Effect of different power settings of Er,Cr:YSGG laser before or after tribosilicatization on the microshear bond strength between zirconia and two types of cements.

The aim of this study was to evaluate the effect of different output powers of Er,Cr:YSGG laser and the association with tribochemical silica coating on the bond strength between zirconia ceramic and two resin cements. One hundred ninety-two zirconia ceramic bars (IPS e-max ZirCAD Ivoclar Vivadent-) were sectioned (6 × 6 × 4 mm), sintered, and randomly divided into 12 groups for each cement system according to the surface treatment (n = 8): C-without treatment (control); R-tribochemical coating + resin cement (control); 2L-laser (2.0 W) + resin cement; 2LR-laser (2.0 W) + tribochemical coating + resin cement; R2L-tribochemical coating + laser (2.0 W) + resin cement; 2.5L-laser (2.5 W) + resin cement; 2.5LR-laser (2.5 W) + tribochemical coating + resin cement; R2.5L-tribochemical coating + laser (2.5 W) + resin cement; 3L-laser (3.0 W) + resin cement; 3LR-laser (3.0 W) + tribochemical coating + resin cement, R3L-tribochemical coating + laser (3.0 W) + resin cement; and RPHO-tribochemical + resin cement + photoactivation (control). After the surface treatment, the respective primers were applied, and resin cements, Multilink N, Ivoclar Vivadent (M), and Panavia F 2.0, Kuraray Medical Inc. (P), were inserted into Tygon molds which were bonded to the zirconia bars. Each specimen received two cements bars. After 24 h of storage in a relative humidity (100%) at 37 °C, they were evaluated by the microshear test speed of 1 mm/min. The microshear values were analyzed by one-way ANOVA and Tukey's test (α = 0.05). ANOVA showed statistically significant differences among the evaluated groups. The highest bond strength was observed in RPHO, which statistically differed from all groups. The lowest bond strength was observed in M2.5L (Multilink N) and in P3LR (Panavia F 2.0). It can be concluded that the lowest power output tested was suitable and showed bond strength values similar to tribochemical silica deposition. The light curing is important to adhesion and the tribosilicatizated surface achieves similar microshear values to untreated surface in absence of light.

Er:YAG Laser and Hemolasertherapy: Bone and Gingiva Gain-Case Report.

Background: Modern dentistry has increasingly valued conservative and biologically less invasive clinical practices, seeking to preserve the patients' tissues and natural dental elements. Most extractions in the dental clinic are preceded by periodontal disease that presents bone and gingival tissue loss, compromising the aesthetics as well as the support of dental elements. Objectives: The clinical approach in these cases often involves bone exertion followed by the successful installation of osseointegrated implants. Material and Methods: In this study, a case of extensive periodontal involvement and mobility of dental elements was carried out in a minimally invasive way, using the Er:YAG laser for periodontal decontamination and the hemolasertherapy technique to regenerate adjacent tissues, totaling nine weeks of treatment. Results: Clinical and radiographical improvement of tissue health and complete preservation of dental elements were observed. Conclusion: The patient underwent a follow-up appointment 2 years after the start of treatment when it was still possible to verify the stability of the clinical condition and the tissue gains obtained.

Effect of Photobiomodulation Combined with Physiotherapy on Functional Performance in Children with Myelomeningo-Cele-Randomized, Blind, Clinical Trial.

BACKGROUND: This study aimed to evaluate the electrical activity of the rectus femoris, tibialis anterior, and lateral gastrocnemius muscles during the sit-to-stand task and functional mobility after a neurofunctional physiotherapy protocol associated with PBM. METHODS: Twenty-five children were randomly allocated to either Active PBM + physiotherapy (n = 13) or PBM sham + physiotherapy (n = 12). PBM was carried out with a LED device (850 nm, 25 J, 50 s per point and 200 mW) at four points over the area with absence of a spiny process. Both groups completed a twelve-week supervised program with two weekly 45-60 min sessions. Pre-training and post-training assessments involved the Pediatric Evaluation of Disability Inventory (PEDI). Muscle activity was assessed using portable electromyography (BTS Engineering) and the electrodes were positioned on the lateral gastrocnemius, anterior tibialis, and rectus femoris muscles. The RMS data were recorded and analyzed. RESULTS: After 24 sessions of the treatment protocol, improvements were found in the PEDI score. The participants presented greater independence in performing the tasks, requiring less assistance from their caregivers. More significant electrical activity was found in the three muscles evaluated between the rest period and execution of the sit-to-stand tasks, both in the more compromised or less compromised lower limbs. CONCLUSION: Neurofunctional physiotherapy with or without PBM improved functional mobility and electrical muscle activity in children with myelomeningocele.

