RESUMEN
The negative diversity-invasion relationship observed in microbial invasion studies is commonly explained by competition between the invader and resident populations. However, whether this relationship is affected by invader-resident cooperative interactions is unknown. Using ecological and mathematical approaches, we examined the survival and functionality of Aminobacter niigataensis MSH1 to mineralize 2,6-dichlorobenzamide (BAM), a groundwater micropollutant affecting drinking water production, in sand microcosms when inoculated together with synthetic assemblies of resident bacteria. The assemblies varied in richness and in strains that interacted pairwise with MSH1, including cooperative and competitive interactions. While overall, the negative diversity-invasion relationship was retained, residents engaging in cooperative interactions with the invader had a positive impact on MSH1 survival and functionality, highlighting the dependency of invasion success on community composition. No correlation existed between community richness and the delay in BAM mineralization by MSH1. The findings suggest that the presence of cooperative residents can alleviate the negative diversity-invasion relationship.
Asunto(s)
Microbiota , Benzamidas , Interacciones Microbianas , Phyllobacteriaceae/fisiología , Agua Subterránea/microbiología , BiodiversidadRESUMEN
Biofilms within drinking water distribution systems serve as a habitat for drinking water microorganisms. However, biofilms can negatively impact drinking water quality by causing water discoloration and deterioration and can be a reservoir for unwanted microorganisms. In this study, we investigated whether indicator organisms for drinking water quality, such as coliforms, can settle in mature drinking water biofilms. Therefore, a biofilm monitor consisting of glass rings was used to grow and sample drinking water biofilms. Two mature drinking water biofilms were characterized by flow cytometry, ATP measurements, confocal laser scanning microscopy, and 16S rRNA sequencing. Biofilms developed under treated chlorinated surface water supply exhibited lower cell densities in comparison with biofilms resulting from treated groundwater. Overall, the phenotypic as well as the genotypic characteristics were significantly different between both biofilms. In addition, the response of the biofilm microbiome and possible biofilm detachment after minor water quality changes were investigated. Limited changes in pH and free chlorine addition, to simulate operational changes that are relevant for practice, were evaluated. It was shown that both biofilms remained resilient. Finally, mature biofilms were prone to invasion of the coliform, Serratia fonticola. After spiking low concentrations (i.e., ±100 cells/100 mL) of the coliform to the corresponding bulk water samples, the coliforms were able to attach and get established within the mature biofilms. These outcomes emphasize the need for continued research on biofilm detachment and its implications for water contamination in distribution networks. IMPORTANCE: The revelation that even low concentrations of coliforms can infiltrate into mature drinking water biofilms highlights a potential public health concern. Nowadays, the measurement of coliform bacteria is used as an indicator for fecal contamination and to control the effectiveness of disinfection processes and the cleanliness and integrity of distribution systems. In Flanders (Belgium), 533 out of 18,840 measurements exceeded the established norm for the coliform indicator parameter in 2021; however, the source of microbial contamination is mostly unknown. Here, we showed that mature biofilms, are susceptible to invasion of Serratia fonticola. These findings emphasize the importance of understanding and managing biofilms in drinking water distribution systems, not only for their potential to influence water quality, but also for their role in harboring and potentially disseminating pathogens. Further research into biofilm detachment, long-term responses to operational changes, and pathogen persistence within biofilms is crucial to inform strategies for safeguarding drinking water quality.
Asunto(s)
Biopelículas , Agua Potable , Enterobacteriaceae , Biopelículas/crecimiento & desarrollo , Agua Potable/microbiología , Enterobacteriaceae/fisiología , Enterobacteriaceae/aislamiento & purificación , ARN Ribosómico 16S/genética , Calidad del Agua , Purificación del Agua , Microbiología del Agua , Abastecimiento de AguaRESUMEN
Nanoplastics (NPs) are omnipresent in the environment and contribute to human exposure. However, little is known regarding the long-term effects of NPs on human health. In this study, human intestinal Caco-2 cells were exposed to polystyrene nanoplastics (nanoPS) in an environmentally relevant concentration range (102-109 particles/mL) under two realistic exposure scenarios. In the first scenario, cells were repeatedly exposed to nanoPS every 2 days for 12 days to study the long-term effects. In the second scenario, only nanoPS was added once and Caco-2 cells were cultured for 12 days to study the duration of the initial effects of NPs. Under repeated dosing, initial subtle effects on mitochondria induced by low concentrations would accrue over consistent exposure to nanoPS and finally lead to significant impairment of mitochondrial respiration, mitochondrial mass, and cell differentiation process at the end of prolonged exposure, accompanied by significantly increased glycolysis over the whole exposure period. Single dosing of nanoPS elicited transient effects on mitochondrial and glycolytic functions, as well as increased reactive oxygen species (ROS) production in the early phase of exposure, but the self-recovery capacity of cells mitigated these effects at intermediate culture times. Notably, secondary effects on glycolysis and ROS production were observed during the late culture period, while the cell differentiation process and mitochondrial mass were not affected at the end. These long-term effects are of crucial importance for comprehensively evaluating the health hazards arising from lifetime exposure to NPs, complementing the extensively observed acute effects associated with prevalent short-term exposure to high concentrations. Our study underlines the need to study the toxicity of NPs in realistic long-term exposure scenarios such as repeated dosing.
