Custom-made reverse shoulder arthroplasty for severe glenoid bone loss: review of the literature and our preliminary results.

The treatment of severe glenoid bone loss in shoulder arthroplasty represents a challenge, and the results of current prosthetic designs with only glenoid fixation still remain unsatisfactory. In the past decade, customized glenoid prostheses have been developed to address severe glenoid arthritis and in the revision setting. In this review, we analyzed the current surgical options, the classification limits, past literature evidence, and our preliminary results of 6 patients (3 male, 3 female) treated with a reverse implant and custom-made glenoid implant (ProMade; LimaCorporate, Italy). Computer analysis of the residual shape and the amount of glenoid bone stock in association with new classifications could help the surgeon to obtain good clinical and radiological outcomes. The development of navigation systems could improve the adequacy of the implant and, thus, the reliability and longevity of the implant itself.

Technology applications in shoulder replacement.

The advancement of technologies in orthopaedic surgery should provide the surgeon with precise and trustworthy support for pre-operative planning, intra-operative guidance and post-operative follow-up. The request for greater accuracy, predictable results and fewer complications, is the engine of digital evolution in pre-operative planning and computer-assisted surgery (CAS). It is an evolution rather than a revolution, and in the last few years these developments have begun to involve shoulder replacement surgery, too.

Distal biceps tendon rupture: advantages and drawbacks of the anatomical reinsertion with a modified double incision approach.

BACKGROUND: Distal biceps tendon rupture occurs more often in middle-aged male population, involving the dominant arm. In this retrospective study, it's been described the occurrence of the most frequent adverse events and the clinical outcomes of patients undergoing surgical repair of distal biceps tendon rupture with the modified Morrey's double-incision approach, to determine better indications for patients with acute tendon injury. METHODS: Sixty-three patients with acute distal biceps tendon rupture treated with a modified double-incision technique between 2003 and 2015 were retrospectively evaluated at a mean 24 months of follow-up. Clinical evaluation including range of motion (ROM) and isometric strength recovery compared to the healthy contralateral side assessment, together with documentation of nerve injury, was performed. Patients were asked to answer DASH, OES and MEPS scores. RESULTS: The ROM recovery showed excellent results compared to the healthy contralateral side. The reported major complications included: one case of proximal radio-ulnar synostosis, 3 cases of posterior interosseous nerve (PIN) palsy and one case of a-traumatic tendon re-rupture. Concerning minor complications, intermittent pain, ROM deficiency < 30° in flexion/extension and pronation/supination, isometric flexion strength deficiency < 30% and isometric supination strength deficiency < 60%, lateral antebrachial cutaneous nerve (LACBN) injury, were observed. The average DASH score was 8.5; the average OES was 41.5 and the MEPS was 96.3. CONCLUSION: The Morrey modified double-incision technique finds its indication in young and active patients if performed within 2 weeks from injury. If performed by experienced surgeons, the advantages can exceed the drawbacks of possible complications.

Assessment of patient-specific instrumentation precision through bone resection measurements.