Effects of heating by steam autoclaving and Er:YAG laser etching on dentin components.

The simultaneous need for infection-control protocols in sample preparations and for safe laser irradiation parameters prompted this study about the effects of heat produced by both sample sterilization and laser etching on dentin components. The dentin was exposed on 30 bovine incisors, and then divided into two main groups: autoclaved (group A) or thymol treatment (group B). The surface of the dentin was schematically divided into four areas, with each one corresponding to a treatment subgroup. The specimens were either etched with phosphoric acid (control-CG) or irradiated with Er:YAG laser (subgroups: I-80 mJ, II-120 mJ, and III-180 mJ). Elemental distribution maps were done by energy-dispersive X-ray fluorescence (µ-EDXRF) on each treatment area. The dentin surface in depth was exposed and line-scan maps were performed. The B_CG treatment produced the best distribution of calcium (Ca) and phosphorus (P) content throughout the dentin surface. Er:YAG laser etching produced irregular patterns of elemental distribution in the dentin. Laser energies of 120 and 180 mJ produced the highest maximum calcium values. The Er:YAG laser energy of 180 mJ produced a localized increase in Ca and P content on the superficial layer of the dentin (∼ 0-0.10 mm). The autoclaving treatment of samples in experiments is not recommended since it produced damaging effects on dentin components. Er:YAG laser irradiation produced a heterogeneous Ca and P distribution throughout the dentin surface with areas of increased Ca concentration, and this may affect clinically the permeability, solubility, or adhesive characteristics of dental hard tissues with restorative procedures.

Photobiomodulation Therapy vs. Corticosteroid for the Management of Erosive/Ulcerative and Painful Oral Lichen Planus. Assessment of Success Rate during One-Year Follow-Up: A Retrospective Study.

Photobiomodulation (PBM) therapy is a promising approach for the management of inflammatory conditions and autoimmune lesions, such as oral lichen planus (OLP). The aim of this retrospective study was to assess the effectiveness of PBM in the management of painful and erosive/ulcerative OLP and to compare it with the standard of care that is the topical application of corticosteroids. 96 patients were included with erosive and painful OLP. 48 patients received PBM therapy and 48 received corticosteroids. Data was collected retrospectively on pain using the visual analogue scale; clinical aspects of lesions were assessed with the REU score, and the recurrence rate was noted. One session of PBM therapy with a helium-neon red light (635 nm) was carried out every 48 h for 6 weeks. Treatments were mainly made in contact mode, using a fiber with a diameter of 600 µm (0.6 mm). The output power of the laser beam was calibrated by a power meter. A delivered power of 0.1 W was used for 40 s in a continuous wave (CW), corresponding to a delivered energy of 4 J. The delivered energy density related to the fiber diameter was 1415 J/cm2. Each treated point was considered as 1 cm2 of diameter. PBM therapy within these parameters was carried out on each point until the totality of the lesion was covered, including the non-erosive OLP area. Furthermore, healthy mucosa within 5 mm of the lesion was also irradiated with the same conditions. This PBM treatment was performed during 6 consecutive weeks. The topical corticosteroid treatment consisted of cortisone application to cover the OLP 3 times/day for 6 weeks. Follow-up was made at 6 weeks and at 3, 6 and 12 months. After 6 weeks, both groups showed complete absence of pain, and a complete disappearance of ulcerative/erosive areas. No significant difference was found for both groups concerning the recurrence rate of erosive OLP during the follow-up period; values were 0% at 6 weeks for both groups and 79% and 87.5% for the corticosteroid and PBM group, respectively, at 12 months of follow-up. PBM is effective for managing OLP and is significantly similar to topical corticosteroids without any need for the use of medication and with no reported side effects.

Effect of Photobiomodulation in Lipopolysaccharide-Treated Myoblasts.