Asunto(s)
Glucólisis , Mitocondrias , Poliestirenos , Especies Reactivas de Oxígeno , Humanos , Poliestirenos/toxicidad , Mitocondrias/efectos de los fármacos , Mitocondrias/metabolismo , Células CACO-2 , Glucólisis/efectos de los fármacos , Especies Reactivas de Oxígeno/metabolismo , Nanopartículas/toxicidadRESUMEN
The removal of volatile organic compounds (VOCs) in air is of utmost importance to safeguard both environmental quality and human well-being. However, the low aqueous solubility of hydrophobic VOCs results in poor removal in waste gas biofilters (BFs). In this study, we evaluated the addition of (bio)surfactants in three BFs (BF1 and BF2 mixture of compost and wood chips (C + WC), and BF3 filled with expanded perlite) to enhance the removal of cyclohexane and hexane from a polluted gas stream. Experiments were carried out to select two (bio)surfactants (i.e., Tween 80 and saponin) out of five (sodium dodecyl sulfate (SDS), Tween 80, surfactin, rhamnolipid and saponin) from a physical-chemical (i.e., decreasing VOC gas-liquid partitioning) and biological (i.e., the ability of the microbial consortium to grow on the (bio)surfactants) point of view. The results show that adding Tween 80 at 1 critical micelle concentration (CMC) had a slight positive effect on the removal of both VOCs, in BF1 (e.g., 7.0 ± 0.6 g cyclohexane m-3 h-1, 85 ± 2% at 163 s; compared to 6.7 ± 0.4 g cyclohexane m-3 h-1, 76 ± 2% at 163 s and 0 CMC) and BF2 (e.g., 4.3 ± 0.4 g hexane m-3 h-1, 27 ± 2% at 82 s; compared to 3.1 ± 0.7 g hexane m-3 h-1, 16 ± 4% at 82 s and 0 CMC), but a negative effect in BF3 at either 1, 3 and 9 CMC (e.g., 2.4 ± 0.4 g hexane m-3 h-1, 30 ± 4% at 163 s and 1 CMC; compared to 4.6 ± 1.0 g hexane m-3 h-1, 43 ± 8% at 163 s and 0 CMC). In contrast, the performance of all BFs improved with the addition of saponin, particularly at 3 CMC. Notably, in BF3, the elimination capacity (EC) and removal efficiency (RE) doubled for both VOCs (i.e., 9.1 ± 0.6 g cyclohexane m-3 h-1, 49 ± 3%; 4.3 ± 0.3 g hexane m-3 h-1, 25 ± 3%) compared to no biosurfactant addition (i.e., 4.5 ± 0.4 g cyclohexane m-3 h-1, 23 ± 3%; hexane 2.2 ± 0.5 g m-3 h-1, 10 ± 2%) at 82 s. Moreover, the addition of the (bio)surfactants led to a shift in the microbial consortia, with a different response in BF1-BF2 compared to BF3. This study evaluates for the first time the use of saponin in BFs, it demonstrates that cyclohexane and hexane RE can be improved by (bio)surfactant addition, and it provides recommendations for future studies in this field.