PURPOSE: In the present study, the precision of two patient-specific instrumentation (PSI) systems for total knee arthroplasty (TKA) was evaluated by comparing bony resection thicknesses of the pre-operative PSI planning and intra-operative measurements by a vernier calliper. It was hypothesized that the data provided by pre-operative planning were accurate within ±2 mm of the bone resection thickness measured intra-operatively. METHODS: Forty-one patient-specific TKAs were examined: 25 performed with Visionaire® technology and 16 with OtisMed® system. PSI accuracy was analysed comparing the resected bone thicknesses in the femoral and tibial cuts with pre-operatively planned resections. To determine pre-operative planning precision, the thickness values reported by the PSI planning were subtracted from the values reported intra-operatively by the calliper. RESULTS: The mean absolute differences between pre-operatively planned resections and corresponding intra-operative thickness measurements ranged from a minimum of 2.6 mm (SD 0.8) to a maximum of 3.6 mm (SD 1.3) in all three anatomical planes in both groups. In every plane, the mean absolute discrepancies between planned resections and measured cuts differed significantly from zero (p < 0.0001). The proportion of differences within ±2 mm between intra-operative measured resections and planned PSI cuts occurred in more than 90 % of the cohort for femoral distal resections. Less precision was reported for the femoral posterior medial cuts (70.7 % within ±2 mm) and the tibial cuts (70.7 % on the medial, 75.6 % on the lateral side). Prosthetic component alignment on the coronal and transverse planes resulted in considerable deviations from the pre-operative planning. CONCLUSION: The two examined PSI technologies were accurate in femoral distal cuts, determining acceptable femoral component placement on the coronal plane. Posterior femoral and tibial cuts were less precise. Deviations from the pre-operative resection planning were reported in every plane. Inaccuracy was explained by ambiguous custom-made jigs placement on the bony surface. LEVEL OF EVIDENCE: III.

Surgeon's experience influences UKA survivorship: a comparative study between all-poly and metal back designs.

PURPOSE: Concerns exist regarding prosthetic positioning and post-operative limb alignment in unicompartmental knee arthroplasty (UKA). In this study, we hypothesized deviations of the post-op anatomical femoro-tibial angle (aFTA) and the tibial component alignment to be factors influencing UKA survivorship. Moreover, by a comparison between all-poly and metal back UKAs, we hypothesized that prosthetic design plays a role in implant survivorship. METHODS: One hundred ninety-five medial UKAs were performed on 176 patients by two experienced surgeons and one low-UKA user. One hundred and forty-seven UKAs were included in the study: 72 all-poly and 75 metal back. Measurements were performed on radiographs: mechanical femoro-tibial angle, Cartier angle, aFTA and tibial posterior slope (PS) on pre-op radiographs; femoral and tibial component varus/valgus, aFTA and tibial component PS on post-op radiographs. RESULTS: At an average follow-up of 61 months (min. 30, max. 107), 147 UKAs were evaluated: The reported survivorship rate was 93.1 %. Eleven implants underwent revision: ten all-poly and one metal back. No differences were reported between the two groups in the radiographic measurements. Significant radiographic differences were reported between revised and not revised UKAs: Revised UKAs were associated with overcorrection of the pre-op Cartier angle and under correction of pre-op aFTA. Most of revised UKAs were performed by the low-volume UKA surgeon. CONCLUSIONS: Surgeon's experience is essential to achieve good results in UKA: Preserving the tibial epiphyseal axis and avoiding excessive or insufficient corrections of the pre-operative limb alignment are predictor of successful replacement, while prosthetic designs, models and fixation geometry do not affect UKA outcome. LEVEL OF EVIDENCE: IV.

How to improve femoral component rotational alignment in computer-assisted TKA.

PURPOSE: Although several anatomical landmarks have been proposed to obtain adequate femoral component alignment in total knee arthroplasty (TKA), there is still no consensus regarding the best way to correctly position the prosthetic component on the horizontal plane. A previous computed tomography (CT)-based study has demonstrated anatomical transepicondylar axis (aTEA) to be externally rotated relative to surgical transepicondylar axis (sTEA) of approximately 4.5°. In this study, it is described a new methodological approach to femoral component rotational positioning through the use of previously reported CT scan information and navigation. METHODS: Eight consecutive patients scheduled for navigated TKA were selected. Rotational placement of the femoral component was performed using navigation system. The femoral component was implanted setting 4.5° of internal rotation relative to the aTEA. Within 1 week from surgery, all patients underwent a CT scan, and the posterior condylar angle (PCA) was measured. A PCA of 0.0°, meaning component placement parallel to sTEA, was set as femoral rotational alignment target. Clinical evaluation was performed at a mean 14.3 months of follow-up with KOOS questionnaire. RESULTS: The mean PCA measured on post-operative CT images was 0.4° (SD 1.3°), meaning that the femoral component was averagely implanted with 0.4° of internal rotation relative to the sTEA. Seven out of eight cases (87.5 %) resulted to have within 1° deviation from the rotational alignment target. All patients but one reported good clinical results. CONCLUSIONS: Relevant finding of the present study was that the use of navigation and aTEA as a reference demonstrated to be accurate to set up femoral component rotational positioning on the horizontal plane in TKA. Further study should be performed to confirm this conclusion.