Objective: To evaluate the effect of photobiomodulation (PBM) on cell viability, synthesis of nitric oxide (NO), and interleukin (IL)-6 inflammatory cytokine production in myoblasts cultured in the presence of lipopolysaccharides (LPSs). Methods: C2C12 myoblasts were treated with LPS and PBM using different parameters (wavelength: 780 nm; beam spot: 0.04 cm2; power output: 10 or 40 mW; energy density: 5 or 20 J/cm2; and 20-sec exposure time). Nonirradiated cells were used to the control group. Results: An increase in cell viability was found in both LPS groups in comparison with the control. PBM with the higher power output (40 mW) induced a reduction in cell viability. PBM also modulated the synthesis of NO in the myoblasts, but did not alter the expression of IL-6. Conclusions: Based on these findings, PBM is capable of modulating the cell viability and the production of NO in LPS-treated myoblasts and it is, therefore, a possible tool for the treatment of muscle injury caused by infection.

Clinical evaluation of in-office tooth whitening with violet LED (405 nm): A double-blind randomized controlled clinical trial.

BACKGROUND: Although there is little evidence showing the effectiveness of violet LED on in-office tooth whitening, there are some studies which have reported satisfactory results. This double-blind randomized controlled clinical trial aimed to evaluate the effect of a violet light emission diode (LED) (405 nm) system, used in-office, on tooth whitening, sensitivity, use of medication after whitening and quality of life. METHODS: Eight patients were randomized into 4 groups (n = 20): G1 - violet LED, G2 - 35% carbamide peroxide (CP) and violet LED, G3 only CP 35% and G4 35% hydrogen peroxide (HP). The color was measured using a spectrophotometer at the following times: baseline, 15 and 180days. The colorimetric changes were analyzed using measurements from the CieLab System ΔE (ΔL, Δa and Δb) and the WID (Whiteness Index for Dentistry) for the 4 groups. Tooth sensitivity was recorded via a visual analog scale (VAS). Additionally, the Psychosocial Impact of Dental. Aesthetics Questionnaire (PIDAQ) was used to evaluate quality of life. RESULTS: For the analysis of ΔL, G4 and G2 presented more brightness than G1 and G3 (p<0.05), implying that G2 is at least as good as G4 (p>0.05). For measure of Δa, G4 presented better results, standing out from the other groups. (p<0.05). For Δb, both G4 and G2 showed a greater tendency for blue color than groups G1 and G3 (p <0.05). When analyzing ∆E at the 180-day follow up, G4 produced the highest ∆E, while G3 showed the lowest ∆E. The other 2 whitening groups produced intermediate ∆E values. For ∆W, G1 and G3 significantly differed from G2 and G3. When analyzing the 180-day follow up, G2 produced the highest ∆W, while G3 showed the lowest ∆W. The other two whitening treatments produced intermediate ∆W values. As for sensitivity, only G4 patients showed dental sensitivity within 24 h of the bleaching, with pain ceasing after 48 h. For G4, 33% of the patients needed to take analgesics within the first 24 h after the first 3 whitening sessions. For PIDAQ, there was no overall decrease in score over time for any of the groups and there was no difference between them (p>0.05). CONCLUSION: Our results showed that violet LED was not able to whiten teeth at the same intensity, when used alone, as it was when associated with 35% CP, contrary to our initial hypothesis. However, given that pain was not consistently reported in G2, one could suggest that treatment with LED + 35% CP is quite similar to that of 35% HP when used for tooth whitening, but with better pain outcomes. All treatments suggested an improvement in quality of life.Clinical Trial Registry: This trial is registered at ClinicalTrials.gov; the registration number is NCT03192852 https://clinicaltrials.gov/ct2/show/NCT03192852.

Clinical Evaluation of In-Office Dental Bleaching Using a Violet Light-Emitted Diode.