Asunto(s)
Saponinas , Compuestos Orgánicos Volátiles , Humanos , Tensoactivos/química , Hexanos , Polisorbatos , Ciclohexanos , Filtración/métodosRESUMEN
Biofilms are complex polymicrobial communities which are often associated with human infections such as the oral disease periodontitis. Studying these complex communities under controlled conditions requires in vitro biofilm model systems that mimic the natural environment as close as possible. This study established a multispecies periodontal model in the drip flow biofilm reactor in order to mimic the continuous flow of nutrients at the air-liquid interface in the oral cavity. The design is engineered to enable real-time characterization. A community of five bacteria, Streptococcus gordonii-GFPmut3*, Streptococcus oralis-GFPmut3*, Streptococcus sanguinis-pVMCherry, Fusobacterium nucleatum, and Porphyromonas gingivalis-SNAP26 is visualized using two distinct fluorescent proteins and the SNAP-tag. The biofilm in the reactor develops into a heterogeneous, spatially uniform, dense, and metabolically active biofilm with relative cell abundances similar to those in a healthy individual. Metabolic activity, structural features, and bacterial composition of the biofilm remain stable from 3 to 6 days. As a proof of concept for our periodontal model, the 3 days developed biofilm is exposed to a prebiotic treatment with L-arginine. Multifaceted effects of L-arginine on the oral biofilm were validated by this model setup. L-arginine showed to inhibit growth and incorporation of the pathogenic species and to reduce biofilm thickness and volume. Additionally, L-arginine is metabolized by Streptococcus gordonii-GFPmut3* and Streptococcus sanguinis-pVMCherry, producing high levels of ornithine and ammonium in the biofilm. In conclusion, our drip flow reactor setup is promising in studying spatiotemporal behavior of a multispecies periodontal community.ImportancePeriodontitis is a multifactorial chronic inflammatory disease in the oral cavity associated with the accumulation of microorganisms in a biofilm. Not the presence of the biofilm as such, but changes in the microbiota (i.e., dysbiosis) drive the development of periodontitis, resulting in the destruction of tooth-supporting tissues. In this respect, novel treatment approaches focus on maintaining the health-associated homeostasis of the resident oral microbiota. To get insight in dynamic biofilm responses, our research presents the establishment of a periodontal biofilm model including Streptococcus gordonii, Streptococcus oralis, Streptococcus sanguinis, Fusobacterium nucleatum, and Porphyromonas gingivalis. The added value of the model setup is the combination of simulating continuously changing natural mouth conditions with spatiotemporal biofilm profiling using non-destructive characterization tools. These applications are limited for periodontal biofilm research and would contribute in understanding treatment mechanisms, short- or long-term exposure effects, the adaptation potential of the biofilm and thus treatment strategies.
Asunto(s)
Bacterias , Periodontitis , Humanos , Streptococcus gordonii/fisiología , Fusobacterium nucleatum , Streptococcus sanguis , Streptococcus oralis , Biopelículas , Arginina/metabolismo , Porphyromonas gingivalis/fisiologíaRESUMEN
BACKGROUND: It is increasingly recognized that conventional food production systems are not able to meet the globally increasing protein needs, resulting in overexploitation and depletion of resources, and environmental degradation. In this context, microbial biomass has emerged as a promising sustainable protein alternative. Nevertheless, often no consideration is given on the fact that the cultivation conditions affect the composition of microbial cells, and hence their quality and nutritional value. Apart from the properties and nutritional quality of the produced microbial food (ingredient), this can also impact its sustainability. To qualitatively assess these aspects, here, we investigated the link between substrate availability, growth rate, cell composition and size of Cupriavidus necator and Komagataella phaffii. RESULTS: Biomass with decreased nucleic acid and increased protein content was produced at low growth rates. Conversely, high rates resulted in larger cells, which could enable more efficient biomass harvesting. The proteome allocation varied across the different growth rates, with more ribosomal proteins at higher rates, which could potentially affect the techno-functional properties of the biomass. Considering the distinct amino acid profiles established for the different cellular components, variations in their abundance impacts the product quality leading to higher cysteine and phenylalanine content at low growth rates. Therefore, we hint that costly external amino acid supplementations that are often required to meet the nutritional needs could be avoided by carefully applying conditions that enable targeted growth rates. CONCLUSION: In summary, we demonstrate tradeoffs between nutritional quality and production rate, and we discuss the microbial biomass properties that vary according to the growth conditions.