Coronal alignment is a predictor of the rotational geometry of the distal femur in the osteo-arthritic knee.

PURPOSE: There is a lot of inter-individual variation in the rotational anatomy of the distal femur. This study was set up to define the rotational anatomy of the distal femur in the osteo-arthritic knee and to investigate its relationship with the overall coronal alignment and gender. METHODS: CT-scans of 231 patients with end-stage knee osteo-arthritis prior to TKA surgery were obtained. This represents the biggest series published on rational geometry of the distal femur in literature so far. RESULTS: The posterior condylar line (PCL) was on average 1.6° (SD 1.9) internally rotated relative to the surgical transepicondylar axis (sTEA). The perpendicular to trochlear anteroposterior axis (⊥TRAx) was on average 4.8° (SD 3.3°) externally rotated relative to the sTEA. The relationship between the PCL and the sTEA was statistically different in the different coronal alignment groups (p < 0.001): 1.0° (SD 1.8°) in varus knees, 2.1° (SD 1.8°) in neutral knees and 2.6° (SD 1.8°) in valgus knees. The same was true for the ⊥TRAx in these 3 groups (p < 0.02).There was a clear linear relationship between the overall coronal alignment and the rotational geometry of the distal femur. For every 1° in coronal alignment increment from varus to valgus, there is a 0.1° increment in posterior condylar angle (PCL vs sTEA). CONCLUSION: The PCL was on average 1.6° internally rotated relative to the sTEA in the osteo-arthritic knee. The relationship between the PCL and the sTEA was statistically different in the different coronal alignment groups. LEVEL OF EVIDENCE: III.

Joint line is well restored when navigation surgery is performed for total knee arthroplasty.

PURPOSE: The incorrect restoration of the joint line during TKA can result in joint instability, anterior knee pain, limited range of motion, and joint stiffness. The joint line level is usually measured only on pre- and post-operative radiographs. Current knee navigation systems can now potentially support intra-operatively joint line restoration by controlling the exact amount of the bone-cartilage removed and the corresponding overall thickness of the components implanted. The aim of this study was to assess how well the joint line level is restored and the tibiofemoral overstuffing prevented when standard knee surgical navigation is used carefully also with these purposes. Intra-operative measurements during navigated TKA were taken. METHODS: Sixty-seven primary TKAs were followed prospectively. The variation before and after prosthesis component implantation of the joint line level, both in the femoral and tibial reference, was measured intra-operatively by an instrumented probe. Overstuffing was measured as the difference between the overall craniocaudal thickness of the femoral and tibial prosthesis components inserted and the thickness of the bone-cartilage removed. RESULTS: A significant elevation in the joint line level after prosthesis implantation was found with respect to the tibial reference (1.9 ± 2.4 mm, mean ± SD), very little to the femoral reference (0.3 ± 2.1 mm), perhaps accounted for the femur-first operative technique utilized. Overstuffing was on the average of 2.2 ± 3.0 mm. CONCLUSIONS: These results suggest that a knee navigation system can also support well a proper restoration of the joint line level and limit the risk of overstuffing when relevant measurements are taken carefully during operation. LEVEL OF EVIDENCE: III.

Can Patellar Tendon Angle reveal sagittal kinematics in total knee arthroplasty?

