In vitro and in vivo evaluation of silicated hydroxyapatite and impact of insulin adsorption.

This study evaluates the biological behaviour, in vitro and in vivo, of silicated hydroxyapatite with and without insulin adsorbed on the material surface. Insulin was successfully adsorbed on hydroxyapatite and silicated hydroxyapatite bioceramics. The modification of the protein secondary structure after the adsorption was investigated by means of infrared and circular dichroism spectroscopic methods. Both results were in agreement and indicated that the adsorption process was likely to change the secondary structure of the insulin from a majority of α-helix to a ß-sheet form. The biocompatibility of both materials, with and without adsorbed insulin on their surface, was demonstrated in vitro by indirect and direct assays. A good viability of the cells was found and no proliferation effect was observed regardless of the material composition and of the presence or absence of insulin. Dense granules of each material were implanted subcutaneously in mice for 1, 3 and 9 weeks. At 9 weeks of implantation, a higher inflammatory response was observed for silicated hydroxyapatite than for pure hydroxyapatite but no significant effect of adsorbed insulin was detected. Though the presence of silicon in hydroxyapatite did not improve the biological behaviour, the silicon substituted hydroxyapatite remained highly viable.

The extent and variability of effects of culture conditions on the secretion of human chorionic gonadotrophin and interleukin-6 by human, term placental explants in culture.

Culture of explants derived from third trimester human placenta is used in a range of contexts as an experimental model that retains tissue architecture. This study aimed to explore the variability between, and within, individuals of secretion by explants of human chorionic gonadotrophin (hCG) and interleukin-6 (IL-6). Standard culture medium contained hydrocortisone, insulin, retinoic acid and serum. Under these conditions explants displayed significant differences in the time-course and extent of hCG secretion. Peak hCG secretion varied between 1.19 and 242 mIU/mg protein/h (coefficient of variation (CV) = 111%) and could occur between days 4 and 7 of culture. hCG secretion was more variable if explant protein was < 400 microg. Unadjusted day 7 hCG secretion showed marked variation: intra-placental CV = 15%, inter-placental CV = 86%. When day 7 hCG secretion was standardised by day 6 secretion, intra-placental CV was 6.9%, inter-placental CV was 4.0%. When this standardisation was applied, hCG secretion during day 7 of culture was not affected by removal of hydrocortisone, insulin or serum from the medium or by the addition of tumour necrosis factor-alpha (TNF-alpha). The secretion of IL-6 during day 7 of culture (standardised by taking natural logarithms) was increased markedly by the addition of TNF-alpha but unaltered by removing hydrocortisone, insulin or serum. Thus, we have shown that although variable, secretion by placental explants can be used to investigate how placental tissue adapts to different culture conditions. However, explants of the same protein content may have markedly different secretory properties.

Physico-chemical characteristics and protein adsorption potential of hydroxyapatite particles: influence on in vitro biocompatibility of ceramics after sintering.

Through the example of two HA ceramics prepared from two HA powders (HAD and HAL), we explored the relation between the physico-chemical qualities of the initial HA powder and the final HA ceramic and their influence on the protein adsorption and cell response to the final HA ceramics. The powders were characterized by XRD, FT-IR, zeta potential, and specific surface area (SSA). Their protein adsorption potential was tested after immersion in culture medium +15% of fetal calf serum. These results were correlated with the protein adsorption potential of the two ceramics (cHAD and cHAL) prepared from the HAD and HAL powders respectively and to the cell attachment after 4, 24 and 72 h on the ceramics. From our results, it appears that a relation can be established between the physico-chemical characteristics of the initial HA powders and the final biological response to the sintered ceramics prepared from these powders. An inverse relation exists between the SSA and the protein adsorption capacity of HA powders and the protein adsorption and cell attachment on HA ceramics. This inverse relation is related to phenomenon occurring during the sintering phase and the formation of inter-granular micro-porosity.

Uveitic macular edema.