Asunto(s)
Aminoácidos , Proteoma , Biomasa , Cisteína , Tamaño de la CélulaRESUMEN
Biogenic palladium nanoparticles (bio-Pd NPs) are used for the reductive transformation and/or dehalogenation of persistent micropollutants. In this work, H2 (electron donor) was produced in situ by an electrochemical cell, permitting steered production of differently sized bio-Pd NPs. The catalytic activity was first assessed by the degradation of methyl orange. The NPs showing the highest catalytic activity were selected for the removal of micropollutants from secondary treated municipal wastewater. The synthesis at different H2 flow rates (0.310 L/hr or 0.646 L/hr) influenced the bio-Pd NPs size. The NPs produced over 6 hr at a low H2 flow rate had a larger size (D50 = 39.0 nm) than those produced in 3 hr at a high H2 flow rate (D50 = 23.2 nm). Removal of 92.1% and 44.3% of methyl orange was obtained after 30 min for the NPs with sizes of 39.0 nm and 23.2 nm, respectively. Bio-Pd NPs of 39.0 nm were used to treat micropollutants present in secondary treated municipal wastewater at concentrations ranging from µg/L to ng/L. Effective removal of 8 compounds was observed: ibuprofen (69.5%) < sulfamethoxazole (80.6%) < naproxen (81.4%) < furosemide (89.7%) < citalopram (91.7%) < diclofenac (91.9%) < atorvastatin (> 94.3%) < lorazepam (97.2%). Removal of fluorinated antibiotics occurred at > 90% efficiency. Overall, these data indicate that the size, and thus the catalytic activity of the NPs can be steered and that the removal of challenging micropollutants at environmentally relevant concentrations can be achieved through the use of bio-Pd NPs.
Asunto(s)
Nanopartículas del Metal , Contaminantes Químicos del Agua , Purificación del Agua , Aguas Residuales , Paladio/química , Contaminantes Químicos del Agua/metabolismoRESUMEN
Fermentation at elevated hydrostatic pressure is a novel strategy targeting product selectivity. However, the role of inoculum history and cross-resistance, that is, acquired tolerance from incubation under distinctive environmental stress, remains unclear in high-pressure operation. In our here presented work, we studied fermentation and microbial community responses of halotolerant marine sediment inoculum (MSI) and anaerobic digester inoculum (ADI), pre-incubated in serum bottles at different temperatures and subsequently exposed to mild hydrostatic pressure (MHP; < 10 MPa) in stainless steel reactors. Results showed that MHP effects on microbial growth, activity, and community structure were strongly temperature-dependent. At moderate temperature (20°C), biomass yield and fermentation were not limited by MHP; suggesting a cross-resistance effect from incubation temperature and halotolerance. Low temperatures (10°C) and MHP imposed kinetic and bioenergetic limitations, constraining growth and product formation. Fermentation remained favorable in MSI at 28°C and ADI at 37°C, despite reduced biomass yield resulting from maintenance and decay proportionally increasing with temperature. Microbial community structure was modified by temperature during the enrichment, and slight differences observed after MHP-exposure did not compromise functionality. Results showed that the relation incubation temperature-halotolerance proved to be a modifier of microbial responses to MHP and could be potentially exploited in fermentations to modulate product/biomass ratio.
Asunto(s)
Microbiota , Fermentación , Sedimentos Geológicos , Presión Hidrostática , TemperaturaRESUMEN
Bioaugmentation often involves an invasion process requiring the establishment and activity of a foreign microbe in the resident community of the target environment. Interactions with resident micro-organisms, either antagonistic or cooperative, are believed to impact invasion. However, few studies have examined the variability of interactions between an invader and resident species of its target environment, and none of them considered a bioremediation context. Aminobacter sp. MSH1 mineralizing the groundwater micropollutant 2,6-dichlorobenzamide (BAM), is proposed for bioaugmentation of sand filters used in drinking water production to avert BAM contamination. We examined the nature of the interactions between MSH1 and 13 sand filter resident bacteria in dual and triple species assemblies in sand microcosms. The residents affected MSH1-mediated BAM mineralization without always impacting MSH1 cell densities, indicating effects on cell physiology rather than on cell number. Exploitative competition explained most of the effects (70%), but indications of interference competition were also found. Two residents improved BAM mineralization in dual species assemblies, apparently in a mutual cooperation, and overruled negative effects by others in triple species systems. The results suggest that sand filter communities contain species that increase MSH1 fitness. This opens doors for assisting bioaugmentation through co-inoculation with "helper" bacteria originating from and adapted to the target environment.