The Patellar Tendon Angle is strongly correlated with both patello-femoral and tibio-femoral joint kinematics. Thus, the Patellar Tendon Angle might be regarded as a concise indicator of the antero-posterior translation of the femur with respect to the tibia. Twelve subjects, who had undergone total knee arthroplasty, were investigated by video-fluoroscopy during step-up/down. The kinematics at the replaced knee was reconstructed by means of 3D fluoroscopy. The Patellar Tendon Angle and the knee-flexion angle were measured on sagittal fluoroscopic images with software designed for the purpose. The slope of the linear trend of the Patellar Tendon Angle versus knee-flexion angle relationship correlated significantly with the mean (p = 0.001), most anterior (p = 0.001), and most posterior (p = 0.016) position reached by the femur over the tibia. The Patellar Tendon Angle versus knee-flexion angle relationship provides relevant information about the anterior or posterior positioning of the femur over the tibia, but it cannot be interpreted as quantification of the actual antero-posterior translation of the femur over the tibia.

Does component placement affect short-term clinical outcome in robotic-arm assisted unicompartmental knee arthroplasty?

AIMS: The purpose of this multicentre observational study was to investigate the association between intraoperative component positioning and soft-tissue balancing on short-term clinical outcomes in patients undergoing robotic-arm assisted unicompartmental knee arthroplasty (UKA). PATIENTS AND METHODS: Between 2013 and 2016, 363 patients (395 knees) underwent robotic-arm assisted UKAs at two centres. Pre- and postoperatively, patients were administered Knee Injury and Osteoarthritis Score (KOOS) and Forgotten Joint Score-12 (FJS-12). Results were stratified as "good" and "bad" if KOOS/FJS-12 were more than or equal to 80. Intraoperative, post-implantation robotic data relative to CT-based components placement were collected and classified. Postoperative complications were recorded. RESULTS: Following exclusions and losses to follow-up, 334 medial robotic-arm assisted UKAs were assessed at a mean follow-up of 30.0 months (8.0 to 54.9). None of the measured parameters were associated with overall KOOS outcome. Correlations were described between specific KOOS subscales and intraoperative, post-implantation robotic data, and between FJS-12 and femoral component sagittal alignment. Three UKAs were revised, resulting in 99.0% survival at two years (95% confidence interval (CI) 97.9 to 100.0). CONCLUSION: Although little correlation was found between intraoperative robotic data and overall clinical outcome, surgeons should consider information regarding 3D component placement and soft-tissue balancing to improve patient satisfaction. Reproducible and precise placement of components has been confirmed as essential for satisfactory clinical outcome. Cite this article: Bone Joint J 2019;101-B:435-442.

Mason type III radial head fractures treated by anatomic radial head arthroplasty: Is this a safe treatment option?

BACKGROUND: Radial head fractures make up approximately 3% of all fractures and they are the most common elbow fracture in adults. Replacement through arthroplasty is the recommended treatment in the context of unstable elbow injury and comminuted radial head fracture. The midterm clinical, functional, and radiographic results in patients treated with anatomic radial head arthroplasty for a Mason type III radial head fracture are presented. MATERIAL AND METHODS: We performed a retrospective search of our facility's prospective trauma database to identify all skeletally mature patients who were treated by primary radial head replacement or open reduction and internal fixation following an acute radial head fracture. Inclusion criteria were Mason type III fractures and anatomic radial head arthroplasty (RHA). All the patients included were evaluated using a standard postoperative protocol including clinical and radiographic evaluation at 1, 3 and 12 months of follow-up. All the patients were reviewed clinically at an average of 30 months' follow-up. RESULTS: Forty-one subjects (32 Mason type III and 9 Mason IV fractures) were treated with anatomic RHA (Acumed, Hillsboro, OR, USA). Of these, two patients (1 Mason type III and 1 Mason type IV) were excluded from the analysis because severe cognitive impairment. Moreover, we decided to exclude the subjects with a Mason type IV fracture to obtain a more homogeneous sample. Therefore, 31 patients with a Mason type III fracture were included in this study. Based on the Mayo Elbow Performance Score, excellent results were obtained in 24 (77%) patients, good in 3 (10%) and fair in 4 (13%) patients. Heterotopic ossification was reported in 8 patients (26% of cases). The final elbow flexion-extension range of motion was of 112°, with a mean flexion of 125°. The final forearm rotational range of motion was 134° with a mean pronation of 68° and a mean supination of 66°. DISCUSSION: Anatomic radial head replacement leads to a good functional recovery, even in the presence of severe instability, such as coronoid fractures and LUCL injury. However, patients should be informed of the high number of adverse events (mainly heterotopic ossification) following this treatment. LEVEL OF EVIDENCE: Therapeutic IV.