Macular edema (ME) may complicate anterior, intermediate, and posterior uveitis, which may be because of various infectious, neoplastic or autoimmune etiologies. BRB breakdown is involved in the pathogenesis of Uveitic ME (UME). Optical coherence tomography has become a standard tool to confirm the diagnosis of macular thickening, due to its non-invasive, reproducible, and sensitive features. Retinal fluorescein and indocyanine green angiography is helpful to study the macula and screen for associated vasculitis, detect ischemic areas and preretinal, prepapillary or choroidal neovascular complications, and it may provide information about the etiology and be needed to assess the therapeutic response. UME due to an infection or neoplastic infiltration may require a specific treatment. If it remains persistent or occurs in other etiologies, immunomodulatory treatments may be needed. Intravitreal, subconjunctival, or subtenon corticosteroids are widely used. Their local use is contraindicated in glaucoma patients and limited by their short-lasting action. In case of bilateral sight-threatening chronic posterior uveitis, systemic treatments are usually needed, and corticosteroids are used as the standard first-line therapy. In order to reduce the daily steroid dose, immunosuppressive or immunomodulatory agents may be added, some of them being now available intravitreally. Ongoing prospective studies are assessing biotherapies and immunomodulators to determine their safety and efficacy in this indication.

Clinical workflow for personalized foot pressure ulcer prevention.

Foot pressure ulcers are a common complication of diabetes because of patient's lack of sensitivity due to neuropathy. Deep pressure ulcers appear internally when pressures applied on the foot create high internal strains nearby bony structures. Monitoring tissue strains in persons with diabetes is therefore important for an efficient prevention. We propose to use personalized biomechanical foot models to assess strains within the foot and to determine the risk of ulcer formation. Our workflow generates a foot model adapted to a patient's morphology by deforming an atlas model to conform it to the contours of segmented medical images of the patient's foot. Our biomechanical model is composed of rigid bodies for the bones, joined by ligaments and muscles, and a finite element mesh representing the soft tissues. Using our registration algorithm to conform three datasets, three new patient models were created. After applying a pressure load below these foot models, the Von Mises equivalent strains and "cluster volumes" (i.e. volumes of contiguous elements with strains above a given threshold) were measured within eight functionally meaningful foot regions. The results show the variability of both location and strain values among the three considered patients. This study also confirms that the anatomy of the foot has an influence on the risk of pressure ulcer.

Ultrastructural aspects of long-term cat placental explant culture.

Changes in tissue architecture and ultrastructure in the cat placenta during long-term explant culture have been examined over an 11-day period. Pieces of cat placenta, dissected from the lamellar region, were cultured in CMRL-1066 medium and tissue was fixed for electron microscopy at 2, 5, 7, and 11 days' culture, as well as before culture was initiated (day 0). Four samples were examined at each time point. After two days, the trophoblast basal lamina and attached cytotrophoblast cells had begun to separate from the syncytium and the cytotrophoblasts were spreading over the surface of the exposed fetal stromal compartment, and by five days were showing signs of growth. At seven days' culture, cytotrophoblast multilayering was common, and vascular and stromal components were also well preserved with collagen biosynthesis evident. By 11 days, the centre of the culture was compacted and degenerate with loss of tissue architecture, but on the outside polyp-like growths could be seen, with a well-developed covering of trophoblast containing fat and secretory droplets, lining a connective tissue matrix and stromal components. The cat placenta, therefore, like the human, has the capacity for regrowth in explant culture, including both trophoblast and stromal components.

Characterisation of long term cat placental explant cultures: uptake of taurine by system beta.

Dietary taurine is essential for cats and deficiency during pregnancy may lead to abortion, growth restriction or impaired neurological function of kittens. We previously described Na(+)- and Cl(-)-dependent taurine transport by system beta in fragments of freshly isolated cat placenta [Champion EE, Bailey SJ, Glazier JD, Jones CJP, Mann SJ, Rawlings JM, et al. Taurine uptake into cat placental tissue fragments. Placenta 2001;22:A.42]. Here we evaluate long term culture of cat placental explants as a model for the future study of chronic nutrient regulation of amino acid transport in this species. The cat placental explants displayed (i) Na(+)-dependent [(3)H]taurine uptake and (ii) taurine transporter protein on day 7 of culture, as observed in fresh cat placental fragments. The explants had preserved the ability to secrete PGF(2alpha) hormone until day 11 of culture and remained morphologically largely intact until day 7 of culture. This model of placental explant culture will provide an important in vitro method for the study of chronic regulation of amino acid transport in the cat.

[Uveitic macular edema]. / Œdème maculaire au cours des uvéites.