Asunto(s)
Agua Subterránea , Phyllobacteriaceae , Purificación del Agua , Bacterias , Benzamidas , Biodegradación Ambiental , Purificación del Agua/métodosRESUMEN
OBJECTIVE: Chlorhexidine mouthrinses are marketed in different formulations. This study aimed at investigating qualitative and quantitative changes in in-vitro multispecies oral biofilms, induced by different chlorhexidine-containing mouthrinses. BACKGROUND DATA: Earlier studies comparing chlorhexidine mouthrinses are either clinical studies or in-vitro studies assessing the antimicrobial efficacy of the mouthrinses. However, no clear investigations are available regarding ecological impact of different chlorhexidine formulations on in-vitro multispecies oral biofilms after rinsing with different chlorhexidine formulations. METHODS: Nine commercially available chlorhexidine mouthrinses were selected. Multispecies oral communities (14 species) were grown for 48 h in a Biostat-B Twin bioreactor. After that, they were used to develop biofilms on the surface of hydroxyapatite disks in 24-well pates for 48 h. Biofilms were then rinsed once or multiple times with the corresponding mouthrinse. Biofilms were collected before starting the rinsing experiment and every 24 h for 3 days and vitality quantitative PCR was performed. The experiment was repeated 3 independent times on 3 different days and the results were analyzed using a linear mixed model. RESULTS: The mouthrinses provoked different effects in terms of change in total viable bacterial load (VBL), ecology, and community structure of the multispecies biofilms. There was no relation between chlorhexidine concentrations, presence, or absence of cetylpyridinium chloride and/or alcohol, and the observed effects. Some tested chlorhexidine mouthrinses (MC, HG, HH, and HI) strongly lowered the total VBL (≈1007 Geq/ml), but disrupted biofilm symbiosis (≥40% of the biofilms communities are pathobionts). On the other hand, other tested chlorhexidine mouthrinses (MD, ME, and HF) had limited impact on total VBL (≥1010 Geq/ml), but improved the biofilm ecology and community structure (≤10% of the biofilms communities are pathobionts). CONCLUSION: Not all chlorhexidine mouthrinses have the same effect on oral biofilms. Their effect seems to be strongly product dependent and vary according to their compositions and formulations.
Asunto(s)
Antiinfecciosos Locales , Antiinfecciosos , Antiinfecciosos Locales/farmacología , Biopelículas , Cetilpiridinio/farmacología , Clorhexidina/farmacología , Antisépticos Bucales/farmacologíaRESUMEN
The production of shrimp is often performed in earthen outdoor ponds in which the high input of feed and faeces on the bottom can result in deterioration of the water quality, which negatively impacts the animals and the environment. Here, we investigate the potential of sodium molybdate (Na2MoO4·2H2O), sodium nitrate (NaNO3) and sodium percarbonate (Na2CO3·1.5H2O2) to control sulphide production in a simulated shrimp pond bottom system that included the sediment, overlaying artificial seawater and organic matter input in the form of shrimp feed and shrimp faeces. Sediment depth gradient measurements of oxygen, H2S and pH were obtained during 7 days of incubation using microelectrodes. The most significant impact in terms of H2S, was observed for 50 mg/L sodium molybdate. At the water-sediment interface, there was up to 73% less H2S detected for this treatment in comparison to a control treatment, while in the deeper layers of the sediment it was up to 47% less H2S. The residual sulphate concentrations in the molybdate treated samples were 16 ± 4% higher than the control, indicating an inhibition in sulphate reduction. Nitrate and sodium percarbonate treatments also showed a limited capacity to decrease H2S entering in the water column, yet no clear difference in H2S concentrations in the sediment compared to the control were observed. Molybdate treatment appears to work through the inhibition of sulphate reducing bacteria in situ for the control of H2S production better than the chemical oxygen boosters or nitrate treatment.
Asunto(s)
Sedimentos Geológicos , Estanques , Animales , Molibdeno , Agua de Mar , SulfurosRESUMEN
The development of effective management strategies to reduce the occurrence of diseases in aquaculture is hampered by the limited knowledge on the microbial ecology of these systems. In this study, the dynamics and dominant community assembly processes in the rearing water of Litopenaeus vannamei larviculture tanks were determined. Additionally, the contribution of peripheral microbiomes, such as those of live and dry feeds, to the rearing water microbiome were quantified. The community assembly in the hatchery rearing water over time was dominated by stochasticity, which explains the observed heterogeneity between replicate cultivations. The community undergoes two shifts that match with the dynamics of the algal abundances in the rearing water. Source tracking analysis revealed that 37% of all bacteria in the hatchery rearing water were introduced either by the live or dry feeds, or during water exchanges. The contribution of the microbiome from the algae was the largest, followed by that of the Artemia, the exchange water and the dry feeds. Our findings provide fundamental knowledge on the assembly processes and dynamics of rearing water microbiomes and illustrate the crucial role of these peripheral microbiomes in maintaining health-promoting rearing water microbiomes.
