence of 1 million cases/year. It is well known that exposure to UV radiation from sunlight leads the most frequent risk factors for several skin disorders including skin cancer. Sunscreen filters represent a valid protection against dangerous effects derived from UV radiation, and they can be divided in organic and inorganic UV filters. Adding, at the product formulation, molecules with booster effect, or also substances that can increase the protecting effectiveness via synergic mechanisms, can further enhance their protection activity. Moreover, this approach leads to develop formulations with high SPF (Sun Protection Factor) with a reduced content of UV filters, this is in line with the recent decisions of yet a few countries (Palau, Thailand, Philippines, and Hawaii) to ban some sunscreen filters to preserve marine environments (i.e., reef). In this work, a new class of sunscreen UV filters has been synthesized, by means the combination of physical filter and Oxisol, an antioxidant molecule with booster effect. In this study, the synthesis of new physical multifunctional ingredients is reported, by means the direct surface functionalization of inorganic filters (in particular TiO2) with Oxisol. In this study, the full characterization of these multifunctional ingredients is also reported, in addition to the cytotoxicity tests, the photocatalytic activity and the rheological properties involved on skin application.
RESUMEN
A pentacyclic quinoid dye, KuQ(O)3OH, combining (i) extended visible absorption up to 600 nm, (ii) excited state reduction potential >2 V vs. NHE, and (iii) a photoinduced proton-coupled electron transfer mechanism, has been used for the fabrication of dye-sensitized SnO2 photoanodes integrating a ruthenium polyoxometalate water oxidation catalyst. The resulting photoelectrode SnO2|KuQ(O)3OH|Ru4POM displays a light harvesting efficiency up to 90% in the range 500-600 nm, an onset potential as low as 0.2 V vs. NHE at pH 5.8, photoinduced oxygen evolution with a faradaic efficiency of 70 ± 15% and an absorbed-photon-to-current efficiency up to 0.12 ± 0.01%.
RESUMEN
The increasing concern about antibiotic-resistance has led to the search for alternative antimicrobial agents. In this effort, different metal oxide nanomaterials are currently under investigation, in order to assess their effectiveness, safety and mode of action. This study focused on CuO nanoparticles (CuO NPs) and was aimed at evaluating how the properties and the antimicrobial activity of these nanomaterials may be affected by the interaction with ligands present in biological and environmental media. Ligands can attach to the surface of particles and/or contribute to their dissolution through ligand-assisted ion release and the formation of complexes with copper ions. Eight natural amino acids (L-Arg, L-Asp, L-Glu, L-Cys, L-Val, L-Leu, L-Phe, L-Tyr) were chosen as model molecules to investigate these interactions and the toxicity of the obtained materials against the Gram-positive bacterium Staphylococcus epidermidis ATCC 35984. A different behavior from pristine CuO NPs was observed, depending on the aminoacidic side chain. These results were supported by physico-chemical and colloidal characterization carried out by means of Fourier-Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Thermo-Gravimetric Analysis (TGA), Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and light scattering techniques (Dynamic Light Scattering (DLS), Electrophoretic Light Scattering (ELS) and Centrifugal Separation Analysis (CSA).
RESUMEN
Copper oxide (CuO) nanoparticles (NPs) and copper carbonate nanoparticles (Cu2CO3(OH)2 NPs have applications as antimicrobial agents and wood preservatives: an application that may lead to oral ingestion via hand to mouth transfer. Rats were exposed by oral gavage to CuO NPs and Cu2CO3(OH)2 NPs for five consecutive days with doses from 1 to 512 mg/kg and 4 to 128 mg/kg per day, respectively, and toxicity was evaluated at days 6 and 26. Both CuO NPs and Cu2CO3(OH)2 NPs induced changes in hematology parameters, as well as clinical chemistry markers (e.g. increased alanine aminotransferase, ALT) indicative of liver damage For CuO NPs histopathological alterations were observed in bone marrow, stomach and liver mainly consisting of an inflammatory response, ulceration, and degeneration. Cu2CO3(OH)2 NPs induced morphological alterations in the stomach, liver, intestines, spleen, thymus, kidneys, and bone marrow. In spleen and thymus lymphoid, depletion was noted that warrants further immunotoxicological evaluation. The NPs showed partial dissolution in artificial simulated stomach fluids, while in intestinal conditions, the primary particles simultaneously shrank and agglomerated into large structures. This means that both copper ions and the particulate nanoforms should be considered as potential causal agents for the observed toxicity. For risk assessment, the lowest bench mark dose (BMD) was similar for both NPs for the serum liver enzyme AST (an indication of liver toxicity), being 26.2 mg/kg for CuO NPs and 30.8 mg/kg for Cu2CO3(OH)2 NPs. This was surprising since the histopathology evidence demonstrates more severe organ damage for Cu2CO3(OH)2 NPs than for CuO NPs.