Objective: To clinically evaluate the effect of the violet light-emitted diode (LED) light (405-410 nm) associated to in-office dental bleaching with 35% carbamide peroxide, on tooth color change and sensitivity. Participant's satisfaction after treatment was also evaluated. Materials and methods: A total of 50 participants were selected and randomized into a treatment group (n = 25): G1-two bleaching sessions of 30 min each, with 7-day interval (D0 and D7); G2-two bleaching sessions (same protocol as G1) associated with violet LED light, 30 min each session. The color evaluation was performed before and after 7 days of the second session (D0 and D14); the medium third of buccal surface of canine and central incisor teeth were evaluated under VITA Shade Guide and spectrophotometry (subjective and objective). Tooth sensitivity was evaluated immediately after the treatment and after 48 h of each bleaching session (D0, D2, D7, and D9), and a self-perception questionnaire was applied on D14. Results: Data were subjected to nonparametric Mann-Whitney test and both canine and central incisor teeth presented color change. Group G2 showed significantly more change than G1. Fisher's exact test showed no statistically significant dental sensitivity differences between groups. Both groups reported a high level of satisfaction but chi-square test showed statistically higher satisfied patients with dental bleaching in G2 than G1. Conclusions: The violet LED light (405-410 nm) could improve dental bleaching effectiveness, without sensitivity increase.

Effects of Er:YAG laser irradiation and manipulation treatments on dentin components, part 2: energy-dispersive X-ray fluorescence spectrometry study.

The effects of laser etching, decontamination, and storage treatments on dentin components were studied by energy-dispersive X-ray fluorescence spectrometry (EDXRF). Thirty bovine incisors were prepared to expose the dentin surface and then divided into two main groups based upon the decontamination process and storage procedure: autoclaved (group A, n=15) or stored in aqueous thymol solution (group B, n=15). The surfaces of the dentin slices were schematically divided into four areas, with each one corresponding to a treatment subgroup. The specimens were either etched with phosphoric acid (control subgroup) or irradiated with erbium-doped yttrium-aluminum-garnet (Er:YAG) laser (subgroups: I-80 mJ, II-120 mJ, and III-180 mJ). Samples were analyzed by micro-EDXRF, yielding three spectra for each area (before and after treatment). Surface mappings covering an area of 80x60 points with steps of 20 mum were also performed on selected specimens. The amount of Ca and P in group A specimens decreased significantly (P<0.05) after the acid etching and the CaP ratio increased (P<0.001). Er:YAG laser-etching using lower laser energies did not produce significant changes in dentin components. The mapping data support the hypothesis that acid etching on dentin produced a more chemically homogeneous surface and thus a more favorable surface for the diffusion of adhesive monomers.

Cytokine mRNA expression is decreased in the subplantar muscle of rat paw subjected to carrageenan-induced inflammation after low-level laser therapy.

OBJECTIVE: The objective of this work was to investigate the anti-inflammatory effects of low-level laser therapy, applied at different wavelengths (660 and 684 nm), on cytokine mRNA expression after carrageenan-induced acute inflammation in rat paw. BACKGROUND DATA: Low-level laser therapy (LLLT) has been observed to reduce pain in inflammatory disorders. However, little is known about the mechanisms behind this effect or whether it is wavelength-specific. MATERIALS AND METHODS: The test sample consisted of 32 rats divided into four groups: A(1) (control-saline), A(2) (carrageenan-only), A(3) (carrageenan + 660 nm laser therapy), and A(4) (carrageenan + 684 nm laser therapy). The animals from groups A(3) and A(4) were irradiated 1 h after induction of inflammation by carrageenan injection. Continuous-wave red lasers with wavelengths of 660 and 684 nm and dose of 7.5 J/cm(2) were used. RESULTS: Both the 660 nm and 684 nm laser groups had 30%-40% lower mRNA expression for cytokines TNF-alpha, IL-1beta, and IL-6 in the paw muscle tissue than the carrageenan-only control group. Cytokine measurements were made 3 h after laser irradiation of the paw muscle, and all cytokine differences between the carrageenan-only control group and the LLLT groups were statistically significant (p < 0.001). CONCLUSIONS: LLLT at the 660-nm and 684-nm wavelengths administered to inflamed rat paw tissue at a dose of 7.5 J/cm(2) reduce cytokine mRNA expression levels within 3 h in the laser-irradiated tissue.

Photodynamic Therapy Associated with a Blue Dye Papain-Based Gel and Evaluation of Its Degradation of Type I Collagen Fibers.