Macular edema may complicate anterior, intermediate, and posterior uveitis, which may be due to various infectious, tumoral, or autoimmune etiologies. Breakdown of the internal or external blood-retinal barrier is involved in the pathogenesis of inflammatory macular edema. Optical coherence tomography has become standard in confirming the diagnosis of macular thickening, due to its non-invasive, reproducible and sensitivity characteristics. Fluorescein and indocyanine green angiography allows for, in addition to study of the macula, screening for associated vasculitis, detection of ischemic areas, easy diagnosis of preretinal, prepaillary or choroidal neovascular complications, and it can provide etiological information and may be required to evaluate the therapeutic response. Treatment of inflammatory macular edema requires specific treatment in cases of infectious or tumoral etiologies. If it remains persistent, or occurs in other etiologies, anti-inflammatory treatments are needed. Steroid treatment, available in intravitreal, subconjunctival and sub-Tenon's routes, are widely used. Limitations of local use include induced cataract and glaucoma, and their short-lasting action. Such products may reveal retinal infection. Thus, bilateral chronic sight-threatening posterior uveitis often requires systemic treatment, and steroids represent the classic first-line therapy. In order to reduce the daily steroid dose, immunosuppressant or immunomodulatory drugs may be added. Certain of these compounds are now available intravitreally.

Stereospecific synthesis, assignment of absolute configuration, and biological activity of the enantiomers of 3-[[[3-[2-(7-chloroquinolin-2-yl)-(E)-ethenyl]phenyl] [[3-(dimethylamino)-3-oxopropyl]thio]methyl]thio]propionic acid, a potent and specific leukotriene D4 receptor antagonist.

The enantiomers of the leukotriene D4 antagonist 3-[[[3-[2-(7-chloroquinolin-2-yl)-(E)-ethenyl]phenyl] [[3-(dimethylamino)-3-oxopropyl]thio]methyl]thio]propionic acid (L-660,711)(MK-571) have been prepared, their absolute stereochemistry has been assigned as S for (+)-1 and R for (-)-1 by X-ray analysis of a synthetic intermediate (5), and the biological activity of the enantiomers has been explored. Unexpectedly, the enantiomers are both comparably biologically active with (+)-1 slightly more intrinsically active at the LTD4 receptor in vitro.

Development of a novel series of styrylquinoline compounds as high-affinity leukotriene D4 receptor antagonists: synthetic and structure-activity studies leading to the discovery of (+-)-3-[[[3-[2-(7-chloro-2-quinolinyl)-(E)-ethenyl]phenyl][[3- (dimethylamino)-3-oxopropyl]thio]methyl]thio]propionic acid.

Based on LTD4 receptor antagonist activity of 3-(2-quinolinyl-(E)-ethenyl)pyridine (2) found in broad screening, structure-activity studies were carried out which led to the identification of 3-[[[3-[2-(7-chloro-2-quinolinyl)-(E)-ethenyl]phenyl][[3- (dimethylamino)-3-oxopropyl]thio]methyl]thio]propionic acid (1, MK-571) as a potent and orally active LTD4 receptor antagonist. These studies demonstrated that a phenyl ring could replace the pyridine in 2 without loss of activity, that 7-halogen substitution in the quinoline group was optimal for binding, that the (E)-ethenyl linkage was optimal, that binding was enhanced by incorporation of a polar acidic group or groups in the 3-position of the aryl ring, and that two acidic groups could be incorporated via a dithioacetal formed from thiopropionic acid and the corresponding styrylquinoline 3-aldehyde to yield compounds such as 20 (IC50 = 3 nM vs [3H]LTD4 binding to the guinea pig lung membrane). It was found that one of the acidic groups could be transformed into a variety of the amides without loss of potency and that the dimethylamide 1 embodied the optimal properties of intrinsic potency (IC50 = 0.8 nM on guinea pig lung LTD4 receptor) and oral in vivo potency in the guinea pig, hyperreactive rat, and squirrel monkey. The evolution of 2 to 1 involves the increase of > 6000-fold in competition for [3H]LTD4 binding to guinea pig lung membrane and a > 40-fold increase in oral activity as measured by inhibition of antigen-induced dyspnea in hyperreactive rats.

Localization of alkaline phosphatase and Ca2+-ATPase in the cat placenta.

