Natural radioactivity and radon exhalation in building materials used in Italian dwellings.

Forty-two samples of building materials commonly used in Italian dwellings were surveyed for natural radioactivity. External (gamma), as defined and used by the European Commission, and internal (alpha) hazard indexes were calculated and radon specific exhalation rate and emanation fraction were measured. The accumulation method, by using the E-PERM electret ion chambers, was employed to determine specific exhalation rates of 222Rn. Several of the materials had hazard indexes that exceeded the European Commission limit values. However, it was evident that limit values for internal hazard indexes set based on Rn emanation should take into account the properties and use of the materials. For example, Rn emanation from basalt and glazed tiles was substantially lower than the Rn emanation from other materials with similar hazard indexes. Clearly there is need for improved guidelines and regulations in this area.

Health and environmental impacts of a fertilizer plant--Part I: assessment of radioactive pollution.

The aim of the first part of this investigation is to assess the radioactive pollution caused by a production plant of complex fertilizers (that is to say containing nitrogen, phosphorus and, in some cases, potassium). Firstly, the authors determine the concentrations of natural radioactivity present in raw materials, end products and wastes of the industrial plant. Then, they carry out an assessment of radioactive releases into the atmosphere, hydrosphere and lithosphere as well as of their significance from the environmental point of view. The second part of the investigation will be aimed at assessing the annual effective doses to plant workers and to members of the population surrounding the industrial site.

Health and environmental impacts of a fertilizer plant--Part II: assessment of radiation exposure.

In the previous paper the authors have studied the radioactive pollution caused by a complex fertilizers production plant. In this paper, the effective doses to the plant workers and to members of the population surrounding the industrial site are estimated. The authors have considered external irradiation, inhalation and ingestion of dust and inhalation of radon and radon daughters as the main occupational exposure routes. After estimating the single contributions, the total effective dose has been calculated as the sum of said contributions. Calculations have been differentiated according to the different tasks of the company employees. The estimated annual effective doses range from 0.6 to 1.4 mSv y(-1). Annual individual effective doses to local residents, resulting from internal and external irradiation caused by particulate matter emitted into the atmosphere by the plant have been estimated. The maximum individual dose rate is estimated to be about 4 microSv y(-1).

Assessment of the radiological impacts of a zircon sand processing plant.

The paper presents the results of a study on radiological impacts resulting from a zircon sand processing plant located in the North-Eastern part of Italy. Activity concentrations of radionuclides found in materials associated with this industrial process are presented as well as the results of the assessment of the annual effective doses to the workers and the members of the public. Gamma-spectrometric analyses were performed on "raw" sands, end-products, and soils sampled near the plant. Thermoluminescent dosimeters, electric pumps and electret ion chambers were used to measure the external irradiation, the indoor dust concentrations and the radon concentrations, respectively. The ground-level air concentration of radioactive particulate near the plant and the deposition of particulate matter were estimated by a Gaussian model (ISCLT3). Finally, the annual effective doses, calculated as provided for by Directive 96/29/Euratom, were estimated to be 1.7 mSv y(-1) for workers and 4.4 microSv y(-1) for members of the public.

Carbon and nitrogen distribution in the sediments of lagoon of Ravenna (Italy).

The distribution and the origin of carbon and nitrogen in sediments of an Italian lagoon--located north-east of Ravenna town--were investigated. From 1957 to 1976, the lagoon had been affected by a strong industrial pollution due to an important petrochemical complex. At present, industrial and domestic waste waters undergo a treatment process before being discharged into the lagoon. Sediment samples from 10 locations throughout the lagoon were analysed, in order to document the spatial and vertical distribution of C and N. Data show a very strong variability (organic carbon content varies between 8.9% and 0.14%) and the highest values were found in the immediate vicinity of the industrial discharge. Sediment organic matter shows allochthonous origin in proximity of industrial discharge and autochthonous origin in the remaining areas.

A new microbial assay for the toxicity detection of contaminated soils.

A comparative study to detect toxicity prior to bioremediation treatment was set in order to investigate dehydrogenase activity inhibition of a common soil bacterium caused by soil contaminated with Cu, Pb, and As. A spectrophotometric test with Pseudomonas fluorescens strain ATCC 13525 utilising the 2,3,5-triphenyl tetrazolium chloride (TTC) reduction by microbial dehydrogenase has been adapted for this purpose. Soil samples are incubated for 48 hours at 30 +/- 1 degrees C in 18-ml tubes in the presence of TTC as an artificial electron-acceptor. The reduced TTC forms a reddish colour substance named triphenyl formazan (TPF), which can be extracted from the microbial cells and measured colorimetrically. The rapid response of biological activity in microorganisms and the reported sensitivity to the toxicants in the contaminated samples are reflected by the TTC reduction method, which is a sensitive tool for toxicity screening of contaminated sites, routine monitoring of bioremediation processes, as well as for feasibility studies of bioremediation treatments, in order to assess whether a specific pollutant or any other substance at a site location could inhibit the microbiological processes.