Humeral shaft non-union after intramedullary nailing.

BACKGROUND: The humerus shaft is one of the sites with the largest probability of developing pseudoarthrosis after fracture. We present the results of nine patients with atrophic pseudoarthrosis of humeral shaft treated with angular stability plate associated with allograft and platelet-rich plasma (PRP), after a first treatment with intramedullary nail to correct the fracture. MATERIAL AND METHODS: From January 2012 to December 2014, nine patients were treated for atrophic pseudoarthrosis (PSA) of humeral shaft treated previously using intramedullary nail; seven humeral diaphysis fractures were located in the middle-proximal third and two in the middle third. In one case, a reverse shoulder prosthesis implant was associated to treat a co-existent rotator cuff massive lesion. The mean time between injury and treatment of non-union was 32 weeks (min 16-max 180); all patients were evaluated with Constant, DASH and UCLA score. RESULTS: At the final follow-up (23.7 months), the mean Dash score was 22.25 pt, the Constant score was 64 pt, and the UCLA score value was 27 pt. The average pain value was 2 for the arm interested and 0 into PSA focus. Radiographic healing was obtained at 7 months. CONCLUSIONS: The humeral shaft non-union is an invalidating problem which affects the daily living. Our treatment with plate, cortical bone graft, and PRP can build a high-stability structure that can help healing and graft integration.

Influence of tibial component posterior slope on in vivo knee kinematics in fixed-bearing total knee arthroplasty.

The relation between prosthesis component kinematics and posterior slope of the tibial component in total knee arthroplasty is much debated. Three-dimensional kinematics of the replaced knee was obtained by video fluoroscopy in 23 knees treated by cruciate-retaining or cruciate-substituting arthroplasty. Relative position and orientation of the metal components were calculated in stair ascending, getting up from and sitting down on a chair, and single step up-and-down. Significant correlations were found between tibial component posterior slope and anteroposterior position of tibiofemoral lateral contact and between this slope and maximum knee flexion. These correlations were task and design specific. However, the average of the tibiofemoral contact positions over all three motor tasks was slightly posterior to the midline of the tibial base plate, reaching at most 84% of its anteroposterior dimension. Performing a posterior slope of the tibial cut does not put total knee arthroplasty with high conforming designs at higher risk of failure, even when large posterior inclinations need to be achieved.

Wear patterns on tibial plateau from varus osteoarthritic knees.

BACKGROUND: The knowledge of cartilage wear patterns at the medial tibial plateau is important to understand the main causes of arthritis in varus knees. The most important factors influencing knee arthritis in fact seem to be the severity of the degenerative changes determined by the lower limb mechanical axis and the abnormal knee joint kinematics which frequently results from dysfunction of the anterior cruciate ligament. METHODS: We studied the wear patterns of cartilage damage in 70 medial tibial plateaus resected at operation during total knee arthroplasty indicated for varus osteoarthritic knee. Anterior cruciate ligament and medial meniscus integrity was assessed intra-operatively. Calibrated digital images were used to measure the wear patterns with a standard software tool. The medial compartment of the tibial plateau was divided into six zones, and the amount of cartilage and bone destruction in each zone was classified into two grades. FINDINGS: The wear pattern was found to be highly dependent upon knee varus deformity (Mann Whitney P<0.001) and anterior cruciate ligament integrity (Friedman P<0.0005). Anterior cruciate ligament was found intact in 35.7% of the cases. Wear patterns on intact anterior cruciate ligament knees occurred in the central to medial aspect of the tibial plateau. Anterior cruciate ligament deficient knees had significantly larger wear patterns anteriorly and posteriorly in the most medial region of the medial plateau. INTERPRETATION: These observations suggest altered joint mechanics exist in anterior cruciate ligament deficient varus knees, which would worsen cartilage degeneration and osteoarthritis progression.