We localized alkaline phosphatase and plasma membrane calcium-ATPase (PMCA) in the cat placental syncytiotrophoblast to address their polarized distribution and their potential as markers for specific plasma membrane purification. We used enzyme- (alkaline phosphatase) and immuno- (PMCA) histochemistry and, for alkaline phosphatase, compared data to observations on the human placenta. Alkaline phosphatase activity in the cat was localized to the decidual cell membranes, to within the associated interstitial space and on the subjacent apical (maternal facing) plasma membrane of the syncytiotrophoblast. Occasional maternal capillaries were positive on their basal surface and there was focal staining within the syncytiotrophoblast. This widespread distribution is less specific than in the human placenta where alkaline phosphatase was restricted to the apical and basal plasma syncytiotrophoblast membranes, with much greater density on the apical membrane. Expression of PMCA in the cat was restricted to the basal membrane of the syncytiotrophoblast only. This specific localization of PMCA is identical to the human placenta and all other species in which its placental localization has been studied. We conclude that the plasma membranes of the cat syncytiotrophoblast show a broadly similar functional polarization to the human and that PMCA would prove a useful marker in isolation of the cat syncytiotrophoblast basal plasma membrane.

Polarized lactate transporter activity and expression in the syncytiotrophoblast of the term human placenta.

We investigated the polarization of l-lactate transport in human syncytiotrophoblast by measuring uptake of [(14)C] l-lactate by both microvillous (maternal-facing; MVM) and basal (fetal-facing; BM) plasma membranes. [(14)C] l-lactate uptake by MVM and BM was stimulated in the presence of an inwardly directed H(+)gradient, with a significantly higher uptake in MVM than in BM at initial rate (15.4+/-2.3 vs 5.6+/-0.6 pmol/mg protein/20 sec). Stereospecific inhibition was observed in MVM, with a higher affinity for l-lactate compared with d-lactate. In BM, there was no difference in the inhibition by these two stereoisomers. Inhibition of lactate uptake in both MVM and BM by 4,4'-diisothiocyanatostilbene-2,2'-disulfonic acid (DIDS), an inhibitor of monocarboxylate transporter (MCT) activity, indicated MCT-mediated mechanisms across both membranes. Kinetic modelling supported a two-transporter model as the best fit for both MVM and BM, the K(m)of the major component being 6.21 mm and 25.01 mm in MVM and BM respectively. Western blotting and immunolocalization examining the distribution of MCT1 and MCT4, showed that MCT expression was polarized, MCT1 being predominantly localized to BM and MCT4 showing greater abundance on MVM. CD147, a chaperone protein for MCT1 and MCT4, was equally expressed by both membranes. These studies demonstrate that the opposing plasma membranes of human syncytiotrophoblast are polarized with respect to both MCT activity and expression.

Calcium phosphate apatites with variable Ca/P atomic ratio II. Calcination and sintering.

The calcination and natural sintering of calcium deficient hydroxyapatite powders Ca(10-x)(PO4)(6-x)(HPO4)x(OH)(2-x) (with 0 < or = x < or = 1) were studied. For temperature below 700 degrees C, particle coalescence occurs without densification. The particle coalescence is associated with a reduction of the specific surface area. This surface decreases all the more as the Ca/P molar ratio of the powder is small. The mechanism agrees with a transfer of matter occurring by superficial diffusion, which is enhanced by the augmentation of vacancies in the apatitic structure (i.e. by a decrease of the Ca/P ratio). The sintering of compacted powders begins at 700 degrees C. At the same temperature, the calcium deficient hydroxyapatites dissociate into biphasic mixtures of hydroxyapatite and tricalcium phosphate. The sintering is slowed down when the content of TCP in the biphasic mixture increases. In parallel, the grain size increases. This result relates to the augmentation of the coalescence of particles at low temperature.

Calcium phosphate apatites with variable Ca/P atomic ratio I. Synthesis, characterisation and thermal stability of powders.

Single phased apatitic calcium phosphate powders Ca(10-x)(PO4)(6-x)(HPO4)x(OH)(2-x) with Ca/P molar ratio ranging from 1.5 to 1.667 (0 < or = x < or = 1) were synthesised using wet method. Outside this compositional range the powders were biphasic mixtures composed of a calcium phosphate apatite and CaHPO4 (Ca/P < 1.5) or Ca(OH)2 (Ca/P > 1.667). Temperature and pH of synthesis were the preponderant parameters for the control of the precipitate composition. The precise determination of the chemical composition requires the use of several complementary techniques and thermal treatments of powders. These techniques include high resolution and high temperature X-ray diffractometry and FTIR spectroscopy and show that very small variations of the Ca/P molar ratio of the powder lead to great changes in powder composition and characteristics after thermal treatment.