OBJECTIVE: The aim of this in vitro study was to evaluate the degradation of type I collagen fibers after treatment with a papain-based gel associated with a blue dye (PapaMBlue™) for use in antimicrobial photodynamic therapy. MATERIALS AND METHODS: For such, 60 bioabsorbable membrane sponge discs were used. Group 1 was the negative control group. In groups 2, 3, and 4, the papain-based gel PapaMBlue gel was applied all over the samples for 4 min and irradiated using red laser (660 ± 10 nm) with 15, 30, and 40 J/cm2, respectively. In group 5, the papain-based gel was applied all over the samples for 4 min. In group 6, the photosensitizing dye was applied all over the samples for 4 min. The compositional analysis of the samples was performed using ATR-FTIR (attenuated total reflectance-Fourier transformed infrared spectroscopy). The data were statistically analyzed using ANOVA and Tukey's test (p < 0.05). RESULTS: Neither classic Papacarie™ nor the modified product with a photosensitizing agent (PapaMBlue) promoted collagen degradation. CONCLUSIONS: The irradiation of methylene blue added to papain gel with red light did not alter the chemical structure of type I collagen.

Evaluation of in-office tooth whitening treatment with violet LED: protocol for a randomised controlled clinical trial.

INTRODUCTION: In-office tooth whitening treatment using violet light emited diode (LED) (405 nm) is a novel bleaching method that causes less sensitivity while offering the same effectiveness as the gold standard (35% hydrogen peroxide, H2O2). This study describes a protocol for the first randomised controlled clinical trial to compare the effects of the two methods. METHODS AND ANALYSIS: Eighty patients will be divided into four groups: G1 violet LED; G2 violet LED +35% carbamide peroxide; G3 35% H2O2 and G4 violet LED +gingivoplasty. Colour will be measured at baseline, immediately after the first session and at the 15 and 180 days follow-up using the Vita Classical and the digital Easyshade V spectrophotometer (Vita, Zahnfabrik, Germany). Sensitivity after whitening will be measured using the Visual Analogue Scale at baseline and at each session in all groups and in all follow-ups. The tissue removed during gingivoplasty (G4) will be submitted to immunohistochemical analysis for the determination of inflammatory changes caused by violet LED. The Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) will be evaluated before, as well as at established time point controls. The results will be expressed as mean and SD values. After determining the normality of the data, a one-way repeated-measures analysis of variance will be used for the comparison of data with normal distribution and the Kruskal-Wallis test will be used for data with non-normal distribution. A p<0.05 will be considered indicative of statistical significance. After determining the normality of the data, the Kruskal-Wallis test will be used for non-parametric data. Multivariate analysis of variance (MANOVA) and the Wilcoxon test will be used for comparing data from the PIDAQ. ETHICS AND DISSEMINATION: This protocol has been approved by the Human Research Ethics Committee of UniversidadeNove de Julho (certificate: 2.034.518). The findings will be published in a peer-reviewed journal. TRIAL REGISTRATION NUMBER: NCT03192852; Pre-results.

Combined FT-Raman and SEM studies of the effects of Er:YAG laser irradiation on dentin.

OBJECTIVE: This study evaluated the molecular and morphological changes on dentin elements after Er:YAG laser irradiation. BACKGROUND DATA: Spectroscopy studies reporting the effects of Er:YAG laser irradiation as an alternative to acid etching are needed to better understand the laser's effects. METHODS: The occlusal one-third of the crown of six human third molars was removed. The dentin surface was schematically divided into areas corresponding to four surface treatment groups: control (group C): 37% phosphoric acid etching; group I: Er:YAG laser 80 mJ; group II: Er:YAG laser 120 mJ; and group III: Er:YAG laser 180 mJ. The analysis was performed by scanning electron microscopy (SEM) and Fourier transform Raman spectroscopy (FT-Raman) before and after the treatments. Raman data were submitted to ANOVA and Bonferroni tests. RESULTS: The SEM photomicrographs revealed open dentin tubules in the control group. The molars from groups I, II, and III showed partially open dentin tubules. SEM images showed that the laser-irradiated dentin surface was not favorable to the diffusion of monomers. A significant reduction of the spectra relative intensity was observed in group III specimens. CONCLUSIONS: Er:YAG laser irradiation with 180 mJ could produce chemical changes in proteins, phosphate, and carbonate in dentin.