A new software tool for 3D motion analyses of the musculo-skeletal system.

BACKGROUND: Many clinical and biomechanical research studies, particularly in orthopaedics, nowadays involve forms of movement analysis. Gait analysis, video-fluoroscopy of joint replacement, pre-operative planning, surgical navigation, and standard radiostereometry would require tools for easy access to three-dimensional graphical representations of rigid segment motion. Relevant data from this variety of sources need to be organised in structured forms. Registration, integration, and synchronisation of segment position data are additional necessities. With this aim, the present work exploits the features of a software tool recently developed within a EU-funded project ('Multimod') in a series of different research studies. METHODS: Standard and advanced gait analysis on a normal subject, in vivo fluoroscopy-based three-dimensional motion of a replaced knee joint, patellar and ligament tracking on a knee specimen by a surgical navigation system, stem-to-femur migration pattern on a patient operated on total hip replacement, were analysed with standard techniques and all represented by this innovative software tool. Segment pose data were eventually obtained from these different techniques, and were successfully imported and organised in a hierarchical tree within the tool. FINDINGS: Skeletal bony segments, prosthesis component models and ligament links were registered successfully to corresponding marker position data for effective three-dimensional animations. These were shown in various combinations, in different views, from different perspectives, according to possible specific research interests. INTERPRETATION: Bioengineering and medical professionals would be much facilitated in the interpretation of the motion analysis measurements necessary in their research fields, and would benefit therefore from this software tool.

Dislocation of central venous catheters in paediatric patients.

Children have limited venous access possibilities; therefore, when long-term therapy is necessary, it is better to place a catheter in a central vein. The Port catheter, totally implanted, is less exposed to the risk of infection and permits a normal life. However, there is the possibility of the displacement or fragmentation of the catheter that can be diagnosed initially only by clinical symptoms and later by a chest X-ray. We report a case of disconnection between the Port catheter and the reservoir resulting in catheter migration to the left pulmonary artery.

Double-locking precontoured plating system for malunited fractures of the distal end of humerus.

BACKGROUND: Distal humeral malunions are uncommon injuries, often associated with limited elbow motion, pain, instability, weakness, and sometimes ulnar neuritis. The complex anatomy of the elbow joint makes this condition one of the most complex elbow injuries to treat. MATERIALS AND METHODS: Four patients were treated by the same surgeon between 2011 and 2013 using a double-locking precontoured plating system for malunited intra-articular or extra-articular fractures of the distal end of the humerus. RESULTS: At a mean 3 years of follow-up, a significant improvement in the elbow motion and functional outcome, evaluated with the Mayo Elbow Performance Index and the Disability of the Arm, Shoulder, and Hand, were observed. Articular reduction obtained after the surgery was maintained in all patients without evidence of avascular necrosis. No other complications (i.e., infection, nervous iatrogenic lesions) were reported. CONCLUSIONS: Corrective osteotomy using double-locking precontoured plating system preceded by preoperative planning using a CT scan allowed an improvement in the functional outcome and elbow motion, without complications.

Advanced multimodal visualisation of clinical gait and fluoroscopy analyses in the assessment of total knee replacement.