Calcium phosphate apatites with variable Ca/P atomic ratio III. Mechanical properties and degradation in solution of hot pressed ceramics.

Calcium deficient hydroxyapatite powders Ca(10-x)(PO4)(6-x)(HPO4)x(OH)(2-x) (0 < or = x < or = 1) were hot pressed to produce dense hydroxyapatite-tricalcium phosphate (HAP/TCP) biphasic materials. Ceramics hot pressed at 1000 degrees C were composed of an homogeneous distribution of the HAP and beta-TCP grains with an average size of 0.2 microm. Grain growth was observed for TCP loading > 70 wt%. The strength exhibited a maximum of sigma(f) = 150 MPa for 90/10 (w/w) HAP/TCP and it dropped for smaller and greater amounts of TCP. This value was twice that of pure HAP. When placed in Ringer's solution, only the surface of biphasic compounds was degraded after 60 days of immersion with a preferential etching of the TCP phase. After hot pressing at 1200 degrees C, grain growth was observed and the mechanical properties were decreased. This was explained by the allotropic transformation alpha/beta of TCP.

Pharmacology of L-655,240 (3-[1-(4-chlorobenzyl)-5-fluoro-3-methyl-indol-2-yl]2,2-dimethylpro pan oic acid); a potent, selective thromboxane/prostaglandin endoperoxide antagonist.

L-655,240 (3-[1-(4-chlorobenzyl)-5-fluoro-3-methyl-indol-2-yl]2,2-dimethylpropa noic acid) has been studied in vitro on the guinea-pig tracheal chain, pulmonary artery and thoracic aorta ring and shown to be a potent, competitive antagonist of contractions induced by the prostaglandin endoperoxide analogue, U-44069 (pA2 values 8.0, 8.4 and 8.0 respectively). Selectivity on the guinea-pig trachea was indicated by non-competitive antagonism of contractions induced by prostaglandin D2 and minimal activity against contractions induced by leukotriene D4, prostaglandin F2 alpha, serotonin, histamine and acetylcholine. L-655,240 was a potent inhibitor of the aggregation of washed human platelets induced by U-44069 (IC50 value 7 X 10(-9) M) and inhibited aggregation of human platelet rich plasma induced by U-44069, U-46619, thromboxane A2 and collagen but not ADP or platelet activating factor. In vivo i.v. L-655,240 administered to guinea-pigs inhibited bronchoconstriction induced by i.v. U-44069 and arachidonic acid (ED50 values 0.09 and 0.23 mg kg-1) but not histamine, acetylcholine or serotonin. When administered to rhesus monkeys (3 and 10 mg/kg p.o.), L-655,240 inhibited ex vivo platelet aggregation induced by U-44069 but not ADP. It is concluded that L-655,240 is a potent, selective, orally active thromboxane/prostaglandin endoperoxide antagonist.

About the use of stoichiometric hydroxyapatite in compression - incidence of manufacturing process on compressibility.

Literature concerning calcium phosphates in pharmacy exhibits the chemical diversity of the compounds available. Some excipient manufacturers offer hydroxyapatite as a direct compression excipient, but the chemical analysis of this compound usually shows a variability of the composition: the so-called materials can be hydroxyapatite or other calcium phosphates, uncalcined (i.e. with a low crystallinity) or calcined and well-crystallized hydroxyapatite. This study points out the incidence of the crystallinity of one compound (i.e. hydroxyapatite) on the mechanical properties. Stoichiometric hydroxyapatite is synthesized and compounds differing in their crystallinity, manufacturing process and particle size are manufactured. X-Ray diffraction analysis is used to investigate the chemical nature of the compounds. The mechanical study (study of the compression, diametral compressive strength, Heckel plots) highlights the negative effect of calcination on the mechanical properties. Porosity and specific surface area measurements show the effect of calcination on compaction. Uncalcined materials show bulk and mechanical properties in accordance with their use as direct compression excipients.

Antimicrobial susceptibility and molecular typing of MRSA in cystic fibrosis.