Surface morphology of sound deciduous tooth enamel after application of a photo-absorbing cream and infrared low-level laser irradiation: an in vitro scanning electron microscopy study.

OBJECTIVES: The purpose of this descriptive scanning electron microscopic study was to characterize surface alterations in deciduous tooth enamel after in vitro infrared diode laser irradiation, using a photo-absorbing agent alone and also combined with fluoride, before and after laser irradiation. BACKGROUND DATA: Previous investigations have demonstrated increased enamel caries resistance after laser irradiation. METHODS: Seven extracted or exfoliated primary molar teeth underwent soft tissue débridement and fluoride-free prophylaxis. Buccal surfaces were determined to be caries free by macroscopic examination. Sample groups were divided into: (1) control (no treatment); (2) infrared diode laser irradiation (lambda = 810 nm, 68 nm, 60 mW/mm(2), 30 W) using the photo-absorbing agent alone (IRDL + PA; 500 J/cm(2)); and (3) infrared diode laser irradiation using a photo-absorbing agent combined with 2% fluoride (IRDL + PFA; 500 J/cm(2)). Buccal surfaces were evaluated following standard scanning electron microscopy preparation techniques. Control samples of enamel surfaces were relatively smooth but presented occasional enamel prism ends. There were no areas with cavitations or surface defects. RESULTS: After the IRDL + PA treatment, irradiated surfaces became rough and mildly to moderately irregular with scarce enamel cavitations and without exposure of enamel prism ends. The surfaces had adherent granules and only occasional fine cracks and porosities in surface coatings were noted. After the IRDL + PFA treatment, there was a homogenous confluent surface that masked typical enamel surface markings. The surfaces had well-defined globules resulting from the IRDL + PFA treatment, that were not seen after IRDL + PA treatment. CONCLUSIONS: Treatment of deciduous tooth enamel with infrared diode laser irradiation using a photo-absorbing agent and a photo-absorbing agent combined with 2% fluoride created surface coatings that may act as reservoirs for mineral phases during cariogenic activity on enamel, and also provide a certain degree of protection against cariogenic challenge.

Identification of calcifications in cardiac valves by near infrared Raman spectroscopy.

OBJECTIVE: The objective of this work was to detect calcification in cardiac valves using near infrared Raman spectroscopy (NIRS). A Ti:sapphire laser pumped by an argon-ion laser operating at a wavelength of 830 nm was used for excitation of the valve samples, and Raman emission was detected by an optical spectrometer with a liquid nitrogen-cooled CCD detector. BACKGROUND: Cardiac valves are subjected to highly repetitive mechanical stresses, due to their over 40 million cardiac cycles per year. These structures may suffer cumulative lesions, complicated by the deposition of calcium phosphate, which can lead to clinically significant diseases. NIRS can provide important information about biological tissue composition and has been used for diagnosis of some types of human pathology. METHODS: Samples of normal and pathologic tissues 5 mm in size were analyzed. RESULTS: It was observed that the Raman spectrum of calcified cardiac valves presented different behavior when compared with normal valves. Differences were observed at the intensity of 960, 1,260, 1,452, and 1,660 cm(1) peaks. CONCLUSIONS: These results suggest that this technique could be used to detect calcium phosphate mineral deposition in cardiac valves.

Use of near-infrared Raman spectroscopy for identification of atherosclerotic plaques in the carotid artery.

OBJECTIVES: The aim of this work was to identify the presence of atherosclerotic plaque in the human carotid artery using near infrared Raman spectroscopy. BACKGROUND DATA: Atherosclerosis is the most common and serious pathology of the cardiovascular system. Raman spectroscopy is an analytical tool that can be used to gather information about both the morphology and chemical composition of tissues. METHODS: A Ti:sapphire laser operating at the near-infrared wavelength of 830 nm pumped by an argon laser was used for excitation of the samples, and the Raman scattering was detected by an optical spectrometer with a liquid-nitrogen-cooled CCD detector. Carotid artery samples were classified into five groups: normal, intimal thickening, fatty plaque, fibrous-fatty plaque, and fibrous-calcified plaque. RESULTS: It was observed that the Raman spectrum of atheromatous plaque was different that that of normal tissue. The spectra of atheromatous plaques had bands due to the presence of cholesterol and its esters, with major bands at 1439 and 1663 cm(1), respectively. In normal tissues a peak related to C-H bending appears at 1451 cm(1). Calcified atheromatous plaques had primary bands at 961 and 1071 cm(1), which were due to the presence of phosphate and carbonate in the accumulated calcium. Peaks were seen at 1451 and 1655 cm(1) in the non-atherosclerotic tissue, which were shifted to 1439 and 1663 cm(1) in the atherosclerotic plaque. CONCLUSIONS: Our results indicate that this technique could be used to detect the presence of atherosclerotic plaques in carotid arterial tissue.