Asunto(s)
Alimentación Animal/microbiología , Artemia/microbiología , Bacterias/crecimiento & desarrollo , Bacterias/metabolismo , Penaeidae/microbiología , Animales , Acuicultura , Enfermedades de los Peces/epidemiología , Enfermedades de los Peces/microbiología , Enfermedades de los Peces/prevención & control , Microbiota , Agua , Microbiología del AguaRESUMEN
Microbial communities are essential for a healthy soil ecosystem. Metals and radionuclides can exert a persistent pressure on the soil microbial community. However, little is known on the effect of long-term co-contamination of metals and radionuclides on the microbial community structure and functionality. We investigated the impact of historical discharges of the phosphate and nuclear industry on the microbial community in the Grote Nete river basin in Belgium. Eight locations were sampled along a transect to the river edge and one location further in the field. Chemical analysis demonstrated a metal and radionuclide contamination gradient and revealed a distinct clustering of the locations based on all metadata. Moreover, a relation between the chemical parameters and the bacterial community structure was demonstrated. Although no difference in biomass was observed between locations, cultivation-dependent experiments showed that communities from contaminated locations survived better on singular metals than communities from control locations. Furthermore, nitrification, a key soil ecosystem process seemed affected in contaminated locations when combining metadata with microbial profiling. These results indicate that long-term metal and radionuclide pollution impacts the microbial community structure and functionality and provides important fundamental insights into microbial community dynamics in co-metal-radionuclide contaminated sites.
Asunto(s)
Metales Pesados , Microbiota , Contaminantes del Suelo , Radioisótopos , Suelo , Microbiología del Suelo , Contaminantes del Suelo/análisisRESUMEN
There is an urgent need for sustainable protein supply routes with low environmental footprint. Recently, the use of hydrogen oxidizing bacteria (HOB) as a platform for high quality microbial protein (MP) production has regained interest. This study aims to investigate the added value of using conditions such as salt and temperature to steer HOB communities to lower diversities, while maintaining a high protein content and a high quality amino acid profile. Pressure drop and hydrogen consumption were measured for 56 days to evaluate autotrophy of a total of six communities in serum flasks. Of the six communities, four were enriched under saline (0.0, 0.25, 0.5 and 1.0 mol NaCl l-1) and two under thermophilic conditions (65°C). Five communities enriched for HOB were subsequently cultivated in continuously stirred reactors under the same conditions to evaluate their potential as microbial protein producers. The protein percentages ranged from 41 to 80%. The highest protein content was obtained for the thermophilic enrichments. Amino acid profiles were comparable to protein sources commonly used for feed purposes. Members of the genus Achromobacter were found to dominate the saline enrichments while members of the genus Hydrogenibacillus were found to dominate the thermophilic enrichments. Here we show that enriching for HOB while steering the community toward low diversity and maintaining a high quality protein content can be successfully achieved, both in saline and thermophilic conditions.IMPORTANCE Alternative feed and food supply chains are required to decrease water and land use. HOB offer a promising substitute for traditional agricultural practice to produce microbial protein (MP) from residual materials and renewable energy. To safeguard product stability, the composition of the HOB community should be controlled. Defining strategies to maintain the stability of the communities is therefore key for optimization purposes. In this study, we use salt and temperature as independent conditions to stabilize the composition of the HOB communities. Based on the results presented, we conclude that HOB communities can be steered to have low diversity using the presented conditions while producing a desirable protein content with a valuable amino acid profile.
RESUMEN
The development of viability quantitative PCR (v-qPCR) has allowed for a more accurate assessment of the viability of a microbial sample by limiting the amplification of DNA from dead cells. Although valuable, v-qPCR is not infallible. One of the most limiting factors for accurate live/dead distinction is the length of the qPCR amplicon used. However, no consensus or guidelines exist for selecting and designing amplicon lengths for optimal results. In this study, a wide range of incrementally increasing amplicon lengths (68 to 906 base pairs [bp]) was used on live and killed cells of nine bacterial species treated with a viability dye (propidium monoazide [PMA]). Increasing amplicon lengths up to approximately 200 bp resulted in increasing quantification cycle (Cq) differences between live and killed cells while maintaining a good qPCR efficiency. Longer amplicon lengths, up to approximately 400 bp, further increased the Cq difference but at the cost of qPCR efficiency. Above 400 bp, no valuable increase in Cq differences was observed. IMPORTANCE Viability quantitative PCR (v-qPCR) has evolved into a valuable, mainstream technique for determining the number of viable microorganisms in samples by qPCR. Amplicon length is known to be positively correlated with the ability to distinguish between live and dead bacteria but is negatively correlated with qPCR efficiency. This trade-off is often not taken into account and might have an impact on the accuracy of v-qPCR data. Currently, there is no consensus on the optimal amplicon length. This paper provides methods to determine the optimal amplicon length and suggests an amplicon length range for optimal v-qPCR, taking into consideration the trade-off between qPCR efficiency and live/dead distinction.