OBJECTIVES: The prevalence of methicillin-resistant Staphylococcus aureus (MRSA) in cystic fibrosis (CF) patients in the United States is approximately 25%. Little is known about the relative proportion of hospital- versus community-associated strains or the antimicrobial susceptibility of MRSA in different CF centers. We hypothesized that the majority of MRSA isolates obtained from children with CF are those endemic in the hospital and that those associated with community acquisition (SCCmec IV) would be more resistant than typically seen in non-CF MRSA isolates. METHODS: We studied MRSA strains from seven pediatric CF centers to determine the clonal distribution based on DNA sequencing of the staphylococcal protein A gene (spa typing), the type of staphylococcal chromosomal cassette mec (SCCmec), and the proportion of strains with Panton-Valentine leukocidin (PVL). Antimicrobial susceptibility to systemic and topical antibiotics was compared between different MRSA types. RESULTS: We analyzed 277 MRSA isolates from unique patients (mean age 11.15 ± 4.77 years, 55% male). Seventy % of isolates were SCCmec II PVL negative and the remainder SCCmec IV. Overall 17% MRSA strains were PVL positive (all SCCmec IV). Spa typing of 118 isolates showed most of the SCCmec II strains being t002, while SCCmec IV PVL positive isolates were t008, and SCCmec IV PVL negative isolates represented a variety of spa-types. The proportions of SCCmec II strains and spa-types were similar among centers. Overall rates of resistance to trimethoprim-sulfamethoxazole (4%), tetracycline (7%), tigecycline (0.4%), linezolid (0.4%) as well as fosfomycin (0.4%), fusidic acid (3%), and mupirocin (1%) were low. No strains were resistant to vancomycin. SCCmec II strains had higher rates of resistance to ciprofloxacin and clindamycin (P < 0.001) than SCCmec IV strains. CONCLUSIONS: In this U.S. study, most MRSA isolates in the pediatric CF population were SCCmec II PVL negative. Rates of resistance were low, including to older and orally available antibiotics such as trimethoprim-sulfamethoxazole.

Sintering of calcium phosphate bioceramics.

Calcium phosphate ceramics have become of prime importance for biological applications in the field of bone tissue engineering. This paper reviews the sintering behaviour of these bioceramics. Conventional pressureless sintering of hydroxyapatite, Ca10(PO4)6(OH)2, a reference compound, has been extensively studied. Its physico-chemistry is detailed. It can be seen as a competition between two thermally activated phenomena that proceed by solid-state diffusion of matter: densification and grain growth. Usually, the objective is to promote the first and prevent the second. Literature data are analysed from sintering maps (i.e. grain growth vs. densification). Sintering trajectories of hydroxyapatite produced by conventional pressureless sintering and non-conventional techniques, including two-step sintering, liquid phase sintering, hot pressing, hot isostatic pressing, ultrahigh pressure, microwave and spark plasma sintering, are presented. Whatever the sintering technique may be, grain growth occurs mainly during the last step of sintering, when the relative bulk density reaches 95% of the maximum value. Though often considered very advantageous, most assisted sintering techniques do not appear very superior to conventional pressureless sintering. Sintering of tricalcium phosphate or biphasic calcium phosphates is also discussed. The chemical composition of calcium phosphate influences the behaviour. Similarly, ionic substitutions in hydroxyapatite or in tricalcium phosphate create lattice defects that modify the sintering rate. Depending on their nature, they can either accelerate or slow down the sintering rate. The thermal stability of compounds at the sintering temperature must also be taken into account. Controlled atmospheres may be required to prevent thermal decomposition, and flash sintering techniques, which allow consolidation at low temperature, can be helpful.

Mesoporous bioactive glasses: mechanical reinforcement by means of a biomimetic process.

Mesoporous bioactive glasses (MBGs) constitute a new family of bioceramics with the fastest in vitro bioactivity studied so far. In this work, pieces with the composition 85SiO(2)-10CaO-5P(2)O(5) (mol.%) were prepared as MBGs and also by the conventional sol-gel method. After in vitro tests in simulated body fluid, the MBG pieces exhibited compression resistance twice as great than before, whereas conventional sol-gel glasses showed similar values. Scanning and transmission electron microscopy demonstrate the development of an apatite-like phase not only on the external surface, but also on the grains located within the MBGs pieces. In contrast, conventional sol-gel glasses only developed an apatite-like phase on the external surface. This work presents for the first time a new property of MBGs: the mechanical reinforcement of a bioactive glass through a biomimetic process. This ability is explained in terms of the outstanding bioactive behavior and the three-dimensional mesoporous structure that is exclusive for this bioceramics family.