Bond Strength of Abraded and Non-Abraded Bleached Enamel to Resin After Er,Cr:YSGG Laser Irradiation.

OBJECTIVE: The objective of the study was to evaluate the microtensile bond strength (µTBS) of a composite resin to abraded or non-abraded bleached enamel after Er,Cr:YSGG laser irradiation and to observe the fracture patterns of the tested interfaces. MATERIALS AND METHODS: Two hundred twenty-eight bovine incisors were sectioned, resulting in 228 enamel blocks (7 × 4 × 4 mm3) that were divided into 12 groups (n = 19) according to the factors "adhesion" after bleaching (immediate adhesion; after 14 days; and a control group with adhesion on unbleached teeth); enamel "abrasion" (with or without abrasion simulating cavity preparation); and "laser" (with or without Er,Cr:YSGG laser irradiation). Bleached enamel groups were treated with 20% carbamide peroxide, 8 h/day for 21 days. Abrasion was performed with silicon carbide sandpaper. Specimens were restored with adhesive system and a composite resin (Adper Single Bond 2 and Z250; 3M ESPE). After 7 days, specimens were prepared by cutting into 1 mm beans to µTBS test performed in a universal testing machine. Fracture mode analysis was performed by using a stereoscopic loupe. The µTBS data were statistically analyzed by three-way analysis of variance with 95% confidence level and compared by running a Tukey post hoc test (α = 0.05). RESULTS: There was no statistically significant difference between triple interaction and double interactions among factors. There was no significant difference between the factors "adhesion," "abrasion," and "laser." Laser irradiation produced significantly lower bond strength values in irradiated groups compared with the non-irradiated ones. All groups had a high percentage of adhesive failures. CONCLUSIONS: Abrasion provided no benefit to bond strength of composite resins to bleached enamel. Er,Cr:YSGG (20 Hz, 0.5 W, 3.97 J/cm2) treatment reduced the bond strength of composite resins to enamel.

Analysis of Human Tooth Pulp Chamber Temperature After 670 nm Laser Irradiation: In Vitro Study.

OBJECTIVE: One of the limiting factors of employing laser radiation on dental therapies is the potential of causing thermal injuries to pulp tissues. The purpose of this study was to evaluate intra-chamber temperature increase on extracted human teeth exposed to 670 nm wavelength InGaAlP laser diode radiation. MATERIALS AND METHODS: In vitro intra-chamber temperature measurements of 12 standardized human teeth (incisors, canines, premolars, and molars; n = 3) were taken both before and after laser radiation. A type-K thermocouple fast-response thermocouple wire with a 0.5 mm diameter probe was inserted into the tooth pulp chamber (ICEL-Manaus-brand). The laser device Lasotronic-brand InGaAlP laser diode was used to irradiate tooth enamel, perpendicularly to the external surface for 30 sec, with power of levels of 340, 272, 204, 136, and 68 mW. The measurements were taken at three time points: 0, 30 sec, and 3 min after the laser irradiation. Measurements were repeated 24 h after removal and reinsertion of the probe in the pulp chamber. The temperature gradient (ΔT in °C) was calculated (ΔT = final temperature-initial temperature) for each group. Data of ΔT were statistically analyzed by two-way analysis of variance (ANOVA) at the 95% confidence level and compared by Tukey post hoc test (α = 0.05). RESULTS: ANOVA showed statistically significant differences to the interaction of factors (p < 0.05). The highest ΔT values obtained were observed to incisors with 340 mW, 272 mW; 204 mW of power (respectively 4.7°C, 4.2°C, and 3.1°C); and canines presented the lowest ΔT (0.8°C-0.3°C) with no influence of power output. CONCLUSIONS: Since the thermal increase was observed in this study, especially in incisors, attention should be paid to avoid pulpal damage.