Asunto(s)
Viabilidad Microbiana , Reacción en Cadena de la Polimerasa , ADN BacterianoRESUMEN
We performed a taxonomic and comparative genomics analysis of 67 novel Paraburkholderia isolates from forest soil. Phylogenetic analysis of the recA gene revealed that these isolates formed a coherent lineage within the genus Paraburkholderia that also included Paraburkholderiaaspalathi, Paraburkholderiamadseniana, Paraburkholderiasediminicola, Paraburkholderiacaffeinilytica, Paraburkholderiasolitsugae and Paraburkholderiaelongata and four unidentified soil isolates from earlier studies. A phylogenomic analysis, along with orthoANIu and digital DNA-DNA hybridization calculations revealed that they represented four different species including three novel species and P. aspalathi. Functional genome annotation of the strains revealed several pathways for aromatic compound degradation and the presence of mono- and dioxygenases involved in the degradation of the lignin-derived compounds ferulic acid and p-coumaric acid. This co-occurrence of multiple Paraburkholderia strains and species with the capacity to degrade aromatic compounds in pristine forest soil is likely caused by the abundant presence of aromatic compounds in decomposing plant litter and may highlight a diversity in micro-habitats or be indicative of synergistic relationships. We propose to classify the isolates representing novel species as Paraburkholderia domus with LMG 31832T (=CECT 30334) as the type strain, Paraburkholderia nemoris with LMG 31836T (=CECT 30335) as the type strain and Paraburkholderia haematera with LMG 31837T (=CECT 30336) as the type strain and provide an emended description of Paraburkholderia sediminicola Lim et al. 2008.
Asunto(s)
Burkholderiaceae/clasificación , Burkholderiaceae/genética , Hidrocarburos Aromáticos/metabolismo , Técnicas de Tipificación Bacteriana , Burkholderiaceae/aislamiento & purificación , Burkholderiaceae/metabolismo , Ácidos Cumáricos/metabolismo , Ácidos Cumáricos/farmacocinética , ADN Bacteriano/análisis , ADN Bacteriano/genética , Restauración y Remediación Ambiental/métodos , Bosques , Genoma Bacteriano , Hidrocarburos Aromáticos/farmacocinética , Filogenia , ARN Ribosómico 16S/genética , Rec A Recombinasas/análisis , Rec A Recombinasas/genética , Análisis de Secuencia de ADN , Microbiología del SueloRESUMEN
Investigating phenotypic heterogeneity can help to better understand and manage microbial communities. However, characterizing phenotypic heterogeneity remains a challenge, as there is no standardized analysis framework. Several optical tools are available, such as flow cytometry and Raman spectroscopy, which describe optical properties of the individual cell. In this work, we compare Raman spectroscopy and flow cytometry to study phenotypic heterogeneity in bacterial populations. The growth stages of three replicate Escherichia coli populations were characterized using both technologies. Our findings show that flow cytometry detects and quantifies shifts in phenotypic heterogeneity at the population level due to its high-throughput nature. Raman spectroscopy, on the other hand, offers a much higher resolution at the single-cell level (i.e., more biochemical information is recorded). Therefore, it can identify distinct phenotypic populations when coupled with analyses tailored toward single-cell data. In addition, it provides information about biomolecules that are present, which can be linked to cell functionality. We propose a computational workflow to distinguish between bacterial phenotypic populations using Raman spectroscopy and validated this approach with an external data set. We recommend using flow cytometry to quantify phenotypic heterogeneity at the population level, and Raman spectroscopy to perform a more in-depth analysis of heterogeneity at the single-cell level. © 2019 International Society for Advancement of Cytometry.