Traditional gait and fluoroscopy analysis of human movement are largely utilised but are still limited in registration, integration, synchronisation and visualisation capabilities. The present work exploits the features of a recently developed software tool based on multimodal display (Data Manager developed within the EU-funded project 'Multimod') in an exemplary clinical case. Standard lower limb gait analysis, comprising segment position, ground reaction force and EMG data collection, and three-dimensional fluoroscopy analysis at the replaced joint were performed in a total knee replacement patient while ascending stairs. Clinical information such as X-rays and standard scores were also available. Data Manager was able to import all this variety of data and to structure these in an original hierarchical tree. Bone and prosthesis component models were registered to corresponding marker position data for effective three-dimensional animations. These were also synchronised with corresponding standard video sequences. Animations, video, time-histories of collected and also processed data were shown in various combinations, according to specific interests of the bioengineering and medical professionals expected to observe and to interpret this large amount of data. This software tool demonstrated to be a valuable means to enhance representation and interpretation of measurements coming from human motion analysis. In a single software, a thorough and effective clinical and biomechanical analysis of human motion was performed.

Complex proximal humerus fractures: Hertel's criteria reliability to predict head necrosis.

BACKGROUND: The risk of post-traumatic humeral head avascular necrosis (AVN), regardless of the treatment, has a high reported incidence. In 2004, Hertel et al. stated that the most relevant predictors of ischemia after intracapsular fracture treated with osteosynthesis are the calcar length, medial hinge integrity and some specific fracture types. Based on Hertel's model, the purpose of this study is to evaluate both its reliability and weaknesses in our series of 267 fractures, assessing how the anatomical configuration of fracture, the quality of reduction and its maintenance were predictive of osteonecrosis development, and so to suggest a treatment choice algorithm. MATERIALS AND METHODS: A retrospective study, level of evidence IV, was conducted to duly assess the radiographic features of 267 fractures treated from 2004 to 2010 following Hertel's criteria treated with open reduction and internal fixation by angular stability plates and screws. The average age was 65.2 years. The average follow-up was 28.3 ± 17.0 months. The percentage of AVN, the quality and maintenance of reduction obtained during surgery were evaluated. RESULTS: The AVN incidence was 3.7 %. No significant correlation with gender, age and fracture type was found. At the last follow-up X-ray, only 30 % presented all Hertel's good predictors in the AVN group, 4.7 % in the non-AVN group (p < 0.05). About quality of reduction in the AVN group, it was poor in 50 %; while in the non-AVN group, it was poor in 3.4 % (p < 0.05). Four patients with AVN were symptomatic, and three needed a second surgery. CONCLUSIONS: Hertel's criteria are important in the surgical planning, but they are not sufficient: an accurate evaluation of the calcar area fracture in three planes is required. All fractures involving calcar area should be studied with CT.

Shear fractures of the distal humerus: Is the use of intra-articular screws a safe treatment?

BACKGROUND: Coronal shear fractures of the distal humerus are uncommon injuries and are not exempt from complications. The aim of this research is to evaluate the possible advantages and drawbacks using cannulated compression headless screws. MATERIALS AND METHODS: We performed a prospective study including all the consecutive patients who were treated with cannulated screws for coronal shear fractures of the distal humerus between 2010 and 2013. Following the Dubberley's classification, three patients were type 1A, one patient was 1B, three patients were 2B, and one patient was 3B. The mean follow-up was 30 months. The clinical and radiological evaluation included analysis of passive range of motion, functional outcome, radiological evaluation of fracture healing and reduction maintenance, and the occurrence of possible adverse events. RESULTS: All fractures healed, and radiographic union was observed at an average of 3 months. The average elbow range of motion was 125°, with 125° of flexion and 20 of extension. According to the Broberg and Morrey score, there were four excellent and four good results. Using the Mayo Elbow Performance Index, five cases achieved excellent scores and three reported good results. Adverse events reported in three cases were as follows: heterotopic ossification, complex regional pain syndrome and delayed lateral collateral ligament disruption. CONCLUSIONS: The use of cannulated compression headless screws has given satisfactory results, allowing a strong inter-fragmentary compression, early mobilization, with high union rates and good elbow function. However, patients should be counseled about the high proportion of adverse events following these injuries.