Effect of Nd:YAG and CO2 Laser Irradiation on Prevention of Enamel Demineralization in Orthodontics: In Vitro Study.

OBJECTIVE: The aim of this study was to investigate Nd:YAG and CO2 laser effects in the prevention of demineralization in deeper layers of enamel via successive acid challenge cycles. BACKGROUND DATA: Lasers are promising in the prevention of enamel demineralization around the orthodontic brackets; however, there are very few studies that evaluate if the effects of treatment could be extended after successive acid challenge cycles due to permanent enamel structural alterations. MATERIALS AND METHODS: Human enamel samples were divided into five groups (n = 12): G1-application of 1.23% acidulated fluoride phosphate gel (AFP, control); G2-Nd:YAG laser irradiation (0.6 W, 84.9 J/cm2, 10 Hz, 110 µs, contact mode); G3-Nd:YAG laser irradiation associated with AFP; G4-CO2 laser irradiation (0.5 W, 28.6 J/cm2, 50 Hz, 5 µs, and 10 mm focal distance); and G5-CO2 laser irradiation associated with AFP. The samples were submitted to successive acid challenge cycles. Quantitative light-induced fluorescence and scanning electron microscopy were used to assess enamel demineralization. The data were statistically compared (α = 5%). RESULTS: G1: 50.87 ± 4.57; G2: 47.72 ± 2.87; G3: 50.96 ± 4.01; G4: 28.21 ± 2.19; and G5: 30.13 ± 6.38. The CO2 laser groups had significantly lower mineral losses than those observed in all other groups after successive acid challenge cycles. CONCLUSIONS: Only the CO2 laser (10.6 µm) irradiation prevents enamel demineralization around the orthodontic brackets even after exposure to successive acid challenges. The CO2 laser at 10.6 µm showed a deeper effect in enamel regarding caries prevention.

Evaluation of Temperature and Roughness Alteration of Diode Laser Irradiation of Zirconia and Titanium for Peri-Implantitis Treatment.

OBJECTIVE: This study investigated the effects of diode laser (gallium, aluminium, arsenide [GaAlAs]) irradiation with decontamination parameters on the temperature and roughness of yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP), titanium (TI), and sandblasted large grit acid-etched titanium (SLA). MATERIALS AND METHODS: Three groups (n = 10) of standardized disks with 5 mm diameter and 2 mm thickness were produced with Y-TZP obtained from computer-aided design and computer-aided manufacturing (CAD-CAM), machined TI and SLA. The diode laser single application (808 nm, 20 sec, 1 W, 50 Hz, t on = 100 ms, t off = 100 ms, energy density = 28.29 J/cm(2)) was performed in contact mode, on each disk. The temperature was measured by a thermosensor attached to a digital thermometer fixed to the opposite irradiated surface. The temperature gradient (ΔT) was calculated (ΔT = final temperature - initial temperature) for each group. The parameters Ra (in µm) and Sa (in µm(2)) were measured by white light confocal laser microscopy to express the surface roughness. Data of ΔT was statistically analyzed by one way ANOVA at the 95% confidence level and compared by Tukey post-hoc test (α = 0.05). Roughness data was analyzed by t test. RESULTS: The diode laser irradiation presented the following results (ΔT value): Y-TZP = 10.3°C(B); TI = 38.6°C(A), and SLA = 26.7°C(A). The ΔT values ((°)C) of the titanium groups were higher than for the Y-TZP group. For both roughness parameters (Ra and Sa), data did not show statistical significant differences to "irradiation" factor (p > 0.05) to Y-TZP and SLA. The Ra results (in µm) were: Y-TZP (control) = 0.73 (0.55); Y-TZP (irradiated) = 0.45 (0.27); SLA (control) = 0.74 (0.23); and SLA (irradiated) = 0.99 (0.33). The Sa results (in µm(2)) were: Y-TZP (control) = 1.39 (1.05); Y-TZP (irradiated) = 0.73 (0.41); SLA (control) = 0.85 (0.08); and SLA (irradiated) = 1.27 (0.44). CONCLUSIONS: Diode laser irradiation for peri-implantitis treatment increased both zirconia and TI temperature without surface roughness alterations.