Asunto(s)
Bacterias , Espectrometría Raman , Escherichia coli/genética , Citometría de Flujo , Fenotipo , Análisis de la Célula IndividualRESUMEN
Strain LMG 30378T was isolated from a hydrogen-oxidizing bacteria enrichment reactor inoculated with forest soil. Phylogenetic analysis based on the 16S rRNA gene sequence indicated that this strain belonged to the genus Achromobacter. Multilocus sequence analysis combined with sequence analysis of a 765 bp nrd A gene fragment both showed Achromobacter agilis LMG 3411T and Achromobacter denitrificans LMG 1231T to be the closest-related neighbours to strain LMG 30378T. Genome sequence analysis revealed a draft genome of 6.81 Mb with a G+C content of 67.2 mol%. In silico DNA-DNA hybridization with A. denitrificans LMG 1231T and A. agilis LMG 3411T showed 42.7 and 42.5% similarity, respectively, confirming that strain LMG 30378T represented a novel Achromobacter species. Phenotypic and metabolic characterization revealed acid phosphatase activity and the absence of phosphoamidase activity as distinctive features. The draft genome composes all necessary metabolic components to fix carbon dioxide and to oxidize molecular hydrogen, suggesting that strain LMG 30378T is a key organism in the enrichment reactor. Together, these data demonstrate that strain LMG 30378T represents a novel species of the genus Achromobacter, for which the name Achromobacter veterisilvae sp. nov. is proposed. The type strain is LMG 30378T (=CCUG 71558T).
Asunto(s)
Achromobacter/clasificación , Reactores Biológicos/microbiología , Filogenia , Microbiología del Suelo , Achromobacter/aislamiento & purificación , Técnicas de Tipificación Bacteriana , Composición de Base , Bélgica , ADN Bacteriano/genética , Ácidos Grasos/química , Bosques , Hidrógeno , Tipificación de Secuencias Multilocus , Hibridación de Ácido Nucleico , ARN Ribosómico 16S/genética , Análisis de Secuencia de ADNRESUMEN
We investigated the gut microbiota of rabbit fish larvae at three locations in Vietnam (ThuanAn-northern, QuangNam-intermediate, BinhDinh-southern sampling site) over a three-year period. In the wild, the first food for rabbit fish larvae remains unknown, while the juveniles and adults are herbivores, forming schools near the coasts, lagoons, and river mouths, and feeding mainly on filamentous algae. This is the first study on the gut microbiota of the wild fish larvae and with a large number of individuals analyzed spatially and temporally. The Clostridiales order was the most predominant in the gut, and location-by-location alpha diversity showed significant differences in Chao-1, Hill number 1, and evenness. Analysis of beta diversity indicated that the location, not year, had an effect on the composition of the microbiota. In 2014, the gut microbiota of fish from QuangNam was different from that in BinhDinh; in 2015, the gut microbiota was different for all locations; and, in 2016, the gut microbiota in ThuanAn was different from that in the other locations. There was a time-dependent trend in the north-south axis for the gut microbiota, which is considered to be tentative awaiting larger datasets. We found limited variation in the gut microbiota geographically and in time and strong indications for a core microbiome. Five and fifteen OTUs were found in 100 and 99% of the individuals, respectively. This suggests that at this life stage the gut microbiota is under strong selection due to a combination of fish-microbe and microbe-microbe interactions.
Asunto(s)
Microbioma Gastrointestinal , Perciformes/microbiología , Migración Animal , Animales , Bacterias/genética , ARN Bacteriano/análisis , ARN Ribosómico 16S/análisis , Análisis de Secuencia de ARN , VietnamRESUMEN
For the production of edible microbial protein (MP), ammonia generated by the Haber-Bosch process or reclaimed ammonia from waste streams is typically considered as the nitrogen source. These processes for ammonia production are highly energy intensive. In this study, the potential for using nitrogen gas (N2) as a direct nitrogen source for MP production by hydrogen-oxidizing bacteria (HOB) was evaluated. The use of N2 versus ammonium as nitrogen source during the enrichment process resulted in differentiation of the bacterial community composition of the enrichments. A few previously unknown potential N2-fixing HOB taxa (i.e., representatives of the genus Azonexus and the family Comamonadaceae) dominated the enrichments. The biomass yield of a N2-fixing HOB enrichment was 30-50% lower than that of the ammonium-based HOB enrichment from the same inoculum source. The dried biomass of N2-fixing HOB had a high protein content (62.0 ± 6.3%) and an essential amino acid profile comparable to MP from ammonium-based HOB. MP from N2-fixing HOB could potentially be produced in situ without entailing the emissions caused by ammonia production and transportation by conventional means. It could be a promising substitute for N2-fixing protein-rich soybean because it has 70% higher protein content and double energy conversion efficiency from solar energy to biomass.